diff --git a/ports/stm32/usbdev/class/inc/usbd_msc_bot.h b/ports/stm32/usbdev/class/inc/usbd_msc_bot.h
index 41f8ab5a53..4edc912fe1 100644
--- a/ports/stm32/usbdev/class/inc/usbd_msc_bot.h
+++ b/ports/stm32/usbdev/class/inc/usbd_msc_bot.h
@@ -1,151 +1,151 @@
-/**
- ******************************************************************************
- * @file usbd_msc_bot.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief header for the usbd_msc_bot.c file
- ******************************************************************************
- * @attention
- *
- *
© COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#include "usbd_core.h"
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_MSC_BOT_H
-#define __USBD_MSC_BOT_H
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup MSC_BOT
- * @brief This file is the Header file for usbd_bot.c
- * @{
- */
-
-
-/** @defgroup USBD_CORE_Exported_Defines
- * @{
- */
-#define USBD_BOT_IDLE 0 /* Idle state */
-#define USBD_BOT_DATA_OUT 1 /* Data Out state */
-#define USBD_BOT_DATA_IN 2 /* Data In state */
-#define USBD_BOT_LAST_DATA_IN 3 /* Last Data In Last */
-#define USBD_BOT_SEND_DATA 4 /* Send Immediate data */
-#define USBD_BOT_NO_DATA 5 /* No data Stage */
-
-#define USBD_BOT_CBW_SIGNATURE 0x43425355
-#define USBD_BOT_CSW_SIGNATURE 0x53425355
-#define USBD_BOT_CBW_LENGTH 31
-#define USBD_BOT_CSW_LENGTH 13
-#define USBD_BOT_MAX_DATA 256
-
-/* CSW Status Definitions */
-#define USBD_CSW_CMD_PASSED 0x00
-#define USBD_CSW_CMD_FAILED 0x01
-#define USBD_CSW_PHASE_ERROR 0x02
-
-/* BOT Status */
-#define USBD_BOT_STATUS_NORMAL 0
-#define USBD_BOT_STATUS_RECOVERY 1
-#define USBD_BOT_STATUS_ERROR 2
-
-
-#define USBD_DIR_IN 0
-#define USBD_DIR_OUT 1
-#define USBD_BOTH_DIR 2
-
-/**
- * @}
- */
-
-/** @defgroup MSC_CORE_Private_TypesDefinitions
- * @{
- */
-
-typedef struct
-{
- uint32_t dSignature;
- uint32_t dTag;
- uint32_t dDataLength;
- uint8_t bmFlags;
- uint8_t bLUN;
- uint8_t bCBLength;
- uint8_t CB[16];
- uint8_t ReservedForAlign;
-}
-USBD_MSC_BOT_CBWTypeDef;
-
-
-typedef struct
-{
- uint32_t dSignature;
- uint32_t dTag;
- uint32_t dDataResidue;
- uint8_t bStatus;
- uint8_t ReservedForAlign[3];
-}
-USBD_MSC_BOT_CSWTypeDef;
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_CORE_Exported_Types
- * @{
- */
-
-/**
- * @}
- */
-/** @defgroup USBD_CORE_Exported_FunctionsPrototypes
- * @{
- */
-void MSC_BOT_Init (USBD_HandleTypeDef *pdev);
-void MSC_BOT_Reset (USBD_HandleTypeDef *pdev);
-void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev);
-void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
- uint8_t epnum);
-
-void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
- uint8_t epnum);
-
-void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
- uint8_t CSW_Status);
-
-void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev,
- uint8_t epnum);
-/**
- * @}
- */
-
-#endif /* __USBD_MSC_BOT_H */
-/**
- * @}
- */
-
-/**
-* @}
-*/
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+ ******************************************************************************
+ * @file usbd_msc_bot.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief header for the usbd_msc_bot.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#include "usbd_core.h"
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_MSC_BOT_H
+#define __USBD_MSC_BOT_H
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup MSC_BOT
+ * @brief This file is the Header file for usbd_bot.c
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+#define USBD_BOT_IDLE 0 /* Idle state */
+#define USBD_BOT_DATA_OUT 1 /* Data Out state */
+#define USBD_BOT_DATA_IN 2 /* Data In state */
+#define USBD_BOT_LAST_DATA_IN 3 /* Last Data In Last */
+#define USBD_BOT_SEND_DATA 4 /* Send Immediate data */
+#define USBD_BOT_NO_DATA 5 /* No data Stage */
+
+#define USBD_BOT_CBW_SIGNATURE 0x43425355
+#define USBD_BOT_CSW_SIGNATURE 0x53425355
+#define USBD_BOT_CBW_LENGTH 31
+#define USBD_BOT_CSW_LENGTH 13
+#define USBD_BOT_MAX_DATA 256
+
+/* CSW Status Definitions */
+#define USBD_CSW_CMD_PASSED 0x00
+#define USBD_CSW_CMD_FAILED 0x01
+#define USBD_CSW_PHASE_ERROR 0x02
+
+/* BOT Status */
+#define USBD_BOT_STATUS_NORMAL 0
+#define USBD_BOT_STATUS_RECOVERY 1
+#define USBD_BOT_STATUS_ERROR 2
+
+
+#define USBD_DIR_IN 0
+#define USBD_DIR_OUT 1
+#define USBD_BOTH_DIR 2
+
+/**
+ * @}
+ */
+
+/** @defgroup MSC_CORE_Private_TypesDefinitions
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t dSignature;
+ uint32_t dTag;
+ uint32_t dDataLength;
+ uint8_t bmFlags;
+ uint8_t bLUN;
+ uint8_t bCBLength;
+ uint8_t CB[16];
+ uint8_t ReservedForAlign;
+}
+USBD_MSC_BOT_CBWTypeDef;
+
+
+typedef struct
+{
+ uint32_t dSignature;
+ uint32_t dTag;
+ uint32_t dDataResidue;
+ uint8_t bStatus;
+ uint8_t ReservedForAlign[3];
+}
+USBD_MSC_BOT_CSWTypeDef;
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+/** @defgroup USBD_CORE_Exported_FunctionsPrototypes
+ * @{
+ */
+void MSC_BOT_Init (USBD_HandleTypeDef *pdev);
+void MSC_BOT_Reset (USBD_HandleTypeDef *pdev);
+void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev);
+void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
+ uint8_t CSW_Status);
+
+void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+/**
+ * @}
+ */
+
+#endif /* __USBD_MSC_BOT_H */
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/ports/stm32/usbdev/class/inc/usbd_msc_data.h b/ports/stm32/usbdev/class/inc/usbd_msc_data.h
index f468267f43..afd39e4f09 100644
--- a/ports/stm32/usbdev/class/inc/usbd_msc_data.h
+++ b/ports/stm32/usbdev/class/inc/usbd_msc_data.h
@@ -1,104 +1,104 @@
-/**
- ******************************************************************************
- * @file usbd_msc_data.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief header for the usbd_msc_data.c file
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#ifndef _USBD_MSC_DATA_H_
-#define _USBD_MSC_DATA_H_
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_conf.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USB_INFO
- * @brief general defines for the usb device library file
- * @{
- */
-
-/** @defgroup USB_INFO_Exported_Defines
- * @{
- */
-#define MODE_SENSE6_LEN 8
-#define MODE_SENSE10_LEN 8
-#define LENGTH_INQUIRY_PAGE00 7
-#define LENGTH_FORMAT_CAPACITIES 20
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_INFO_Exported_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_INFO_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_INFO_Exported_Variables
- * @{
- */
-extern const uint8_t MSC_Page00_Inquiry_Data[];
-extern const uint8_t MSC_Mode_Sense6_data[];
-extern const uint8_t MSC_Mode_Sense10_data[] ;
-
-/**
- * @}
- */
-
-/** @defgroup USBD_INFO_Exported_FunctionsPrototype
- * @{
- */
-
-/**
- * @}
- */
-
-#endif /* _USBD_MSC_DATA_H_ */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_msc_data.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief header for the usbd_msc_data.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef _USBD_MSC_DATA_H_
+#define _USBD_MSC_DATA_H_
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_INFO
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_INFO_Exported_Defines
+ * @{
+ */
+#define MODE_SENSE6_LEN 8
+#define MODE_SENSE10_LEN 8
+#define LENGTH_INQUIRY_PAGE00 7
+#define LENGTH_FORMAT_CAPACITIES 20
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_INFO_Exported_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_INFO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_INFO_Exported_Variables
+ * @{
+ */
+extern const uint8_t MSC_Page00_Inquiry_Data[];
+extern const uint8_t MSC_Mode_Sense6_data[];
+extern const uint8_t MSC_Mode_Sense10_data[] ;
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_INFO_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* _USBD_MSC_DATA_H_ */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/class/inc/usbd_msc_scsi.h b/ports/stm32/usbdev/class/inc/usbd_msc_scsi.h
index 34f059ee5d..b657cead09 100644
--- a/ports/stm32/usbdev/class/inc/usbd_msc_scsi.h
+++ b/ports/stm32/usbdev/class/inc/usbd_msc_scsi.h
@@ -1,195 +1,195 @@
-/**
- ******************************************************************************
- * @file usbd_msc_scsi.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief header for the usbd_msc_scsi.c file
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_MSC_SCSI_H
-#define __USBD_MSC_SCSI_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_SCSI
- * @brief header file for the storage disk file
- * @{
- */
-
-/** @defgroup USBD_SCSI_Exported_Defines
- * @{
- */
-
-#define SENSE_LIST_DEEPTH 4
-
-/* SCSI Commands */
-#define SCSI_FORMAT_UNIT 0x04
-#define SCSI_INQUIRY 0x12
-#define SCSI_MODE_SELECT6 0x15
-#define SCSI_MODE_SELECT10 0x55
-#define SCSI_MODE_SENSE6 0x1A
-#define SCSI_MODE_SENSE10 0x5A
-#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
-#define SCSI_SYNCHRONIZE_CACHE10 0x35
-#define SCSI_SYNCHRONIZE_CACHE16 0x91
-#define SCSI_READ6 0x08
-#define SCSI_READ10 0x28
-#define SCSI_READ12 0xA8
-#define SCSI_READ16 0x88
-
-#define SCSI_READ_CAPACITY10 0x25
-#define SCSI_READ_CAPACITY16 0x9E
-
-#define SCSI_REQUEST_SENSE 0x03
-#define SCSI_START_STOP_UNIT 0x1B
-#define SCSI_TEST_UNIT_READY 0x00
-#define SCSI_WRITE6 0x0A
-#define SCSI_WRITE10 0x2A
-#define SCSI_WRITE12 0xAA
-#define SCSI_WRITE16 0x8A
-
-#define SCSI_VERIFY10 0x2F
-#define SCSI_VERIFY12 0xAF
-#define SCSI_VERIFY16 0x8F
-
-#define SCSI_SEND_DIAGNOSTIC 0x1D
-#define SCSI_READ_FORMAT_CAPACITIES 0x23
-
-#define NO_SENSE 0
-#define RECOVERED_ERROR 1
-#define NOT_READY 2
-#define MEDIUM_ERROR 3
-#define HARDWARE_ERROR 4
-#define ILLEGAL_REQUEST 5
-#define UNIT_ATTENTION 6
-#define DATA_PROTECT 7
-#define BLANK_CHECK 8
-#define VENDOR_SPECIFIC 9
-#define COPY_ABORTED 10
-#define ABORTED_COMMAND 11
-#define VOLUME_OVERFLOW 13
-#define MISCOMPARE 14
-
-
-#define INVALID_CDB 0x20
-#define INVALID_FIELED_IN_COMMAND 0x24
-#define PARAMETER_LIST_LENGTH_ERROR 0x1A
-#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
-#define ADDRESS_OUT_OF_RANGE 0x21
-#define MEDIUM_NOT_PRESENT 0x3A
-#define MEDIUM_HAVE_CHANGED 0x28
-#define WRITE_PROTECTED 0x27
-#define UNRECOVERED_READ_ERROR 0x11
-#define WRITE_FAULT 0x03
-
-#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
-#define READ_CAPACITY10_DATA_LEN 0x08
-#define MODE_SENSE10_DATA_LEN 0x08
-#define MODE_SENSE6_DATA_LEN 0x04
-#define REQUEST_SENSE_DATA_LEN 0x12
-#define STANDARD_INQUIRY_DATA_LEN 0x24
-#define BLKVFY 0x04
-
-extern uint8_t Page00_Inquiry_Data[];
-extern uint8_t Standard_Inquiry_Data[];
-extern uint8_t Standard_Inquiry_Data2[];
-extern uint8_t Mode_Sense6_data[];
-extern uint8_t Mode_Sense10_data[];
-extern uint8_t Scsi_Sense_Data[];
-extern uint8_t ReadCapacity10_Data[];
-extern uint8_t ReadFormatCapacity_Data [];
-/**
- * @}
- */
-
-
-/** @defgroup USBD_SCSI_Exported_TypesDefinitions
- * @{
- */
-
-typedef struct _SENSE_ITEM {
- char Skey;
- union {
- struct _ASCs {
- char ASC;
- char ASCQ;
- }b;
- unsigned int ASC;
- char *pData;
- } w;
-} USBD_SCSI_SenseTypeDef;
-/**
- * @}
- */
-
-/** @defgroup USBD_SCSI_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_SCSI_Exported_Variables
- * @{
- */
-
-/**
- * @}
- */
-/** @defgroup USBD_SCSI_Exported_FunctionsPrototype
- * @{
- */
-int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev,
- uint8_t lun,
- uint8_t *cmd);
-
-void SCSI_SenseCode(USBD_HandleTypeDef *pdev,
- uint8_t lun,
- uint8_t sKey,
- uint8_t ASC);
-
-/**
- * @}
- */
-
-#endif /* __USBD_MSC_SCSI_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+ ******************************************************************************
+ * @file usbd_msc_scsi.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief header for the usbd_msc_scsi.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_MSC_SCSI_H
+#define __USBD_MSC_SCSI_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_SCSI
+ * @brief header file for the storage disk file
+ * @{
+ */
+
+/** @defgroup USBD_SCSI_Exported_Defines
+ * @{
+ */
+
+#define SENSE_LIST_DEEPTH 4
+
+/* SCSI Commands */
+#define SCSI_FORMAT_UNIT 0x04
+#define SCSI_INQUIRY 0x12
+#define SCSI_MODE_SELECT6 0x15
+#define SCSI_MODE_SELECT10 0x55
+#define SCSI_MODE_SENSE6 0x1A
+#define SCSI_MODE_SENSE10 0x5A
+#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
+#define SCSI_SYNCHRONIZE_CACHE10 0x35
+#define SCSI_SYNCHRONIZE_CACHE16 0x91
+#define SCSI_READ6 0x08
+#define SCSI_READ10 0x28
+#define SCSI_READ12 0xA8
+#define SCSI_READ16 0x88
+
+#define SCSI_READ_CAPACITY10 0x25
+#define SCSI_READ_CAPACITY16 0x9E
+
+#define SCSI_REQUEST_SENSE 0x03
+#define SCSI_START_STOP_UNIT 0x1B
+#define SCSI_TEST_UNIT_READY 0x00
+#define SCSI_WRITE6 0x0A
+#define SCSI_WRITE10 0x2A
+#define SCSI_WRITE12 0xAA
+#define SCSI_WRITE16 0x8A
+
+#define SCSI_VERIFY10 0x2F
+#define SCSI_VERIFY12 0xAF
+#define SCSI_VERIFY16 0x8F
+
+#define SCSI_SEND_DIAGNOSTIC 0x1D
+#define SCSI_READ_FORMAT_CAPACITIES 0x23
+
+#define NO_SENSE 0
+#define RECOVERED_ERROR 1
+#define NOT_READY 2
+#define MEDIUM_ERROR 3
+#define HARDWARE_ERROR 4
+#define ILLEGAL_REQUEST 5
+#define UNIT_ATTENTION 6
+#define DATA_PROTECT 7
+#define BLANK_CHECK 8
+#define VENDOR_SPECIFIC 9
+#define COPY_ABORTED 10
+#define ABORTED_COMMAND 11
+#define VOLUME_OVERFLOW 13
+#define MISCOMPARE 14
+
+
+#define INVALID_CDB 0x20
+#define INVALID_FIELED_IN_COMMAND 0x24
+#define PARAMETER_LIST_LENGTH_ERROR 0x1A
+#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
+#define ADDRESS_OUT_OF_RANGE 0x21
+#define MEDIUM_NOT_PRESENT 0x3A
+#define MEDIUM_HAVE_CHANGED 0x28
+#define WRITE_PROTECTED 0x27
+#define UNRECOVERED_READ_ERROR 0x11
+#define WRITE_FAULT 0x03
+
+#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
+#define READ_CAPACITY10_DATA_LEN 0x08
+#define MODE_SENSE10_DATA_LEN 0x08
+#define MODE_SENSE6_DATA_LEN 0x04
+#define REQUEST_SENSE_DATA_LEN 0x12
+#define STANDARD_INQUIRY_DATA_LEN 0x24
+#define BLKVFY 0x04
+
+extern uint8_t Page00_Inquiry_Data[];
+extern uint8_t Standard_Inquiry_Data[];
+extern uint8_t Standard_Inquiry_Data2[];
+extern uint8_t Mode_Sense6_data[];
+extern uint8_t Mode_Sense10_data[];
+extern uint8_t Scsi_Sense_Data[];
+extern uint8_t ReadCapacity10_Data[];
+extern uint8_t ReadFormatCapacity_Data [];
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_SCSI_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct _SENSE_ITEM {
+ char Skey;
+ union {
+ struct _ASCs {
+ char ASC;
+ char ASCQ;
+ }b;
+ unsigned int ASC;
+ char *pData;
+ } w;
+} USBD_SCSI_SenseTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup USBD_SCSI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_SCSI_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+/** @defgroup USBD_SCSI_Exported_FunctionsPrototype
+ * @{
+ */
+int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev,
+ uint8_t lun,
+ uint8_t *cmd);
+
+void SCSI_SenseCode(USBD_HandleTypeDef *pdev,
+ uint8_t lun,
+ uint8_t sKey,
+ uint8_t ASC);
+
+/**
+ * @}
+ */
+
+#endif /* __USBD_MSC_SCSI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/ports/stm32/usbdev/class/src/usbd_msc_bot.c b/ports/stm32/usbdev/class/src/usbd_msc_bot.c
index 2fccd9e082..d20f7a8dc0 100644
--- a/ports/stm32/usbdev/class/src/usbd_msc_bot.c
+++ b/ports/stm32/usbdev/class/src/usbd_msc_bot.c
@@ -1,407 +1,407 @@
-/**
- ******************************************************************************
- * @file usbd_msc_bot.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief This file provides all the BOT protocol core functions.
