mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/tools/ci.sh

715 wiersze
24 KiB
Bash
Executable File
Czysty Bezpośredni odnośnik Wina Historia

#!/bin/bash
if which nproc > /dev/null; then
MAKEOPTS="-j$(nproc)"
else
MAKEOPTS="-j$(sysctl -n hw.ncpu)"
fi
# Ensure known OPEN_MAX (NO_FILES) limit.
ulimit -n 1024
########################################################################################
# general helper functions
function ci_gcc_arm_setup {
sudo apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi
arm-none-eabi-gcc --version
}
########################################################################################
# c code formatting
function ci_c_code_formatting_setup {
sudo apt-get install uncrustify
uncrustify --version
}
function ci_c_code_formatting_run {
# Only run on C files. The ruff rule runs separately on Python.
tools/codeformat.py -v -c
}
########################################################################################
# commit formatting
function ci_commit_formatting_run {
git remote add upstream https://github.com/micropython/micropython.git
git fetch --depth=100 upstream master
# If the common ancestor commit hasn't been found, fetch more.
git merge-base upstream/master HEAD || git fetch --unshallow upstream master
# For a PR, upstream/master..HEAD ends with a merge commit into master, exclude that one.
tools/verifygitlog.py -v upstream/master..HEAD --no-merges
}
########################################################################################
# code size
function ci_code_size_setup {
sudo apt-get update
sudo apt-get install gcc-multilib
gcc --version
ci_gcc_arm_setup
}
function ci_code_size_build {
# check the following ports for the change in their code size
PORTS_TO_CHECK=bmusxpd
SUBMODULES="lib/asf4 lib/berkeley-db-1.xx lib/mbedtls lib/micropython-lib lib/nxp_driver lib/pico-sdk lib/stm32lib lib/tinyusb"
# starts off at either the ref/pull/N/merge FETCH_HEAD, or the current branch HEAD
git checkout -b pull_request # save the current location
git remote add upstream https://github.com/micropython/micropython.git
git fetch --depth=100 upstream master
# If the common ancestor commit hasn't been found, fetch more.
git merge-base upstream/master HEAD || git fetch --unshallow upstream master
# build reference, save to size0
# ignore any errors with this build, in case master is failing
git checkout `git merge-base --fork-point upstream/master pull_request`
git submodule update --init $SUBMODULES
git show -s
tools/metrics.py clean $PORTS_TO_CHECK
tools/metrics.py build $PORTS_TO_CHECK | tee ~/size0 || true
# build PR/branch, save to size1
git checkout pull_request
git submodule update --init $SUBMODULES
git log upstream/master..HEAD
tools/metrics.py clean $PORTS_TO_CHECK
tools/metrics.py build $PORTS_TO_CHECK | tee ~/size1
}
########################################################################################
# .mpy file format
function ci_mpy_format_setup {
sudo pip3 install pyelftools
}
function ci_mpy_format_test {
# Test mpy-tool.py dump feature on bytecode
python2 ./tools/mpy-tool.py -xd tests/frozen/frozentest.mpy
python3 ./tools/mpy-tool.py -xd tests/frozen/frozentest.mpy
# Test mpy-tool.py dump feature on native code
make -C examples/natmod/features1
./tools/mpy-tool.py -xd examples/natmod/features1/features1.mpy
}
########################################################################################
# ports/cc3200
function ci_cc3200_setup {
ci_gcc_arm_setup
}
function ci_cc3200_build {
make ${MAKEOPTS} -C ports/cc3200 BTARGET=application BTYPE=release
make ${MAKEOPTS} -C ports/cc3200 BTARGET=bootloader BTYPE=release
}
########################################################################################
