kopia lustrzana https://github.com/micropython/micropython
470 wiersze
16 KiB
ReStructuredText
470 wiersze
16 KiB
ReStructuredText
.. _samd_quickref:
|
|
|
|
Quick reference for the SAMD21/SAMD51 family
|
|
============================================
|
|
|
|
.. image:: img/itsybitsy_m4_express.jpg
|
|
:alt: Adafruit ItsyBitsy M4 Express board
|
|
:width: 640px
|
|
|
|
The Adafruit ItsyBitsy M4 Express board.
|
|
|
|
Below is a quick reference for SAMD21/SAMD51-based boards. If it is your first time
|
|
working with this board it may be useful to get an overview of the microcontroller:
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
general.rst
|
|
tutorial/intro.rst
|
|
pinout.rst
|
|
|
|
|
|
Installing MicroPython
|
|
----------------------
|
|
|
|
See the corresponding section of tutorial: :ref:`samd_intro`. It also includes
|
|
a troubleshooting subsection.
|
|
|
|
General board control
|
|
---------------------
|
|
|
|
The MicroPython REPL is on the USB port, configured in VCP mode.
|
|
Tab-completion is useful to find out what methods an object has.
|
|
Paste mode (Ctrl-E) is useful to paste a large slab of Python code into
|
|
the REPL.
|
|
|
|
The :mod:`machine` module::
|
|
|
|
import machine
|
|
|
|
machine.freq() # get the current frequency of the CPU
|
|
machine.freq(96_000_000) # set the CPU frequency to 96 MHz
|
|
|
|
The range accepted by the function call is 1_000_000 to 200_000_000 (1 MHz to 200 MHz)
|
|
for SAMD51 and 1_000_000 to 48_000_000 (1 MHz to 48 MHz) for SAMD21. The safe
|
|
range for SAMD51 according to the data sheet is 96 MHz to 120 MHz.
|
|
At frequencies below 8 MHz USB will be disabled. Changing the frequency below 48 MHz
|
|
impacts the baud rates of UART, I2C and SPI. These have to be set again after
|
|
changing the CPU frequency. The ms and µs timers are not affected by the frequency
|
|
change.
|
|
|
|
|
|
Delay and timing
|
|
----------------
|
|
|
|
Use the :mod:`time <time>` module::
|
|
|
|
import time
|
|
|
|
time.sleep(1) # sleep for 1 second
|
|
time.sleep_ms(500) # sleep for 500 milliseconds
|
|
time.sleep_us(10) # sleep for 10 microseconds
|
|
start = time.ticks_ms() # get millisecond counter
|
|
delta = time.ticks_diff(time.ticks_ms(), start) # compute time difference
|
|
|
|
|
|
Clock and time
|
|
--------------
|
|
|
|
Two groups of functions are provided for time information. All boards have the
|
|
datetime(), mktime() and time() functions. Boards with a 32kHz crystal also
|
|
provide an RTC() module. The epoch start date is 1.1.2000.
|
|
|
|
Use the :mod:`time <time>` module::
|
|
|
|
import time
|
|
|
|
date_time = time.localtime() # Show the actual date/time information
|
|
date_time = time.localtime(seconds) # decode the date/time form the seconds value
|
|
seconds = time.mktime(date_time_tuple) # Convert seconds to a datetime tuple
|
|
second = time.time() # Return the actual system time.
|
|
|
|
The format of the date_time tuple follows the standard. The µs value of the date_time
|
|
tuple is ignored. On boards without the RTC module, time.localtime(seconds) sets the
|
|
system time. Use of the Use the :mod:`RTC <RTC>` module::
|
|
|
|
from machine import RTC
|
|
rtc = RTC()
|
|
date_time = rtc.datetime() # return the actual date & time.
|
|
rtc.datetime(date_time_tuple) # Set date & time, ignoring weekday
|
|
date_time = rtc.now() # Return date & time in Unix order.
|
|
rtc.calibration(value) # Set a calibration factor
|
|
|
|
The weekday value set will be ignored and calculated in the returned tuple from the
|
|
actual date. rtc.now() is only provided at SAMD51 boards. The value used in the
|
|
rtc.calibration() call has a range from -127 - 127. It defines roughly a
|
|
ppm quantity, by which the clock can run faster or slower.