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_msc_bot.h"
-#include "usbd_msc_scsi.h"
-#include "usbd_cdc_msc_hid.h"
-#include "usbd_ioreq.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup MSC_BOT
- * @brief BOT protocol module
- * @{
- */
-
-/** @defgroup MSC_BOT_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_BOT_Private_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup MSC_BOT_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_BOT_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup MSC_BOT_Private_FunctionPrototypes
- * @{
- */
-static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev);
-
-static void MSC_BOT_SendData (USBD_HandleTypeDef *pdev,
- uint8_t* pbuf,
- uint16_t len);
-
-static void MSC_BOT_Abort(USBD_HandleTypeDef *pdev);
-/**
- * @}
- */
-
-
-/** @defgroup MSC_BOT_Private_Functions
- * @{
- */
-
-
-
-/**
-* @brief MSC_BOT_Init
-* Initialize the BOT Process
-* @param pdev: device instance
-* @retval None
-*/
-void MSC_BOT_Init (USBD_HandleTypeDef *pdev)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- hmsc->bot_state = USBD_BOT_IDLE;
- hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
-
- hmsc->scsi_sense_tail = 0;
- hmsc->scsi_sense_head = 0;
-
- hmsc->bdev_ops->Init(0);
-
- USBD_LL_FlushEP(pdev, MSC_OUT_EP);
- USBD_LL_FlushEP(pdev, MSC_IN_EP);
-
- /* Prapare EP to Receive First BOT Cmd */
- USBD_LL_PrepareReceive (pdev,
- MSC_OUT_EP,
- (uint8_t *)&hmsc->cbw,
- USBD_BOT_CBW_LENGTH);
-}
-
-/**
-* @brief MSC_BOT_Reset
-* Reset the BOT Machine
-* @param pdev: device instance
-* @retval None
-*/
-void MSC_BOT_Reset (USBD_HandleTypeDef *pdev)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- hmsc->bot_state = USBD_BOT_IDLE;
- hmsc->bot_status = USBD_BOT_STATUS_RECOVERY;
-
- /* Prapare EP to Receive First BOT Cmd */
- USBD_LL_PrepareReceive (pdev,
- MSC_OUT_EP,
- (uint8_t *)&hmsc->cbw,
- USBD_BOT_CBW_LENGTH);
-}
-
-/**
-* @brief MSC_BOT_DeInit
-* Uninitialize the BOT Machine
-* @param pdev: device instance
-* @retval None
-*/
-void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
- hmsc->bot_state = USBD_BOT_IDLE;
-}
-
-/**
-* @brief MSC_BOT_DataIn
-* Handle BOT IN data stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval None
-*/
-void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
- uint8_t epnum)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- switch (hmsc->bot_state)
- {
- case USBD_BOT_DATA_IN:
- if(SCSI_ProcessCmd(pdev,
- hmsc->cbw.bLUN,
- &hmsc->cbw.CB[0]) < 0)
- {
- MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
- }
- break;
-
- case USBD_BOT_SEND_DATA:
- case USBD_BOT_LAST_DATA_IN:
- MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_PASSED);
-
- break;
-
- default:
- break;
- }
-}
-/**
-* @brief MSC_BOT_DataOut
-* Proccess MSC OUT data
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval None
-*/
-void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
- uint8_t epnum)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- switch (hmsc->bot_state)
- {
- case USBD_BOT_IDLE:
- MSC_BOT_CBW_Decode(pdev);
- break;
-
- case USBD_BOT_DATA_OUT:
-
- if(SCSI_ProcessCmd(pdev,
- hmsc->cbw.bLUN,
- &hmsc->cbw.CB[0]) < 0)
- {
- MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
- }
-
- break;
-
- default:
- break;
- }
-}
-
-/**
-* @brief MSC_BOT_CBW_Decode
-* Decode the CBW command and set the BOT state machine accordingtly
-* @param pdev: device instance
-* @retval None
-*/
-static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- hmsc->csw.dTag = hmsc->cbw.dTag;
- hmsc->csw.dDataResidue = hmsc->cbw.dDataLength;
-
- if ((USBD_LL_GetRxDataSize (pdev ,MSC_OUT_EP) != USBD_BOT_CBW_LENGTH) ||
- (hmsc->cbw.dSignature != USBD_BOT_CBW_SIGNATURE)||
- (hmsc->cbw.bLUN > 1) ||
- (hmsc->cbw.bCBLength < 1) ||
- (hmsc->cbw.bCBLength > 16))
- {
-
- SCSI_SenseCode(pdev,
- hmsc->cbw.bLUN,
- ILLEGAL_REQUEST,
- INVALID_CDB);
-
- hmsc->bot_status = USBD_BOT_STATUS_ERROR;
- MSC_BOT_Abort(pdev);
-
- }
- else
- {
- if(SCSI_ProcessCmd(pdev,
- hmsc->cbw.bLUN,
- &hmsc->cbw.CB[0]) < 0)
- {
- if(hmsc->bot_state == USBD_BOT_NO_DATA)
- {
- MSC_BOT_SendCSW (pdev,
- USBD_CSW_CMD_FAILED);
- }
- else
- {
- MSC_BOT_Abort(pdev);
- }
- }
- /*Burst xfer handled internally*/
- else if ((hmsc->bot_state != USBD_BOT_DATA_IN) &&
- (hmsc->bot_state != USBD_BOT_DATA_OUT) &&
- (hmsc->bot_state != USBD_BOT_LAST_DATA_IN))
- {
- if (hmsc->bot_data_length > 0)
- {
- MSC_BOT_SendData(pdev,
- hmsc->bot_data,
- hmsc->bot_data_length);
- }
- else if (hmsc->bot_data_length == 0)
- {
- MSC_BOT_SendCSW (pdev,
- USBD_CSW_CMD_PASSED);
- }
- }
- }
-}
-
-/**
-* @brief MSC_BOT_SendData
-* Send the requested data
-* @param pdev: device instance
-* @param buf: pointer to data buffer
-* @param len: Data Length
-* @retval None
-*/
-static void MSC_BOT_SendData(USBD_HandleTypeDef *pdev,
- uint8_t* buf,
- uint16_t len)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- len = MIN (hmsc->cbw.dDataLength, len);
- hmsc->csw.dDataResidue -= len;
- hmsc->csw.bStatus = USBD_CSW_CMD_PASSED;
- hmsc->bot_state = USBD_BOT_SEND_DATA;
-
- USBD_LL_Transmit (pdev, MSC_IN_EP, buf, len);
-}
-
-/**
-* @brief MSC_BOT_SendCSW
-* Send the Command Status Wrapper
-* @param pdev: device instance
-* @param status : CSW status
-* @retval None
-*/
-void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
- uint8_t CSW_Status)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- hmsc->csw.dSignature = USBD_BOT_CSW_SIGNATURE;
- hmsc->csw.bStatus = CSW_Status;
- hmsc->bot_state = USBD_BOT_IDLE;
-
- USBD_LL_Transmit (pdev,
- MSC_IN_EP,
- (uint8_t *)&hmsc->csw,
- USBD_BOT_CSW_LENGTH);
-
- /* Prapare EP to Receive next Cmd */
- USBD_LL_PrepareReceive (pdev,
- MSC_OUT_EP,
- (uint8_t *)&hmsc->cbw,
- USBD_BOT_CBW_LENGTH);
-
-}
-
-/**
-* @brief MSC_BOT_Abort
-* Abort the current transfer
-* @param pdev: device instance
-* @retval status
-*/
-
-static void MSC_BOT_Abort (USBD_HandleTypeDef *pdev)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if ((hmsc->cbw.bmFlags == 0) &&
- (hmsc->cbw.dDataLength != 0) &&
- (hmsc->bot_status == USBD_BOT_STATUS_NORMAL) )
- {
- USBD_LL_StallEP(pdev, MSC_OUT_EP );
- }
- USBD_LL_StallEP(pdev, MSC_IN_EP);
-
- if(hmsc->bot_status == USBD_BOT_STATUS_ERROR)
- {
- USBD_LL_PrepareReceive (pdev,
- MSC_OUT_EP,
- (uint8_t *)&hmsc->cbw,
- USBD_BOT_CBW_LENGTH);
- }
-}
-
-/**
-* @brief MSC_BOT_CplClrFeature
-* Complete the clear feature request
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval None
-*/
-
-void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev, uint8_t epnum)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if(hmsc->bot_status == USBD_BOT_STATUS_ERROR )/* Bad CBW Signature */
- {
- USBD_LL_StallEP(pdev, MSC_IN_EP);
- hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
- }
- else if(((epnum & 0x80) == 0x80) && ( hmsc->bot_status != USBD_BOT_STATUS_RECOVERY))
- {
- MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
- }
-
-}
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_msc_bot.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief This file provides all the BOT protocol core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_msc_bot.h"
+#include "usbd_msc_scsi.h"
+#include "usbd_cdc_msc_hid.h"
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup MSC_BOT
+ * @brief BOT protocol module
+ * @{
+ */
+
+/** @defgroup MSC_BOT_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_BOT_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_BOT_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_BOT_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_BOT_Private_FunctionPrototypes
+ * @{
+ */
+static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev);
+
+static void MSC_BOT_SendData (USBD_HandleTypeDef *pdev,
+ uint8_t* pbuf,
+ uint16_t len);
+
+static void MSC_BOT_Abort(USBD_HandleTypeDef *pdev);
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_BOT_Private_Functions
+ * @{
+ */
+
+
+
+/**
+* @brief MSC_BOT_Init
+* Initialize the BOT Process
+* @param pdev: device instance
+* @retval None
+*/
+void MSC_BOT_Init (USBD_HandleTypeDef *pdev)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ hmsc->bot_state = USBD_BOT_IDLE;
+ hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
+
+ hmsc->scsi_sense_tail = 0;
+ hmsc->scsi_sense_head = 0;
+
+ hmsc->bdev_ops->Init(0);
+
+ USBD_LL_FlushEP(pdev, MSC_OUT_EP);
+ USBD_LL_FlushEP(pdev, MSC_IN_EP);
+
+ /* Prapare EP to Receive First BOT Cmd */
+ USBD_LL_PrepareReceive (pdev,
+ MSC_OUT_EP,
+ (uint8_t *)&hmsc->cbw,
+ USBD_BOT_CBW_LENGTH);
+}
+
+/**
+* @brief MSC_BOT_Reset
+* Reset the BOT Machine
+* @param pdev: device instance
+* @retval None
+*/
+void MSC_BOT_Reset (USBD_HandleTypeDef *pdev)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ hmsc->bot_state = USBD_BOT_IDLE;
+ hmsc->bot_status = USBD_BOT_STATUS_RECOVERY;
+
+ /* Prapare EP to Receive First BOT Cmd */
+ USBD_LL_PrepareReceive (pdev,
+ MSC_OUT_EP,
+ (uint8_t *)&hmsc->cbw,
+ USBD_BOT_CBW_LENGTH);
+}
+
+/**
+* @brief MSC_BOT_DeInit
+* Uninitialize the BOT Machine
+* @param pdev: device instance
+* @retval None
+*/
+void MSC_BOT_DeInit (USBD_HandleTypeDef *pdev)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+ hmsc->bot_state = USBD_BOT_IDLE;
+}
+
+/**
+* @brief MSC_BOT_DataIn
+* Handle BOT IN data stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval None
+*/
+void MSC_BOT_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ switch (hmsc->bot_state)
+ {
+ case USBD_BOT_DATA_IN:
+ if(SCSI_ProcessCmd(pdev,
+ hmsc->cbw.bLUN,
+ &hmsc->cbw.CB[0]) < 0)
+ {
+ MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
+ }
+ break;
+
+ case USBD_BOT_SEND_DATA:
+ case USBD_BOT_LAST_DATA_IN:
+ MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_PASSED);
+
+ break;
+
+ default:
+ break;
+ }
+}
+/**
+* @brief MSC_BOT_DataOut
+* Proccess MSC OUT data
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval None
+*/
+void MSC_BOT_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ switch (hmsc->bot_state)
+ {
+ case USBD_BOT_IDLE:
+ MSC_BOT_CBW_Decode(pdev);
+ break;
+
+ case USBD_BOT_DATA_OUT:
+
+ if(SCSI_ProcessCmd(pdev,
+ hmsc->cbw.bLUN,
+ &hmsc->cbw.CB[0]) < 0)
+ {
+ MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
+ }
+
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+* @brief MSC_BOT_CBW_Decode
+* Decode the CBW command and set the BOT state machine accordingtly
+* @param pdev: device instance
+* @retval None
+*/
+static void MSC_BOT_CBW_Decode (USBD_HandleTypeDef *pdev)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ hmsc->csw.dTag = hmsc->cbw.dTag;
+ hmsc->csw.dDataResidue = hmsc->cbw.dDataLength;
+
+ if ((USBD_LL_GetRxDataSize (pdev ,MSC_OUT_EP) != USBD_BOT_CBW_LENGTH) ||
+ (hmsc->cbw.dSignature != USBD_BOT_CBW_SIGNATURE)||
+ (hmsc->cbw.bLUN > 1) ||
+ (hmsc->cbw.bCBLength < 1) ||
+ (hmsc->cbw.bCBLength > 16))
+ {
+
+ SCSI_SenseCode(pdev,
+ hmsc->cbw.bLUN,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+
+ hmsc->bot_status = USBD_BOT_STATUS_ERROR;
+ MSC_BOT_Abort(pdev);
+
+ }
+ else
+ {
+ if(SCSI_ProcessCmd(pdev,
+ hmsc->cbw.bLUN,
+ &hmsc->cbw.CB[0]) < 0)
+ {
+ if(hmsc->bot_state == USBD_BOT_NO_DATA)
+ {
+ MSC_BOT_SendCSW (pdev,
+ USBD_CSW_CMD_FAILED);
+ }
+ else
+ {
+ MSC_BOT_Abort(pdev);
+ }
+ }
+ /*Burst xfer handled internally*/
+ else if ((hmsc->bot_state != USBD_BOT_DATA_IN) &&
+ (hmsc->bot_state != USBD_BOT_DATA_OUT) &&
+ (hmsc->bot_state != USBD_BOT_LAST_DATA_IN))
+ {
+ if (hmsc->bot_data_length > 0)
+ {
+ MSC_BOT_SendData(pdev,
+ hmsc->bot_data,
+ hmsc->bot_data_length);
+ }
+ else if (hmsc->bot_data_length == 0)
+ {
+ MSC_BOT_SendCSW (pdev,
+ USBD_CSW_CMD_PASSED);
+ }
+ }
+ }
+}
+
+/**
+* @brief MSC_BOT_SendData
+* Send the requested data
+* @param pdev: device instance
+* @param buf: pointer to data buffer
+* @param len: Data Length
+* @retval None
+*/
+static void MSC_BOT_SendData(USBD_HandleTypeDef *pdev,
+ uint8_t* buf,
+ uint16_t len)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ len = MIN (hmsc->cbw.dDataLength, len);
+ hmsc->csw.dDataResidue -= len;
+ hmsc->csw.bStatus = USBD_CSW_CMD_PASSED;
+ hmsc->bot_state = USBD_BOT_SEND_DATA;
+
+ USBD_LL_Transmit (pdev, MSC_IN_EP, buf, len);
+}
+
+/**
+* @brief MSC_BOT_SendCSW
+* Send the Command Status Wrapper
+* @param pdev: device instance
+* @param status : CSW status
+* @retval None
+*/
+void MSC_BOT_SendCSW (USBD_HandleTypeDef *pdev,
+ uint8_t CSW_Status)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ hmsc->csw.dSignature = USBD_BOT_CSW_SIGNATURE;
+ hmsc->csw.bStatus = CSW_Status;
+ hmsc->bot_state = USBD_BOT_IDLE;
+
+ USBD_LL_Transmit (pdev,
+ MSC_IN_EP,
+ (uint8_t *)&hmsc->csw,
+ USBD_BOT_CSW_LENGTH);
+
+ /* Prapare EP to Receive next Cmd */
+ USBD_LL_PrepareReceive (pdev,
+ MSC_OUT_EP,
+ (uint8_t *)&hmsc->cbw,
+ USBD_BOT_CBW_LENGTH);
+
+}
+
+/**
+* @brief MSC_BOT_Abort
+* Abort the current transfer
+* @param pdev: device instance
+* @retval status
+*/
+
+static void MSC_BOT_Abort (USBD_HandleTypeDef *pdev)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if ((hmsc->cbw.bmFlags == 0) &&
+ (hmsc->cbw.dDataLength != 0) &&
+ (hmsc->bot_status == USBD_BOT_STATUS_NORMAL) )
+ {
+ USBD_LL_StallEP(pdev, MSC_OUT_EP );
+ }
+ USBD_LL_StallEP(pdev, MSC_IN_EP);
+
+ if(hmsc->bot_status == USBD_BOT_STATUS_ERROR)
+ {
