/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2018 Damien P. George * Copyright (c) 2021,2022 Renesas Electronics Corporation * Copyright (c) 2023 Vekatech Ltd. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // Common settings and defaults for board configuration. // The defaults here should be overridden in mpconfigboard.h. #include RA_HAL_H /*****************************************************************************/ // Feature settings with defaults // Whether to include the ra module, with peripheral register constants #ifndef MICROPY_PY_RA #define MICROPY_PY_RA (1) #endif // Whether to include the pyb module #ifndef MICROPY_PY_PYB #define MICROPY_PY_PYB (1) #endif // Whether to include legacy functions and classes in the pyb module #ifndef MICROPY_PY_PYB_LEGACY #define MICROPY_PY_PYB_LEGACY (1) #endif // Whether machine.bootloader() will enter the bootloader via reset, or direct jump. #ifndef MICROPY_HW_ENTER_BOOTLOADER_VIA_RESET #define MICROPY_HW_ENTER_BOOTLOADER_VIA_RESET (1) #endif // Whether to enable storage on the internal flash of the MCU #ifndef MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE #define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1) #endif // If internal flash storage is enabled, whether to use a second segment of flash. #ifndef MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE #define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE_SEGMENT2 (0) #endif // Whether to enable storage on the external QSPI flash of the MCU, instead of the internal flash #ifndef MICROPY_HW_HAS_QSPI_FLASH #define MICROPY_HW_HAS_QSPI_FLASH (0) #endif // Whether to enable access to SDCARD, through SDHI controller #ifndef MICROPY_HW_HAS_SDHI_CARD #define MICROPY_HW_HAS_SDHI_CARD (0) #endif // Whether to enable the RTC, exposed as pyb.RTC #ifndef MICROPY_HW_ENABLE_RTC #define MICROPY_HW_ENABLE_RTC (0) #endif // Whether to enable the hardware RNG peripheral, exposed as pyb.rng() #ifndef MICROPY_HW_ENABLE_RNG #define MICROPY_HW_ENABLE_RNG (0) #endif // Whether to enable the ADC peripheral, exposed as pyb.ADC and pyb.ADCAll #ifndef MICROPY_HW_ENABLE_ADC #define MICROPY_HW_ENABLE_ADC (1) #endif // Whether to enable the DAC peripheral, exposed as pyb.DAC #ifndef MICROPY_HW_ENABLE_DAC #define MICROPY_HW_ENABLE_DAC (0) #endif // Whether to enable the DCMI peripheral #ifndef MICROPY_HW_ENABLE_DCMI #define MICROPY_HW_ENABLE_DCMI (0) #endif // Whether to enable the PA0-PA3 servo driver, exposed as pyb.Servo #ifndef MICROPY_HW_ENABLE_SERVO #define MICROPY_HW_ENABLE_SERVO (0) #endif // Whether to enable a USR switch, exposed as pyb.Switch #ifndef MICROPY_HW_HAS_SWITCH #define MICROPY_HW_HAS_SWITCH (0) #endif // Whether to expose internal flash storage as pyb.Flash #ifndef MICROPY_HW_HAS_FLASH #define MICROPY_HW_HAS_FLASH (0) #endif // Whether to enable the MMA7660 driver, exposed as pyb.Accel #ifndef MICROPY_HW_HAS_MMA7660 #define MICROPY_HW_HAS_MMA7660 (0) #endif // Whether to enable the LCD32MK driver, exposed as pyb.LCD #ifndef MICROPY_HW_HAS_LCD #define MICROPY_HW_HAS_LCD (0) #endif // Whether to automatically mount (and boot from) the flash filesystem #ifndef MICROPY_HW_FLASH_MOUNT_AT_BOOT #define MICROPY_HW_FLASH_MOUNT_AT_BOOT (MICROPY_HW_ENABLE_STORAGE) #endif // The volume label used when creating the flash filesystem #ifndef MICROPY_HW_FLASH_FS_LABEL #define MICROPY_HW_FLASH_FS_LABEL "raflash" #endif // Function to determine if the given i2c_id is reserved for system use or not. #ifndef MICROPY_HW_I2C_IS_RESERVED #define MICROPY_HW_I2C_IS_RESERVED(i2c_id) (false) #endif // Function to determine if the given spi_id is reserved for system use or not. #ifndef MICROPY_HW_SPI_IS_RESERVED #define MICROPY_HW_SPI_IS_RESERVED(spi_id) (false) #endif // Function to determine if the given tim_id is reserved for system use or not. #ifndef MICROPY_HW_TIM_IS_RESERVED #define MICROPY_HW_TIM_IS_RESERVED(tim_id) (false) #endif // Function to determine if the given uart_id is reserved for system use or not. #ifndef MICROPY_HW_UART_IS_RESERVED #define MICROPY_HW_UART_IS_RESERVED(uart_id) (false) #endif /*****************************************************************************/ // General configuration // Heap start / end definitions #ifndef MICROPY_HEAP_START #define MICROPY_HEAP_START &_heap_start #endif #ifndef MICROPY_HEAP_END #define MICROPY_HEAP_END &_heap_end #endif // Configuration for RA series #if defined(RA4M1) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #elif defined(RA4M3) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) /* To be fixed */ // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #elif defined(RA4W1) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) /* To be fixed */ // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #elif defined(RA6M1) #define MP_HAL_UNIQUE_ID_ADDRESS (0x0100A150) /* To be fixed */ // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #elif defined(RA6M2) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) /* To be fixed */ // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #elif defined(RA6M3) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) /* To be fixed */ // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #elif defined(RA6M5) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) /* To be fixed */ // 16 IRQ + 1 EXTI_RTC_WAKEUP defined in exti.h #define PYB_EXTI_NUM_VECTORS (17) #define MICROPY_HW_MAX_TIMER (2) #define MICROPY_HW_MAX_UART (10) #define MICROPY_HW_MAX_LPUART (0) #else #error Unsupported MCU series #endif // If disabled then try normal (non-bypass) LSE first, with fallback to LSI. // If enabled first try LSE in bypass mode. If that fails to start, try non-bypass mode, with fallback to LSI. #ifndef MICROPY_HW_RTC_USE_BYPASS #define MICROPY_HW_RTC_USE_BYPASS (0) #endif #if MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE // Provide block device macros if internal flash storage is enabled #define MICROPY_HW_BDEV_IOCTL flash_bdev_ioctl #define MICROPY_HW_BDEV_READBLOCK flash_bdev_readblock #define MICROPY_HW_BDEV_WRITEBLOCK flash_bdev_writeblock #endif // Enable the storage sub-system if a block device is defined #if defined(MICROPY_HW_BDEV_IOCTL) #define MICROPY_HW_ENABLE_STORAGE (1) #else #define MICROPY_HW_ENABLE_STORAGE (0) #endif // Enable hardware I2C if there are any peripherals defined #if defined(MICROPY_HW_I2C0_SCL) || defined(MICROPY_HW_I2C1_SCL) \ || defined(MICROPY_HW_I2C2_SCL) #define MICROPY_PY_MACHINE_I2C (1) #else #define MICROPY_PY_MACHINE_I2C (0) #endif #if defined(MICROPY_HW_PWM_0A) || defined(MICROPY_HW_PWM_0B) \ || defined(MICROPY_HW_PWM_1A) || defined(MICROPY_HW_PWM_1B) \ || defined(MICROPY_HW_PWM_2A) || defined(MICROPY_HW_PWM_2B) \ || defined(MICROPY_HW_PWM_3A) || defined(MICROPY_HW_PWM_3B) \ || defined(MICROPY_HW_PWM_4A) || defined(MICROPY_HW_PWM_4B) \ || defined(MICROPY_HW_PWM_5A) || defined(MICROPY_HW_PWM_5B) \ || defined(MICROPY_HW_PWM_6A) || defined(MICROPY_HW_PWM_6B) \ || defined(MICROPY_HW_PWM_7A) || defined(MICROPY_HW_PWM_7B) \ || defined(MICROPY_HW_PWM_8A) || defined(MICROPY_HW_PWM_8B) \ || defined(MICROPY_HW_PWM_9A) || defined(MICROPY_HW_PWM_9B) \ || defined(MICROPY_HW_PWM_10A) || defined(MICROPY_HW_PWM_10B) \ || defined(MICROPY_HW_PWM_11A) || defined(MICROPY_HW_PWM_11B) \ || defined(MICROPY_HW_PWM_12A) || defined(MICROPY_HW_PWM_12B) \ || defined(MICROPY_HW_PWM_13A) || defined(MICROPY_HW_PWM_13B) #define MICROPY_HW_ENABLE_HW_PWM (1) #else #define MICROPY_HW_ENABLE_HW_PWM (0) #endif #if defined(MICROPY_HW_DAC0) || defined(MICROPY_HW_DAC1) #define MICROPY_HW_ENABLE_HW_DAC (1) #else #define MICROPY_HW_ENABLE_HW_DAC (0) #endif // Pin definition header file #define MICROPY_PIN_DEFS_PORT_H "pin_defs_ra.h"