/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2013, 2014 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include #include "py/runtime.h" #include "py/binary.h" #include "py/mphal.h" #include "adc.h" #include "pin.h" #include "timer.h" #if MICROPY_HW_ENABLE_ADC /// \moduleref pyb /// \class ADC - analog to digital conversion: read analog values on a pin /// /// Usage: /// /// adc = pyb.ADC(pin) # create an analog object from a pin /// val = adc.read() # read an analog value /// /// adc = pyb.ADCAll(resolution) # creale an ADCAll object /// val = adc.read_channel(channel) # read the given channel /// val = adc.read_core_temp() # read MCU temperature /// val = adc.read_core_vbat() # read MCU VBAT /// val = adc.read_core_vref() # read MCU VREF /* ADC defintions */ #if defined(STM32H7) #define ADCx (ADC3) #define PIN_ADC_MASK PIN_ADC3 #define pin_adc_table pin_adc3 #else #define ADCx (ADC1) #define PIN_ADC_MASK PIN_ADC1 #define pin_adc_table pin_adc1 #endif #define ADCx_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE #if defined(STM32F0) #define ADC_FIRST_GPIO_CHANNEL (0) #define ADC_LAST_GPIO_CHANNEL (15) #define ADC_SCALE_V (3.3f) #define ADC_CAL_ADDRESS (0x1ffff7ba) #define ADC_CAL1 ((uint16_t *)0x1ffff7b8) #define ADC_CAL2 ((uint16_t *)0x1ffff7c2) #define ADC_CAL_BITS (12) #elif defined(STM32F4) #define ADC_FIRST_GPIO_CHANNEL (0) #define ADC_LAST_GPIO_CHANNEL (15) #define ADC_SCALE_V (3.3f) #define ADC_CAL_ADDRESS (0x1fff7a2a) #define ADC_CAL1 ((uint16_t *)(ADC_CAL_ADDRESS + 2)) #define ADC_CAL2 ((uint16_t *)(ADC_CAL_ADDRESS + 4)) #define ADC_CAL_BITS (12) #elif defined(STM32F7) #define ADC_FIRST_GPIO_CHANNEL (0) #define ADC_LAST_GPIO_CHANNEL (15) #define ADC_SCALE_V (3.3f) #if defined(STM32F722xx) || defined(STM32F723xx) || \ defined(STM32F732xx) || defined(STM32F733xx) #define ADC_CAL_ADDRESS (0x1ff07a2a) #else #define ADC_CAL_ADDRESS (0x1ff0f44a) #endif #define ADC_CAL1 ((uint16_t *)(ADC_CAL_ADDRESS + 2)) #define ADC_CAL2 ((uint16_t *)(ADC_CAL_ADDRESS + 4)) #define ADC_CAL_BITS (12) #elif defined(STM32H7) #define ADC_FIRST_GPIO_CHANNEL (0) #define ADC_LAST_GPIO_CHANNEL (16) #define ADC_SCALE_V (3.3f) #define ADC_CAL_ADDRESS (0x1FF1E860) #define ADC_CAL1 ((uint16_t *)(0x1FF1E820)) #define ADC_CAL2 ((uint16_t *)(0x1FF1E840)) #define ADC_CAL_BITS (16) #elif defined(STM32L4) #define ADC_FIRST_GPIO_CHANNEL (1) #define ADC_LAST_GPIO_CHANNEL (16) #define ADC_SCALE_V (3.0f) #define ADC_CAL_ADDRESS (0x1fff75aa) #define ADC_CAL1 ((uint16_t *)(ADC_CAL_ADDRESS - 2)) #define ADC_CAL2 ((uint16_t *)(ADC_CAL_ADDRESS + 0x20)) #define ADC_CAL_BITS (12) #else #error Unsupported processor #endif #if defined(STM32F091xC) #define VBAT_DIV (2) #elif defined(STM32F405xx) || defined(STM32F415xx) || \ defined(STM32F407xx) || defined(STM32F417xx) || \ defined(STM32F401xC) || defined(STM32F401xE) #define VBAT_DIV (2) #elif defined(STM32F411xE) || defined(STM32F413xx) || \ defined(STM32F427xx) || defined(STM32F429xx) || \ defined(STM32F437xx) || defined(STM32F439xx) || \ defined(STM32F446xx) #define VBAT_DIV (4) #elif defined(STM32F722xx) || defined(STM32F723xx) || \ defined(STM32F732xx) || defined(STM32F733xx) || \ defined(STM32F746xx) || defined(STM32F765xx) || \ defined(STM32F767xx) || defined(STM32F769xx) #define VBAT_DIV (4) #elif defined(STM32H743xx) #define VBAT_DIV (4) #elif