+ USBD_LL_PrepareReceive (pdev,
+ MSC_OUT_EP,
+ (uint8_t *)&hmsc->cbw,
+ USBD_BOT_CBW_LENGTH);
+ }
+}
+
+/**
+* @brief MSC_BOT_CplClrFeature
+* Complete the clear feature request
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval None
+*/
+
+void MSC_BOT_CplClrFeature (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if(hmsc->bot_status == USBD_BOT_STATUS_ERROR )/* Bad CBW Signature */
+ {
+ USBD_LL_StallEP(pdev, MSC_IN_EP);
+ hmsc->bot_status = USBD_BOT_STATUS_NORMAL;
+ }
+ else if(((epnum & 0x80) == 0x80) && ( hmsc->bot_status != USBD_BOT_STATUS_RECOVERY))
+ {
+ MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_FAILED);
+ }
+
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/class/src/usbd_msc_data.c b/ports/stm32/usbdev/class/src/usbd_msc_data.c
index 4d72bd5fce..96740a3a4f 100644
--- a/ports/stm32/usbdev/class/src/usbd_msc_data.c
+++ b/ports/stm32/usbdev/class/src/usbd_msc_data.c
@@ -1,134 +1,134 @@
-/**
- ******************************************************************************
- * @file usbd_msc_data.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief This file provides all the vital inquiry pages and sense data.
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_msc_data.h"
-
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup MSC_DATA
- * @brief Mass storage info/data module
- * @{
- */
-
-/** @defgroup MSC_DATA_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_DATA_Private_Defines
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_DATA_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_DATA_Private_Variables
- * @{
- */
-
-
-/* USB Mass storage Page 0 Inquiry Data */
-const uint8_t MSC_Page00_Inquiry_Data[] = {//7
- 0x00,
- 0x00,
- 0x00,
- (LENGTH_INQUIRY_PAGE00 - 4),
- 0x00,
- 0x80,
- 0x83
-};
-/* USB Mass storage sense 6 Data */
-const uint8_t MSC_Mode_Sense6_data[] = {
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x00
-};
-/* USB Mass storage sense 10 Data */
-const uint8_t MSC_Mode_Sense10_data[] = {
- 0x00,
- 0x06,
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x00,
- 0x00
-};
-/**
- * @}
- */
-
-
-/** @defgroup MSC_DATA_Private_FunctionPrototypes
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_DATA_Private_Functions
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_msc_data.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief This file provides all the vital inquiry pages and sense data.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_msc_data.h"
+
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup MSC_DATA
+ * @brief Mass storage info/data module
+ * @{
+ */
+
+/** @defgroup MSC_DATA_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_DATA_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_DATA_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_DATA_Private_Variables
+ * @{
+ */
+
+
+/* USB Mass storage Page 0 Inquiry Data */
+const uint8_t MSC_Page00_Inquiry_Data[] = {//7
+ 0x00,
+ 0x00,
+ 0x00,
+ (LENGTH_INQUIRY_PAGE00 - 4),
+ 0x00,
+ 0x80,
+ 0x83
+};
+/* USB Mass storage sense 6 Data */
+const uint8_t MSC_Mode_Sense6_data[] = {
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00
+};
+/* USB Mass storage sense 10 Data */
+const uint8_t MSC_Mode_Sense10_data[] = {
+ 0x00,
+ 0x06,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00
+};
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_DATA_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_DATA_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/class/src/usbd_msc_scsi.c b/ports/stm32/usbdev/class/src/usbd_msc_scsi.c
index b5363e2d4b..9da9033771 100644
--- a/ports/stm32/usbdev/class/src/usbd_msc_scsi.c
+++ b/ports/stm32/usbdev/class/src/usbd_msc_scsi.c
@@ -1,811 +1,811 @@
-/**
- ******************************************************************************
- * @file usbd_msc_scsi.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief This file provides all the USBD SCSI layer functions.
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_msc_bot.h"
-#include "usbd_msc_scsi.h"
-#include "usbd_msc_data.h"
-#include "usbd_cdc_msc_hid.h"
-
-
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup MSC_SCSI
- * @brief Mass storage SCSI layer module
- * @{
- */
-
-/** @defgroup MSC_SCSI_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_SCSI_Private_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup MSC_SCSI_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup MSC_SCSI_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup MSC_SCSI_Private_FunctionPrototypes
- * @{
- */
-static int8_t SCSI_TestUnitReady(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_Inquiry(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_ReadFormatCapacity(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_ReadCapacity10(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_RequestSense (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_StartStopUnit(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_AllowMediumRemoval(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_ModeSense6 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_ModeSense10 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_SynchronizeCache(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_Write10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params);
-static int8_t SCSI_Read10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params);
-static int8_t SCSI_Verify10(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
-static int8_t SCSI_CheckAddressRange (USBD_HandleTypeDef *pdev,
- uint8_t lun ,
- uint32_t blk_offset ,
- uint16_t blk_nbr);
-static int8_t SCSI_ProcessRead (USBD_HandleTypeDef *pdev,
- uint8_t lun);
-
-static int8_t SCSI_ProcessWrite (USBD_HandleTypeDef *pdev,
- uint8_t lun);
-/**
- * @}
- */
-
-
-/** @defgroup MSC_SCSI_Private_Functions
- * @{
- */
-
-
-/**
-* @brief SCSI_ProcessCmd
-* Process SCSI commands
-* @param pdev: device instance
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev,
- uint8_t lun,
- uint8_t *params)
-{
- /*
- if (params[0] != SCSI_READ10 && params[0] != SCSI_WRITE10) {
- printf("SCSI_ProcessCmd(lun=%d, params=%x, %x)\n", lun, params[0], params[1]);
- }
- */
-
- switch (params[0])
- {
- case SCSI_TEST_UNIT_READY:
- return SCSI_TestUnitReady(pdev, lun, params);
-
- case SCSI_REQUEST_SENSE:
- return SCSI_RequestSense (pdev, lun, params);
- case SCSI_INQUIRY:
- return SCSI_Inquiry(pdev, lun, params);
-
- case SCSI_START_STOP_UNIT:
- return SCSI_StartStopUnit(pdev, lun, params);
-
- case SCSI_ALLOW_MEDIUM_REMOVAL:
- return SCSI_AllowMediumRemoval(pdev, lun, params);
-
- case SCSI_MODE_SENSE6:
- return SCSI_ModeSense6 (pdev, lun, params);
-
- case SCSI_MODE_SENSE10:
- return SCSI_ModeSense10 (pdev, lun, params);
-
- case SCSI_SYNCHRONIZE_CACHE10:
- case SCSI_SYNCHRONIZE_CACHE16:
- return SCSI_SynchronizeCache(pdev, lun, params);
-
- case SCSI_READ_FORMAT_CAPACITIES:
- return SCSI_ReadFormatCapacity(pdev, lun, params);
-
- case SCSI_READ_CAPACITY10:
- return SCSI_ReadCapacity10(pdev, lun, params);
-
- case SCSI_READ10:
- return SCSI_Read10(pdev, lun, params);
-
- case SCSI_WRITE10:
- return SCSI_Write10(pdev, lun, params);
-
- case SCSI_VERIFY10:
- return SCSI_Verify10(pdev, lun, params);
-
- default:
- SCSI_SenseCode(pdev,
- lun,
- ILLEGAL_REQUEST,
- INVALID_CDB);
- return -1;
- }
-}
-
-
-/**
-* @brief SCSI_TestUnitReady
-* Process SCSI Test Unit Ready Command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_TestUnitReady(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- /* case 9 : Hi > D0 */
- if (hmsc->cbw.dDataLength != 0)
- {
- SCSI_SenseCode(pdev,
- hmsc->cbw.bLUN,
- ILLEGAL_REQUEST,
- INVALID_CDB);
- return -1;
- }
-
- if(hmsc->bdev_ops->IsReady(lun) !=0 )
- {
- SCSI_SenseCode(pdev,
- lun,
- NOT_READY,
- MEDIUM_NOT_PRESENT);
-
- hmsc->bot_state = USBD_BOT_NO_DATA;
- return -1;
- }
- hmsc->bot_data_length = 0;
- return 0;
-}
-
-/**
-* @brief SCSI_Inquiry
-* Process Inquiry command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_Inquiry(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- uint8_t* pPage;
- uint16_t len;
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if (params[1] & 0x01)/*Evpd is set*/
- {
- pPage = (uint8_t *)MSC_Page00_Inquiry_Data;
- len = LENGTH_INQUIRY_PAGE00;
- }
- else
- {
-
- pPage = (uint8_t *)&hmsc->bdev_ops->pInquiry[lun * STANDARD_INQUIRY_DATA_LEN];
- len = pPage[4] + 5;
-
- if (params[4] <= len)
- {
- len = params[4];
- }
- }
- hmsc->bot_data_length = len;
-
- while (len)
- {
- len--;
- hmsc->bot_data[len] = pPage[len];
- }
- return 0;
-}
-
-/**
-* @brief SCSI_ReadCapacity10
-* Process Read Capacity 10 command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_ReadCapacity10(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if(hmsc->bdev_ops->GetCapacity(lun, &hmsc->scsi_blk_nbr, &hmsc->scsi_blk_size) != 0)
- {
- SCSI_SenseCode(pdev,
- lun,
- NOT_READY,
- MEDIUM_NOT_PRESENT);
- return -1;
- }
- else
- {
-
- hmsc->bot_data[0] = (uint8_t)((hmsc->scsi_blk_nbr - 1) >> 24);
- hmsc->bot_data[1] = (uint8_t)((hmsc->scsi_blk_nbr - 1) >> 16);
- hmsc->bot_data[2] = (uint8_t)((hmsc->scsi_blk_nbr - 1) >> 8);
- hmsc->bot_data[3] = (uint8_t)(hmsc->scsi_blk_nbr - 1);
-
- hmsc->bot_data[4] = (uint8_t)(hmsc->scsi_blk_size >> 24);
- hmsc->bot_data[5] = (uint8_t)(hmsc->scsi_blk_size >> 16);
- hmsc->bot_data[6] = (uint8_t)(hmsc->scsi_blk_size >> 8);
- hmsc->bot_data[7] = (uint8_t)(hmsc->scsi_blk_size);
-
- hmsc->bot_data_length = 8;
- return 0;
- }
-}
-/**
-* @brief SCSI_ReadFormatCapacity
-* Process Read Format Capacity command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_ReadFormatCapacity(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- uint16_t blk_size;
- uint32_t blk_nbr;
- uint16_t i;
-
- for(i=0 ; i < 12 ; i++)
- {
- hmsc->bot_data[i] = 0;
- }
-
- if(hmsc->bdev_ops->GetCapacity(lun, &blk_nbr, &blk_size) != 0)
- {
- SCSI_SenseCode(pdev,
- lun,
- NOT_READY,
- MEDIUM_NOT_PRESENT);
- return -1;
- }
- else
- {
- hmsc->bot_data[3] = 0x08;
- hmsc->bot_data[4] = (uint8_t)((blk_nbr - 1) >> 24);
- hmsc->bot_data[5] = (uint8_t)((blk_nbr - 1) >> 16);
- hmsc->bot_data[6] = (uint8_t)((blk_nbr - 1) >> 8);
- hmsc->bot_data[7] = (uint8_t)(blk_nbr - 1);
-
- hmsc->bot_data[8] = 0x02;
- hmsc->bot_data[9] = (uint8_t)(blk_size >> 16);
- hmsc->bot_data[10] = (uint8_t)(blk_size >> 8);
- hmsc->bot_data[11] = (uint8_t)(blk_size);
-
- hmsc->bot_data_length = 12;
- return 0;
- }
-}
-/**
-* @brief SCSI_ModeSense6
-* Process Mode Sense6 command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_ModeSense6 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
- uint16_t len = 8 ;
- hmsc->bot_data_length = len;
-
- while (len)
- {
- len--;
- hmsc->bot_data[len] = MSC_Mode_Sense6_data[len];
- }
- return 0;
-}
-
-/**
-* @brief SCSI_ModeSense10
-* Process Mode Sense10 command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_ModeSense10 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- uint16_t len = 8;
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- hmsc->bot_data_length = len;
-
- while (len)
- {
- len--;
- hmsc->bot_data[len] = MSC_Mode_Sense10_data[len];
- }
- return 0;
-}
-
-static int8_t SCSI_SynchronizeCache(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params) {
- // nothing to synchronize, so just return "success"
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
- hmsc->bot_data_length = 0;
- return 0;
-}
-
-/**
-* @brief SCSI_RequestSense
-* Process Request Sense command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-
-static int8_t SCSI_RequestSense (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- uint8_t i;
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- for(i=0 ; i < REQUEST_SENSE_DATA_LEN ; i++)
- {
- hmsc->bot_data[i] = 0;
- }
-
- hmsc->bot_data[0] = 0x70;
- hmsc->bot_data[7] = REQUEST_SENSE_DATA_LEN - 6;
-
- if((hmsc->scsi_sense_head != hmsc->scsi_sense_tail)) {
-
- hmsc->bot_data[2] = hmsc->scsi_sense[hmsc->scsi_sense_head].Skey;
- hmsc->bot_data[12] = hmsc->scsi_sense[hmsc->scsi_sense_head].w.b.ASCQ;
- hmsc->bot_data[13] = hmsc->scsi_sense[hmsc->scsi_sense_head].w.b.ASC;
- hmsc->scsi_sense_head++;
-
- if (hmsc->scsi_sense_head == SENSE_LIST_DEEPTH)
- {
- hmsc->scsi_sense_head = 0;
- }
- }
- hmsc->bot_data_length = REQUEST_SENSE_DATA_LEN;
-
- if (params[4] <= REQUEST_SENSE_DATA_LEN)
- {
- hmsc->bot_data_length = params[4];
- }
- return 0;
-}
-
-/**
-* @brief SCSI_SenseCode
-* Load the last error code in the error list
-* @param lun: Logical unit number
-* @param sKey: Sense Key
-* @param ASC: Additional Sense Key
-* @retval none
-
-*/
-void SCSI_SenseCode(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t sKey, uint8_t ASC)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- hmsc->scsi_sense[hmsc->scsi_sense_tail].Skey = sKey;
- hmsc->scsi_sense[hmsc->scsi_sense_tail].w.ASC = ASC << 8;
- hmsc->scsi_sense_tail++;
- if (hmsc->scsi_sense_tail == SENSE_LIST_DEEPTH)
- {
- hmsc->scsi_sense_tail = 0;
- }
-}
-/**
-* @brief SCSI_StartStopUnit
-* Process Start Stop Unit command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_StartStopUnit(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
- hmsc->bot_data_length = 0;
-
- // On Mac OS X, when the device is ejected a SCSI_START_STOP_UNIT command is sent.
