stmhal: Add DAC driver.

stmhal/Makefile

@@ -92,9 +92,9 @@ SRC_C = \
 	lcd.c \
 	accel.c \
 	servo.c \
+	dac.c \
 
 #	timer.c \
-#	audio.c \
 #	i2c.c \
 #	adc.c \
 #	pybwlan.c \
@@ -106,6 +106,8 @@ SRC_S = \
 SRC_HAL = $(addprefix $(HAL_DIR)/src/,\
 	stm32f4xx_hal.c \
 	stm32f4xx_hal_cortex.c \
+	stm32f4xx_hal_dac.c \
+	stm32f4xx_hal_dac_ex.c \
 	stm32f4xx_hal_dma.c \
 	stm32f4xx_hal_flash.c \
 	stm32f4xx_hal_flash_ex.c \

stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h

@@ -16,7 +16,7 @@
 #define MICROPY_HW_ENABLE_RTC       (0)
 #define MICROPY_HW_ENABLE_TIMER     (1)
 #define MICROPY_HW_ENABLE_SERVO     (1)
-#define MICROPY_HW_ENABLE_AUDIO     (0)
+#define MICROPY_HW_ENABLE_DAC       (0)
 
 // USRSW is pulled low. Pressing the button makes the input go high.
 #define USRSW_PIN           (pin_B11)

stmhal/boards/PYBOARD3/mpconfigboard.h

@@ -12,7 +12,7 @@
 #define MICROPY_HW_ENABLE_RTC       (1)
 #define MICROPY_HW_ENABLE_TIMER     (1)
 #define MICROPY_HW_ENABLE_SERVO     (1)
-#define MICROPY_HW_ENABLE_AUDIO     (0)
+#define MICROPY_HW_ENABLE_DAC       (0)
 
 // USRSW has no pullup or pulldown, and pressing the switch makes the input go low
 #define USRSW_PIN           (pin_A13)

stmhal/boards/PYBOARD4/mpconfigboard.h

@@ -12,7 +12,7 @@
 #define MICROPY_HW_ENABLE_RTC       (1)
 #define MICROPY_HW_ENABLE_TIMER     (1)
 #define MICROPY_HW_ENABLE_SERVO     (1)
-#define MICROPY_HW_ENABLE_AUDIO     (1)
+#define MICROPY_HW_ENABLE_DAC       (1)
 
 // USRSW has no pullup or pulldown, and pressing the switch makes the input go low
 #define USRSW_PIN           (pin_B3)

stmhal/boards/PYBv10/mpconfigboard.h

@@ -12,7 +12,7 @@
 #define MICROPY_HW_ENABLE_RTC       (1)
 #define MICROPY_HW_ENABLE_TIMER     (1)
 #define MICROPY_HW_ENABLE_SERVO     (1)
-#define MICROPY_HW_ENABLE_AUDIO     (1)
+#define MICROPY_HW_ENABLE_DAC       (1)
 
 // USRSW has no pullup or pulldown, and pressing the switch makes the input go low
 #define USRSW_PIN           (pin_B3)

stmhal/boards/STM32F4DISC/mpconfigboard.h

@@ -12,7 +12,7 @@
 #define MICROPY_HW_ENABLE_RTC       (1)
 #define MICROPY_HW_ENABLE_TIMER     (1)
 #define MICROPY_HW_ENABLE_SERVO     (0)
-#define MICROPY_HW_ENABLE_AUDIO     (0)
+#define MICROPY_HW_ENABLE_DAC       (0)
 
 // USRSW is pulled low. Pressing the button makes the input go high.
 #define USRSW_PIN           (pin_A0)

