mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

stm32/mphalport: Optimise the way that GPIO clocks are enabled.

pull/3502/merge
Damien George 2018-05-02 13:08:58 +10:00
rodzic 00a659f3ee
commit edb600b6a2
1 zmienionych plików z 21 dodań i 47 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

68
ports/stm32/mphalport.c
Wyświetl plik

@ -100,56 +100,30 @@ void mp_hal_ticks_cpu_enable(void) {
}
void mp_hal_gpio_clock_enable(GPIO_TypeDef *gpio) {
if (0) {
#ifdef __HAL_RCC_GPIOA_CLK_ENABLE
} else if (gpio == GPIOA) {
__HAL_RCC_GPIOA_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOB_CLK_ENABLE
} else if (gpio == GPIOB) {
__HAL_RCC_GPIOB_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOC_CLK_ENABLE
} else if (gpio == GPIOC) {
__HAL_RCC_GPIOC_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOD_CLK_ENABLE
} else if (gpio == GPIOD) {
__HAL_RCC_GPIOD_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOE_CLK_ENABLE
} else if (gpio == GPIOE) {
__HAL_RCC_GPIOE_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOF_CLK_ENABLE
} else if (gpio == GPIOF) {
__HAL_RCC_GPIOF_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOG_CLK_ENABLE
} else if (gpio == GPIOG) {
#if defined(STM32L476xx) || defined(STM32L486xx)
#if defined(STM32L476xx) || defined(STM32L486xx)
if (gpio == GPIOG) {
// Port G pins 2 thru 15 are powered using VddIO2 on these MCUs.
HAL_PWREx_EnableVddIO2();
#endif
__HAL_RCC_GPIOG_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOH_CLK_ENABLE
} else if (gpio == GPIOH) {
__HAL_RCC_GPIOH_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOI_CLK_ENABLE
} else if (gpio == GPIOI) {
__HAL_RCC_GPIOI_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOJ_CLK_ENABLE
} else if (gpio == GPIOJ) {
__HAL_RCC_GPIOJ_CLK_ENABLE();
#endif
#ifdef __HAL_RCC_GPIOK_CLK_ENABLE
} else if (gpio == GPIOK) {
__HAL_RCC_GPIOK_CLK_ENABLE();
#endif
}
#endif
// This logic assumes that all the GPIOx_EN bits are adjacent and ordered in one register
#if defined(STM32F4) || defined(STM32F7)
#define AHBxENR AHB1ENR
#define AHBxENR_GPIOAEN_Pos RCC_AHB1ENR_GPIOAEN_Pos
#elif defined(STM32H7)
#define AHBxENR AHB4ENR
#define AHBxENR_GPIOAEN_Pos RCC_AHB4ENR_GPIOAEN_Pos
#elif defined(STM32L4)
#define AHBxENR AHB2ENR
#define AHBxENR_GPIOAEN_Pos RCC_AHB2ENR_GPIOAEN_Pos
#endif
uint32_t gpio_idx = ((uint32_t)gpio - GPIOA_BASE) / (GPIOB_BASE - GPIOA_BASE);
RCC->AHBxENR |= 1 << (AHBxENR_GPIOAEN_Pos + gpio_idx);
volatile uint32_t tmp = RCC->AHBxENR; // Delay after enabling clock
(void)tmp;
}
void mp_hal_pin_config(mp_hal_pin_obj_t pin_obj, uint32_t mode, uint32_t pull, uint32_t alt) {