- // Bit 0 of params[4] is the START bit.
- // If we get a stop, we must really stop the device so that the Mac does not
- // automatically remount it.
- hmsc->bdev_ops->StartStopUnit(lun, params[4] & 1);
-
- return 0;
-}
-
-/**
-* @brief SCSI_AllowMediumRemoval
-* Process Allow Medium Removal command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_AllowMediumRemoval(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
- hmsc->bot_data_length = 0;
- hmsc->bdev_ops->PreventAllowMediumRemoval(lun, params[4]);
- return 0;
-}
-
-/**
-* @brief SCSI_Read10
-* Process Read10 command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-static int8_t SCSI_Read10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if(hmsc->bot_state == USBD_BOT_IDLE) /* Idle */
- {
-
- /* case 10 : Ho <> Di */
-
- if ((hmsc->cbw.bmFlags & 0x80) != 0x80)
- {
- SCSI_SenseCode(pdev,
- hmsc->cbw.bLUN,
- ILLEGAL_REQUEST,
- INVALID_CDB);
- return -1;
- }
-
- if(hmsc->bdev_ops->IsReady(lun) !=0 )
- {
- SCSI_SenseCode(pdev,
- lun,
- NOT_READY,
- MEDIUM_NOT_PRESENT);
- return -1;
- }
-
- hmsc->scsi_blk_addr_in_blks = (params[2] << 24) | \
- (params[3] << 16) | \
- (params[4] << 8) | \
- params[5];
-
- hmsc->scsi_blk_len = (params[7] << 8) | \
- params[8];
-
-
-
- if( SCSI_CheckAddressRange(pdev, lun, hmsc->scsi_blk_addr_in_blks, hmsc->scsi_blk_len) < 0)
- {
- return -1; /* error */
- }
-
- hmsc->bot_state = USBD_BOT_DATA_IN;
- hmsc->scsi_blk_len *= hmsc->scsi_blk_size;
-
- /* cases 4,5 : Hi <> Dn */
- if (hmsc->cbw.dDataLength != hmsc->scsi_blk_len)
- {
- SCSI_SenseCode(pdev,
- hmsc->cbw.bLUN,
- ILLEGAL_REQUEST,
- INVALID_CDB);
- return -1;
- }
- }
- hmsc->bot_data_length = MSC_MEDIA_PACKET;
-
- return SCSI_ProcessRead(pdev, lun);
-}
-
-/**
-* @brief SCSI_Write10
-* Process Write10 command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-
-static int8_t SCSI_Write10 (USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if (hmsc->bot_state == USBD_BOT_IDLE) /* Idle */
- {
-
- /* case 8 : Hi <> Do */
-
- if ((hmsc->cbw.bmFlags & 0x80) == 0x80)
- {
- SCSI_SenseCode(pdev,
- hmsc->cbw.bLUN,
- ILLEGAL_REQUEST,
- INVALID_CDB);
- return -1;
- }
-
- /* Check whether Media is ready */
- if(hmsc->bdev_ops->IsReady(lun) !=0 )
- {
- SCSI_SenseCode(pdev,
- lun,
- NOT_READY,
- MEDIUM_NOT_PRESENT);
- return -1;
- }
-
- /* Check If media is write-protected */
- if(hmsc->bdev_ops->IsWriteProtected(lun) !=0 )
- {
- SCSI_SenseCode(pdev,
- lun,
- NOT_READY,
- WRITE_PROTECTED);
- return -1;
- }
-
-
- hmsc->scsi_blk_addr_in_blks = (params[2] << 24) | \
- (params[3] << 16) | \
- (params[4] << 8) | \
- params[5];
- hmsc->scsi_blk_len = (params[7] << 8) | \
- params[8];
-
- /* check if LBA address is in the right range */
- if(SCSI_CheckAddressRange(pdev,
- lun,
- hmsc->scsi_blk_addr_in_blks,
- hmsc->scsi_blk_len) < 0)
- {
- return -1; /* error */
- }
-
- hmsc->scsi_blk_len *= hmsc->scsi_blk_size;
-
- /* cases 3,11,13 : Hn,Ho <> D0 */
- if (hmsc->cbw.dDataLength != hmsc->scsi_blk_len)
- {
- SCSI_SenseCode(pdev,
- hmsc->cbw.bLUN,
- ILLEGAL_REQUEST,
- INVALID_CDB);
- return -1;
- }
-
- /* Prepare EP to receive first data packet */
- hmsc->bot_state = USBD_BOT_DATA_OUT;
- USBD_LL_PrepareReceive (pdev,
- MSC_OUT_EP,
- hmsc->bot_data,
- MIN (hmsc->scsi_blk_len, MSC_MEDIA_PACKET));
- }
- else /* Write Process ongoing */
- {
- return SCSI_ProcessWrite(pdev, lun);
- }
- return 0;
-}
-
-
-/**
-* @brief SCSI_Verify10
-* Process Verify10 command
-* @param lun: Logical unit number
-* @param params: Command parameters
-* @retval status
-*/
-
-static int8_t SCSI_Verify10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if ((params[1]& 0x02) == 0x02)
- {
- SCSI_SenseCode (pdev,
- lun,
- ILLEGAL_REQUEST,
- INVALID_FIELED_IN_COMMAND);
- return -1; /* Error, Verify Mode Not supported*/
- }
-
- hmsc->scsi_blk_addr_in_blks = (params[2] << 24) | (params[3] << 16) | (params[4] << 8) | params[5];
- hmsc->scsi_blk_len = (params[7] << 8) | params[8];
-
- if(SCSI_CheckAddressRange(pdev,
- lun,
- hmsc->scsi_blk_addr_in_blks,
- hmsc->scsi_blk_len) < 0)
- {
- return -1; /* error */
- }
- hmsc->bot_data_length = 0;
- return 0;
-}
-
-/**
-* @brief SCSI_CheckAddressRange
-* Check address range
-* @param lun: Logical unit number
-* @param blk_offset: first block address
-* @param blk_nbr: number of block to be processed
-* @retval status
-*/
-static int8_t SCSI_CheckAddressRange (USBD_HandleTypeDef *pdev, uint8_t lun , uint32_t blk_offset , uint16_t blk_nbr)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- if ((blk_offset + blk_nbr) > hmsc->scsi_blk_nbr )
- {
- SCSI_SenseCode(pdev,
- lun,
- ILLEGAL_REQUEST,
- ADDRESS_OUT_OF_RANGE);
- return -1;
- }
- return 0;
-}
-
-/**
-* @brief SCSI_ProcessRead
-* Handle Read Process
-* @param lun: Logical unit number
-* @retval status
-*/
-static int8_t SCSI_ProcessRead (USBD_HandleTypeDef *pdev, uint8_t lun)
-{
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
- uint32_t len;
-
- len = MIN(hmsc->scsi_blk_len , MSC_MEDIA_PACKET);
-
- if( hmsc->bdev_ops->Read(lun ,
- hmsc->bot_data,
- hmsc->scsi_blk_addr_in_blks,
- len / hmsc->scsi_blk_size) < 0)
- {
-
- SCSI_SenseCode(pdev,
- lun,
- HARDWARE_ERROR,
- UNRECOVERED_READ_ERROR);
- return -1;
- }
-
-
- USBD_LL_Transmit (pdev,
- MSC_IN_EP,
- hmsc->bot_data,
- len);
-
-
- hmsc->scsi_blk_addr_in_blks += len / hmsc->scsi_blk_size;
- hmsc->scsi_blk_len -= len;
-
- /* case 6 : Hi = Di */
- hmsc->csw.dDataResidue -= len;
-
- if (hmsc->scsi_blk_len == 0)
- {
- hmsc->bot_state = USBD_BOT_LAST_DATA_IN;
- }
- return 0;
-}
-
-/**
-* @brief SCSI_ProcessWrite
-* Handle Write Process
-* @param lun: Logical unit number
-* @retval status
-*/
-
-static int8_t SCSI_ProcessWrite (USBD_HandleTypeDef *pdev, uint8_t lun)
-{
- uint32_t len;
- USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
-
- len = MIN(hmsc->scsi_blk_len , MSC_MEDIA_PACKET);
-
- if(hmsc->bdev_ops->Write(lun ,
- hmsc->bot_data,
- hmsc->scsi_blk_addr_in_blks,
- len / hmsc->scsi_blk_size) < 0)
- {
- SCSI_SenseCode(pdev,
- lun,
- HARDWARE_ERROR,
- WRITE_FAULT);
- return -1;
- }
-
-
- hmsc->scsi_blk_addr_in_blks += len / hmsc->scsi_blk_size;
- hmsc->scsi_blk_len -= len;
-
- /* case 12 : Ho = Do */
- hmsc->csw.dDataResidue -= len;
-
- if (hmsc->scsi_blk_len == 0)
- {
- MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_PASSED);
- }
- else
- {
- /* Prapare EP to Receive next packet */
- USBD_LL_PrepareReceive (pdev,
- MSC_OUT_EP,
- hmsc->bot_data,
- MIN (hmsc->scsi_blk_len, MSC_MEDIA_PACKET));
- }
-
- return 0;
-}
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_msc_scsi.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief This file provides all the USBD SCSI layer functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_msc_bot.h"
+#include "usbd_msc_scsi.h"
+#include "usbd_msc_data.h"
+#include "usbd_cdc_msc_hid.h"
+
+
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup MSC_SCSI
+ * @brief Mass storage SCSI layer module
+ * @{
+ */
+
+/** @defgroup MSC_SCSI_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_SCSI_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_SCSI_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_SCSI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_SCSI_Private_FunctionPrototypes
+ * @{
+ */
+static int8_t SCSI_TestUnitReady(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_Inquiry(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_ReadFormatCapacity(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_ReadCapacity10(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_RequestSense (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_StartStopUnit(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_AllowMediumRemoval(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_ModeSense6 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_ModeSense10 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_SynchronizeCache(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_Write10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params);
+static int8_t SCSI_Read10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params);
+static int8_t SCSI_Verify10(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params);
+static int8_t SCSI_CheckAddressRange (USBD_HandleTypeDef *pdev,
+ uint8_t lun ,
+ uint32_t blk_offset ,
+ uint16_t blk_nbr);
+static int8_t SCSI_ProcessRead (USBD_HandleTypeDef *pdev,
+ uint8_t lun);
+
+static int8_t SCSI_ProcessWrite (USBD_HandleTypeDef *pdev,
+ uint8_t lun);
+/**
+ * @}
+ */
+
+
+/** @defgroup MSC_SCSI_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief SCSI_ProcessCmd
+* Process SCSI commands
+* @param pdev: device instance
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+int8_t SCSI_ProcessCmd(USBD_HandleTypeDef *pdev,
+ uint8_t lun,
+ uint8_t *params)
+{
+ /*
+ if (params[0] != SCSI_READ10 && params[0] != SCSI_WRITE10) {
+ printf("SCSI_ProcessCmd(lun=%d, params=%x, %x)\n", lun, params[0], params[1]);
+ }
+ */
+
+ switch (params[0])
+ {
+ case SCSI_TEST_UNIT_READY:
+ return SCSI_TestUnitReady(pdev, lun, params);
+
+ case SCSI_REQUEST_SENSE:
+ return SCSI_RequestSense (pdev, lun, params);
+ case SCSI_INQUIRY:
+ return SCSI_Inquiry(pdev, lun, params);
+
+ case SCSI_START_STOP_UNIT:
+ return SCSI_StartStopUnit(pdev, lun, params);
+
+ case SCSI_ALLOW_MEDIUM_REMOVAL:
+ return SCSI_AllowMediumRemoval(pdev, lun, params);
+
+ case SCSI_MODE_SENSE6:
+ return SCSI_ModeSense6 (pdev, lun, params);
+
+ case SCSI_MODE_SENSE10:
+ return SCSI_ModeSense10 (pdev, lun, params);
+
+ case SCSI_SYNCHRONIZE_CACHE10:
+ case SCSI_SYNCHRONIZE_CACHE16:
+ return SCSI_SynchronizeCache(pdev, lun, params);
+
+ case SCSI_READ_FORMAT_CAPACITIES:
+ return SCSI_ReadFormatCapacity(pdev, lun, params);
+
+ case SCSI_READ_CAPACITY10:
+ return SCSI_ReadCapacity10(pdev, lun, params);
+
+ case SCSI_READ10:
+ return SCSI_Read10(pdev, lun, params);
+
+ case SCSI_WRITE10:
+ return SCSI_Write10(pdev, lun, params);
+
+ case SCSI_VERIFY10:
+ return SCSI_Verify10(pdev, lun, params);
+
+ default:
+ SCSI_SenseCode(pdev,
+ lun,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+ return -1;
+ }
+}
+
+
+/**
+* @brief SCSI_TestUnitReady
+* Process SCSI Test Unit Ready Command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_TestUnitReady(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ /* case 9 : Hi > D0 */
+ if (hmsc->cbw.dDataLength != 0)
+ {
+ SCSI_SenseCode(pdev,
+ hmsc->cbw.bLUN,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+ return -1;
+ }
+
+ if(hmsc->bdev_ops->IsReady(lun) !=0 )
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ NOT_READY,
+ MEDIUM_NOT_PRESENT);
+
+ hmsc->bot_state = USBD_BOT_NO_DATA;
+ return -1;
+ }
+ hmsc->bot_data_length = 0;
+ return 0;
+}
+
+/**
+* @brief SCSI_Inquiry
+* Process Inquiry command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_Inquiry(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ uint8_t* pPage;
+ uint16_t len;
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if (params[1] & 0x01)/*Evpd is set*/
+ {
+ pPage = (uint8_t *)MSC_Page00_Inquiry_Data;
+ len = LENGTH_INQUIRY_PAGE00;
+ }
+ else
+ {
+
+ pPage = (uint8_t *)&hmsc->bdev_ops->pInquiry[lun * STANDARD_INQUIRY_DATA_LEN];
+ len = pPage[4] + 5;
+
+ if (params[4] <= len)
+ {
+ len = params[4];
+ }
+ }
+ hmsc->bot_data_length = len;
+
+ while (len)
+ {
+ len--;
+ hmsc->bot_data[len] = pPage[len];
+ }
+ return 0;
+}
+
+/**
+* @brief SCSI_ReadCapacity10
+* Process Read Capacity 10 command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_ReadCapacity10(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if(hmsc->bdev_ops->GetCapacity(lun, &hmsc->scsi_blk_nbr, &hmsc->scsi_blk_size) != 0)
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ NOT_READY,
+ MEDIUM_NOT_PRESENT);
+ return -1;
+ }
+ else
+ {
+
+ hmsc->bot_data[0] = (uint8_t)((hmsc->scsi_blk_nbr - 1) >> 24);
+ hmsc->bot_data[1] = (uint8_t)((hmsc->scsi_blk_nbr - 1) >> 16);
+ hmsc->bot_data[2] = (uint8_t)((hmsc->scsi_blk_nbr - 1) >> 8);
+ hmsc->bot_data[3] = (uint8_t)(hmsc->scsi_blk_nbr - 1);
+
+ hmsc->bot_data[4] = (uint8_t)(hmsc->scsi_blk_size >> 24);
+ hmsc->bot_data[5] = (uint8_t)(hmsc->scsi_blk_size >> 16);
+ hmsc->bot_data[6] = (uint8_t)(hmsc->scsi_blk_size >> 8);
+ hmsc->bot_data[7] = (uint8_t)(hmsc->scsi_blk_size);
+
+ hmsc->bot_data_length = 8;
+ return 0;
+ }
+}
+/**
+* @brief SCSI_ReadFormatCapacity
+* Process Read Format Capacity command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_ReadFormatCapacity(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ uint16_t blk_size;
+ uint32_t blk_nbr;
+ uint16_t i;
+
+ for(i=0 ; i < 12 ; i++)
+ {
+ hmsc->bot_data[i] = 0;
+ }
+
+ if(hmsc->bdev_ops->GetCapacity(lun, &blk_nbr, &blk_size) != 0)
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ NOT_READY,
+ MEDIUM_NOT_PRESENT);
+ return -1;
+ }
+ else
+ {
+ hmsc->bot_data[3] = 0x08;
+ hmsc->bot_data[4] = (uint8_t)((blk_nbr - 1) >> 24);
+ hmsc->bot_data[5] = (uint8_t)((blk_nbr - 1) >> 16);
+ hmsc->bot_data[6] = (uint8_t)((blk_nbr - 1) >> 8);
+ hmsc->bot_data[7] = (uint8_t)(blk_nbr - 1);