stmhal/dac.c

@@ -0,0 +1,276 @@
+#include <stdint.h>
+#include <string.h>
+
+#include "stm32f4xx_hal.h"
+
+#include "nlr.h"
+#include "misc.h"
+#include "mpconfig.h"
+#include "qstr.h"
+#include "parse.h"
+#include "obj.h"
+#include "map.h"
+#include "runtime.h"
+#include "dac.h"
+
+TIM_HandleTypeDef TIM6_Handle;
+STATIC DAC_HandleTypeDef DAC_Handle;
+
+void dac_init(void) {
+    DAC_Handle.Instance = DAC;
+    DAC_Handle.State = HAL_DAC_STATE_RESET;
+    HAL_DAC_Init(&DAC_Handle);
+}
+
+STATIC void TIM6_Config(uint freq) {
+    // TIM6 clock enable
+    __TIM6_CLK_ENABLE();
+
+    // Compute the prescaler value so TIM6 triggers at freq-Hz
+    uint16_t period = (uint16_t) ((SystemCoreClock / 2) / freq) - 1;
+
+    // time base clock configuration
+    TIM6_Handle.Instance = TIM6;
+    TIM6_Handle.Init.Period = period;
+    TIM6_Handle.Init.Prescaler = 0; // timer runs at SystemCoreClock / 2
+    TIM6_Handle.Init.ClockDivision = 0; // unused for TIM6
+    TIM6_Handle.Init.CounterMode = TIM_COUNTERMODE_UP; // unused for TIM6
+    HAL_TIM_Base_Init(&TIM6_Handle);
+
+    // TIM6 TRGO selection
+    TIM_MasterConfigTypeDef config;
+    config.MasterOutputTrigger = TIM_TRGO_UPDATE;
+    config.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+    HAL_TIMEx_MasterConfigSynchronization(&TIM6_Handle, &config);
+
+    // TIM6 start counter
+    HAL_TIM_Base_Start(&TIM6_Handle);
+}
+
+/******************************************************************************/
+// Micro Python bindings
+
+typedef struct _pyb_dac_obj_t {
+    mp_obj_base_t base;
+    uint32_t dac_channel; // DAC_CHANNEL_1 or DAC_CHANNEL_2
+    DMA_Stream_TypeDef *dma_stream; // DMA1_Stream5 or DMA1_Stream6
+    machine_uint_t state;
+} pyb_dac_obj_t;
+
+STATIC pyb_dac_obj_t pyb_dac_channel_1 = {{&pyb_dac_type}, DAC_CHANNEL_1, DMA1_Stream5};
+STATIC pyb_dac_obj_t pyb_dac_channel_2 = {{&pyb_dac_type}, DAC_CHANNEL_2, DMA1_Stream6};
+
+// create the dac object
+// currently support either DAC1 on X5 (id = 1) or DAC2 on X6 (id = 2)
+
+STATIC mp_obj_t pyb_dac_make_new(mp_obj_t type_in, uint n_args, uint n_kw, const mp_obj_t *args) {
+    // check arguments
+    if (!(n_args == 1 && n_kw == 0)) {
+        nlr_jump(mp_obj_new_exception_msg(&mp_type_ValueError, "Dac accepts 1 argument"));
+    }
+
+    machine_int_t dac_id = mp_obj_get_int(args[0]);
+    uint32_t pin;
+    pyb_dac_obj_t *dac_obj;
+
+    if (dac_id == 1) {
+        pin = GPIO_PIN_4;
+        dac_obj = &pyb_dac_channel_1;
+    } else if (dac_id == 2) {
+        pin = GPIO_PIN_5;
+        dac_obj = &pyb_dac_channel_2;
+    } else {
+        nlr_jump(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "Dac %d does not exist", dac_id));
+    }
+
+    // GPIO configuration
+    GPIO_InitTypeDef GPIO_InitStructure;
+    GPIO_InitStructure.Pin = pin;
+    GPIO_InitStructure.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStructure.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+    // DAC peripheral clock
+    __DAC_CLK_ENABLE();
+
+    // stop anything already going on
+    HAL_DAC_Stop(&DAC_Handle, dac_obj->dac_channel);
+    HAL_DAC_Stop_DMA(&DAC_Handle, dac_obj->dac_channel);
+
+    dac_obj->state = 0;
+
+    // return object
+    return dac_obj;
+}
+
+STATIC mp_obj_t pyb_dac_noise(mp_obj_t self_in, mp_obj_t freq) {
+    pyb_dac_obj_t *self = self_in;
+
+    // set TIM6 to trigger the DAC at the given frequency
+    TIM6_Config(mp_obj_get_int(freq));
+
+    if (self->state != 2) {
+        // configure DAC to trigger via TIM6
+        DAC_ChannelConfTypeDef config;
+        config.DAC_Trigger = DAC_TRIGGER_T6_TRGO;
+        config.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+        HAL_DAC_ConfigChannel(&DAC_Handle, &config, self->dac_channel);
+        self->state = 2;
+    }
+
+    // set noise wave generation
+    HAL_DACEx_NoiseWaveGenerate(&DAC_Handle, self->dac_channel, DAC_LFSRUNMASK_BITS10_0);
+    HAL_DAC_SetValue(&DAC_Handle, self->dac_channel, DAC_ALIGN_12B_L, 0x7ff0);
+    HAL_DAC_Start(&DAC_Handle, self->dac_channel);
+
+    return mp_const_none;
+}
+
+STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_dac_noise_obj, pyb_dac_noise);
+
+STATIC mp_obj_t pyb_dac_triangle(mp_obj_t self_in, mp_obj_t freq) {
+    pyb_dac_obj_t *self = self_in;
+
+    // set TIM6 to trigger the DAC at the given frequency
+    TIM6_Config(mp_obj_get_int(freq));
+
+    if (self->state != 2) {
+        // configure DAC to trigger via TIM6
+        DAC_ChannelConfTypeDef config;
+        config.DAC_Trigger = DAC_TRIGGER_T6_TRGO;
+        config.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+        HAL_DAC_ConfigChannel(&DAC_Handle, &config, self->dac_channel);
+        self->state = 2;
+    }
+
+    // set triangle wave generation