# ports/esp32
# GitHub tag of ESP-IDF to use for CI (note: must be a tag or a branch)
IDF_VER=v5.0.4
export IDF_CCACHE_ENABLE=1
function ci_esp32_idf_setup {
pip3 install pyelftools
git clone --depth 1 --branch $IDF_VER https://github.com/espressif/esp-idf.git
# doing a treeless clone isn't quite as good as --shallow-submodules, but it
# is smaller than full clones and works when the submodule commit isn't a head.
git -C esp-idf submodule update --init --recursive --filter=tree:0
./esp-idf/install.sh
}
function ci_esp32_build_common {
source esp-idf/export.sh
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/esp32 submodules
}
function ci_esp32_build_cmod_spiram_s2 {
ci_esp32_build_common
make ${MAKEOPTS} -C ports/esp32 \
USER_C_MODULES=../../../examples/usercmodule/micropython.cmake \
FROZEN_MANIFEST=$(pwd)/ports/esp32/boards/manifest_test.py
# Test building native .mpy with xtensawin architecture.
ci_native_mpy_modules_build xtensawin
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC BOARD_VARIANT=SPIRAM
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_S2
}
function ci_esp32_build_s3_c3 {
ci_esp32_build_common
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_S3
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_C3
}
########################################################################################
# ports/esp8266
function ci_esp8266_setup {
sudo pip install pyserial esptool==3.3.1
wget https://github.com/jepler/esp-open-sdk/releases/download/2018-06-10/xtensa-lx106-elf-standalone.tar.gz
zcat xtensa-lx106-elf-standalone.tar.gz | tar x
# Remove this esptool.py so pip version is used instead
rm xtensa-lx106-elf/bin/esptool.py
}
function ci_esp8266_path {
echo $(pwd)/xtensa-lx106-elf/bin
}
function ci_esp8266_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/esp8266 submodules
make ${MAKEOPTS} -C ports/esp8266 BOARD=ESP8266_GENERIC
make ${MAKEOPTS} -C ports/esp8266 BOARD=ESP8266_GENERIC BOARD_VARIANT=FLASH_512K
make ${MAKEOPTS} -C ports/esp8266 BOARD=ESP8266_GENERIC BOARD_VARIANT=FLASH_1M
}
########################################################################################
# ports/webassembly
function ci_webassembly_setup {
npm install terser
git clone https://github.com/emscripten-core/emsdk.git
(cd emsdk && ./emsdk install latest && ./emsdk activate latest)
}
function ci_webassembly_build {
source emsdk/emsdk_env.sh
make ${MAKEOPTS} -C ports/webassembly VARIANT=pyscript submodules
make ${MAKEOPTS} -C ports/webassembly VARIANT=pyscript
}
function ci_webassembly_run_tests {
make -C ports/webassembly VARIANT=pyscript test_min
}
########################################################################################
# ports/mimxrt
function ci_mimxrt_setup {
ci_gcc_arm_setup
}
function ci_mimxrt_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/mimxrt BOARD=MIMXRT1020_EVK submodules
make ${MAKEOPTS} -C ports/mimxrt BOARD=MIMXRT1020_EVK
make ${MAKEOPTS} -C ports/mimxrt BOARD=TEENSY40 submodules
make ${MAKEOPTS} -C ports/mimxrt BOARD=TEENSY40
}
########################################################################################
# ports/nrf
function ci_nrf_setup {
ci_gcc_arm_setup
}
function ci_nrf_build {
ports/nrf/drivers/bluetooth/download_ble_stack.sh s140_nrf52_6_1_1
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/nrf submodules
make ${MAKEOPTS} -C ports/nrf BOARD=PCA10040
make ${MAKEOPTS} -C ports/nrf BOARD=MICROBIT
make ${MAKEOPTS} -C ports/nrf BOARD=PCA10056 SD=s140
make ${MAKEOPTS} -C ports/nrf BOARD=PCA10090
}
########################################################################################
# ports/powerpc
function ci_powerpc_setup {
sudo apt-get update
sudo apt-get install gcc-powerpc64le-linux-gnu libc6-dev-ppc64el-cross
}
function ci_powerpc_build {
make ${MAKEOPTS} -C ports/powerpc UART=potato
make ${MAKEOPTS} -C ports/powerpc UART=lpc_serial
}
########################################################################################
# ports/qemu-arm
function ci_qemu_arm_setup {
ci_gcc_arm_setup
sudo apt-get update
sudo apt-get install qemu-system
qemu-system-arm --version
}
function ci_qemu_arm_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/qemu-arm submodules
make ${MAKEOPTS} -C ports/qemu-arm CFLAGS_EXTRA=-DMP_ENDIANNESS_BIG=1
make ${MAKEOPTS} -C ports/qemu-arm clean
make ${MAKEOPTS} -C ports/qemu-arm -f Makefile.test submodules
make ${MAKEOPTS} -C ports/qemu-arm -f Makefile.test test
make ${MAKEOPTS} -C ports/qemu-arm -f Makefile.test clean
make ${MAKEOPTS} -C ports/qemu-arm -f Makefile.test BOARD=sabrelite test
}
########################################################################################
# ports/renesas-ra
function ci_renesas_ra_setup {
ci_gcc_arm_setup
sudo apt-get install protobuf-c-compiler
}
function ci_renesas_ra_board_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/renesas-ra submodules
make ${MAKEOPTS} -C ports/renesas-ra BOARD=RA4M1_CLICKER
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA6M2
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA6M1
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA4M1
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA4W1
make ${MAKEOPTS} -C ports/renesas-ra BOARD=ARDUINO_PORTENTA_C33 submodules
make ${MAKEOPTS} -C ports/renesas-ra BOARD=ARDUINO_PORTENTA_C33
}
########################################################################################
# ports/rp2
function ci_rp2_setup {
ci_gcc_arm_setup
}
function ci_rp2_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/rp2 submodules
make ${MAKEOPTS} -C ports/rp2
make ${MAKEOPTS} -C ports/rp2 BOARD=RPI_PICO_W submodules
make ${MAKEOPTS} -C ports/rp2 BOARD=RPI_PICO_W USER_C_MODULES=../../examples/usercmodule/micropython.cmake