+
+ hmsc->bot_data[8] = 0x02;
+ hmsc->bot_data[9] = (uint8_t)(blk_size >> 16);
+ hmsc->bot_data[10] = (uint8_t)(blk_size >> 8);
+ hmsc->bot_data[11] = (uint8_t)(blk_size);
+
+ hmsc->bot_data_length = 12;
+ return 0;
+ }
+}
+/**
+* @brief SCSI_ModeSense6
+* Process Mode Sense6 command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_ModeSense6 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+ uint16_t len = 8 ;
+ hmsc->bot_data_length = len;
+
+ while (len)
+ {
+ len--;
+ hmsc->bot_data[len] = MSC_Mode_Sense6_data[len];
+ }
+ return 0;
+}
+
+/**
+* @brief SCSI_ModeSense10
+* Process Mode Sense10 command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_ModeSense10 (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ uint16_t len = 8;
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ hmsc->bot_data_length = len;
+
+ while (len)
+ {
+ len--;
+ hmsc->bot_data[len] = MSC_Mode_Sense10_data[len];
+ }
+ return 0;
+}
+
+static int8_t SCSI_SynchronizeCache(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params) {
+ // nothing to synchronize, so just return "success"
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+ hmsc->bot_data_length = 0;
+ return 0;
+}
+
+/**
+* @brief SCSI_RequestSense
+* Process Request Sense command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+
+static int8_t SCSI_RequestSense (USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ uint8_t i;
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ for(i=0 ; i < REQUEST_SENSE_DATA_LEN ; i++)
+ {
+ hmsc->bot_data[i] = 0;
+ }
+
+ hmsc->bot_data[0] = 0x70;
+ hmsc->bot_data[7] = REQUEST_SENSE_DATA_LEN - 6;
+
+ if((hmsc->scsi_sense_head != hmsc->scsi_sense_tail)) {
+
+ hmsc->bot_data[2] = hmsc->scsi_sense[hmsc->scsi_sense_head].Skey;
+ hmsc->bot_data[12] = hmsc->scsi_sense[hmsc->scsi_sense_head].w.b.ASCQ;
+ hmsc->bot_data[13] = hmsc->scsi_sense[hmsc->scsi_sense_head].w.b.ASC;
+ hmsc->scsi_sense_head++;
+
+ if (hmsc->scsi_sense_head == SENSE_LIST_DEEPTH)
+ {
+ hmsc->scsi_sense_head = 0;
+ }
+ }
+ hmsc->bot_data_length = REQUEST_SENSE_DATA_LEN;
+
+ if (params[4] <= REQUEST_SENSE_DATA_LEN)
+ {
+ hmsc->bot_data_length = params[4];
+ }
+ return 0;
+}
+
+/**
+* @brief SCSI_SenseCode
+* Load the last error code in the error list
+* @param lun: Logical unit number
+* @param sKey: Sense Key
+* @param ASC: Additional Sense Key
+* @retval none
+
+*/
+void SCSI_SenseCode(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t sKey, uint8_t ASC)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ hmsc->scsi_sense[hmsc->scsi_sense_tail].Skey = sKey;
+ hmsc->scsi_sense[hmsc->scsi_sense_tail].w.ASC = ASC << 8;
+ hmsc->scsi_sense_tail++;
+ if (hmsc->scsi_sense_tail == SENSE_LIST_DEEPTH)
+ {
+ hmsc->scsi_sense_tail = 0;
+ }
+}
+/**
+* @brief SCSI_StartStopUnit
+* Process Start Stop Unit command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_StartStopUnit(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+ hmsc->bot_data_length = 0;
+
+ // On Mac OS X, when the device is ejected a SCSI_START_STOP_UNIT command is sent.
+ // Bit 0 of params[4] is the START bit.
+ // If we get a stop, we must really stop the device so that the Mac does not
+ // automatically remount it.
+ hmsc->bdev_ops->StartStopUnit(lun, params[4] & 1);
+
+ return 0;
+}
+
+/**
+* @brief SCSI_AllowMediumRemoval
+* Process Allow Medium Removal command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_AllowMediumRemoval(USBD_HandleTypeDef *pdev, uint8_t lun, uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+ hmsc->bot_data_length = 0;
+ hmsc->bdev_ops->PreventAllowMediumRemoval(lun, params[4]);
+ return 0;
+}
+
+/**
+* @brief SCSI_Read10
+* Process Read10 command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+static int8_t SCSI_Read10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if(hmsc->bot_state == USBD_BOT_IDLE) /* Idle */
+ {
+
+ /* case 10 : Ho <> Di */
+
+ if ((hmsc->cbw.bmFlags & 0x80) != 0x80)
+ {
+ SCSI_SenseCode(pdev,
+ hmsc->cbw.bLUN,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+ return -1;
+ }
+
+ if(hmsc->bdev_ops->IsReady(lun) !=0 )
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ NOT_READY,
+ MEDIUM_NOT_PRESENT);
+ return -1;
+ }
+
+ hmsc->scsi_blk_addr_in_blks = (params[2] << 24) | \
+ (params[3] << 16) | \
+ (params[4] << 8) | \
+ params[5];
+
+ hmsc->scsi_blk_len = (params[7] << 8) | \
+ params[8];
+
+
+
+ if( SCSI_CheckAddressRange(pdev, lun, hmsc->scsi_blk_addr_in_blks, hmsc->scsi_blk_len) < 0)
+ {
+ return -1; /* error */
+ }
+
+ hmsc->bot_state = USBD_BOT_DATA_IN;
+ hmsc->scsi_blk_len *= hmsc->scsi_blk_size;
+
+ /* cases 4,5 : Hi <> Dn */
+ if (hmsc->cbw.dDataLength != hmsc->scsi_blk_len)
+ {
+ SCSI_SenseCode(pdev,
+ hmsc->cbw.bLUN,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+ return -1;
+ }
+ }
+ hmsc->bot_data_length = MSC_MEDIA_PACKET;
+
+ return SCSI_ProcessRead(pdev, lun);
+}
+
+/**
+* @brief SCSI_Write10
+* Process Write10 command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+
+static int8_t SCSI_Write10 (USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if (hmsc->bot_state == USBD_BOT_IDLE) /* Idle */
+ {
+
+ /* case 8 : Hi <> Do */
+
+ if ((hmsc->cbw.bmFlags & 0x80) == 0x80)
+ {
+ SCSI_SenseCode(pdev,
+ hmsc->cbw.bLUN,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+ return -1;
+ }
+
+ /* Check whether Media is ready */
+ if(hmsc->bdev_ops->IsReady(lun) !=0 )
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ NOT_READY,
+ MEDIUM_NOT_PRESENT);
+ return -1;
+ }
+
+ /* Check If media is write-protected */
+ if(hmsc->bdev_ops->IsWriteProtected(lun) !=0 )
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ NOT_READY,
+ WRITE_PROTECTED);
+ return -1;
+ }
+
+
+ hmsc->scsi_blk_addr_in_blks = (params[2] << 24) | \
+ (params[3] << 16) | \
+ (params[4] << 8) | \
+ params[5];
+ hmsc->scsi_blk_len = (params[7] << 8) | \
+ params[8];
+
+ /* check if LBA address is in the right range */
+ if(SCSI_CheckAddressRange(pdev,
+ lun,
+ hmsc->scsi_blk_addr_in_blks,
+ hmsc->scsi_blk_len) < 0)
+ {
+ return -1; /* error */
+ }
+
+ hmsc->scsi_blk_len *= hmsc->scsi_blk_size;
+
+ /* cases 3,11,13 : Hn,Ho <> D0 */
+ if (hmsc->cbw.dDataLength != hmsc->scsi_blk_len)
+ {
+ SCSI_SenseCode(pdev,
+ hmsc->cbw.bLUN,
+ ILLEGAL_REQUEST,
+ INVALID_CDB);
+ return -1;
+ }
+
+ /* Prepare EP to receive first data packet */
+ hmsc->bot_state = USBD_BOT_DATA_OUT;
+ USBD_LL_PrepareReceive (pdev,
+ MSC_OUT_EP,
+ hmsc->bot_data,
+ MIN (hmsc->scsi_blk_len, MSC_MEDIA_PACKET));
+ }
+ else /* Write Process ongoing */
+ {
+ return SCSI_ProcessWrite(pdev, lun);
+ }
+ return 0;
+}
+
+
+/**
+* @brief SCSI_Verify10
+* Process Verify10 command
+* @param lun: Logical unit number
+* @param params: Command parameters
+* @retval status
+*/
+
+static int8_t SCSI_Verify10(USBD_HandleTypeDef *pdev, uint8_t lun , uint8_t *params)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if ((params[1]& 0x02) == 0x02)
+ {
+ SCSI_SenseCode (pdev,
+ lun,
+ ILLEGAL_REQUEST,
+ INVALID_FIELED_IN_COMMAND);
+ return -1; /* Error, Verify Mode Not supported*/
+ }
+
+ hmsc->scsi_blk_addr_in_blks = (params[2] << 24) | (params[3] << 16) | (params[4] << 8) | params[5];
+ hmsc->scsi_blk_len = (params[7] << 8) | params[8];
+
+ if(SCSI_CheckAddressRange(pdev,
+ lun,
+ hmsc->scsi_blk_addr_in_blks,
+ hmsc->scsi_blk_len) < 0)
+ {
+ return -1; /* error */
+ }
+ hmsc->bot_data_length = 0;
+ return 0;
+}
+
+/**
+* @brief SCSI_CheckAddressRange
+* Check address range
+* @param lun: Logical unit number
+* @param blk_offset: first block address
+* @param blk_nbr: number of block to be processed
+* @retval status
+*/
+static int8_t SCSI_CheckAddressRange (USBD_HandleTypeDef *pdev, uint8_t lun , uint32_t blk_offset , uint16_t blk_nbr)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ if ((blk_offset + blk_nbr) > hmsc->scsi_blk_nbr )
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ ILLEGAL_REQUEST,
+ ADDRESS_OUT_OF_RANGE);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+* @brief SCSI_ProcessRead
+* Handle Read Process
+* @param lun: Logical unit number
+* @retval status
+*/
+static int8_t SCSI_ProcessRead (USBD_HandleTypeDef *pdev, uint8_t lun)
+{
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+ uint32_t len;
+
+ len = MIN(hmsc->scsi_blk_len , MSC_MEDIA_PACKET);
+
+ if( hmsc->bdev_ops->Read(lun ,
+ hmsc->bot_data,
+ hmsc->scsi_blk_addr_in_blks,
+ len / hmsc->scsi_blk_size) < 0)
+ {
+
+ SCSI_SenseCode(pdev,
+ lun,
+ HARDWARE_ERROR,
+ UNRECOVERED_READ_ERROR);
+ return -1;
+ }
+
+
+ USBD_LL_Transmit (pdev,
+ MSC_IN_EP,
+ hmsc->bot_data,
+ len);
+
+
+ hmsc->scsi_blk_addr_in_blks += len / hmsc->scsi_blk_size;
+ hmsc->scsi_blk_len -= len;
+
+ /* case 6 : Hi = Di */
+ hmsc->csw.dDataResidue -= len;
+
+ if (hmsc->scsi_blk_len == 0)
+ {
+ hmsc->bot_state = USBD_BOT_LAST_DATA_IN;
+ }
+ return 0;
+}
+
+/**
+* @brief SCSI_ProcessWrite
+* Handle Write Process
+* @param lun: Logical unit number
+* @retval status
+*/
+
+static int8_t SCSI_ProcessWrite (USBD_HandleTypeDef *pdev, uint8_t lun)
+{
+ uint32_t len;
+ USBD_MSC_BOT_HandleTypeDef *hmsc = &((usbd_cdc_msc_hid_state_t*)pdev->pClassData)->MSC_BOT_ClassData;
+
+ len = MIN(hmsc->scsi_blk_len , MSC_MEDIA_PACKET);
+
+ if(hmsc->bdev_ops->Write(lun ,
+ hmsc->bot_data,
+ hmsc->scsi_blk_addr_in_blks,
+ len / hmsc->scsi_blk_size) < 0)
+ {
+ SCSI_SenseCode(pdev,
+ lun,
+ HARDWARE_ERROR,
+ WRITE_FAULT);
+ return -1;
+ }
+
+
+ hmsc->scsi_blk_addr_in_blks += len / hmsc->scsi_blk_size;
+ hmsc->scsi_blk_len -= len;
+
+ /* case 12 : Ho = Do */
+ hmsc->csw.dDataResidue -= len;
+
+ if (hmsc->scsi_blk_len == 0)
+ {
+ MSC_BOT_SendCSW (pdev, USBD_CSW_CMD_PASSED);
+ }
+ else
+ {
+ /* Prapare EP to Receive next packet */
+ USBD_LL_PrepareReceive (pdev,
+ MSC_OUT_EP,
+ hmsc->bot_data,
+ MIN (hmsc->scsi_blk_len, MSC_MEDIA_PACKET));
+ }
+
+ return 0;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/core/inc/usbd_core.h b/ports/stm32/usbdev/core/inc/usbd_core.h
index fb1d541f6b..5494be3a22 100644
--- a/ports/stm32/usbdev/core/inc/usbd_core.h
+++ b/ports/stm32/usbdev/core/inc/usbd_core.h
@@ -1,159 +1,159 @@
-/**
- ******************************************************************************
- * @file usbd_core.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief Header file for usbd_core.c
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_CORE_H
-#define __USBD_CORE_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_conf.h"
-#include "usbd_def.h"
-#include "usbd_ioreq.h"
-#include "usbd_ctlreq.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_CORE
- * @brief This file is the Header file for usbd_core.c file
- * @{
- */
-
-
-/** @defgroup USBD_CORE_Exported_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_CORE_Exported_TypesDefinitions
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_CORE_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_CORE_Exported_Variables
- * @{
- */
-#define USBD_SOF USBD_LL_SOF
-/**
- * @}
- */
-
-/** @defgroup USBD_CORE_Exported_FunctionsPrototype
- * @{
- */
-USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
-USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, const USBD_ClassTypeDef *pclass);
-
-USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
-USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
-
-USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
-USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
-USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
-
-USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
-USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
-
-USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
-USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
-
-USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
-
-/* USBD Low Level Driver */
-USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev, int high_speed);
-USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t ep_type,
- uint16_t ep_mps);
-
-USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
-USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size);
-
-USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size);
-
-uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-void USBD_LL_Delay (uint32_t Delay);
-
-/**
- * @}
- */
-
-#endif /* __USBD_CORE_H */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
-
-
+/**
+ ******************************************************************************
+ * @file usbd_core.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief Header file for usbd_core.c
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, const USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev, int high_speed);
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay (uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/ports/stm32/usbdev/core/inc/usbd_ctlreq.h b/ports/stm32/usbdev/core/inc/usbd_ctlreq.h
index 9edf079247..8c26884e64 100644
--- a/ports/stm32/usbdev/core/inc/usbd_ctlreq.h
+++ b/ports/stm32/usbdev/core/inc/usbd_ctlreq.h
@@ -1,106 +1,106 @@
-/**
- ******************************************************************************