defined(STM32L432xx) || \ defined(STM32L451xx) || defined(STM32L452xx) || \ defined(STM32L462xx) || defined(STM32L475xx) || \ defined(STM32L476xx) || defined(STM32L496xx) #define VBAT_DIV (3) #else #error Unsupported processor #endif // Timeout for waiting for end-of-conversion, in ms #define EOC_TIMEOUT (10) /* Core temperature sensor definitions */ #define CORE_TEMP_V25 (943) /* (0.76v/3.3v)*(2^ADC resoultion) */ #define CORE_TEMP_AVG_SLOPE (3) /* (2.5mv/3.3v)*(2^ADC resoultion) */ // scale and calibration values for VBAT and VREF #define ADC_SCALE (ADC_SCALE_V / ((1 << ADC_CAL_BITS) - 1)) #define VREFIN_CAL ((uint16_t *)ADC_CAL_ADDRESS) #ifndef __HAL_ADC_IS_CHANNEL_INTERNAL #define __HAL_ADC_IS_CHANNEL_INTERNAL(channel) \ (channel == ADC_CHANNEL_VBAT \ || channel == ADC_CHANNEL_VREFINT \ || channel == ADC_CHANNEL_TEMPSENSOR) #endif typedef struct _pyb_obj_adc_t { mp_obj_base_t base; mp_obj_t pin_name; int channel; ADC_HandleTypeDef handle; } pyb_obj_adc_t; // convert user-facing channel number into internal channel number static inline uint32_t adc_get_internal_channel(uint32_t channel) { #if defined(STM32F4) || defined(STM32F7) // on F4 and F7 MCUs we want channel 16 to always be the TEMPSENSOR // (on some MCUs ADC_CHANNEL_TEMPSENSOR=16, on others it doesn't) if (channel == 16) { channel = ADC_CHANNEL_TEMPSENSOR; } #endif return channel; } STATIC bool is_adcx_channel(int channel) { #if defined(STM32F411xE) // The HAL has an incorrect IS_ADC_CHANNEL macro for the F411 so we check for temp return IS_ADC_CHANNEL(channel) || channel == ADC_CHANNEL_TEMPSENSOR; #elif defined(STM32F0) || defined(STM32F4) || defined(STM32F7) return IS_ADC_CHANNEL(channel); #elif defined(STM32H7) return __HAL_ADC_IS_CHANNEL_INTERNAL(channel) || IS_ADC_CHANNEL(__HAL_ADC_DECIMAL_NB_TO_CHANNEL(channel)); #elif defined(STM32L4) ADC_HandleTypeDef handle; handle.Instance = ADCx; return IS_ADC_CHANNEL(&handle, channel); #else #error Unsupported processor #endif } STATIC void adc_wait_for_eoc_or_timeout(int32_t timeout) { uint32_t tickstart = HAL_GetTick(); #if defined(STM32F4) || defined(STM32F7) while ((ADCx->SR & ADC_FLAG_EOC) != ADC_FLAG_EOC) { #elif defined(STM32F0) || defined(STM32H7) || defined(STM32L4) while (READ_BIT(ADCx->ISR, ADC_FLAG_EOC) != ADC_FLAG_EOC) { #else #error Unsupported processor #endif if (((HAL_GetTick() - tickstart) > timeout)) { break; // timeout } } } STATIC void adcx_clock_enable(void) { #if defined(STM32F0) || defined(STM32F4) || defined(STM32F7) ADCx_CLK_ENABLE(); #elif defined(STM32H7) __HAL_RCC_ADC3_CLK_ENABLE(); __HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_CLKP); #elif defined(STM32L4) __HAL_RCC_ADC_CLK_ENABLE(); #else #error Unsupported processor #endif } STATIC void adcx_init_periph(ADC_HandleTypeDef *adch, uint32_t resolution) { adcx_clock_enable(); adch->Instance = ADCx; adch->Init.Resolution = resolution; adch->Init.ContinuousConvMode = DISABLE; adch->Init.DiscontinuousConvMode = DISABLE; #if !defined(STM32F0) adch->Init.NbrOfDiscConversion = 0; adch->Init.NbrOfConversion = 1; #endif adch->Init.EOCSelection = ADC_EOC_SINGLE_CONV; adch->Init.ExternalTrigConv = ADC_SOFTWARE_START; adch->Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; #if defined(STM32F0) adch->Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4; // 12MHz adch->Init.ScanConvMode = DISABLE; adch->Init.DataAlign = ADC_DATAALIGN_RIGHT; adch->Init.DMAContinuousRequests = DISABLE; adch->Init.SamplingTimeCommon = ADC_SAMPLETIME_55CYCLES_5; // ~4uS #elif defined(STM32F4) || defined(STM32F7) adch->Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2; adch->Init.ScanConvMode = DISABLE; adch->Init.DataAlign = ADC_DATAALIGN_RIGHT; adch->Init.DMAContinuousRequests = DISABLE; #elif defined(STM32H7) adch->Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4; adch->Init.ScanConvMode = DISABLE; adch->Init.LowPowerAutoWait = DISABLE; adch->Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; adch->Init.OversamplingMode = DISABLE; adch->Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE; adch->Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR; #elif defined(STM32L4) adch->Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; adch->Init.ScanConvMode = ADC_SCAN_DISABLE; adch->Init.LowPowerAutoWait = DISABLE; adch->Init.Overrun = ADC_OVR_DATA_PRESERVED; adch->Init.OversamplingMode = DISABLE; adch->Init.DataAlign = ADC_DATAALIGN_RIGHT; adch->Init.DMAContinuousRequests = DISABLE; #else #error Unsupported processor #endif HAL_ADC_Init(adch); #if defined(STM32H7) HAL_ADCEx_Calibration_Start(adch, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED); #endif #if defined(STM32L4) HAL_ADCEx_Calibration_Start(adch, ADC_SINGLE_ENDED); #endif } STATIC void adc_init_single(pyb_obj_adc_t *adc_obj) { if (ADC_FIRST_GPIO_CHANNEL <= adc_obj->channel && adc_obj->channel <= ADC_LAST_GPIO_CHANNEL) { // Channels 0-16 correspond to real pins. Configure the GPIO pin in ADC mode. const pin_obj_t *pin = pin_adc_table[adc_obj->channel]; mp_hal_pin_config(pin, MP_HAL_PIN_MODE_ADC, MP_HAL_PIN_PULL_NONE, 0); } adcx_init_periph(&adc_obj->handle, ADC_RESOLUTION_12B); #if defined(STM32L4) && defined(ADC_DUALMODE_REGSIMULT_INJECSIMULT) ADC_MultiModeTypeDef multimode; multimode.Mode = ADC_MODE_INDEPENDENT; if (HAL_ADCEx_MultiModeConfigChannel(&adc_obj->handle, &multimode) != HAL_OK) { mp_raise_msg_varg(&mp_type_ValueError, "Can not set multimode on ADC1 channel: %d", adc_obj->channel); } #endif } STATIC void adc_config_channel(ADC_HandleTypeDef *adc_handle, uint32_t channel) { ADC_ChannelConfTypeDef sConfig; #if defined(STM32H7) sConfig.Rank = ADC_REGULAR_RANK_1; if (__HAL_ADC_IS_CHANNEL_INTERNAL(channel) == 0) { channel = __HAL_ADC_DECIMAL_NB_TO_CHANNEL(channel); } #else sConfig.Rank = 1; #endif sConfig.Channel = channel; #if defined(STM32F0) sConfig.SamplingTime = ADC_SAMPLETIME_55CYCLES_5; #elif defined(STM32F4) || defined(STM32F7) sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES; #elif defined(STM32H7) if (__HAL_ADC_IS_CHANNEL_INTERNAL(channel)) { sConfig.SamplingTime = ADC_SAMPLETIME_810CYCLES_5; } else { sConfig.SamplingTime = ADC_SAMPLETIME_8CYCLES_5; } sConfig.SingleDiff = ADC_SINGLE_ENDED; sConfig.OffsetNumber = ADC_OFFSET_NONE; sConfig.OffsetRightShift = DISABLE; sConfig.OffsetSignedSaturation = DISABLE; #elif defined(STM32L4) if (__HAL_ADC_IS_CHANNEL_INTERNAL(channel)) { sConfig.SamplingTime = ADC_SAMPLETIME_247CYCLES_5; } else { sConfig.SamplingTime = ADC_SAMPLETIME_12CYCLES_5; } sConfig.SingleDiff = ADC_SINGLE_ENDED; sConfig.OffsetNumber = ADC_OFFSET_NONE; sConfig.Offset = 0; #else #error Unsupported processor #endif #if defined(STM32F0) // On the STM32F0 we must select