micropython/ports/mimxrt
iabdalkader 5a7d78c732 mimxrt,stm32: Set the security mode for the default WiFi AP.
The default CYW43 WiFi AP settings were missing the security mode, leaving
the AP in open mode by default.  That's changed by this commit to use
WPA/WPA2 by default.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-28 12:51:50 +11:00
..
boards all: Prune trailing whitespace. 2024-03-07 16:25:17 +11:00
hal mimxrt/hal: Make flash clock frequency configurable. 2023-08-15 23:45:22 +10:00
lwip_inc mimxrt: Re-Enable eth checksum creation by HW. 2021-12-14 08:07:52 +01:00
mbedtls all: Update bindings, ports and tests for mbedtls v3.5.1. 2024-01-30 11:08:46 +11:00
modules ports: Use vfs module instead of os. 2024-02-07 13:25:09 +11:00
Makefile ports: Fix handling of paths containing spaces in Makefiles. 2024-01-24 10:43:18 +11:00
README.md mimxrt/README: Add build and flashing instructions. 2022-11-17 14:21:59 +11:00
board_init.c mimxrt/irq: Move all IRQ related definitions to dedicated header. 2023-09-01 00:02:19 +10:00
cyw43_configport.h mimxrt: Fix header include guard names. 2024-02-15 09:45:14 +11:00
dma_manager.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
dma_manager.h mixmrt/machine_i2s: Add I2S protocol support. 2022-03-30 14:12:40 +11:00
eth.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
eth.h mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. 2022-11-17 14:11:50 +11:00
fatfs_port.c mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
flash.c mimxrt/flash: Separate low level driver code from flash object. 2023-05-09 15:18:36 +10:00
flash.h mimxrt/flash: Separate low level driver code from flash object. 2023-05-09 15:18:36 +10:00
help.c ports: Standardise docs link in help text. 2023-06-02 11:48:46 +10:00
irq.h mimxrt/irq: Move all IRQ related definitions to dedicated header. 2023-09-01 00:02:19 +10:00
led.c mimxrt/boards/make-pins.py: Update to use tools/boardgen.py. 2023-11-03 14:18:54 +11:00
led.h mimxrt/led: Add support for up to four LEDs. 2023-05-23 10:54:23 +10:00
machine_adc.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_bitstream.c mimxrt: Fix cycle counter for time.ticks_cpu() and machine.bitstream(). 2021-10-25 15:50:44 +11:00
machine_i2c.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_i2s.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_led.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_pin.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_pwm.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_rtc.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_sdcard.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_spi.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_uart.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
machine_wdt.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
main.c mimxrt,stm32: Set the security mode for the default WiFi AP. 2024-03-28 12:51:50 +11:00
mimxrt_flash.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
mimxrt_sdram.c mimxrt/mimxrt_sdram: Allow boards to override the default SDRAM config. 2023-09-29 23:08:48 +10:00
modmachine.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
modmachine.h extmod/modmachine: Clean up decls of machine types to use common ones. 2023-10-26 16:20:53 +11:00
modmimxrt.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
modmimxrt.h mimxrt: Add flash storage support with VFS and littlefs filesystem. 2021-06-01 23:42:57 +10:00
modos.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
modtime.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
mpbthciport.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
mpbthciport.h mimxrt: Integrate Bluetooth support with NimBLE bindings. 2023-08-31 23:42:10 +10:00
mpconfigport.h mimxrt: Define the MICROPY_HW_ENABLE_USBDEV macro. 2024-03-15 13:37:42 +11:00
mphalport.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
mphalport.h ports: Move MICROPY_PY_LWIP_ENTER/REENTER/EXIT defns to mphalport.h. 2024-01-05 15:40:06 +11:00
mpnetworkport.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
mpnimbleport.c mimxrt: Integrate Bluetooth support with NimBLE bindings. 2023-08-31 23:42:10 +10:00
mpnimbleport.h mimxrt: Integrate Bluetooth support with NimBLE bindings. 2023-08-31 23:42:10 +10:00
network_lan.c all: Remove the "STATIC" macro and just use "static" instead. 2024-03-07 14:20:42 +11:00
pendsv.c mimxrt/irq: Move all IRQ related definitions to dedicated header. 2023-09-01 00:02:19 +10:00
pendsv.h mimxrt: Fix header include guard names. 2024-02-15 09:45:14 +11:00
pin.c mimxrt/boards/make-pins.py: Update to use tools/boardgen.py. 2023-11-03 14:18:54 +11:00
pin.h mimxrt/boards/make-pins.py: Update to use tools/boardgen.py. 2023-11-03 14:18:54 +11:00
qstrdefsport.h mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. 2020-03-11 15:34:13 +11:00
sdcard.c mimxrt: Remove SDCARD Makefile config option. 2023-09-29 23:09:14 +10:00
sdcard.h mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
sdio.c mimxrt/sdio: Add support for the 117x series. 2023-09-29 23:08:41 +10:00
sdio.h mimxrt/sdio: Add SDIO driver. 2023-08-31 23:39:34 +10:00
systick.c mimxrt/machine_timer: Use soft-timer implementation for machine.Timer. 2022-10-27 14:09:29 +11:00
systick.h mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
ticks.c mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. 2022-11-17 14:11:50 +11:00
ticks.h mimxrt: Improve ticks and sleep functions using GPT. 2021-05-18 22:36:32 +10:00
tusb_config.h ports: Update to build with new tinyusb. 2021-02-12 12:50:36 +11:00
tusb_port.c mimxrt/usb: Change macro name MICROPY_HW_USB_STR_MANUF. 2022-11-17 08:27:33 +01:00

