/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2013-2017 Damien P. George * Copyright (c) 2021,2022 Renesas Electronics Corporation * Copyright (c) 2023 Vekatech Ltd. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // Options to control how MicroPython is built for this port, // overriding defaults in py/mpconfig.h. // board specific definitions #include "mpconfigboard.h" #include "mpconfigboard_common.h" #ifndef MICROPY_CONFIG_ROM_LEVEL #define MICROPY_CONFIG_ROM_LEVEL (MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES) #endif #ifndef MICROPY_HW_ENABLE_USBDEV #define MICROPY_HW_ENABLE_USBDEV (0) #endif #ifndef MICROPY_HW_ENABLE_UART_REPL #define MICROPY_HW_ENABLE_UART_REPL (1) // useful if there is no USB #endif #if MICROPY_HW_ENABLE_USBDEV // Enable USB-CDC serial port #ifndef MICROPY_HW_USB_CDC #define MICROPY_HW_USB_CDC (1) #endif // Enable USB Mass Storage with FatFS filesystem. #ifndef MICROPY_HW_USB_MSC #define MICROPY_HW_USB_MSC (0) #endif // RA unique ID is 16 bytes (hex string == 32) #ifndef MICROPY_HW_USB_DESC_STR_MAX #define MICROPY_HW_USB_DESC_STR_MAX (32) #endif #endif // memory allocation policies #ifndef MICROPY_GC_STACK_ENTRY_TYPE #if MICROPY_HW_SDRAM_SIZE #define MICROPY_GC_STACK_ENTRY_TYPE uint32_t #else #define MICROPY_GC_STACK_ENTRY_TYPE uint16_t #endif #endif #define MICROPY_ALLOC_PATH_MAX (128) // optimisations #ifndef MICROPY_OPT_COMPUTED_GOTO #define MICROPY_OPT_COMPUTED_GOTO (1) #endif // Don't enable lookup cache on M0 (low RAM) #ifndef MICROPY_OPT_MAP_LOOKUP_CACHE #define MICROPY_OPT_MAP_LOOKUP_CACHE (__CORTEX_M > 0) #endif // emitters #define MICROPY_PERSISTENT_CODE_LOAD (1) #ifndef MICROPY_EMIT_THUMB #define MICROPY_EMIT_THUMB (1) #endif #ifndef MICROPY_EMIT_INLINE_THUMB #define MICROPY_EMIT_INLINE_THUMB (1) #endif // Python internal features #define MICROPY_TRACKED_ALLOC (MICROPY_SSL_MBEDTLS || MICROPY_BLUETOOTH_BTSTACK) #define MICROPY_READER_VFS (1) #define MICROPY_ENABLE_GC (1) #define MICROPY_ENABLE_EMERGENCY_EXCEPTION_BUF (1) #define MICROPY_EMERGENCY_EXCEPTION_BUF_SIZE (0) #define MICROPY_REPL_INFO (1) #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ) #ifndef MICROPY_FLOAT_IMPL // can be configured by each board via mpconfigboard.mk #define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT) #endif #define MICROPY_USE_INTERNAL_ERRNO (1) #define MICROPY_SCHEDULER_DEPTH (8) #define MICROPY_SCHEDULER_STATIC_NODES (1) #define MICROPY_VFS (1) // control over Python builtins #ifndef MICROPY_PY_BUILTINS_HELP_TEXT #define MICROPY_PY_BUILTINS_HELP_TEXT ra_help_text #endif #ifndef MICROPY_PY_SYS_PLATFORM // let boards override it if they want #define MICROPY_PY_SYS_PLATFORM "renesas-ra" #endif #ifndef MICROPY_PY_THREAD #define MICROPY_PY_THREAD (0) #endif // extended modules #define MICROPY_PY_OS_INCLUDEFILE "ports/renesas-ra/modos.c" #define MICROPY_PY_OS_DUPTERM (3) #define MICROPY_PY_OS_DUPTERM_BUILTIN_STREAM (1) #define MICROPY_PY_OS_DUPTERM_STREAM_DETACHED_ATTACHED (1) #define MICROPY_PY_OS_SEP (1) #define MICROPY_PY_OS_SYNC (1) #define MICROPY_PY_OS_UNAME (1) #define MICROPY_PY_OS_URANDOM (MICROPY_HW_ENABLE_RNG) #define MICROPY_PY_TIME_GMTIME_LOCALTIME_MKTIME (1) #define MICROPY_PY_TIME_TIME_TIME_NS (1) #define MICROPY_PY_TIME_INCLUDEFILE "ports/renesas-ra/modtime.c" #define MICROPY_PY_LWIP_SOCK_RAW (MICROPY_PY_LWIP) #ifndef MICROPY_PY_MACHINE #define MICROPY_PY_MACHINE (1) #define MICROPY_PY_MACHINE_INCLUDEFILE "ports/renesas-ra/modmachine.c" #define MICROPY_PY_MACHINE_RESET (1) #define MICROPY_PY_MACHINE_BARE_METAL_FUNCS (1) #define MICROPY_PY_MACHINE_BOOTLOADER (1) #define MICROPY_PY_MACHINE_ADC (1) #define MICROPY_PY_MACHINE_ADC_INCLUDEFILE "ports/renesas-ra/machine_adc.c" #define MICROPY_PY_MACHINE_ADC_READ (1) #define MICROPY_PY_MACHINE_DHT_READINTO (1) #define MICROPY_PY_MACHINE_PULSE (1) #define MICROPY_PY_MACHINE_PIN_MAKE_NEW mp_pin_make_new #define MICROPY_PY_MACHINE_SOFTI2C (1) #define MICROPY_PY_MACHINE_SPI (1) #define MICROPY_PY_MACHINE_SPI_MSB (SPI_FIRSTBIT_MSB) #define MICROPY_PY_MACHINE_SPI_LSB (SPI_FIRSTBIT_LSB) #define MICROPY_PY_MACHINE_SOFTSPI (1) #define MICROPY_PY_MACHINE_TIMER (1) #define MICROPY_SOFT_TIMER_TICKS_MS uwTick #if MICROPY_HW_ENABLE_HW_PWM #define MICROPY_PY_MACHINE_PWM (1) #define MICROPY_PY_MACHINE_PWM_DUTY (1) #define MICROPY_PY_MACHINE_PWM_INCLUDEFILE "ports/renesas-ra/machine_pwm.c" #endif #define MICROPY_PY_MACHINE_UART (1) #define MICROPY_PY_MACHINE_UART_INCLUDEFILE "ports/renesas-ra/machine_uart.c" #define MICROPY_PY_MACHINE_UART_IRQ (1) #define MICROPY_PY_MACHINE_UART_READCHAR_WRITECHAR (1) #define MICROPY_PY_MACHINE_UART_SENDBREAK (1) #if MICROPY_HW_ENABLE_HW_DAC #define MICROPY_PY_MACHINE_DAC (1) #endif #endif #define MICROPY_HW_SOFTSPI_MIN_DELAY (0) #define MICROPY_HW_SOFTSPI_MAX_BAUDRATE (48000000 / 48) #ifndef MICROPY_PY_ONEWIRE #define MICROPY_PY_ONEWIRE (1) #endif // fatfs configuration used in ffconf.h #define MICROPY_FATFS_ENABLE_LFN (1) #define MICROPY_FATFS_LFN_CODE_PAGE 437 /* 1=SFN/ANSI 437=LFN/U.S.(OEM) */ #define MICROPY_FATFS_USE_LABEL (1) #define MICROPY_FATFS_RPATH (2) #define MICROPY_FATFS_MULTI_PARTITION (1) #if MICROPY_HW_USB_MSC // Set FatFS block size to flash sector size to avoid caching // the flash sector in memory to support smaller block sizes. #define MICROPY_FATFS_MAX_SS (FLASH_SECTOR_SIZE) #endif // By default networking should include sockets, ssl, websockets, webrepl, dupterm. #if MICROPY_PY_NETWORK #ifndef MICROPY_PY_NETWORK_HOSTNAME_DEFAULT #define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-ra" #endif #ifndef MICROPY_PY_USOCKET #define MICROPY_PY_USOCKET (1) #endif #ifndef MICROPY_PY_USSL #define MICROPY_PY_USSL (1) #endif #ifndef MICROPY_PY_UWEBSOCKET #define MICROPY_PY_UWEBSOCKET (1) #endif #ifndef MICROPY_PY_WEBREPL #define MICROPY_PY_WEBREPL (1) #endif #endif #if MICROPY_PY_MACHINE #define MACHINE_BUILTIN_MODULE_CONSTANTS \ { MP_ROM_QSTR(MP_QSTR_machine), MP_ROM_PTR(&mp_module_machine) }, #else #define MACHINE_BUILTIN_MODULE_CONSTANTS #endif // extra constants #define MICROPY_PORT_CONSTANTS \ MACHINE_BUILTIN_MODULE_CONSTANTS \ #define MP_STATE_PORT MP_STATE_VM #if MICROPY_PY_NETWORK_ESP_HOSTED extern const struct _mp_obj_type_t mod_network_esp_hosted_type; #define MICROPY_HW_NIC_ESP_HOSTED { MP_ROM_QSTR(MP_QSTR_WLAN), MP_ROM_PTR(&mod_network_esp_hosted_type) }, #else #define MICROPY_HW_NIC_ESP_HOSTED #endif #ifndef MICROPY_BOARD_NETWORK_INTERFACES #define MICROPY_BOARD_NETWORK_INTERFACES #endif #define MICROPY_PORT_NETWORK_INTERFACES \ MICROPY_HW_NIC_ESP_HOSTED \ MICROPY_BOARD_NETWORK_INTERFACES \ // Miscellaneous settings #ifndef MICROPY_HW_USB_VID #define MICROPY_HW_USB_VID (0xf055) #endif #ifndef MICROPY_HW_USB_PID #define MICROPY_HW_USB_PID (0x9800) #endif // type definitions for the specific machine #define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((uint32_t)(p) | 1)) #define MP_SSIZE_MAX (0x7fffffff) // Assume that if we already defined the obj repr then we also defined these items #ifndef MICROPY_OBJ_REPR #define UINT_FMT "%u" #define INT_FMT "%d" typedef int mp_int_t; // must be pointer size typedef unsigned int mp_uint_t; // must be pointer size #endif typedef long mp_off_t; #if MICROPY_HW_ENABLE_USBDEV #define MICROPY_HW_USBDEV_TASK_HOOK extern void mp_usbd_task(void); mp_usbd_task(); #define MICROPY_VM_HOOK_COUNT (10) #define MICROPY_VM_HOOK_INIT static uint vm_hook_divisor = MICROPY_VM_HOOK_COUNT; #define MICROPY_VM_HOOK_POLL if (--vm_hook_divisor == 0) { \ vm_hook_divisor = MICROPY_VM_HOOK_COUNT; \ MICROPY_HW_USBDEV_TASK_HOOK \ } #define MICROPY_VM_HOOK_LOOP MICROPY_VM_HOOK_POLL #define MICROPY_VM_HOOK_RETURN MICROPY_VM_HOOK_POLL #else #define MICROPY_HW_USBDEV_TASK_HOOK #endif #if MICROPY_PY_THREAD #define MICROPY_EVENT_POLL_HOOK \ do { \ extern void mp_handle_pending(bool); \ MICROPY_HW_USBDEV_TASK_HOOK \ mp_handle_pending(true); \ if (pyb_thread_enabled) { \ MP_THREAD_GIL_EXIT(); \ pyb_thread_yield(); \ MP_THREAD_GIL_ENTER(); \ } else { \ __WFI(); \ } \ } while (0); #define MICROPY_THREAD_YIELD() pyb_thread_yield() #else #define MICROPY_EVENT_POLL_HOOK \ do { \ extern void mp_handle_pending(bool); \ MICROPY_HW_USBDEV_TASK_HOOK \ mp_handle_pending(true); \ __WFI(); \ } while (0); #define MICROPY_THREAD_YIELD() #endif #ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE #define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1) #endif #ifndef MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS #define MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS (MICROPY_BLUETOOTH_NIMBLE) #endif // We need an implementation of the log2 function which is not a macro #define MP_NEED_LOG2 (1) // We need to provide a declaration/definition of alloca() #include