micropython/teensy
Damien George 9e2b2a1c17 teensy/main: Remove unnecessary header includes. 2017-02-17 13:08:09 +11:00
..
core Add core files and use same toolchain as stmhal 2014-07-14 22:48:22 -07:00
memzip_files teensy: Fix execution of frozen boot.py and main.py 2016-08-22 12:31:33 +10:00
Makefile teensy: Convert to use builtin help function. 2017-01-22 11:56:16 +11:00
README.md teensy: Update the README with OSX specific information and tips. 2016-06-06 10:26:50 +01:00
add-memzip.sh Added memzip filesystem support for teensy 2014-01-11 16:16:20 -08:00
hal_ftm.c Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
hal_ftm.h Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
hal_gpio.c Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
help.c teensy: Convert to use builtin help function. 2017-01-22 11:56:16 +11:00
lcd.c teensy: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:13:30 +00:00
led.c py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*. 2016-01-11 00:49:27 +00:00
led.h Updated teensy to build. 2014-06-15 22:48:05 -07:00
lexerfrozen.c teensy: Switch over to using frozen modules instead of memzip 2015-11-04 14:21:21 +00:00
lexermemzip.h Added memzip filesystem support for teensy 2014-01-11 16:16:20 -08:00
main.c teensy/main: Remove unnecessary header includes. 2017-02-17 13:08:09 +11:00
make-pins.py Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
mk20dx256.ld Updated teensy to build. 2014-06-15 22:48:05 -07:00
mk20dx256_af.csv Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
mk20dx256_prefix.c teensy: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:13:30 +00:00
modpyb.c py: Be more specific with MP_DECLARE_CONST_FUN_OBJ macros. 2016-10-21 16:26:01 +11:00
mpconfigport.h teensy: Convert to use builtin help function. 2017-01-22 11:56:16 +11:00
pin_defs_teensy.c all: Add py/mphal.h and use it in all ports. 2015-10-31 19:14:30 +03:00
pin_defs_teensy.h Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
qstrdefsport.h py: Add rules for automated extraction of qstrs from sources. 2016-04-16 13:18:09 +01:00
reg.c teensy: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:13:30 +00:00
reg.h Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
servo.c py: Change nlr_jump to nlr_raise, to aid in debugging. 2014-04-05 18:32:08 +01:00
servo.h py: Be more specific with MP_DECLARE_CONST_FUN_OBJ macros. 2016-10-21 16:26:01 +11:00
std.h teensy: Fix function prototype. 2015-04-05 22:15:37 +03:00
teensy_hal.c all: Add py/mphal.h and use it in all ports. 2015-10-31 19:14:30 +03:00
teensy_hal.h teensy: Update to provide new mp_hal_pin_XXX functions following stmhal. 2016-10-18 15:34:17 +11:00
teensy_pins.csv Add Timer support (PWM, OC, IC) for stmhal and teensy 2014-09-19 09:26:13 -07:00
timer.c all: Consistently update signatures of .make_new and .call methods. 2017-01-04 16:10:42 +03:00
timer.h Add pulse_width_percent to teensy. 2014-09-23 23:19:36 -07:00
uart.c py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*. 2016-01-11 00:49:27 +00:00
usb.c teensy: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:13:30 +00:00
usb.h stmhal: Make pybstdio usable by other ports, and use it. 2015-02-13 15:04:53 +00:00

README.md

Build Instructions for Teensy 3.1

Currently the Teensy 3.1 port of MicroPython builds under Linux and not under Windows.

The tool chain required for the build can be found at https://launchpad.net/gcc-arm-embedded.

Download the current Linux *.tar.bz2 file. Instructions regarding unpacking the file and moving it to the correct location as well as adding the extracted folders to the enviroment variable can be found at http://eliaselectronics.com/stm32f4-tutorials/setting-up-the-stm32f4-arm-development-toolchain/

In order to download the firmware image to the teensy, you'll need to use the downloader included with TeensyDuino. The following assumes that you have TeensyDuino installed and set the ARDUINO environment variable pointing to the where Arduino with TeensyDuino is installed.

cd teensy
ARDUINO=~/arduino-1.0.5 make

To upload micropython to the Teensy 3.1.

Press the Program button on the Teensy 3.1

sudo ARDUINO=~/arduino-1.0.5/ make deploy

Currently, the Python prompt is through the USB serial interface, i.e.

minicom -D /dev/ttyACM0

TIPS

Install 49-teensy.rules into /etc/udev/rules.d

If you install the 49-teensy.rules file from http://www.pjrc.com/teensy/49-teensy.rules into your /etc/udev/rules.d folder then you won't need to use sudo:

sudo cp ~/Downloads/49-teensy.rules /etc/udev/rules.d
sudo udevadm control --reload-rules

Unplug and replug the teensy board, and then you can use: ARDUINO=~/arduino-1.0.5/ make deploy

Create a GNUmakefile to hold your ARDUINO setting.

Create a file call GNUmakefile (note the lowercase m) in the teensy folder with the following contents:

$(info Executing GNUmakefile)

ARDUINO=${HOME}/arduino-1.0.5
$(info ARDUINO=${ARDUINO})

include Makefile

GNUmakefile is not checked into the source code control system, so it will retain your settings when updating your source tree. You can also add additional Makefile customizations this way.

Tips for OSX

Set the ARDUINO environment variable to the location where Arduino with TeensyDuino is installed.

export ARDUINO=~/Downloads/Arduino.app/Contents/Java/

Search /dev/ for USB port name, which will be cu.usbmodem followed by a few numbers. The name of the port maybe different depending on the version of OSX. To access the Python prompt type:

screen <devicename> 115200