only one channel at a time to sample, so clear all // channels before calling HAL_ADC_ConfigChannel, which will select the desired one. adc_handle->Instance->CHSELR = 0; #endif HAL_ADC_ConfigChannel(adc_handle, &sConfig); } STATIC uint32_t adc_read_channel(ADC_HandleTypeDef *adcHandle) { HAL_ADC_Start(adcHandle); adc_wait_for_eoc_or_timeout(EOC_TIMEOUT); uint32_t value = ADCx->DR; HAL_ADC_Stop(adcHandle); return value; } STATIC uint32_t adc_config_and_read_channel(ADC_HandleTypeDef *adcHandle, uint32_t channel) { adc_config_channel(adcHandle, channel); uint32_t raw_value = adc_read_channel(adcHandle); #if defined(STM32F4) || defined(STM32F7) // ST docs say that (at least on STM32F42x and STM32F43x), VBATE must // be disabled when TSVREFE is enabled for TEMPSENSOR and VREFINT // conversions to work. VBATE is enabled by the above call to read // the channel, and here we disable VBATE so a subsequent call for // TEMPSENSOR or VREFINT works correctly. if (channel == ADC_CHANNEL_VBAT) { ADC->CCR &= ~ADC_CCR_VBATE; } #endif return raw_value; } /******************************************************************************/ /* MicroPython bindings : adc object (single channel) */ STATIC void adc_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) { pyb_obj_adc_t *self = MP_OBJ_TO_PTR(self_in); mp_print_str(print, "pin_name, PRINT_STR); mp_printf(print, " channel=%u>", self->channel); } /// \classmethod \constructor(pin) /// Create an ADC object associated with the given pin. /// This allows you to then read analog values on that pin. STATIC mp_obj_t adc_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) { // check number of arguments mp_arg_check_num(n_args, n_kw, 1, 1, false); // 1st argument is the pin name mp_obj_t pin_obj = args[0]; uint32_t channel; if (mp_obj_is_int(pin_obj)) { channel = adc_get_internal_channel(mp_obj_get_int(pin_obj)); } else { const pin_obj_t *pin = pin_find(pin_obj); if ((pin->adc_num & PIN_ADC_MASK) == 0) { // No ADC1 function on that pin mp_raise_msg_varg(&mp_type_ValueError, "pin %q does not have ADC capabilities", pin->name); } channel = pin->adc_channel; } if (!is_adcx_channel(channel)) { mp_raise_msg_varg(&mp_type_ValueError, "not a valid ADC Channel: %d", channel); } if (ADC_FIRST_GPIO_CHANNEL <= channel && channel <= ADC_LAST_GPIO_CHANNEL) { // these channels correspond to physical GPIO ports so make sure they exist if (pin_adc_table[channel] == NULL) { mp_raise_msg_varg(&mp_type_ValueError, "channel %d not available on this board", channel); } } pyb_obj_adc_t *o = m_new_obj(pyb_obj_adc_t); memset(o, 0, sizeof(*o)); o->base.type = &pyb_adc_type; o->pin_name = pin_obj; o->channel = channel; adc_init_single(o); return MP_OBJ_FROM_PTR(o); } /// \method read() /// Read the value on the analog pin and return it. The returned value /// will be between 0 and 4095. STATIC mp_obj_t adc_read(mp_obj_t self_in) { pyb_obj_adc_t *self = MP_OBJ_TO_PTR(self_in); return mp_obj_new_int(adc_config_and_read_channel(&self->handle, self->channel)); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_read_obj, adc_read); /// \method read_timed(buf, timer) /// /// Read analog values into `buf` at a rate set by the `timer` object. /// /// `buf` can be bytearray or array.array for example. The ADC values have /// 12-bit resolution and are stored directly into `buf` if