+    HAL_DACEx_TriangleWaveGenerate(&DAC_Handle, self->dac_channel, DAC_TRIANGLEAMPLITUDE_1023);
+    HAL_DAC_SetValue(&DAC_Handle, self->dac_channel, DAC_ALIGN_12B_R, 0x100);
+    HAL_DAC_Start(&DAC_Handle, self->dac_channel);
+
+    return mp_const_none;
+}
+
+STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_dac_triangle_obj, pyb_dac_triangle);
+
+// direct access to DAC (8 bit only at the moment)
+STATIC mp_obj_t pyb_dac_write(mp_obj_t self_in, mp_obj_t val) {
+    pyb_dac_obj_t *self = self_in;
+
+    if (self->state != 1) {
+        DAC_ChannelConfTypeDef config;
+        config.DAC_Trigger = DAC_TRIGGER_NONE;
+        config.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
+        HAL_DAC_ConfigChannel(&DAC_Handle, &config, self->dac_channel);
+        self->state = 1;
+    }
+
+    HAL_DAC_SetValue(&DAC_Handle, self->dac_channel, DAC_ALIGN_8B_R, mp_obj_get_int(val));
+    HAL_DAC_Start(&DAC_Handle, self->dac_channel);
+
+    return mp_const_none;
+}
+
+STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_dac_write_obj, pyb_dac_write);
+
+// initiates a burst of RAM->DAC using DMA
+// input data is treated as an array of bytes (8 bit data)
+// TIM6 is used to set the frequency of the transfer
+// TODO still needs some attention to get it working properly
+mp_obj_t pyb_dac_dma(uint n_args, const mp_obj_t *args, mp_map_t *kw_args) {
+    pyb_dac_obj_t *self = args[0];
+
+    // set TIM6 to trigger the DAC at the given frequency
+    TIM6_Config(mp_obj_get_int(args[2]));
+
+    mp_obj_type_t *type = mp_obj_get_type(args[1]);
+    if (type->buffer_p.get_buffer == NULL) {
+        nlr_jump(mp_obj_new_exception_msg(&mp_type_TypeError, "buffer argument must support buffer protocol"));
+    }
+    buffer_info_t bufinfo;
+    type->buffer_p.get_buffer(args[1], &bufinfo, BUFFER_READ);
+
+    __DMA1_CLK_ENABLE();
+
+    /*
+    DMA_Cmd(self->dma_stream, DISABLE);
+    while (DMA_GetCmdStatus(self->dma_stream) != DISABLE) {
+    }
+
+    DAC_Cmd(self->dac_channel, DISABLE);
+    */
+
+    /*
+    // DAC channel configuration
+    DAC_InitTypeDef DAC_InitStructure;
+    DAC_InitStructure.DAC_Trigger = DAC_Trigger_T7_TRGO;
+    DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
+    DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_1; // unused, but need to set it to a valid value
+    DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+    DAC_Init(self->dac_channel, &DAC_InitStructure);
+    */
+
+    if (self->state != 3) {
+        DAC_ChannelConfTypeDef config;
+        config.DAC_Trigger = DAC_TRIGGER_T6_TRGO;
+        config.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+        HAL_DAC_ConfigChannel(&DAC_Handle, &config, self->dac_channel);
+        self->state = 3;
+    }
+
+    // DMA1_Stream[67] channel7 configuration
+    DMA_HandleTypeDef DMA_Handle;
+    DMA_Handle.Instance = self->dma_stream;
+    DMA_Handle.Init.Channel = DMA_CHANNEL_7;
+    DMA_Handle.Init.Direction = DMA_MEMORY_TO_PERIPH;
+    DMA_Handle.Init.PeriphInc = DMA_PINC_DISABLE;
+    DMA_Handle.Init.MemInc = DMA_MINC_ENABLE;
+    DMA_Handle.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    DMA_Handle.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+    mp_map_elem_t *kw_mode = mp_map_lookup(kw_args, MP_OBJ_NEW_QSTR(qstr_from_str("mode")), MP_MAP_LOOKUP);
+    DMA_Handle.Init.Mode = kw_mode == NULL ? DMA_NORMAL : mp_obj_get_int(kw_mode->value); // normal = 0, circular = 0x100
+    DMA_Handle.Init.Priority = DMA_PRIORITY_HIGH;
+    DMA_Handle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+    DMA_Handle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL;
+    DMA_Handle.Init.MemBurst = DMA_MBURST_SINGLE;
+    DMA_Handle.Init.PeriphBurst = DMA_PBURST_SINGLE;
+    HAL_DMA_Init(&DMA_Handle);
+
+    __HAL_LINKDMA(&DAC_Handle, DMA_Handle1, DMA_Handle);
+
+    HAL_DAC_Start_DMA(&DAC_Handle, self->dac_channel, (uint32_t*)bufinfo.buf, bufinfo.len, DAC_ALIGN_8B_R);
+
+    /*
+    // enable DMA stream
+    DMA_Cmd(self->dma_stream, ENABLE);
+    while (DMA_GetCmdStatus(self->dma_stream) == DISABLE) {
+    }
+
+    // enable DAC channel
+    DAC_Cmd(self->dac_channel, ENABLE);
+
+    // enable DMA for DAC channel
+    DAC_DMACmd(self->dac_channel, ENABLE);
+    */
+
+    //printf("DMA: %p %lu\n", bufinfo.buf, bufinfo.len);
+
+    return mp_const_none;
+}
+
+STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_dac_dma_obj, 3, pyb_dac_dma);
+
+STATIC const mp_method_t pyb_dac_methods[] = {
+    { "noise", &pyb_dac_noise_obj },
+    { "triangle", &pyb_dac_triangle_obj },
+    { "write", &pyb_dac_write_obj },
+    { "dma", &pyb_dac_dma_obj },
+    { NULL, NULL },
+};
+
+const mp_obj_type_t pyb_dac_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_DAC,
+    .make_new = pyb_dac_make_new,
+    .methods = pyb_dac_methods,
+};