make ${MAKEOPTS} -C ports/rp2 BOARD=W5100S_EVB_PICO submodules
make ${MAKEOPTS} -C ports/rp2 BOARD=W5100S_EVB_PICO
# Test building ninaw10 driver and NIC interface.
make ${MAKEOPTS} -C ports/rp2 BOARD=ARDUINO_NANO_RP2040_CONNECT submodules
make ${MAKEOPTS} -C ports/rp2 BOARD=ARDUINO_NANO_RP2040_CONNECT
}
########################################################################################
# ports/samd
function ci_samd_setup {
ci_gcc_arm_setup
}
function ci_samd_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/samd submodules
make ${MAKEOPTS} -C ports/samd BOARD=ADAFRUIT_ITSYBITSY_M0_EXPRESS
make ${MAKEOPTS} -C ports/samd BOARD=ADAFRUIT_ITSYBITSY_M4_EXPRESS
}
########################################################################################
# ports/stm32
function ci_stm32_setup {
ci_gcc_arm_setup
pip3 install pyelftools
pip3 install pyhy
}
function ci_stm32_pyb_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/stm32 MICROPY_PY_NETWORK_WIZNET5K=5200 submodules
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF2 submodules
git submodule update --init lib/btstack
git submodule update --init lib/mynewt-nimble
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBV11 MICROPY_PY_NETWORK_WIZNET5K=5200 USER_C_MODULES=../../examples/usercmodule
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF2
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF6 NANBOX=1 MICROPY_BLUETOOTH_NIMBLE=0 MICROPY_BLUETOOTH_BTSTACK=1
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=PYBV10 CFLAGS_EXTRA='-DMBOOT_FSLOAD=1 -DMBOOT_VFS_LFS2=1'
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=PYBD_SF6
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=STM32F769DISC CFLAGS_EXTRA='-DMBOOT_ADDRESS_SPACE_64BIT=1 -DMBOOT_SDCARD_ADDR=0x100000000ULL -DMBOOT_SDCARD_BYTE_SIZE=0x400000000ULL -DMBOOT_FSLOAD=1 -DMBOOT_VFS_FAT=1'
# Test building native .mpy with armv7emsp architecture.
git submodule update --init lib/berkeley-db-1.xx
ci_native_mpy_modules_build armv7emsp
}
function ci_stm32_nucleo_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_H743ZI submodules
git submodule update --init lib/mynewt-nimble
# Test building various MCU families, some with additional options.
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_F091RC
make ${MAKEOPTS} -C ports/stm32 BOARD=STM32H573I_DK
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_H743ZI COPT=-O2 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_L073RZ
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_L476RG DEBUG=1
# Test building a board with mboot packing enabled (encryption, signing, compression).
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_WB55 USE_MBOOT=1 MBOOT_ENABLE_PACKING=1
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=NUCLEO_WB55 USE_MBOOT=1 MBOOT_ENABLE_PACKING=1