its element size is /// 16 bits or greater. If `buf` has only 8-bit elements (eg a bytearray) then /// the sample resolution will be reduced to 8 bits. /// /// `timer` should be a Timer object, and a sample is read each time the timer /// triggers. The timer must already be initialised and running at the desired /// sampling frequency. /// /// To support previous behaviour of this function, `timer` can also be an /// integer which specifies the frequency (in Hz) to sample at. In this case /// Timer(6) will be automatically configured to run at the given frequency. /// /// Example using a Timer object (preferred way): /// /// adc = pyb.ADC(pyb.Pin.board.X19) # create an ADC on pin X19 /// tim = pyb.Timer(6, freq=10) # create a timer running at 10Hz /// buf = bytearray(100) # creat a buffer to store the samples /// adc.read_timed(buf, tim) # sample 100 values, taking 10s /// /// Example using an integer for the frequency: /// /// adc = pyb.ADC(pyb.Pin.board.X19) # create an ADC on pin X19 /// buf = bytearray(100) # create a buffer of 100 bytes /// adc.read_timed(buf, 10) # read analog values into buf at 10Hz /// # this will take 10 seconds to finish /// for val in buf: # loop over all values /// print(val) # print the value out /// /// This function does not allocate any memory. STATIC mp_obj_t adc_read_timed(mp_obj_t self_in, mp_obj_t buf_in, mp_obj_t freq_in) { pyb_obj_adc_t *self = MP_OBJ_TO_PTR(self_in); mp_buffer_info_t bufinfo; mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_WRITE); size_t typesize = mp_binary_get_size('@', bufinfo.typecode, NULL); TIM_HandleTypeDef *tim; #if defined(TIM6) if (mp_obj_is_integer(freq_in)) { // freq in Hz given so init TIM6 (legacy behaviour) tim = timer_tim6_init(mp_obj_get_int(freq_in)); HAL_TIM_Base_Start(tim); } else #endif { // use the supplied timer object as the sampling time base tim = pyb_timer_get_handle(freq_in); } // configure the ADC channel adc_config_channel(&self->handle, self->channel); // This uses the timer in polling mode to do the sampling // TODO use DMA uint nelems = bufinfo.len / typesize; for (uint index = 0; index < nelems; index++) { // Wait for the timer to trigger so we sample at the correct frequency while (__HAL_TIM_GET_FLAG(tim, TIM_FLAG_UPDATE) == RESET) { } __HAL_TIM_CLEAR_FLAG(tim, TIM_FLAG_UPDATE); if (index == 0) { // for the first sample we need to turn the ADC on HAL_ADC_Start(&self->handle); } else { // for subsequent samples we can just set the "start sample" bit #if defined(STM32F4) || defined(STM32F7) ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART; #elif defined(STM32F0) || defined(STM32H7) || defined(STM32L4) SET_BIT(ADCx->CR, ADC_CR_ADSTART); #else #error Unsupported processor #endif } // wait for sample to complete adc_wait_for_eoc_or_timeout(EOC_TIMEOUT); // read value uint value = ADCx->DR; // store value in buffer if (typesize == 1) { value >>= 4; } mp_binary_set_val_array_from_int(bufinfo.typecode, bufinfo.buf, index, value); } // turn the ADC off HAL_ADC_Stop(&self->handle); #if defined(TIM6) if (mp_obj_is_integer(freq_in)) { // stop timer if we initialised TIM6 in this function (legacy behaviour) HAL_TIM_Base_Stop(tim); } #endif return mp_obj_new_int(bufinfo.len); } STATIC MP_DEFINE_CONST_FUN_OBJ_3(adc_read_timed_obj, adc_read_timed); // read_timed_multi((adcx, adcy, ...), (bufx, bufy, ...), timer) // // Read