ports: Move MICROPY_PY_LWIP_ENTER/REENTER/EXIT defns to mphalport.h.

Following ad806df857 where the
MICROPY_PY_PENDSV_ENTER/REENTER/EXIT macro definitions were moved to
mphalport.h.

Signed-off-by: Damien George <damien@micropython.org>

ports/mimxrt/mpconfigport.h

@@ -134,11 +134,6 @@ uint32_t trng_random_u32(void);
 #define MICROPY_PY_HASHLIB_SHA1             (MICROPY_PY_SSL)
 // #define MICROPY_PY_CRYPTOLIB                (MICROPY_PY_SSL)
 
-// Prevent the "LWIP task" from running.
-#define MICROPY_PY_LWIP_ENTER   MICROPY_PY_PENDSV_ENTER
-#define MICROPY_PY_LWIP_REENTER MICROPY_PY_PENDSV_REENTER
-#define MICROPY_PY_LWIP_EXIT    MICROPY_PY_PENDSV_EXIT
-
 #ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
 #define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1)
 #endif

ports/mimxrt/mphalport.h

@@ -45,6 +45,11 @@
 #define MICROPY_PY_PENDSV_REENTER atomic_state = raise_irq_pri(IRQ_PRI_PENDSV);
 #define MICROPY_PY_PENDSV_EXIT    restore_irq_pri(atomic_state);
 
+// Prevent the "lwIP task" from running.
+#define MICROPY_PY_LWIP_ENTER   MICROPY_PY_PENDSV_ENTER
+#define MICROPY_PY_LWIP_REENTER MICROPY_PY_PENDSV_REENTER
+#define MICROPY_PY_LWIP_EXIT    MICROPY_PY_PENDSV_EXIT
+
 #define MICROPY_HW_USB_CDC_TX_TIMEOUT   (500)
 
 #define MP_HAL_PIN_FMT                  "%q"

ports/renesas-ra/mpconfigport.h

@@ -292,10 +292,6 @@ typedef long mp_off_t;
 #define MICROPY_THREAD_YIELD()
 #endif
 
-#define MICROPY_PY_LWIP_ENTER
-#define MICROPY_PY_LWIP_REENTER
-#define MICROPY_PY_LWIP_EXIT
-
 #ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
 #define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1)
 #endif

ports/renesas-ra/mphalport.h

@@ -35,6 +35,10 @@
 #define MICROPY_PY_PENDSV_ENTER   uint32_t atomic_state = raise_irq_pri(IRQ_PRI_PENDSV)
 #define MICROPY_PY_PENDSV_EXIT    restore_irq_pri(atomic_state)
 
+#define MICROPY_PY_LWIP_ENTER
+#define MICROPY_PY_LWIP_REENTER
+#define MICROPY_PY_LWIP_EXIT
+
 #define MICROPY_HW_USB_CDC_TX_TIMEOUT (500)
 
 extern const unsigned char mp_hal_status_to_errno_table[4];

ports/rp2/mpconfigport.h

@@ -245,11 +245,6 @@ extern const struct _mp_obj_type_t mod_network_nic_type_wiznet5k;
 #define MICROPY_HW_BOOTSEL_DELAY_US 8
 #endif
 
-// Prevent the "lwIP task" from running when unsafe to do so.
-#define MICROPY_PY_LWIP_ENTER   lwip_lock_acquire();
-#define MICROPY_PY_LWIP_REENTER lwip_lock_acquire();
-#define MICROPY_PY_LWIP_EXIT    lwip_lock_release();
-
 // Port level Wait-for-Event macro
 //
 // Do not use this macro directly, include py/runtime.h and

ports/rp2/mphalport.h

@@ -43,6 +43,11 @@
 #define MICROPY_PY_PENDSV_ENTER   pendsv_suspend()
 #define MICROPY_PY_PENDSV_EXIT    pendsv_resume()
 
+// Prevent the "lwIP task" from running when unsafe to do so.
+#define MICROPY_PY_LWIP_ENTER   lwip_lock_acquire();
+#define MICROPY_PY_LWIP_REENTER lwip_lock_acquire();
+#define MICROPY_PY_LWIP_EXIT    lwip_lock_release();
+
 extern int mp_interrupt_char;
 extern ringbuf_t stdin_ringbuf;
 

ports/stm32/mpconfigport.h

@@ -268,11 +268,6 @@ typedef long mp_off_t;
 // Configuration for shared/runtime/softtimer.c.
 #define MICROPY_SOFT_TIMER_TICKS_MS uwTick
 
-// Prevent the "LWIP task" from running.
-#define MICROPY_PY_LWIP_ENTER   MICROPY_PY_PENDSV_ENTER
-#define MICROPY_PY_LWIP_REENTER MICROPY_PY_PENDSV_REENTER
-#define MICROPY_PY_LWIP_EXIT    MICROPY_PY_PENDSV_EXIT
-
 #ifndef MICROPY_PY_NETWORK_HOSTNAME_DEFAULT
 #define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-stm32"
 #endif

ports/stm32/mphalport.h

@@ -53,6 +53,11 @@ void mp_hal_set_interrupt_char(int c); // -1 to disable
 #define MICROPY_PY_PENDSV_REENTER atomic_state = raise_irq_pri(IRQ_PRI_PENDSV);
 #define MICROPY_PY_PENDSV_EXIT    restore_irq_pri(atomic_state);
 
+// Prevent the "lwIP task" from running.
+#define MICROPY_PY_LWIP_ENTER   MICROPY_PY_PENDSV_ENTER
+#define MICROPY_PY_LWIP_REENTER MICROPY_PY_PENDSV_REENTER
+#define MICROPY_PY_LWIP_EXIT    MICROPY_PY_PENDSV_EXIT
+
 // Timing functions.
 
 #if __CORTEX_M == 0