- * @file usbd_req.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief header file for the usbd_req.c file
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#ifndef __USB_REQUEST_H_
-#define __USB_REQUEST_H_
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_REQ
- * @brief header file for the usbd_ioreq.c file
- * @{
- */
-
-/** @defgroup USBD_REQ_Exported_Defines
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Exported_Types
- * @{
- */
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_REQ_Exported_Macros
- * @{
- */
-/**
- * @}
- */
-
-/** @defgroup USBD_REQ_Exported_Variables
- * @{
- */
-/**
- * @}
- */
-
-/** @defgroup USBD_REQ_Exported_FunctionsPrototype
- * @{
- */
-
-USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-
-
-void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-
-void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
-
-void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
-/**
- * @}
- */
-
-#endif /* __USB_REQUEST_H_ */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __USB_REQUEST_H_
+#define __USB_REQUEST_H_
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#endif /* __USB_REQUEST_H_ */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/core/inc/usbd_def.h b/ports/stm32/usbdev/core/inc/usbd_def.h
index 1402062964..e0d1c37625 100644
--- a/ports/stm32/usbdev/core/inc/usbd_def.h
+++ b/ports/stm32/usbdev/core/inc/usbd_def.h
@@ -1,313 +1,313 @@
-/**
- ******************************************************************************
- * @file usbd_def.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief general defines for the usb device library
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#ifndef __USBD_DEF_H
-#define __USBD_DEF_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_conf.h"
-
-/** @addtogroup STM32_USBD_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USB_DEF
- * @brief general defines for the usb device library file
- * @{
- */
-
-/** @defgroup USB_DEF_Exported_Defines
- * @{
- */
-
-#ifndef NULL
-#define NULL ((void *)0)
-#endif
-
-
-#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
-#define USB_LEN_DEV_DESC 0x12
-#define USB_LEN_CFG_DESC 0x09
-#define USB_LEN_IF_DESC 0x09
-#define USB_LEN_EP_DESC 0x07
-#define USB_LEN_OTG_DESC 0x03
-#define USB_LEN_LANGID_STR_DESC 0x04
-#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
-
-#define USBD_IDX_LANGID_STR 0x00
-#define USBD_IDX_MFC_STR 0x01
-#define USBD_IDX_PRODUCT_STR 0x02
-#define USBD_IDX_SERIAL_STR 0x03
-#define USBD_IDX_CONFIG_STR 0x04
-#define USBD_IDX_INTERFACE_STR 0x05
-
-#define USB_REQ_TYPE_STANDARD 0x00
-#define USB_REQ_TYPE_CLASS 0x20
-#define USB_REQ_TYPE_VENDOR 0x40
-#define USB_REQ_TYPE_MASK 0x60
-
-#define USB_REQ_RECIPIENT_DEVICE 0x00
-#define USB_REQ_RECIPIENT_INTERFACE 0x01
-#define USB_REQ_RECIPIENT_ENDPOINT 0x02
-#define USB_REQ_RECIPIENT_MASK 0x03
-
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-
-#define USB_DESC_TYPE_DEVICE 1
-#define USB_DESC_TYPE_CONFIGURATION 2
-#define USB_DESC_TYPE_STRING 3
-#define USB_DESC_TYPE_INTERFACE 4
-#define USB_DESC_TYPE_ENDPOINT 5
-#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
-#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
-
-
-#define USB_CONFIG_REMOTE_WAKEUP 2
-#define USB_CONFIG_SELF_POWERED 1
-
-#define USB_FEATURE_EP_HALT 0
-#define USB_FEATURE_REMOTE_WAKEUP 1
-#define USB_FEATURE_TEST_MODE 2
-
-
-#define USB_HS_MAX_PACKET_SIZE 512
-#define USB_FS_MAX_PACKET_SIZE 64
-#define USB_MAX_EP0_SIZE 64
-
-/* Device Status */
-#define USBD_STATE_DEFAULT 1
-#define USBD_STATE_ADDRESSED 2
-#define USBD_STATE_CONFIGURED 3
-#define USBD_STATE_SUSPENDED 4
-
-
-/* EP0 State */
-#define USBD_EP0_IDLE 0
-#define USBD_EP0_SETUP 1
-#define USBD_EP0_DATA_IN 2
-#define USBD_EP0_DATA_OUT 3
-#define USBD_EP0_STATUS_IN 4
-#define USBD_EP0_STATUS_OUT 5
-#define USBD_EP0_STALL 6
-
-#define USBD_EP_TYPE_CTRL 0
-#define USBD_EP_TYPE_ISOC 1
-#define USBD_EP_TYPE_BULK 2
-#define USBD_EP_TYPE_INTR 3
-
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_DEF_Exported_TypesDefinitions
- * @{
- */
-
-typedef struct usb_setup_req
-{
-
- uint8_t bmRequest;
- uint8_t bRequest;
- uint16_t wValue;
- uint16_t wIndex;
- uint16_t wLength;
-}USBD_SetupReqTypedef;
-
-struct _USBD_HandleTypeDef;
-
-typedef struct _Device_cb
-{
- uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
- uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
- /* Control Endpoints*/
- uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
- uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
- uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
- /* Class Specific Endpoints*/
- uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
- uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
- uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
- uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
- uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
-
- uint8_t *(*GetHSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
- uint8_t *(*GetFSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
- uint8_t *(*GetOtherSpeedConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
- uint8_t *(*GetDeviceQualifierDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
-
-} USBD_ClassTypeDef;
-
-/* Following USB Device Speed */
-typedef enum
-{
- USBD_SPEED_HIGH = 0,
- USBD_SPEED_FULL = 1,
- USBD_SPEED_LOW = 2,
-}USBD_SpeedTypeDef;
-
-/* Following USB Device status */
-typedef enum {
- USBD_OK = 0,
- USBD_BUSY,
- USBD_FAIL,
-}USBD_StatusTypeDef;
-
-struct _USBD_HandleTypeDef;
-
-/* USB Device descriptors structure */
-typedef struct
-{
- uint8_t *(*GetDeviceDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
- uint8_t *(*GetStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t idx, uint16_t *length);
-} USBD_DescriptorsTypeDef;
-
-/* USB Device handle structure */
-typedef struct
-{
- uint32_t status;
- uint32_t total_length;
- uint32_t rem_length;
- uint32_t maxpacket;
-} USBD_EndpointTypeDef;
-
-/* USB Device handle structure */
-typedef struct _USBD_HandleTypeDef
-{
- uint8_t id;
- uint32_t dev_config;
- uint32_t dev_default_config;
- uint32_t dev_config_status;
- USBD_SpeedTypeDef dev_speed;
- USBD_EndpointTypeDef ep_in[15];
- USBD_EndpointTypeDef ep_out[15];
- uint32_t ep0_state;
- uint32_t ep0_data_len;
- uint8_t dev_state;
- uint8_t dev_old_state;
- uint8_t dev_address;
- uint8_t dev_connection_status;
- uint8_t dev_test_mode;
- uint32_t dev_remote_wakeup;
-
- USBD_SetupReqTypedef request;
- USBD_DescriptorsTypeDef *pDesc;
- const USBD_ClassTypeDef *pClass;
- void *pClassData;
- void *pUserData;
- void *pData;
-} USBD_HandleTypeDef;
-
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_DEF_Exported_Macros
- * @{
- */
-#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
- (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
-
-#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
-#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-#define MAX(a, b) (((a) > (b)) ? (a) : (b))
-
-
-#if defined ( __GNUC__ )
- #ifndef __weak
- #define __weak __attribute__((weak))
- #endif /* __weak */
- #ifndef __packed
- #define __packed __attribute__((__packed__))
- #endif /* __packed */
-#endif /* __GNUC__ */
-
-
-/* In HS mode and when the DMA is used, all variables and data structures dealing
- with the DMA during the transaction process should be 4-bytes aligned */
-
-#if defined (__GNUC__) /* GNU Compiler */
- #define __ALIGN_END __attribute__ ((aligned (4)))
- #define __ALIGN_BEGIN
-#else
- #define __ALIGN_END
- #if defined (__CC_ARM) /* ARM Compiler */
- #define __ALIGN_BEGIN __align(4)
- #elif defined (__ICCARM__) /* IAR Compiler */
- #define __ALIGN_BEGIN
- #elif defined (__TASKING__) /* TASKING Compiler */
- #define __ALIGN_BEGIN __align(4)
- #endif /* __CC_ARM */
-#endif /* __GNUC__ */
-
-
-/**
- * @}
- */
-
-/** @defgroup USBD_DEF_Exported_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_DEF_Exported_FunctionsPrototype
- * @{
- */
-
-/**
- * @}
- */
-
-#endif /* __USBD_DEF_H */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief general defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
+#define USB_LEN_DEV_DESC 0x12
+#define USB_LEN_CFG_DESC 0x09
+#define USB_LEN_IF_DESC 0x09
+#define USB_LEN_EP_DESC 0x07
+#define USB_LEN_OTG_DESC 0x03
+#define USB_LEN_LANGID_STR_DESC 0x04
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
+
+#define USBD_IDX_LANGID_STR 0x00
+#define USBD_IDX_MFC_STR 0x01
+#define USBD_IDX_PRODUCT_STR 0x02
+#define USBD_IDX_SERIAL_STR 0x03
+#define USBD_IDX_CONFIG_STR 0x04
+#define USBD_IDX_INTERFACE_STR 0x05
+
+#define USB_REQ_TYPE_STANDARD 0x00
+#define USB_REQ_TYPE_CLASS 0x20
+#define USB_REQ_TYPE_VENDOR 0x40
+#define USB_REQ_TYPE_MASK 0x60
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00
+#define USB_REQ_RECIPIENT_INTERFACE 0x01
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02
+#define USB_REQ_RECIPIENT_MASK 0x03
+
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_DESC_TYPE_DEVICE 1
+#define USB_DESC_TYPE_CONFIGURATION 2
+#define USB_DESC_TYPE_STRING 3
+#define USB_DESC_TYPE_INTERFACE 4
+#define USB_DESC_TYPE_ENDPOINT 5
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
+
+
+#define USB_CONFIG_REMOTE_WAKEUP 2
+#define USB_CONFIG_SELF_POWERED 1
+
+#define USB_FEATURE_EP_HALT 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+#define USB_FEATURE_TEST_MODE 2
+
+
+#define USB_HS_MAX_PACKET_SIZE 512
+#define USB_FS_MAX_PACKET_SIZE 64
+#define USB_MAX_EP0_SIZE 64
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 1
+#define USBD_STATE_ADDRESSED 2
+#define USBD_STATE_CONFIGURED 3
+#define USBD_STATE_SUSPENDED 4
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0
+#define USBD_EP0_SETUP 1
+#define USBD_EP0_DATA_IN 2
+#define USBD_EP0_DATA_OUT 3
+#define USBD_EP0_STATUS_IN 4
+#define USBD_EP0_STATUS_OUT 5
+#define USBD_EP0_STALL 6
+
+#define USBD_EP_TYPE_CTRL 0
+#define USBD_EP_TYPE_ISOC 1
+#define USBD_EP_TYPE_BULK 2
+#define USBD_EP_TYPE_INTR 3
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
+ uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0,
+ USBD_SPEED_FULL = 1,
+ USBD_SPEED_LOW = 2,
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+ USBD_OK = 0,
+ USBD_BUSY,
+ USBD_FAIL,
+}USBD_StatusTypeDef;
+
+struct _USBD_HandleTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)(struct _USBD_HandleTypeDef *pdev, uint16_t *length);
+ uint8_t *(*GetStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t idx, uint16_t *length);
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[15];
+ USBD_EndpointTypeDef ep_out[15];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ const USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
+
+#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
+#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+#else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/core/inc/usbd_ioreq.h b/ports/stm32/usbdev/core/inc/usbd_ioreq.h
index 04e01b854b..c964f0ad5a 100644
--- a/ports/stm32/usbdev/core/inc/usbd_ioreq.h
+++ b/ports/stm32/usbdev/core/inc/usbd_ioreq.h
@@ -1,121 +1,121 @@
-/**
- ******************************************************************************
- * @file usbd_ioreq.h
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief header file for the usbd_ioreq.c file
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#ifndef __USBD_IOREQ_H_
-#define __USBD_IOREQ_H_
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-#include "usbd_core.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_IOREQ
- * @brief header file for the usbd_ioreq.c file
- * @{
- */
-
-/** @defgroup USBD_IOREQ_Exported_Defines
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Exported_Types
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_IOREQ_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_IOREQ_Exported_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
- * @{
- */
-
-USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
- uint8_t *buf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
-
-USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
-
-uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
- uint8_t epnum);
-
-/**
- * @}
- */
-
-#endif /* __USBD_IOREQ_H_ */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __USBD_IOREQ_H_
+#define __USBD_IOREQ_H_
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *buf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
+
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
+ uint8_t epnum);
+
+/**
+ * @}
+ */
+
+#endif /* __USBD_IOREQ_H_ */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/core/src/usbd_core.c b/ports/stm32/usbdev/core/src/usbd_core.c
index 0097036633..f235b24ee6 100644
--- a/ports/stm32/usbdev/core/src/usbd_core.c
+++ b/ports/stm32/usbdev/core/src/usbd_core.c
@@ -1,552 +1,552 @@
-/**
- ******************************************************************************
- * @file usbd_core.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief This file provides all the USBD core functions.