analog values from multiple ADC's into buffers at a rate set by the // timer. The ADC values have 12-bit resolution and are stored directly into // the corresponding buffer if its element size is 16 bits or greater, otherwise // the sample resolution will be reduced to 8 bits. // // This function should not allocate any heap memory. STATIC mp_obj_t adc_read_timed_multi(mp_obj_t adc_array_in, mp_obj_t buf_array_in, mp_obj_t tim_in) { size_t nadcs, nbufs; mp_obj_t *adc_array, *buf_array; mp_obj_get_array(adc_array_in, &nadcs, &adc_array); mp_obj_get_array(buf_array_in, &nbufs, &buf_array); if (nadcs < 1) { mp_raise_ValueError("need at least 1 ADC"); } if (nadcs != nbufs) { mp_raise_ValueError("length of ADC and buffer lists differ"); } // Get buf for first ADC, get word size, check other buffers match in type mp_buffer_info_t bufinfo; mp_get_buffer_raise(buf_array[0], &bufinfo, MP_BUFFER_WRITE); size_t typesize = mp_binary_get_size('@', bufinfo.typecode, NULL); void *bufptrs[nbufs]; for (uint array_index = 0; array_index < nbufs; array_index++) { mp_buffer_info_t bufinfo_curr; mp_get_buffer_raise(buf_array[array_index], &bufinfo_curr, MP_BUFFER_WRITE); if ((bufinfo.len != bufinfo_curr.len) || (bufinfo.typecode != bufinfo_curr.typecode)) { mp_raise_ValueError("size and type of buffers must match"); } bufptrs[array_index] = bufinfo_curr.buf; } // Use the supplied timer object as the sampling time base TIM_HandleTypeDef *tim; tim = pyb_timer_get_handle(tim_in); // Start adc; this is slow so wait for it to start pyb_obj_adc_t *adc0 = MP_OBJ_TO_PTR(adc_array[0]); adc_config_channel(&adc0->handle, adc0->channel); HAL_ADC_Start(&adc0->handle); // Wait for sample to complete and discard adc_wait_for_eoc_or_timeout(EOC_TIMEOUT); // Read (and discard) value uint value = ADCx->DR; // Ensure first sample is on a timer tick __HAL_TIM_CLEAR_FLAG(tim, TIM_FLAG_UPDATE); while (__HAL_TIM_GET_FLAG(tim, TIM_FLAG_UPDATE) == RESET) { } __HAL_TIM_CLEAR_FLAG(tim, TIM_FLAG_UPDATE); // Overrun check: assume success bool success = true; size_t nelems = bufinfo.len / typesize; for (size_t elem_index = 0; elem_index < nelems; elem_index++) { if (__HAL_TIM_GET_FLAG(tim, TIM_FLAG_UPDATE) != RESET) { // Timer has already triggered success = false; } else { // Wait for the timer to trigger so we sample at the correct frequency while (__HAL_TIM_GET_FLAG(tim, TIM_FLAG_UPDATE) == RESET) { } } __HAL_TIM_CLEAR_FLAG(tim, TIM_FLAG_UPDATE); for (size_t array_index = 0; array_index < nadcs; array_index++) { pyb_obj_adc_t *adc = MP_OBJ_TO_PTR(adc_array[array_index]); // configure the ADC channel adc_config_channel(&adc->handle, adc->channel); // for the first sample we need to turn the ADC on // ADC is started: set the "start sample" bit #if defined(STM32F4) || defined(STM32F7) ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART; #elif defined(STM32F0) || defined(STM32H7) || defined(STM32L4) SET_BIT(ADCx->CR, ADC_CR_ADSTART); #else #error Unsupported processor #endif // wait for sample to complete adc_wait_for_eoc_or_timeout(EOC_TIMEOUT); // read value value = ADCx->DR; // store values in buffer if (typesize == 1) { value >>= 4; } mp_binary_set_val_array_from_int(bufinfo.typecode, bufptrs[array_index], elem_index, value); } } // Turn the ADC off adc0 = MP_OBJ_TO_PTR(adc_array[0]); HAL_ADC_Stop(&adc0->handle); return mp_obj_new_bool(success); } STATIC MP_DEFINE_CONST_FUN_OBJ_3(adc_read_timed_multi_fun_obj, adc_read_timed_multi); STATIC MP_DEFINE_CONST_STATICMETHOD_OBJ(adc_read_timed_multi_obj, MP_ROM_PTR(&adc_read_timed_multi_fun_obj)); STATIC const mp_rom_map_elem_t adc_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_read), MP_ROM_PTR(&adc_read_obj) }, { MP_ROM_QSTR(MP_QSTR_read_timed), MP_ROM_PTR(&adc_read_timed_obj) }, { MP_ROM_QSTR(MP_QSTR_read_timed_multi), MP_ROM_PTR(&adc_read_timed_multi_obj) }, }; STATIC MP_DEFINE_CONST_DICT(adc_locals_dict, adc_locals_dict_table); const mp_obj_type_t pyb_adc_type = { { &mp_type_type }, .name = MP_QSTR_ADC, .print = adc_print, .make_new = adc_make_new, .locals_dict = (mp_obj_dict_t *)&adc_locals_dict, }; /******************************************************************************/ /* adc all object */ typedef struct _pyb_adc_all_obj_t { mp_obj_base_t base; ADC_HandleTypeDef handle; } pyb_adc_all_obj_t; void adc_init_all(pyb_adc_all_obj_t *adc_all, uint32_t resolution, uint32_t en_mask) { switch (resolution) { #if !defined(STM32H7) case 6: resolution = ADC_RESOLUTION_6B; break; #endif case 8: resolution = ADC_RESOLUTION_8B; break; case 10: resolution = ADC_RESOLUTION_10B; break; case 12: resolution = ADC_RESOLUTION_12B; break; #if defined(STM32H7) case 16: resolution = ADC_RESOLUTION_16B; break; #endif default: mp_raise_msg_varg(&mp_type_ValueError, "resolution %d not supported", resolution); } for (uint32_t channel = ADC_FIRST_GPIO_CHANNEL; channel <= ADC_LAST_GPIO_CHANNEL; ++channel) { // only initialise those channels that are selected with the en_mask if (en_mask & (1 << channel)) { // Channels 0-16 correspond to real pins. Configure the GPIO pin in // ADC mode. const pin_obj_t *pin = pin_adc_table[channel]; if (pin) { mp_hal_pin_config(pin, MP_HAL_PIN_MODE_ADC, MP_HAL_PIN_PULL_NONE, 0); } } } adcx_init_periph(&adc_all->handle, resolution); } int adc_get_resolution(ADC_HandleTypeDef *adcHandle) { uint32_t res_reg = ADC_GET_RESOLUTION(adcHandle); switch (res_reg) { #if !defined(STM32H7) case ADC_RESOLUTION_6B: return 6; #endif case ADC_RESOLUTION_8B: return 8; case ADC_RESOLUTION_10B: return 10; #if defined(STM32H7) case ADC_RESOLUTION_16B: return 16; #endif } return 12; } STATIC uint32_t adc_config_and_read_ref(ADC_HandleTypeDef *adcHandle, uint32_t channel) { uint32_t raw_value = adc_config_and_read_channel(adcHandle, channel); // Scale raw reading to the number of bits used by the calibration constants return raw_value << (ADC_CAL_BITS - adc_get_resolution(adcHandle)); } int adc_read_core_temp(ADC_HandleTypeDef *adcHandle) { int32_t raw_value = adc_config_and_read_ref(adcHandle, ADC_CHANNEL_TEMPSENSOR); return ((raw_value - CORE_TEMP_V25) / CORE_TEMP_AVG_SLOPE) + 25; } #if MICROPY_PY_BUILTINS_FLOAT // correction factor for reference value STATIC volatile float adc_refcor = 1.0f; float adc_read_core_temp_float(ADC_HandleTypeDef *adcHandle) { int32_t raw_value = adc_config_and_read_ref(adcHandle, ADC_CHANNEL_TEMPSENSOR); float core_temp_avg_slope = (*ADC_CAL2 - *ADC_CAL1) / 80.0; return (((float)raw_value * adc_refcor - *ADC_CAL1) / core_temp_avg_slope) + 30.0f; } float adc_read_core_vbat(ADC_HandleTypeDef *adcHandle) { uint32_t raw_value = adc_config_and_read_ref(adcHandle, ADC_CHANNEL_VBAT); return