stmhal/dac.h

@@ -0,0 +1,3 @@
+void dac_init(void);
+
+extern const mp_obj_type_t pyb_dac_type;

stmhal/main.c

@@ -37,6 +37,7 @@
 #include "lcd.h"
 #include "accel.h"
 #include "servo.h"
+#include "dac.h"
 #include "pin.h"
 #if 0
 #include "timer.h"
@@ -238,6 +239,11 @@ soft_reset:
 #endif
 #endif
 
+#if MICROPY_HW_ENABLE_DAC
+    // DAC
+    dac_init();
+#endif
+
     pin_map_init();
 
     // we pre-import the pyb module

stmhal/pybmodule.c

@@ -24,11 +24,11 @@
 #include "sdcard.h"
 #include "accel.h"
 #include "servo.h"
+#include "dac.h"
 #if 0
 #include "usb.h"
 #include "i2c.h"
 #include "adc.h"
-#include "audio.h"
 #endif
 #include "pybmodule.h"
 #include "ff.h"
@@ -268,10 +268,10 @@ STATIC const mp_map_elem_t pyb_module_globals_table[] = {
 #if 0
     { MP_OBJ_NEW_QSTR(MP_QSTR_ADC_all), (mp_obj_t)&pyb_ADC_all_obj },
     { MP_OBJ_NEW_QSTR(MP_QSTR_ADC), (mp_obj_t)&pyb_ADC_obj },
-
-#if MICROPY_HW_ENABLE_AUDIO
-    { MP_OBJ_NEW_QSTR(MP_QSTR_Audio), (mp_obj_t)&pyb_Audio_obj },
 #endif
+
+#if MICROPY_HW_ENABLE_DAC
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DAC), (mp_obj_t)&pyb_dac_type },
 #endif
 
     // input

stmhal/qstrdefsport.h

@@ -33,7 +33,7 @@ Q(gpio_out)
 Q(Usart)
 Q(ADC)
 Q(ADC_all)
-Q(Audio)
+Q(DAC)
 Q(open)
 Q(File)
 // Entries for sys.path