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_core.h"
-
-/** @addtogroup STM32_USBD_DEVICE_LIBRARY
-* @{
-*/
-
-
-/** @defgroup USBD_CORE
-* @brief usbd core module
-* @{
-*/
-
-/** @defgroup USBD_CORE_Private_TypesDefinitions
-* @{
-*/
-/**
-* @}
-*/
-
-
-/** @defgroup USBD_CORE_Private_Defines
-* @{
-*/
-
-/**
-* @}
-*/
-
-
-/** @defgroup USBD_CORE_Private_Macros
-* @{
-*/
-/**
-* @}
-*/
-
-
-
-
-/** @defgroup USBD_CORE_Private_FunctionPrototypes
-* @{
-*/
-
-/**
-* @}
-*/
-
-/** @defgroup USBD_CORE_Private_Variables
-* @{
-*/
-
-/**
-* @}
-*/
-
-/** @defgroup USBD_CORE_Private_Functions
-* @{
-*/
-
-/**
-* @brief USBD_Init
-* Initailizes the device stack and load the class driver
-* @param pdev: device instance
-* @param core_address: USB OTG core ID
-* @param pdesc: Descriptor structure address
-* @param id: Low level core index
-* @retval None
-*/
-USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
-{
- /* Check whether the USB Host handle is valid */
- if(pdev == NULL)
- {
- return USBD_FAIL;
- }
-
- /* Unlink previous class*/
- if(pdev->pClass != NULL)
- {
- pdev->pClass = NULL;
- }
-
- /* Assign USBD Descriptors */
- if(pdesc != NULL)
- {
- pdev->pDesc = pdesc;
- }
-
- /* Set Device initial State */
- pdev->dev_state = USBD_STATE_DEFAULT;
- pdev->id = id;
- /* Initialize low level driver */
- USBD_LL_Init(pdev, 0);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DeInit
-* Re-Initialize th device library
-* @param pdev: device instance
-* @retval status: status
-*/
-USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
-{
- /* Set Default State */
- pdev->dev_state = USBD_STATE_DEFAULT;
-
- /* Free Class Resources */
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
- /* Stop the low level driver */
- USBD_LL_Stop(pdev);
-
- /* Initialize low level driver */
- USBD_LL_DeInit(pdev);
-
- return USBD_OK;
-}
-
-
-/**
- * @brief USBD_RegisterClass
- * Link class driver to Device Core.
- * @param pDevice : Device Handle
- * @param pclass: Class handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, const USBD_ClassTypeDef *pclass)
-{
- USBD_StatusTypeDef status = USBD_OK;
- if(pclass != 0)
- {
- /* link the class tgo the USB Device handle */
- pdev->pClass = pclass;
- status = USBD_OK;
- }
- else
- {
- status = USBD_FAIL;
- }
-
- return status;
-}
-
-/**
- * @brief USBD_Start
- * Start the USB Device Core.
- * @param pdev: Device Handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
-{
-
- /* Start the low level driver */
- USBD_LL_Start(pdev);
-
- return USBD_OK;
-}
-
-/**
- * @brief USBD_Stop
- * Stop the USB Device Core.
- * @param pdev: Device Handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
-{
- /* Free Class Resources */
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
- /* Stop the low level driver */
- USBD_LL_Stop(pdev);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_RunTestMode
-* Launch test mode process
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
-{
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_SetClassConfig
-* Configure device and start the interface
-* @param pdev: device instance
-* @param cfgidx: configuration index
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
-{
- USBD_StatusTypeDef ret = USBD_FAIL;
-
- if(pdev->pClass != NULL)
- {
- /* Set configuration and Start the Class*/
- if(pdev->pClass->Init(pdev, cfgidx) == 0)
- {
- ret = USBD_OK;
- }
- }
- return ret;
-}
-
-/**
-* @brief USBD_ClrClassConfig
-* Clear current configuration
-* @param pdev: device instance
-* @param cfgidx: configuration index
-* @retval status: USBD_StatusTypeDef
-*/
-USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
-{
- /* Clear configuration and Deinitialize the Class process*/
- pdev->pClass->DeInit(pdev, cfgidx);
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_SetupStage
-* Handle the setup stage
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
-{
-
- USBD_ParseSetupRequest(&pdev->request, psetup);
-
- pdev->ep0_state = USBD_EP0_SETUP;
- pdev->ep0_data_len = pdev->request.wLength;
-
- switch (pdev->request.bmRequest & 0x1F)
- {
- case USB_REQ_RECIPIENT_DEVICE:
- USBD_StdDevReq (pdev, &pdev->request);
- break;
-
- case USB_REQ_RECIPIENT_INTERFACE:
- USBD_StdItfReq(pdev, &pdev->request);
- break;
-
- case USB_REQ_RECIPIENT_ENDPOINT:
- USBD_StdEPReq(pdev, &pdev->request);
- break;
-
- default:
- USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
- break;
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DataOutStage
-* Handle data OUT stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
-{
- USBD_EndpointTypeDef *pep;
-
- if(epnum == 0)
- {
- pep = &pdev->ep_out[0];
-
- if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
- {
- if(pep->rem_length > pep->maxpacket)
- {
- pep->rem_length -= pep->maxpacket;
-
- USBD_CtlContinueRx (pdev,
- pdata,
- MIN(pep->rem_length ,pep->maxpacket));
- }
- else
- {
- if((pdev->pClass->EP0_RxReady != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->EP0_RxReady(pdev);
- }
- USBD_CtlSendStatus(pdev);
- }
- }
- }
- else if((pdev->pClass->DataOut != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->DataOut(pdev, epnum);
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DataInStage
-* Handle data in stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
-{
- USBD_EndpointTypeDef *pep;
-
- if(epnum == 0)
- {
- pep = &pdev->ep_in[0];
-
- if ( pdev->ep0_state == USBD_EP0_DATA_IN)
- {
- if(pep->rem_length > pep->maxpacket)
- {
- pep->rem_length -= pep->maxpacket;
-
- USBD_CtlContinueSendData (pdev,
- pdata,
- pep->rem_length);
- }
- else
- { /* last packet is MPS multiple, so send ZLP packet */
- if((pep->total_length % pep->maxpacket == 0) &&
- (pep->total_length >= pep->maxpacket) &&
- (pep->total_length < pdev->ep0_data_len ))
- {
-
- USBD_CtlContinueSendData(pdev , NULL, 0);
- pdev->ep0_data_len = 0;
- }
- else
- {
- if((pdev->pClass->EP0_TxSent != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->EP0_TxSent(pdev);
- }
- USBD_CtlReceiveStatus(pdev);
- }
- }
- }
- if (pdev->dev_test_mode == 1)
- {
- USBD_RunTestMode(pdev);
- pdev->dev_test_mode = 0;
- }
- }
- else if((pdev->pClass->DataIn != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->DataIn(pdev, epnum);
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_LL_Reset
-* Handle Reset event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
-{
- /* Open EP0 OUT */
- USBD_LL_OpenEP(pdev,
- 0x00,
- USBD_EP_TYPE_CTRL,
- USB_MAX_EP0_SIZE);
-
- pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
-
- /* Open EP0 IN */
- USBD_LL_OpenEP(pdev,
- 0x80,
- USBD_EP_TYPE_CTRL,
- USB_MAX_EP0_SIZE);
-
- pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
- /* Upon Reset call usr call back */
- pdev->dev_state = USBD_STATE_DEFAULT;
-
- if (pdev->pClassData)
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
-
- return USBD_OK;
-}
-
-
-
-
-/**
-* @brief USBD_LL_Reset
-* Handle Reset event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
-{
- pdev->dev_speed = speed;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_Suspend
-* Handle Suspend event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
-{
- pdev->dev_old_state = pdev->dev_state;
- pdev->dev_state = USBD_STATE_SUSPENDED;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_Resume
-* Handle Resume event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
-{
- pdev->dev_state = pdev->dev_old_state;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_SOF
-* Handle SOF event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
-{
- if(pdev->dev_state == USBD_STATE_CONFIGURED)
- {
- if(pdev->pClass->SOF != NULL)
- {
- pdev->pClass->SOF(pdev);
- }
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_IsoINIncomplete
-* Handle iso in incomplete event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
-{
- return USBD_OK;
-}
-
-/**
-* @brief USBD_IsoOUTIncomplete
-* Handle iso out incomplete event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
-{
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DevConnected
-* Handle device connection event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
-{
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DevDisconnected
-* Handle device disconnection event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
-{
- /* Free Class Resources */
- pdev->dev_state = USBD_STATE_DEFAULT;
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
- return USBD_OK;
-}
-/**
-* @}
-*/
-
-
-/**
-* @}
-*/
-
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+/**
+* @}
+*/
+
+
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initailizes the device stack and load the class driver
+* @param pdev: device instance
+* @param core_address: USB OTG core ID
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if(pdev == NULL)
+ {
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if(pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if(pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev, 0);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, const USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if(pclass != 0)
+ {
+ /* link the class tgo the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
+{
+
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if(pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if(pdev->pClass->Init(pdev, cfgidx) == 0)
+ {
+ ret = USBD_OK;
+ }
+ }
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and Deinitialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1F)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq (pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_out[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx (pdev,
+ pdata,
+ MIN(pep->rem_length ,pep->maxpacket));
+ }
+ else
+ {
+ if((pdev->pClass->EP0_RxReady != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ }
+ else if((pdev->pClass->DataOut != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_in[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData (pdev,
+ pdata,
+ pep->rem_length);
+ }
+ else
+ { /* last packet is MPS multiple, so send ZLP packet */
+ if((pep->total_length % pep->maxpacket == 0) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len ))
+ {
+
+ USBD_CtlContinueSendData(pdev , NULL, 0);
+ pdev->ep0_data_len = 0;
+ }
+ else
+ {
+ if((pdev->pClass->EP0_TxSent != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ if (pdev->dev_test_mode == 1)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0;
+ }
+ }
+ else if((pdev->pClass->DataIn != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev,
+ 0x00,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev,
+ 0x80,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+ /* Upon Reset call usr call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ if (pdev->pClassData)
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+
+ return USBD_OK;
+}
+
+
+
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_state = pdev->dev_old_state;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if(pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if(pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/ports/stm32/usbdev/core/src/usbd_ctlreq.c b/ports/stm32/usbdev/core/src/usbd_ctlreq.c
index a68016bf45..f25f252d64 100644
--- a/ports/stm32/usbdev/core/src/usbd_ctlreq.c
+++ b/ports/stm32/usbdev/core/src/usbd_ctlreq.c
@@ -1,740 +1,740 @@
-/**
- ******************************************************************************
- * @file usbd_req.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief This file provides the standard USB requests following chapter 9.