raw_value * VBAT_DIV * ADC_SCALE * adc_refcor; } float adc_read_core_vref(ADC_HandleTypeDef *adcHandle) { uint32_t raw_value = adc_config_and_read_ref(adcHandle, ADC_CHANNEL_VREFINT); // update the reference correction factor adc_refcor = ((float)(*VREFIN_CAL)) / ((float)raw_value); return (*VREFIN_CAL) * ADC_SCALE; } #endif /******************************************************************************/ /* MicroPython bindings : adc_all object */ STATIC mp_obj_t adc_all_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) { // check number of arguments mp_arg_check_num(n_args, n_kw, 1, 2, false); // make ADCAll object pyb_adc_all_obj_t *o = m_new_obj(pyb_adc_all_obj_t); o->base.type = &pyb_adc_all_type; mp_int_t res = mp_obj_get_int(args[0]); uint32_t en_mask = 0xffffffff; if (n_args > 1) { en_mask = mp_obj_get_int(args[1]); } adc_init_all(o, res, en_mask); return MP_OBJ_FROM_PTR(o); } STATIC mp_obj_t adc_all_read_channel(mp_obj_t self_in, mp_obj_t channel) { pyb_adc_all_obj_t *self = MP_OBJ_TO_PTR(self_in); uint32_t chan = adc_get_internal_channel(mp_obj_get_int(channel)); uint32_t data = adc_config_and_read_channel(&self->handle, chan); return mp_obj_new_int(data); } STATIC MP_DEFINE_CONST_FUN_OBJ_2(adc_all_read_channel_obj, adc_all_read_channel); STATIC mp_obj_t adc_all_read_core_temp(mp_obj_t self_in) { pyb_adc_all_obj_t *self = MP_OBJ_TO_PTR(self_in); #if MICROPY_PY_BUILTINS_FLOAT float data = adc_read_core_temp_float(&self->handle); return mp_obj_new_float(data); #else int data = adc_read_core_temp(&self->handle); return mp_obj_new_int(data); #endif } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_temp_obj, adc_all_read_core_temp); #if MICROPY_PY_BUILTINS_FLOAT STATIC mp_obj_t adc_all_read_core_vbat(mp_obj_t self_in) { pyb_adc_all_obj_t *self = MP_OBJ_TO_PTR(self_in); float data = adc_read_core_vbat(&self->handle); return mp_obj_new_float(data); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_vbat_obj, adc_all_read_core_vbat); STATIC mp_obj_t adc_all_read_core_vref(mp_obj_t self_in) { pyb_adc_all_obj_t *self = MP_OBJ_TO_PTR(self_in); float data = adc_read_core_vref(&self->handle); return mp_obj_new_float(data); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_core_vref_obj, adc_all_read_core_vref); STATIC mp_obj_t adc_all_read_vref(mp_obj_t self_in) { pyb_adc_all_obj_t *self = MP_OBJ_TO_PTR(self_in); adc_read_core_vref(&self->handle); return mp_obj_new_float(ADC_SCALE_V * adc_refcor); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adc_all_read_vref_obj, adc_all_read_vref); #endif STATIC const mp_rom_map_elem_t adc_all_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_read_channel), MP_ROM_PTR(&adc_all_read_channel_obj) }, { MP_ROM_QSTR(MP_QSTR_read_core_temp), MP_ROM_PTR(&adc_all_read_core_temp_obj) }, #if MICROPY_PY_BUILTINS_FLOAT { MP_ROM_QSTR(MP_QSTR_read_core_vbat), MP_ROM_PTR(&adc_all_read_core_vbat_obj) }, { MP_ROM_QSTR(MP_QSTR_read_core_vref), MP_ROM_PTR(&adc_all_read_core_vref_obj) }, { MP_ROM_QSTR(MP_QSTR_read_vref), MP_ROM_PTR(&adc_all_read_vref_obj) }, #endif }; STATIC MP_DEFINE_CONST_DICT(adc_all_locals_dict, adc_all_locals_dict_table); const mp_obj_type_t pyb_adc_all_type = { { &mp_type_type }, .name = MP_QSTR_ADCAll, .make_new = adc_all_make_new, .locals_dict = (mp_obj_dict_t *)&adc_all_locals_dict, }; #endif // MICROPY_HW_ENABLE_ADC