# Test mboot_pack_dfu.py created a valid file, and that its unpack-dfu command works.
BOARD_WB55=ports/stm32/boards/NUCLEO_WB55
BUILD_WB55=ports/stm32/build-NUCLEO_WB55
python3 ports/stm32/mboot/mboot_pack_dfu.py -k $BOARD_WB55/mboot_keys.h unpack-dfu $BUILD_WB55/firmware.pack.dfu $BUILD_WB55/firmware.unpack.dfu
diff $BUILD_WB55/firmware.unpack.dfu $BUILD_WB55/firmware.dfu
# Test unpack-dfu command works without a secret key
tail -n +2 $BOARD_WB55/mboot_keys.h > $BOARD_WB55/mboot_keys_no_sk.h
python3 ports/stm32/mboot/mboot_pack_dfu.py -k $BOARD_WB55/mboot_keys_no_sk.h unpack-dfu $BUILD_WB55/firmware.pack.dfu $BUILD_WB55/firmware.unpack_no_sk.dfu
diff $BUILD_WB55/firmware.unpack.dfu $BUILD_WB55/firmware.unpack_no_sk.dfu
}
function ci_stm32_misc_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/stm32 BOARD=ARDUINO_GIGA submodules
make ${MAKEOPTS} -C ports/stm32 BOARD=ARDUINO_GIGA
}
########################################################################################
# ports/unix
CI_UNIX_OPTS_SYS_SETTRACE=(
MICROPY_PY_BTREE=0
MICROPY_PY_FFI=0
MICROPY_PY_SSL=0
CFLAGS_EXTRA="-DMICROPY_PY_SYS_SETTRACE=1"
)
CI_UNIX_OPTS_SYS_SETTRACE_STACKLESS=(
MICROPY_PY_BTREE=0
MICROPY_PY_FFI=0
MICROPY_PY_SSL=0
CFLAGS_EXTRA="-DMICROPY_STACKLESS=1 -DMICROPY_STACKLESS_STRICT=1 -DMICROPY_PY_SYS_SETTRACE=1"
)
CI_UNIX_OPTS_QEMU_MIPS=(
CROSS_COMPILE=mips-linux-gnu-
VARIANT=coverage
MICROPY_STANDALONE=1
LDFLAGS_EXTRA="-static"
)
CI_UNIX_OPTS_QEMU_ARM=(
CROSS_COMPILE=arm-linux-gnueabi-
VARIANT=coverage
MICROPY_STANDALONE=1
)
function ci_unix_build_helper {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/unix "$@" submodules
make ${MAKEOPTS} -C ports/unix "$@" deplibs
make ${MAKEOPTS} -C ports/unix "$@"
}
function ci_unix_build_ffi_lib_helper {
$1 $2 -shared -o tests/ports/unix/ffi_lib.so tests/ports/unix/ffi_lib.c
}
function ci_unix_run_tests_helper {
make -C ports/unix "$@" test
}
function ci_unix_run_tests_full_helper {
variant=$1
shift
micropython=../ports/unix/build-$variant/micropython
make -C ports/unix VARIANT=$variant "$@" test_full
(cd tests && MICROPY_CPYTHON3=python3 MICROPY_MICROPYTHON=$micropython ./run-multitests.py multi_net/*.py)
(cd tests && MICROPY_CPYTHON3=python3 MICROPY_MICROPYTHON=$micropython ./run-perfbench.py 1000 1000)
}
function ci_native_mpy_modules_build {
if [ "$1" = "" ]; then
arch=x64
else
arch=$1
fi
make -C examples/natmod/features1 ARCH=$arch
make -C examples/natmod/features2 ARCH=$arch
make -C examples/natmod/features3 ARCH=$arch
make -C examples/natmod/features4 ARCH=$arch
make -C examples/natmod/btree ARCH=$arch
make -C examples/natmod/deflate ARCH=$arch
make -C examples/natmod/framebuf ARCH=$arch
make -C examples/natmod/heapq ARCH=$arch
make -C examples/natmod/random ARCH=$arch
make -C examples/natmod/re ARCH=$arch
}
function ci_native_mpy_modules_32bit_build {
ci_native_mpy_modules_build x86
}
function ci_unix_minimal_build {
make ${MAKEOPTS} -C ports/unix VARIANT=minimal
}
function ci_unix_minimal_run_tests {
(cd tests && MICROPY_CPYTHON3=python3 MICROPY_MICROPYTHON=../ports/unix/build-minimal/micropython ./run-tests.py -e exception_chain -e self_type_check -e subclass_native_init -d basics)
}
function ci_unix_standard_build {
ci_unix_build_helper VARIANT=standard
ci_unix_build_ffi_lib_helper gcc
}
function ci_unix_standard_run_tests {
ci_unix_run_tests_full_helper standard
}
function ci_unix_standard_v2_build {
ci_unix_build_helper VARIANT=standard MICROPY_PREVIEW_VERSION_2=1
ci_unix_build_ffi_lib_helper gcc
}
function ci_unix_standard_v2_run_tests {
ci_unix_run_tests_full_helper standard
}
function ci_unix_coverage_setup {
sudo pip3 install setuptools
sudo pip3 install pyelftools
gcc --version
python3 --version
}
function ci_unix_coverage_build {
ci_unix_build_helper VARIANT=coverage
ci_unix_build_ffi_lib_helper gcc
}
function ci_unix_coverage_run_tests {
ci_unix_run_tests_full_helper coverage
}
function ci_unix_coverage_run_mpy_merge_tests {
mptop=$(pwd)
outdir=$(mktemp -d)
allmpy=()