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_ctlreq.h"
-#include "usbd_ioreq.h"
-
-
-/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup USBD_REQ
- * @brief USB standard requests module
- * @{
- */
-
-/** @defgroup USBD_REQ_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Variables
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_FunctionPrototypes
- * @{
- */
-static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static uint8_t USBD_GetLen(uint8_t *buf);
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Functions
- * @{
- */
-
-
-/**
-* @brief USBD_StdDevReq
-* Handle standard usb device requests
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
-{
- USBD_StatusTypeDef ret = USBD_OK;
-
- switch (req->bRequest)
- {
- case USB_REQ_GET_DESCRIPTOR:
-
- USBD_GetDescriptor (pdev, req) ;
- break;
-
- case USB_REQ_SET_ADDRESS:
- USBD_SetAddress(pdev, req);
- break;
-
- case USB_REQ_SET_CONFIGURATION:
- USBD_SetConfig (pdev , req);
- break;
-
- case USB_REQ_GET_CONFIGURATION:
- USBD_GetConfig (pdev , req);
- break;
-
- case USB_REQ_GET_STATUS:
- USBD_GetStatus (pdev , req);
- break;
-
-
- case USB_REQ_SET_FEATURE:
- USBD_SetFeature (pdev , req);
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- USBD_ClrFeature (pdev , req);
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
-
- return ret;
-}
-
-/**
-* @brief USBD_StdItfReq
-* Handle standard usb interface requests
-* @param pdev: USB OTG device instance
-* @param req: usb request
-* @retval status
-*/
-USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
-{
- USBD_StatusTypeDef ret = USBD_OK;
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_CONFIGURED:
-
- if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
- {
- pdev->pClass->Setup (pdev, req);
-
- if((req->wLength == 0)&& (ret == USBD_OK))
- {
- USBD_CtlSendStatus(pdev);
- }
- }
- else
- {
- USBD_CtlError(pdev , req);
- }
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_StdEPReq
-* Handle standard usb endpoint requests
-* @param pdev: USB OTG device instance
-* @param req: usb request
-* @retval status
-*/
-USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
-{
-
- uint8_t ep_addr;
- USBD_StatusTypeDef ret = USBD_OK;
- USBD_EndpointTypeDef *pep;
- ep_addr = LOBYTE(req->wIndex);
-
- switch (req->bRequest)
- {
-
- case USB_REQ_SET_FEATURE :
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if ((ep_addr != 0x00) && (ep_addr != 0x80))
- {
- USBD_LL_StallEP(pdev , ep_addr);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- if (req->wValue == USB_FEATURE_EP_HALT)
- {
- if ((ep_addr != 0x00) && (ep_addr != 0x80))
- {
- USBD_LL_StallEP(pdev , ep_addr);
-
- }
- }
- pdev->pClass->Setup (pdev, req);
- USBD_CtlSendStatus(pdev);
-
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- break;
-
- case USB_REQ_CLEAR_FEATURE :
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if ((ep_addr != 0x00) && (ep_addr != 0x80))
- {
- USBD_LL_StallEP(pdev , ep_addr);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- if (req->wValue == USB_FEATURE_EP_HALT)
- {
- if ((ep_addr & 0x7F) != 0x00)
- {
- USBD_LL_ClearStallEP(pdev , ep_addr);
- pdev->pClass->Setup (pdev, req);
- }
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- break;
-
- case USB_REQ_GET_STATUS:
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if ((ep_addr & 0x7F) != 0x00)
- {
- USBD_LL_StallEP(pdev , ep_addr);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
- &pdev->ep_out[ep_addr & 0x7F];
- if(USBD_LL_IsStallEP(pdev, ep_addr))
- {
- pep->status = 0x0001;
- }
- else
- {
- pep->status = 0x0000;
- }
-
- USBD_CtlSendData (pdev,
- (uint8_t *)&pep->status,
- 2);
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- break;
-
- default:
- break;
- }
- return ret;
-}
-/**
-* @brief USBD_GetDescriptor
-* Handle Get Descriptor requests
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- uint16_t len;
- uint8_t *pbuf;
-
-
- switch (req->wValue >> 8)
- {
- case USB_DESC_TYPE_DEVICE:
- pbuf = pdev->pDesc->GetDeviceDescriptor(pdev, &len);
- break;
-
- case USB_DESC_TYPE_CONFIGURATION:
- if(pdev->dev_speed == USBD_SPEED_HIGH )
- {
- pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(pdev, &len);
- pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
- }
- else
- {
- pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(pdev, &len);
- pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
- }
- break;
-
- case USB_DESC_TYPE_STRING:
- pbuf = pdev->pDesc->GetStrDescriptor(pdev, req->wValue & 0xff, &len);
- if (pbuf == NULL) {
- USBD_CtlError(pdev, req);
- return;
- }
- break;
-
- case USB_DESC_TYPE_DEVICE_QUALIFIER:
-
- if(pdev->dev_speed == USBD_SPEED_HIGH )
- {
- pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(pdev, &len);
- break;
- }
- else
- {
- USBD_CtlError(pdev , req);
- return;
- }
-
- case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
- if(pdev->dev_speed == USBD_SPEED_HIGH )
- {
- pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(pdev, &len);
- pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
- break;
- }
- else
- {
- USBD_CtlError(pdev , req);
- return;
- }
-
- default:
- USBD_CtlError(pdev , req);
- return;
- }
-
- if((len != 0)&& (req->wLength != 0))
- {
-
- len = MIN(len , req->wLength);
-
- USBD_CtlSendData (pdev,
- pbuf,
- len);
- }
-
-}
-
-/**
-* @brief USBD_SetAddress
-* Set device address
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- uint8_t dev_addr;
-
- if ((req->wIndex == 0) && (req->wLength == 0))
- {
- dev_addr = (uint8_t)(req->wValue) & 0x7F;
-
- if (pdev->dev_state == USBD_STATE_CONFIGURED)
- {
- USBD_CtlError(pdev , req);
- }
- else
- {
- pdev->dev_address = dev_addr;
- USBD_LL_SetUSBAddress(pdev, dev_addr);
- USBD_CtlSendStatus(pdev);
-
- if (dev_addr != 0)
- {
- pdev->dev_state = USBD_STATE_ADDRESSED;
- }
- else
- {
- pdev->dev_state = USBD_STATE_DEFAULT;
- }
- }
- }
- else
- {
- USBD_CtlError(pdev , req);
- }
-}
-
-/**
-* @brief USBD_SetConfig
-* Handle Set device configuration request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
- uint8_t cfgidx;
-
- cfgidx = (uint8_t)(req->wValue);
-
- if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
- {
- USBD_CtlError(pdev , req);
- }
- else
- {
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if (cfgidx)
- {
- pdev->dev_config = cfgidx;
- pdev->dev_state = USBD_STATE_CONFIGURED;
- if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
- {
- USBD_CtlError(pdev , req);
- return;
- }
- USBD_CtlSendStatus(pdev);
- }
- else
- {
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- if (cfgidx == 0)
- {
- pdev->dev_state = USBD_STATE_ADDRESSED;
- pdev->dev_config = cfgidx;
- USBD_ClrClassConfig(pdev , cfgidx);
- USBD_CtlSendStatus(pdev);
-
- }
- else if (cfgidx != pdev->dev_config)
- {
- /* Clear old configuration */
- USBD_ClrClassConfig(pdev , pdev->dev_config);
-
- /* set new configuration */
- pdev->dev_config = cfgidx;
- if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
- {
- USBD_CtlError(pdev , req);
- return;
- }
- USBD_CtlSendStatus(pdev);
- }
- else
- {
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- }
-}
-
-/**
-* @brief USBD_GetConfig
-* Handle Get device configuration request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
- if (req->wLength != 1)
- {
- USBD_CtlError(pdev , req);
- }
- else
- {
- switch (pdev->dev_state )
- {
- case USBD_STATE_ADDRESSED:
- pdev->dev_default_config = 0;
- USBD_CtlSendData (pdev,
- (uint8_t *)&pdev->dev_default_config,
- 1);
- break;
-
- case USBD_STATE_CONFIGURED:
-
- USBD_CtlSendData (pdev,
- (uint8_t *)&pdev->dev_config,
- 1);
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- }
-}
-
-/**
-* @brief USBD_GetStatus
-* Handle Get Status request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- case USBD_STATE_CONFIGURED:
-
-#if ( USBD_SELF_POWERED == 1)
- pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
-#else
- pdev->dev_config_status = 0;
-#endif
-
- if (pdev->dev_remote_wakeup)
- {
- pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
- }
-
- USBD_CtlSendData (pdev,
- (uint8_t *)& pdev->dev_config_status,
- 2);
- break;
-
- default :
- USBD_CtlError(pdev , req);
- break;
- }
-}
-
-
-/**
-* @brief USBD_SetFeature
-* Handle Set device feature request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
- if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
- {
- pdev->dev_remote_wakeup = 1;
- pdev->pClass->Setup (pdev, req);
- USBD_CtlSendStatus(pdev);
- }
-
-}
-
-
-/**
-* @brief USBD_ClrFeature
-* Handle clear device feature request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- case USBD_STATE_CONFIGURED:
- if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
- {
- pdev->dev_remote_wakeup = 0;
- pdev->pClass->Setup (pdev, req);
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- default :
- USBD_CtlError(pdev , req);
- break;
- }
-}
-
-/**
-* @brief USBD_ParseSetupRequest
-* Copy buffer into setup structure
-* @param pdev: device instance
-* @param req: usb request
-* @retval None
-*/
-
-void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
-{
- req->bmRequest = *(uint8_t *) (pdata);
- req->bRequest = *(uint8_t *) (pdata + 1);
- req->wValue = SWAPBYTE (pdata + 2);
- req->wIndex = SWAPBYTE (pdata + 4);
- req->wLength = SWAPBYTE (pdata + 6);
-
-}
-
-/**
-* @brief USBD_CtlError
-* Handle USB low level Error
-* @param pdev: device instance
-* @param req: usb request
-* @retval None
-*/
-
-void USBD_CtlError( USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- USBD_LL_StallEP(pdev , 0x80);
- USBD_LL_StallEP(pdev , 0);
-}
-
-
-/**
- * @brief USBD_GetString
- * Convert Ascii string into unicode one
- * @param desc : descriptor buffer
- * @param unicode : Formatted string buffer (unicode)
- * @param len : descriptor length
- * @retval None
- */
-void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
-{
- uint8_t idx = 0;
-
- if (desc != NULL)
- {
- *len = USBD_GetLen(desc) * 2 + 2;
- unicode[idx++] = *len;
- unicode[idx++] = USB_DESC_TYPE_STRING;
-
- while (*desc != '\0')
- {
- unicode[idx++] = *desc++;
- unicode[idx++] = 0x00;
- }
- }
-}
-
-/**
- * @brief USBD_GetLen
- * return the string length
- * @param buf : pointer to the ascii string buffer
- * @retval string length
- */
-static uint8_t USBD_GetLen(uint8_t *buf)
-{
- uint8_t len = 0;
-
- while (*buf != '\0')
- {
- len++;
- buf++;
- }
-
- return len;
-}
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ USBD_GetDescriptor (pdev, req) ;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress(pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus (pdev , req);
+ break;
+
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature (pdev , req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature (pdev , req);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: USB OTG device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ if((req->wLength == 0)&& (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: USB OTG device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ USBD_EndpointTypeDef *pep;
+ ep_addr = LOBYTE(req->wIndex);
+
+ switch (req->bRequest)
+ {
+
+ case USB_REQ_SET_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+
+ }
+ }
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_ClearStallEP(pdev , ep_addr);
+ pdev->pClass->Setup (pdev, req);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
+ &pdev->ep_out[ep_addr & 0x7F];
+ if(USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001;
+ }
+ else
+ {
+ pep->status = 0x0000;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pep->status,
+ 2);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len;
+ uint8_t *pbuf;
+
+
+ switch (req->wValue >> 8)
+ {
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(pdev, &len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(pdev, &len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ pbuf = pdev->pDesc->GetStrDescriptor(pdev, req->wValue & 0xff, &len);
+ if (pbuf == NULL) {
+ USBD_CtlError(pdev, req);
+ return;
+ }
+ break;
+
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(pdev, &len);
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(pdev, &len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ default:
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ if((len != 0)&& (req->wLength != 0))
+ {
+
+ len = MIN(len , req->wLength);
+
+ USBD_CtlSendData (pdev,
+ pbuf,
+ len);
+ }
+
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0) && (req->wLength == 0))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7F;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev , cfgidx);
+ USBD_CtlSendStatus(pdev);
+
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev , pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wLength != 1)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state )
+ {
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0;
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_default_config,
+ 1);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_config,
+ 1);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+#if ( USBD_SELF_POWERED == 1)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)& pdev->dev_config_status,
+ 2);
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *) (pdata);
+ req->bRequest = *(uint8_t *) (pdata + 1);
+ req->wValue = SWAPBYTE (pdata + 2);
+ req->wIndex = SWAPBYTE (pdata + 4);
+ req->wLength = SWAPBYTE (pdata + 6);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError( USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev , 0x80);
+ USBD_LL_StallEP(pdev , 0);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0;
+
+ if (desc != NULL)
+ {
+ *len = USBD_GetLen(desc) * 2 + 2;
+ unicode[idx++] = *len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0x00;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/ports/stm32/usbdev/core/src/usbd_ioreq.c b/ports/stm32/usbdev/core/src/usbd_ioreq.c
index 9e396ba566..aab59fcef5 100644
--- a/ports/stm32/usbdev/core/src/usbd_ioreq.c
+++ b/ports/stm32/usbdev/core/src/usbd_ioreq.c
@@ -1,236 +1,236 @@
-/**
- ******************************************************************************
- * @file usbd_ioreq.c
- * @author MCD Application Team
- * @version V2.0.0
- * @date 18-February-2014
- * @brief This file provides the IO requests APIs for control endpoints.
- ******************************************************************************
- * @attention
- *
- * © COPYRIGHT 2014 STMicroelectronics
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_ioreq.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup USBD_IOREQ
- * @brief control I/O requests module
- * @{
- */
-
-/** @defgroup USBD_IOREQ_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Functions
- * @{
- */
-
-/**
-* @brief USBD_CtlSendData
-* send data on the ctl pipe
-* @param pdev: device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be sent
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_DATA_IN;
- pdev->ep_in[0].total_length = len;
- pdev->ep_in[0].rem_length = len;
- /* Start the transfer */
- USBD_LL_Transmit (pdev, 0x00, pbuf, len);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlContinueSendData
-* continue sending data on the ctl pipe
-* @param pdev: device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be sent
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
- /* Start the next transfer */
- USBD_LL_Transmit (pdev, 0x00, pbuf, len);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlPrepareRx
-* receive data on the ctl pipe
-* @param pdev: USB OTG device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be received
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_DATA_OUT;
- pdev->ep_out[0].total_length = len;
- pdev->ep_out[0].rem_length = len;
- /* Start the transfer */
- USBD_LL_PrepareReceive (pdev,
- 0,
- pbuf,
- len);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlContinueRx
-* continue receive data on the ctl pipe
-* @param pdev: USB OTG device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be received
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
-
- USBD_LL_PrepareReceive (pdev,
- 0,
- pbuf,
- len);
- return USBD_OK;
-}
-/**
-* @brief USBD_CtlSendStatus
-* send zero lzngth packet on the ctl pipe
-* @param pdev: USB OTG device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
-{
-
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_STATUS_IN;
-
- /* Start the transfer */
- USBD_LL_Transmit (pdev, 0x00, NULL, 0);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlReceiveStatus
-* receive zero lzngth packet on the ctl pipe
-* @param pdev: USB OTG device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
-{
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_STATUS_OUT;
-
- /* Start the transfer */
- USBD_LL_PrepareReceive ( pdev,
- 0,
- NULL,
- 0);
-
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_GetRxCount
-* returns the received data length
-* @param pdev: USB OTG device instance
-* epnum: endpoint index
-* @retval Rx Data blength
-*/
-uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
-{
- return USBD_LL_GetRxDataSize(pdev, ep_addr);
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 18-February-2014
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: USB OTG device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: USB OTG device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+ return USBD_OK;
+}
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: USB OTG device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
+{
+
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, NULL, 0);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: USB OTG device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive ( pdev,
+ 0,
+ NULL,
+ 0);
+
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: USB OTG device instance
+* epnum: endpoint index
+* @retval Rx Data blength
+*/
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/