mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
8 174 Commity
3 Gałęzie
4 Tagi
261 MiB
Wykres commitów

28 Commity (55f33240f3d7051d4213629e92437a36f1fac50e)

Autor SHA1 Wiadomość Data
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments 
There were several different spellings of MicroPython present in comments,
when there should be only one.
 2017-07-31 18:35:40 +10:00
Damien George 71ae3f389d cc3200: Remove remaining references to std.h. 2017-02-21 18:01:43 +11:00
Damien George c3f64d9799 py: Change qstr_* functions to use size_t as the type for str len arg. 2015-11-29 14:25:04 +00:00
danicampora 056cb288d9 cc3200: Remove includes of rom.h (must be included via rom_map.h). 2015-11-01 23:33:12 +01:00
Damien George 731f359292 all: Add py/mphal.h and use it in all ports. 
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for.  A
port will also provide mphalport.h with further HAL declarations.
 2015-10-31 19:14:30 +03:00
Daniel Campora 06d93b36f9 cc3200: Correct safe boot level 1 blinking period. 2015-09-21 22:30:04 +02:00
Daniel Campora c0c07fb1b6 cc3200: Don't clear the WDT special bit in the bootloader. 2015-08-16 20:18:11 +02:00
Daniel Campora 7da2fdc3cd cc3200: On the first boot, always make AP ssid='wipy-wlan'. 
On the first boot don't add the MAC address, this is to speed up
factory testing.
 2015-08-09 22:16:45 +02:00
Daniel Campora 2673374d18 cc3200: Refactor PRCM special user bits implementation. 2015-08-09 22:15:18 +02:00
Daniel Campora 31f6a6fa70 cc3200: Enable bootloader safe boot on latest firmware. 
The first safe boot level executes the latest firmware but skips
'main.py' and 'boot.py'.
 2015-08-09 19:22:19 +02:00
Daniel Campora e955089da0 cc3200: Implement new OTA mechanism with 2 firmware update slots. 2015-07-15 14:25:28 +02:00
Daniel Campora 9220dc466a cc3200: Correct udelay us to ticks calculation. 2015-07-08 13:13:37 +02:00
Daniel Campora 491c321720 cc3200: Re-config antenna selection when waking from suspended mode. 2015-06-07 13:28:47 +02:00
Daniel Campora a3acaa000c cc3200: Add antenna selection feature to WLAN. 2015-06-07 00:06:27 +02:00
Daniel Campora e800db562f cc3200: Add uhashlib. Supports SHA1 and SHA256. 2015-05-20 11:44:24 +02:00
Daniel Campora e282884e54 cc3200: When requesting safe boot, blink the led 3 times, not 4. 2015-04-29 15:27:21 +02:00
Damien George 259eaab9a9 cc3200: Clean up and reduce use/include of std.h. 2015-04-18 14:29:28 +01:00
Daniel Campora 2cd247e819 cc3200: Clean up bootloader makefile and remove superflous assert. 2015-04-17 09:55:24 +02:00
Damien George a86d40ccd4 cc3200: Get bootloader compiling with latest overhaul of printf code. 2015-04-16 14:30:17 +00:00
danicampora 2c103d5200 cc3200: Rewrite the PRCM RTC functionality methods. 
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
 2015-03-14 10:08:47 +01:00
danicampora 9e44383e3f cc3200: Add power management framework. Add mpcallback class. 
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
 2015-03-11 17:00:33 +01:00
danicampora 0475de1350 cc3200: Make WDT and HeartBeat constant objects on their own right. 2015-03-11 16:54:05 +01:00
danicampora 7a074a14ce cc3200: Implement safe boot pin and system led behaviour. 
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
 2015-02-25 23:17:17 +01:00
danicampora 11aa6ba456 cc3200: Add WDT functionality as part of the pyb module. 
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
 2015-02-25 11:37:29 +01:00
Damien George 3611c1de14 drivers/cc3100: Remove dependence on debug.h. 2015-02-21 22:04:07 +00:00
danicampora 5d2344d009 cc3200: Change safe-boot pin to GPIO28. 2015-02-20 16:40:19 +01:00
danicampora 2b899b6708 cc3200: Remove asserts from sl_Stop() and reduce timeout to 250ms. 2015-02-20 16:40:15 +01:00
danicampora 8785645a95 cc3200: Add cc3200 port of MicroPython. 
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
 2015-02-06 22:10:11 +00:00