# Compile a selection of tests to .mpy and execute them, collecting the output.
# None of the tests should SKIP.
for inpy in $mptop/tests/basics/[acdel]*.py; do
test=$(basename $inpy .py)
echo $test
outmpy=$outdir/$test.mpy
$mptop/mpy-cross/build/mpy-cross -o $outmpy $inpy
(cd $outdir && $mptop/ports/unix/build-coverage/micropython -m $test >> out-individual)
allmpy+=($outmpy)
done
# Merge all the tests into one .mpy file, and then execute it.
python3 $mptop/tools/mpy-tool.py --merge -o $outdir/merged.mpy ${allmpy[@]}
(cd $outdir && $mptop/ports/unix/build-coverage/micropython -m merged > out-merged)
# Make sure the outputs match.
diff $outdir/out-individual $outdir/out-merged && /bin/rm -rf $outdir
}
function ci_unix_coverage_run_native_mpy_tests {
MICROPYPATH=examples/natmod/features2 ./ports/unix/build-coverage/micropython -m features2
(cd tests && ./run-natmodtests.py "$@" extmod/{btree*,deflate*,framebuf*,heapq*,random*,re*}.py)
}
function ci_unix_32bit_setup {
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install gcc-multilib g++-multilib libffi-dev:i386
sudo pip3 install setuptools
sudo pip3 install pyelftools
gcc --version
python3 --version
}
function ci_unix_coverage_32bit_build {
ci_unix_build_helper VARIANT=coverage MICROPY_FORCE_32BIT=1
ci_unix_build_ffi_lib_helper gcc -m32
}
function ci_unix_coverage_32bit_run_tests {
ci_unix_run_tests_full_helper coverage MICROPY_FORCE_32BIT=1
}
function ci_unix_coverage_32bit_run_native_mpy_tests {
ci_unix_coverage_run_native_mpy_tests --arch x86
}
function ci_unix_nanbox_build {
# Use Python 2 to check that it can run the build scripts
ci_unix_build_helper PYTHON=python2 VARIANT=nanbox CFLAGS_EXTRA="-DMICROPY_PY_MATH_CONSTANTS=1"
ci_unix_build_ffi_lib_helper gcc -m32
}
function ci_unix_nanbox_run_tests {
ci_unix_run_tests_full_helper nanbox PYTHON=python2
}
function ci_unix_float_build {
ci_unix_build_helper VARIANT=standard CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
ci_unix_build_ffi_lib_helper gcc
}
function ci_unix_float_run_tests {
# TODO get this working: ci_unix_run_tests_full_helper standard CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
ci_unix_run_tests_helper CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
}
function ci_unix_clang_setup {
sudo apt-get install clang
clang --version
}
function ci_unix_stackless_clang_build {
make ${MAKEOPTS} -C mpy-cross CC=clang
make ${MAKEOPTS} -C ports/unix submodules
make ${MAKEOPTS} -C ports/unix CC=clang CFLAGS_EXTRA="-DMICROPY_STACKLESS=1 -DMICROPY_STACKLESS_STRICT=1"
}
function ci_unix_stackless_clang_run_tests {
ci_unix_run_tests_helper CC=clang
}
function ci_unix_float_clang_build {
make ${MAKEOPTS} -C mpy-cross CC=clang
make ${MAKEOPTS} -C ports/unix submodules
make ${MAKEOPTS} -C ports/unix CC=clang CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
}
function ci_unix_float_clang_run_tests {
ci_unix_run_tests_helper CC=clang
}
function ci_unix_settrace_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/unix submodules
make ${MAKEOPTS} -C ports/unix "${CI_UNIX_OPTS_SYS_SETTRACE[@]}"
}
function ci_unix_settrace_run_tests {
ci_unix_run_tests_full_helper standard "${CI_UNIX_OPTS_SYS_SETTRACE[@]}"
}
function ci_unix_settrace_stackless_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/unix submodules
make ${MAKEOPTS} -C ports/unix "${CI_UNIX_OPTS_SYS_SETTRACE_STACKLESS[@]}"
}
function ci_unix_settrace_stackless_run_tests {
ci_unix_run_tests_full_helper standard "${CI_UNIX_OPTS_SYS_SETTRACE_STACKLESS[@]}"
