kopia lustrzana https://github.com/micropython/micropython
124 wiersze
5.2 KiB
ReStructuredText
124 wiersze
5.2 KiB
ReStructuredText
Programmable IO
|
|
===============
|
|
|
|
The RP2040 has hardware support for standard communication protocols like I2C,
|
|
SPI and UART. For protocols where there is no hardware support, or where there
|
|
is a requirement of custom I/O behaviour, Programmable Input Output (PIO) comes
|
|
into play. Also, some MicroPython applications make use of a technique called
|
|
bit banging in which pins are rapidly turned on and off to transmit data. This
|
|
can make the entire process slow as the processor concentrates on bit banging
|
|
rather than executing other logic. However, PIO allows bit banging to happen
|
|
in the background while the CPU is executing the main work.
|
|
|
|
Along with the two central Cortex-M0+ processing cores, the RP2040 has two PIO
|
|
blocks each of which has four independent state machines. These state machines
|
|
can transfer data to/from other entities using First-In-First-Out (FIFO) buffers,
|
|
which allow the state machine and main processor to work independently yet also
|
|
synchronise their data. Each FIFO has four words (each of 32 bits) which can be
|
|
linked to the DMA to transfer larger amounts of data.
|
|
|
|
All PIO instructions follow a common pattern::
|
|
|
|
<instruction> .side(<side_set_value>) [<delay_value>]
|
|
|
|
The side-set ``.side(...)`` and delay ``[...]`` parts are both optional, and if
|
|
specified allow the instruction to perform more than one operation. This keeps
|
|
PIO programs small and efficient.
|
|
|
|
There are nine instructions which perform the following tasks:
|
|
|
|
- ``jmp()`` transfers control to a different part of the code
|
|
- ``wait()`` pauses until a particular action happens
|
|
- ``in_()`` shifts the bits from a source (scratch register or set of pins) to the
|
|
input shift register
|
|
- ``out()`` shifts the bits from the output shift register to a destination
|
|
- ``push()`` sends data to the RX FIFO
|
|
- ``pull()`` receives data from the TX FIFO
|
|
- ``mov()`` moves data from a source to a destination
|
|
- ``irq()`` sets or clears an IRQ flag
|
|
- ``set()`` writes a literal value to a destination
|
|
|
|
The instruction modifiers are:
|
|
|
|
- ``.side()`` sets the side-set pins at the start of the instruction
|
|
- ``[]`` delays for a certain number of cycles after execution of the instruction
|
|
|
|
There are also directives:
|
|
|
|
- ``wrap_target()`` specifies where the program execution will get continued from
|
|
- ``wrap()`` specifies the instruction where the control flow of the program will
|
|
get wrapped from
|
|
- ``label()`` sets a label for use with ``jmp()`` instructions
|
|
- ``word()`` emits a raw 16-bit value which acts as an instruction in the program
|
|
|
|
An example
|
|
----------
|
|
|
|
Take the ``pio_1hz.py`` example for a simple understanding of how to use the PIO
|
|
and state machines. Below is the code for reference.
|
|
|
|
.. code-block:: python3
|
|
|
|
# Example using PIO to blink an LED and raise an IRQ at 1Hz.
|
|
|
|
import time
|
|
from machine import Pin
|
|
import rp2
|
|
|
|
|
|
@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW)
|
|
def blink_1hz():
|
|
# Cycles: 1 + 1 + 6 + 32 * (30 + 1) = 1000
|
|
irq(rel(0))
|
|
set(pins, 1)
|
|
set(x, 31) [5]
|
|
label("delay_high")
|
|
nop() [29]
|
|
jmp(x_dec, "delay_high")
|
|
|
|
# Cycles: 1 + 7 + 32 * (30 + 1) = 1000
|
|
set(pins, 0)
|
|
set(x, 31) [6]
|
|
label("delay_low")
|
|
nop() [29]
|
|
jmp(x_dec, "delay_low")
|
|
|
|
|
|
# Create the StateMachine with the blink_1hz program, outputting on Pin(25).
|
|
sm = rp2.StateMachine(0, blink_1hz, freq=2000, set_base=Pin(25))
|
|
|
|
# Set the IRQ handler to print the millisecond timestamp.
|
|
sm.irq(lambda p: print(time.ticks_ms()))
|
|
|
|
# Start the StateMachine.
|
|
sm.active(1)
|
|
|
|
This creates an instance of class :class:`rp2.StateMachine` which runs the
|
|
``blink_1hz`` program at 2000Hz, and connects to pin 25. The ``blink_1hz``
|
|
program uses the PIO to blink an LED connected to this pin at 1Hz, and also
|
|
raises an IRQ as the LED turns on. This IRQ then calls the ``lambda`` function
|
|
which prints out a millisecond timestamp.
|
|
|
|
The ``blink_1hz`` program is a PIO assembler routine. It connects to a single
|
|
pin which is configured as an output and starts out low. The instructions do
|
|
the following:
|
|
|
|
- ``irq(rel(0))`` raises the IRQ associated with the state machine.
|
|
- The LED is turned on via the ``set(pins, 1)`` instruction.
|
|
- The value 31 is put into register X, and then there is a delay for 5 more
|
|
cycles, specified by the ``[5]``.
|
|
- The ``nop() [29]`` instruction waits for 30 cycles.
|
|
- The ``jmp(x_dec, "delay_high")`` will keep looping to the ``delay_high`` label
|
|
as long as the register X is non-zero, and will also post-decrement X. Since
|
|
X starts with the value 31 this jump will happen 31 times, so the ``nop() [29]``
|
|
runs 32 times in total (note there is also one instruction cycle taken by the
|
|
``jmp`` for each of these 32 loops).
|
|
- ``set(pins, 0)`` will turn the LED off by setting pin 25 low.
|
|
- Another 32 loops of ``nop() [29]`` and ``jmp(...)`` will execute.
|
|
- Because ``wrap_target()`` and ``wrap()`` are not specified, their default will
|
|
be used and execution of the program will wrap around from the bottom to the
|
|
top. This wrapping does not cost any execution cycles.
|
|
|
|
The entire routine takes exactly 2000 cycles of the state machine. Setting the
|
|
frequency of the state machine to 2000Hz makes the LED blink at 1Hz.
|