|
|
|
|
|
|
Timers
|
|
------
|
|
|
|
The SAMD21/SAMD51 uses software timers. Use the :ref:`machine.Timer <machine.Timer>` class::
|
|
|
|
from machine import Timer
|
|
|
|
tim0 = Timer()
|
|
tim0.init(period=5000, mode=Timer.ONE_SHOT, callback=lambda t:print(0))
|
|
|
|
tim1 = Timer()
|
|
tim1.init(period=2000, mode=Timer.PERIODIC, callback=lambda t:print(1))
|
|
|
|
The period is in milliseconds.
|
|
|
|
.. _samd_Pins_and_GPIO:
|
|
|
|
Pins and GPIO
|
|
-------------
|
|
|
|
Use the :ref:`machine.Pin <machine.Pin>` class::
|
|
|
|
from machine import Pin
|
|
|
|
p0 = Pin('D0', Pin.OUT) # create output pin on GPIO0
|
|
p0.on() # set pin to "on" (high) level
|
|
p0.off() # set pin to "off" (low) level
|
|
p0.value(1) # set pin to on/high
|
|
|
|
p2 = Pin('D2', Pin.IN) # create input pin on GPIO2
|
|
print(p2.value()) # get value, 0 or 1
|
|
|
|
p4 = Pin('D4', Pin.IN, Pin.PULL_UP) # enable internal pull-up resistor
|
|
p7 = Pin("PA07", Pin.OUT, value=1) # set pin high on creation
|
|
|
|
Pins can be denoted by a string or a number. The string is either the
|
|
pin label of the respective board, like "D0" or "SDA", or in the form
|
|
"Pxnn", where x is A,B,C or D, and nn a two digit number in the range 0-31.
|
|
Examples: "PA03", PD31".
|
|
|
|
Pin numbers are the MCU port numbers in the range::
|
|
|
|
PA0..PA31: 0..31
|
|
PB0..PB31: 32..63
|
|
PC0..PC31: 64..95
|
|
PD0..PD31: 96..127
|
|
|
|
Note: On Adafruit Feather and ItsyBity boards, pin D5 is connected to an external
|
|
gate output and can therefore only be used as input.
|
|
|
|
UART (serial bus)
|
|
-----------------
|
|
|
|
See :ref:`machine.UART <machine.UART>`. ::
|
|
|
|
# Use UART 3 on a ItsyBitsy M4 board
|
|
from machine import UART
|
|
|
|
uart3 = UART(3, tx=Pin(1), rx=Pin(0), baudrate=115200)
|
|
uart3.write('hello') # write 5 bytes
|
|
uart3.read(5) # read up to 5 bytes
|
|
|
|
The SAMD21/SAMD51 MCUs have up to eight hardware so called SERCOM devices, which can be used as UART,
|
|
SPI or I2C device, but not every MCU variant and board exposes all
|
|
TX and RX pins for users. For the assignment of Pins to devices and UART signals,
|
|
refer to the :ref:`SAMD pinout <samd_pinout>`.
|
|
|
|
PWM (pulse width modulation)
|
|
----------------------------
|
|
|
|
Up to five timer device of the SAMD21/SAMD51 MCUs are used for creating PWM signals.
|
|
|
|
The PWM functions are provided by the :ref:`machine.PWM <machine.PWM>` class.
|
|
It supports all basic methods listed for that class. ::
|
|
|
|
# Samples for Adafruit ItsyBitsy M4 Express
|
|
|
|
from machine import Pin, PWM
|
|
|
|
pwm = PWM(Pin(7)) # create PWM object from a pin
|
|
pwm.freq() # get current frequency
|
|
pwm.freq(1000) # set frequency
|
|
pwm.duty_u16() # get current duty cycle, range 0-65535
|
|
pwm.duty_u16(200) # set duty cycle, range 0-65535
|
|
pwm.deinit() # turn off PWM on the pin
|
|
|
|
pwm # show the PWM objects properties
|
|
|
|
|
|
PWM Constructor
|
|
```````````````
|
|
|
|
.. class:: PWM(dest, freq, duty_u16, duty_ns, *, invert, device)
|
|
:noindex:
|
|
|
|
Construct and return a new PWM object using the following parameters:
|
|
|
|
- *dest* is the Pin object on which the PWM is output.