}
function ci_unix_macos_build {
# Install pkg-config to configure libffi paths.
brew install pkg-config
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/unix submodules
#make ${MAKEOPTS} -C ports/unix deplibs
make ${MAKEOPTS} -C ports/unix
# check for additional compiler errors/warnings
make ${MAKEOPTS} -C ports/unix VARIANT=coverage submodules
make ${MAKEOPTS} -C ports/unix VARIANT=coverage
}
function ci_unix_macos_run_tests {
# Issues with macOS tests:
# - import_pkg7 has a problem with relative imports
# - random_basic has a problem with getrandbits(0)
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-standard/micropython ./run-tests.py --exclude 'import_pkg7.py' --exclude 'random_basic.py')
}
function ci_unix_qemu_mips_setup {
sudo apt-get update
sudo apt-get install gcc-mips-linux-gnu g++-mips-linux-gnu
sudo apt-get install qemu-user
qemu-mips --version
}
function ci_unix_qemu_mips_build {
# qemu-mips on GitHub Actions will seg-fault if not linked statically
ci_unix_build_helper "${CI_UNIX_OPTS_QEMU_MIPS[@]}"
}
function ci_unix_qemu_mips_run_tests {
# Issues with MIPS tests:
# - (i)listdir does not work, it always returns the empty list (it's an issue with the underlying C call)
# - ffi tests do not work
file ./ports/unix/build-coverage/micropython
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-coverage/micropython ./run-tests.py --exclude 'vfs_posix.*\.py' --exclude 'ffi_(callback|float|float2).py')
}
function ci_unix_qemu_arm_setup {
sudo apt-get update
sudo apt-get install gcc-arm-linux-gnueabi g++-arm-linux-gnueabi
sudo apt-get install qemu-user
qemu-arm --version
}
function ci_unix_qemu_arm_build {
ci_unix_build_helper "${CI_UNIX_OPTS_QEMU_ARM[@]}"
ci_unix_build_ffi_lib_helper arm-linux-gnueabi-gcc
}
function ci_unix_qemu_arm_run_tests {
# Issues with ARM tests:
# - (i)listdir does not work, it always returns the empty list (it's an issue with the underlying C call)
export QEMU_LD_PREFIX=/usr/arm-linux-gnueabi
file ./ports/unix/build-coverage/micropython
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-coverage/micropython ./run-tests.py --exclude 'vfs_posix.*\.py')
}
########################################################################################
# ports/windows
function ci_windows_setup {
sudo apt-get install gcc-mingw-w64
}
function ci_windows_build {
make ${MAKEOPTS} -C mpy-cross
make ${MAKEOPTS} -C ports/windows submodules
make ${MAKEOPTS} -C ports/windows CROSS_COMPILE=i686-w64-mingw32-
}
########################################################################################
# ports/zephyr
ZEPHYR_DOCKER_VERSION=v0.21.0
ZEPHYR_SDK_VERSION=0.13.2
ZEPHYR_VERSION=v3.1.0
function ci_zephyr_setup {
docker pull zephyrprojectrtos/ci:${ZEPHYR_DOCKER_VERSION}
docker run --name zephyr-ci -d -it \
-v "$(pwd)":/micropython \
-e ZEPHYR_SDK_INSTALL_DIR=/opt/toolchains/zephyr-sdk-${ZEPHYR_SDK_VERSION} \
-e ZEPHYR_TOOLCHAIN_VARIANT=zephyr \
-e ZEPHYR_BASE=/zephyrproject/zephyr \
-w /micropython/ports/zephyr \
zephyrprojectrtos/ci:${ZEPHYR_DOCKER_VERSION}
docker ps -a
}
function ci_zephyr_install {
docker exec zephyr-ci west init --mr ${ZEPHYR_VERSION} /zephyrproject
docker exec -w /zephyrproject zephyr-ci west update
docker exec -w /zephyrproject zephyr-ci west zephyr-export
}
function ci_zephyr_build {
docker exec zephyr-ci west build -p auto -b qemu_x86 -- -DCONF_FILE=prj_minimal.conf
docker exec zephyr-ci west build -p auto -b frdm_k64f
docker exec zephyr-ci west build -p auto -b mimxrt1050_evk
docker exec zephyr-ci west build -p auto -b nucleo_wb55rg # for bluetooth
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik