kopia lustrzana https://github.com/micropython/micropython
176 wiersze
4.1 KiB
Python
176 wiersze
4.1 KiB
Python
"""
|
|
I2C test for the CC3200 based boards.
|
|
A MPU-9150 sensor must be connected to the I2C bus.
|
|
"""
|
|
|
|
from machine import I2C
|
|
import os
|
|
import time
|
|
|
|
mch = os.uname().machine
|
|
if "LaunchPad" in mch:
|
|
i2c_pins = ("GP11", "GP10")
|
|
elif "WiPy" in mch:
|
|
i2c_pins = ("GP15", "GP10")
|
|
else:
|
|
raise Exception("Board not supported!")
|
|
|
|
i2c = I2C(0, I2C.MASTER, baudrate=400000)
|
|
# try initing without the peripheral id
|
|
i2c = I2C()
|
|
print(i2c)
|
|
i2c = I2C(mode=I2C.MASTER, baudrate=50000, pins=i2c_pins)
|
|
print(i2c)
|
|
|
|
i2c = I2C(0, I2C.MASTER, baudrate=100000)
|
|
print(i2c)
|
|
i2c = I2C(0, mode=I2C.MASTER, baudrate=400000)
|
|
print(i2c)
|
|
i2c = I2C(0, mode=I2C.MASTER, baudrate=400000, pins=i2c_pins)
|
|
print(i2c)
|
|
|
|
addr = i2c.scan()[0]
|
|
print(addr)
|
|
|
|
reg = bytearray(1)
|
|
reg2 = bytearray(2)
|
|
reg2_r = bytearray(2)
|
|
|
|
# reset the sensor
|
|
reg[0] |= 0x80
|
|
print(1 == i2c.writeto_mem(addr, 107, reg))
|
|
time.sleep_ms(100) # wait for the sensor to reset...
|
|
|
|
print(1 == i2c.readfrom_mem_into(addr, 107, reg)) # read the power management register 1
|
|
print(0x40 == reg[0])
|
|
|
|
# now just read one byte
|
|
data = i2c.readfrom_mem(addr, 117, 1) # read the "who am I?" register
|
|
print(0x68 == data[0])
|
|
print(len(data) == 1)
|
|
print(1 == i2c.readfrom_mem_into(addr, 117, reg)) # read the "who am I?" register again
|
|
print(0x68 == reg[0])
|
|
|
|
# now try reading two bytes
|
|
data = i2c.readfrom_mem(addr, 116, 2) # read the "who am I?" register
|
|
print(0x68 == data[1])
|
|
print(data == b"\x00\x68")
|
|
print(len(data) == 2)
|
|
print(2 == i2c.readfrom_mem_into(addr, 116, reg2)) # read the "who am I?" register again
|
|
print(0x68 == reg2[1])
|
|
print(reg2 == b"\x00\x68")
|
|
|
|
print(1 == i2c.readfrom_mem_into(addr, 107, reg)) # read the power management register 1
|
|
print(0x40 == reg[0])
|
|
# clear the sleep bit
|
|
reg[0] = 0
|
|
print(1 == i2c.writeto_mem(addr, 107, reg))
|
|
# read it back
|
|
i2c.readfrom_mem_into(addr, 107, reg)
|
|
print(0 == reg[0])
|
|
|
|
# set the sleep bit
|
|
reg[0] = 0x40
|
|
print(1 == i2c.writeto_mem(addr, 107, reg))
|
|
# read it back
|
|
i2c.readfrom_mem_into(addr, 107, reg)
|
|
print(0x40 == reg[0])
|
|
|
|
# reset the sensor
|
|
reg[0] |= 0x80
|
|
print(1 == i2c.writeto_mem(addr, 107, reg))
|
|
time.sleep_ms(100) # wait for the sensor to reset...
|
|
|
|
# now read and write two register at a time
|
|
print(2 == i2c.readfrom_mem_into(addr, 107, reg2))
|
|
print(0x40 == reg2[0])
|
|
print(0x00 == reg2[1])
|
|
# clear the sleep bit
|
|
reg2[0] = 0
|
|
# set some other bits
|
|
reg2[1] |= 0x03
|
|
print(2 == i2c.writeto_mem(addr, 107, reg2))
|
|
# read it back
|
|
i2c.readfrom_mem_into(addr, 107, reg2_r)
|
|
print(reg2 == reg2_r)
|
|
|
|
# reset the sensor
|
|
reg[0] = 0x80
|
|
print(1 == i2c.writeto_mem(addr, 107, reg))
|
|
time.sleep_ms(100) # wait for the sensor to reset...
|
|
|
|
# try some raw read and writes
|
|
reg[0] = 117 # register address
|
|
print(1 == i2c.writeto(addr, reg, stop=False)) # just write the register address
|
|
# now read
|
|
print(1 == i2c.readfrom_into(addr, reg))
|
|
print(reg[0] == 0x68)
|
|
reg[0] = 117 # register address
|
|
print(1 == i2c.writeto(addr, reg, stop=False)) # just write the register address
|
|
# now read
|
|
print(0x68 == i2c.readfrom(addr, 1)[0])
|
|
|
|
i2c.readfrom_mem_into(addr, 107, reg2)
|
|
print(0x40 == reg2[0])
|
|
print(0x00 == reg2[1])
|
|
|
|
reg2[0] = 107 # register address
|
|
reg2[1] = 0
|
|
print(2 == i2c.writeto(addr, reg2, stop=True)) # write the register address and the data
|
|
i2c.readfrom_mem_into(addr, 107, reg) # check it back
|
|
print(reg[0] == 0)
|
|
|
|
# check for memory leaks...
|
|
for i in range(0, 1000):
|
|
i2c = I2C(0, I2C.MASTER, baudrate=100000)
|
|
|
|
# test deinit
|
|
i2c = I2C(0, I2C.MASTER, baudrate=100000)
|
|
i2c.deinit()
|
|
print(i2c)
|
|
|
|
# next ones should raise
|
|
try:
|
|
i2c.scan()
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
i2c.readfrom(addr, 1)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
i2c.readfrom_into(addr, reg)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
i2c.readfrom_mem_into(addr, 107, reg)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
i2c.writeto(addr, reg, stop=False)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
i2c.writeto_mem(addr, 107, reg)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
i2c.readfrom_mem(addr, 116, 2)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
try:
|
|
I2C(1, I2C.MASTER, baudrate=100000)
|
|
except Exception:
|
|
print("Exception")
|
|
|
|
# reinitialization must work
|
|
i2c.init(baudrate=400000)
|
|
print(i2c)
|