|
|
|
|
PWM objects are provided by TCC timer module. The TCC timer modules have up
|
|
to six channels and eight outputs. All channels of a module run at the same
|
|
frequency, but allow for different duty cycles. Outputs are assigned to channels
|
|
in modulo-n fashion, where n is the number of channels. Outputs of a channel
|
|
have the same frequency and duty rate, but may have different polarity.
|
|
So if for instance a module has four channels, output 0 and 4, 1 and 5,
|
|
2 and 6, 3, and 7 share the same frequency and duty rate.
|
|
|
|
Only one of *duty_u16* and *duty_ns* should be specified at a time.
|
|
|
|
Keyword arguments:
|
|
|
|
- *freq* should be an integer which sets the frequency in Hz for the
|
|
PWM cycle. The valid frequency range is 1 Hz to 24 MHz.
|
|
- *duty_u16* sets the duty cycle as a ratio ``duty_u16 / 65536``.
|
|
The duty cycle of a X channel can only be changed, if the A and B channel
|
|
of the respective submodule is not used. Otherwise the duty_16 value of the
|
|
X channel is 32768 (50%).
|
|
- *duty_ns* sets the pulse width in nanoseconds. The limitation for X channels
|
|
apply as well.
|
|
- *invert*\=True|False. Setting a bit inverts the respective output.
|
|
- *device*\=n Use TCC module n if available. At some pins two TCC modules could be
|
|
used. If not device is mentioned, the software tries to use a module which is not yet
|
|
used for a PWM signal. But if pins shall have the same frequency and/or duty cycle
|
|
to be changed synchronously, they must be driven by the same TCC module.
|
|
|
|
PWM Methods
|
|
```````````
|
|
|
|
The methods are identical to the generic :ref:`machine.PWM <machine.PWM>` class,
|
|
with additional keyword arguments to the init() method, matchings those of the constructor.
|
|
|
|
PWM Pin Assignment
|
|
``````````````````
|
|
|
|
Pins are specified in the same way as for the Pin class. For the assignment of Pins
|
|
to PWM signals, refer to the :ref:`SAMD pinout <samd_pinout>`.
|
|
|
|
ADC (analog to digital conversion)
|
|
----------------------------------
|
|
|
|
On the SAMD21/SAMD51 ADC functionality is available on Pins labelled 'Ann'.
|
|
|
|
Use the :ref:`machine.ADC <machine.ADC>` class::
|
|
|
|
from machine import ADC
|
|
|
|
adc0 = ADC(Pin("A0")) # create ADC object on ADC pin, average=16
|
|
adc0.read_u16() # read value, 0-65536 across voltage range 0.0v - 3.3v
|
|
adc1 = ADC(Pin("A1"), average=1) # create ADC object on ADC pin, average=1
|
|
|
|
The resolution of the ADC is 12 bit with 12 bit accuracy, irrespective of the
|
|
value returned by read_u16(). If you need a higher resolution or better accuracy, use
|
|
an external ADC.
|
|
|
|
ADC Constructor
|
|
```````````````
|
|
|
|
.. class:: ADC(dest, *, average=16)
|
|
:noindex:
|
|
|
|
Construct and return a new ADC object using the following parameters:
|
|
|
|
- *dest* is the Pin object on which the ADC is output.
|
|
|
|
Keyword arguments:
|
|
|
|
- *average* is used to reduce the noise. With a value of 16 the LSB noise is about 1 digit.
|
|
|
|
DAC (digital to analog conversion)
|
|
----------------------------------
|
|
|
|
The DAC class provides a fast digital to analog conversion. Usage example::
|
|
|
|
from machine import DAC
|
|
|
|
dac0 = DAC(0) # create DAC object on DAC pin A0
|
|
dac0.write(1023) # write value, 0-4095 across voltage range 0.0v - 3.3v
|
|
dac1 = DAC(1) # create DAC object on DAC pin A1
|
|
dac1.write(2000) # write value, 0-4095 across voltage range 0.0v - 3.3v
|
|
|
|
The resolution of the DAC is 12 bit for SAMD51 and 10 bit for SAMD21. SAMD21 devices
|
|
have 1 DAC channel at GPIO PA02, SAMD51 devices have 2 DAC channels at GPIO PA02 and PA05.
|
|
|
|
Software SPI bus
|
|
----------------
|
|
|
|
Software SPI (using bit-banging) works on all pins, and is accessed via the
|
|
:ref:`machine.SoftSPI <machine.SoftSPI>` class. ::
|
|
|
|
from machine import Pin, SoftSPI
|
|
|
|
# construct a SoftSPI bus on the given pins
|
|
# polarity is the idle state of SCK
|
|
# phase=0 means sample on the first edge of SCK, phase=1 means the second
|
|
spi = SoftSPI(baudrate=100000, polarity=1, phase=0, sck=Pin(7), mosi=Pin(9), miso=Pin(10))
|
|
|
|
spi.init(baudrate=200000) # set the baud rate
|
|
|
|
spi.read(10) # read 10 bytes on MISO
|
|
spi.read(10, 0xff) # read 10 bytes while outputting 0xff on MOSI
|
|
|
|
buf = bytearray(50) # create a buffer
|
|
spi.readinto(buf) # read into the given buffer (reads 50 bytes in this case)
|
|
spi.readinto(buf, 0xff) # read into the given buffer and output 0xff on MOSI
|
|
|
|
spi.write(b'12345') # write 5 bytes on MOSI
|
|
|
|
buf = bytearray(4) # create a buffer
|
|
spi.write_readinto(b'1234', buf) # write to MOSI and read from MISO into the buffer
|
|
spi.write_readinto(buf, buf) # write buf to MOSI and read MISO back into buf
|
|
|
|
The highest supported baud rate is 500000.
|
|
|
|
Hardware SPI bus
|
|
----------------
|
|
|
|
The SAMD21/SAMD51 MCUs have up to eight hardware so called SERCOM devices, which can be used as UART,
|
|
SPI or I2C device, but not every MCU variant and board exposes all
|
|
signal pins for users. Hardware SPI is accessed via the
|
|
:ref:`machine.SPI <machine.SPI>` class and has the same methods as software SPI above::
|
|
|
|
from machine import SPI
|
|
|
|
spi = SPI(1, sck=Pin("SCK"), mosi=Pin("MOSI"), miso=Pin("MISO"), baudrate=10000000)
|
|
spi.write('Hello World')
|
|
|
|
If miso is not specified, it is not used. For the assignment of Pins to SPI devices and signals, refer to
|
|
:ref:`SAMD pinout <samd_pinout>`.
|
|
|
|
Note: Even if the highest reliable baud rate at the moment is about 24 Mhz,
|
|
setting a baud rate will not always result in exactly that frequency, especially
|
|
at high baud rates.
|
|
|
|
Software I2C bus
|
|
----------------
|
|
|
|
Software I2C (using bit-banging) works on all output-capable pins, and is
|
|
accessed via the :ref:`machine.SoftI2C <machine.SoftI2C>` class::
|
|
|
|
from machine import Pin, SoftI2C
|
|
|
|
i2c = SoftI2C(scl=Pin(10), sda=Pin(11), freq=100000)
|
|
|
|
i2c.scan() # scan for devices
|
|
|
|
i2c.readfrom(0x3a, 4) # read 4 bytes from device with address 0x3a
|
|
i2c.writeto(0x3a, '12') # write '12' to device with address 0x3a
|
|
|
|
buf = bytearray(10) # create a buffer with 10 bytes
|
|
i2c.writeto(0x3a, buf) # write the given buffer to the slave
|
|
|
|
The highest supported freq is 400000.
|
|
|
|
Hardware I2C bus
|
|
----------------
|
|
|
|
The SAMD21/SAMD51 MCUs have up to eight hardware so called SERCOM devices,
|
|
which can be used as UART, SPI or I2C device, but not every MCU variant
|
|
and board exposes all signal pins for users.
|
|
For the assignment of Pins to devices and I2C signals, refer to :ref:`SAMD pinout <samd_pinout>`.
|
|
|
|
Hardware I2C is accessed via the :ref:`machine.I2C <machine.I2C>` class and
|
|
has the same methods as software SPI above::
|
|
|
|
from machine import I2C
|
|
|
|
i2c = I2C(2, scl=Pin("SCL"), sda=Pin("SDA"), freq=400_000)
|
|
i2c.writeto(0x76, b"Hello World")
|
|
|
|
OneWire driver
|
|
--------------
|
|
|
|
The OneWire driver is implemented in software and works on all pins::
|
|
|
|
from machine import Pin
|
|
import onewire
|
|
|
|
ow = onewire.OneWire(Pin(12)) # create a OneWire bus on GPIO12
|
|
ow.scan() # return a list of devices on the bus
|
|
ow.reset() # reset the bus
|
|
ow.readbyte() # read a byte
|
|
ow.writebyte(0x12) # write a byte on the bus
|
|
ow.write('123') # write bytes on the bus
|
|
ow.select_rom(b'12345678') # select a specific device by its ROM code
|
|
|
|
There is a specific driver for DS18S20 and DS18B20 devices::
|
|
|
|
import time, ds18x20
|
|
ds = ds18x20.DS18X20(ow)
|
|
roms = ds.scan()
|
|
ds.convert_temp()
|
|
time.sleep_ms(750)
|
|
for rom in roms:
|
|
print(ds.read_temp(rom))
|
|
|
|
Be sure to put a 4.7k pull-up resistor on the data line. Note that
|
|
the ``convert_temp()`` method must be called each time you want to
|
|
sample the temperature.
|
|
|
|
DHT driver
|
|
----------
|
|
|
|
The DHT driver is implemented in software and works on all pins::
|
|
|
|
import dht
|
|
import machine
|
|
|
|
d = dht.DHT11(machine.Pin(4))
|
|
d.measure()
|
|
d.temperature() # eg. 23 (°C)
|
|
d.humidity() # eg. 41 (% RH)
|
|
|
|
d = dht.DHT22(machine.Pin(4))
|
|
d.measure()
|
|
d.temperature() # eg. 23.6 (°C)
|
|
d.humidity() # eg. 41.3 (% RH)
|
|
|
|
Be sure to have a 4.7k pull-up resistor on the data line. Some
|
|
DHT modules may already have one.
|
|
|
|
Driving an APA102 LED
|
|
---------------------
|
|
|
|
The APA102 on some Adafruit boards can be controlled using SoftSPI::
|
|
|
|
from machine import SoftSPI, Pin
|
|
# create the SPI object. miso can be any unused pin.
|
|
spi=SoftSPI(sck=Pin(25), mosi=Pin(26), miso=Pin(14))
|
|
|
|
# define a little function that writes the data with
|
|
# preamble and postfix
|
|
def write(red, green, blue):
|
|
spi.write(b"\x00\x00\x00\x00\xff")
|
|
spi.write(bytearray((blue, green, red)))
|
|
spi.write(b"\xff\xff\xff")
|
|
|
|
# set the LED to red
|
|
write(128, 0, 0)
|
|
|
|
Since SoftSPI does not allow miso to be undefined, miso has to be
|
|
assigned to an otherwise unused pin.
|
|
|
|
Driving a Neopixel LED
|
|
----------------------
|
|
|
|
The built-in machine.bitstream() method supports driving Neopixel LEDs in combination
|
|
with the Neopixel driver from the MicroPython driver library::
|
|
|
|
import neopixel
|
|
import machine
|
|
|
|
# 1 LED connected to Pin D8 on Adafruit Feather boards
|
|
p = machine.Pin(8, machine.Pin.OUT)
|
|
n = neopixel.NeoPixel(p, 1)
|
|
|
|
# set the led to red.
|
|
n[0] = (128, 0, 0)
|
|
|
|
# Update the LED.
|
|
n.write()
|
|
|
|
machine.bitstream() is set up for a SAMD21 clock frequency of 48MHz and a SAMD51
|
|
clock frequency of 120 MHz. At other clock frequencies, the timing will not fit.
|
|
|
|
Transferring files
|
|
------------------
|
|
|
|
Files can be transferred to the SAMD21/SAMD51 devices for instance with the
|
|
:ref:`mpremote <mpremote>` tool. See the MicroPython forum for community-supported
|
|
alternatives to transfer files to an SAMD21/SAMD51 board, like rshell or Thonny.
|