README.md

Port of MicroPython to NXP iMX RT 10xx

Currently supports Teensy 4.0, Teensy 4.1, and the MIMXRT1010_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK, MIMXRT1060_EVK and MIMXRT1064_EVK boards.

Features:

  • REPL over USB VCP
  • machine.ADC
  • machine.I2C
  • machine.LED
  • machine.Pin
  • machine.PWM
  • machine.RTC
  • machine.SDCard
  • machine.SPI
  • machine.Signal
  • machine.SoftI2C
  • machine.SoftSPI
  • machine.Timer
  • machine.UART
  • LFS2 file system at the internal Flash
  • SDCard support (not on MIMXRT1010_EVK)
  • Ethernet (not on Teensy 4.0 and MIMXRT1010_EVK)

Known issues:

TODO:

  • More peripherals (Counter, I2S, CAN, etc)
  • More Python options

Build Instructions

Before building the firmware for a given board the MicroPython cross-compiler must be built; it will be used to pre-compile some of the built-in scripts to bytecode. The cross-compiler is built and run on the host machine, using:

$ make -C mpy-cross

This command should be executed from the root directory of this repository. All other commands below should be executed from the ports/mimxrt/ directory.

An ARM compiler is required for the build, along with the associated binary utilities. The default compiler is arm-none-eabi-gcc, which is available for Arch Linux via the package arm-none-eabi-gcc, for Ubuntu via instructions here, or see here for the main GCC ARM Embedded page. The compiler can be changed using the CROSS_COMPILE variable when invoking make.

In addition newlib is required which is available for Arch Linux via the package arm-none-eabi-newlib, for Ubuntu/Debian install package libnewlib-arm-none-eabi

Next, the board to build must be selected. Any of the board names of the subdirectories in the boards/ directory is a valid board. The board name must be passed as the argument to BOARD= when invoking make.

All boards require certain submodules to be obtained before they can be built. The correct set of submodules can be initialised using (with SEEED_ARCH_MIX as an example of the selected board):

$ make BOARD=SEEED_ARCH_MIX submodules

Then to build the board's firmware run:

$ make BOARD=SEEED_ARCH_MIX

The above command should produce binary images in the build-SEEED_ARCH_MIX/ subdirectory (or the equivalent directory for the board specified).

Flashing

Deploy the firmware following the instructions here https://docs.micropython.org/en/latest/mimxrt/tutorial/intro.html#deploying-the-firmware