esp32: Rename GENERIC* boards to ESP32_GENERIC*.

Board names need to be unique across ports, and GENERIC clashes with
the ESP8266 (which will be renamed to ESP8266_GENERIC).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

ports/esp32/CMakeLists.txt

@@ -4,7 +4,7 @@ cmake_minimum_required(VERSION 3.12)
 
 # Set the board if it's not already set.
 if(NOT MICROPY_BOARD)
-    set(MICROPY_BOARD GENERIC)
+    set(MICROPY_BOARD ESP32_GENERIC)
 endif()
 
 # Set the board directory and check that it exists.

ports/esp32/Makefile

@@ -8,12 +8,15 @@ ifdef BOARD_DIR
 # the path as the board name.
 BOARD ?= $(notdir $(BOARD_DIR:/=))
 else
-# If not given on the command line, then default to GENERIC.
-BOARD ?= GENERIC
+# If not given on the command line, then default to ESP32_GENERIC.
+BOARD ?= ESP32_GENERIC
 BOARD_DIR ?= boards/$(BOARD)
 endif
 
 ifeq ($(wildcard $(BOARD_DIR)/.),)
+ifeq ($(findstring boards/GENERIC,$(BOARD_DIR)),boards/GENERIC)
+$(warning The GENERIC* boards have been renamed to ESP32_GENERIC*)
+endif
 $(error Invalid BOARD specified: $(BOARD_DIR))
 endif
 

ports/esp32/README.md

@@ -93,7 +93,7 @@ $ make submodules
 $ make
 ```
 
-This will produce a combined `firmware.bin` image in the `build-GENERIC/`
+This will produce a combined `firmware.bin` image in the `build-ESP32_GENERIC/`
 subdirectory (this firmware image is made up of: bootloader.bin, partitions.bin
 and micropython.bin).
 
@@ -123,12 +123,12 @@ To flash the MicroPython firmware to your ESP32 use:
 $ make deploy
 ```
 
-The default ESP32 board build by the above commands is the `GENERIC` one, which
-should work on most ESP32 modules.  You can specify a different board by passing
-`BOARD=<board>` to the make commands, for example:
+The default ESP32 board build by the above commands is the `ESP32_GENERIC`
+one, which should work on most ESP32 modules.  You can specify a different
+board by passing `BOARD=<board>` to the make commands, for example:
 
 ```bash
-$ make BOARD=GENERIC_SPIRAM
+$ make BOARD=ESP32_GENERIC_S3
 ```
 
 Note: the above "make" commands are thin wrappers for the underlying `idf.py`
@@ -137,10 +137,25 @@ for example:
 
 ```bash
 $ idf.py build
-$ idf.py -D MICROPY_BOARD=GENERIC_SPIRAM build
+$ idf.py -D MICROPY_BOARD=ESP32_GENERIC build
 $ idf.py flash
 ```
 
+Some boards also support "variants", which are allow for small variations of
+an otherwise similar board. For example different flash sizes or features. For
+example to build the `OTA` variant of `ESP32_GENERIC`.
+
+```bash
+$ make BOARD=ESP32_GENERIC BOARD_VARIANT=OTA
+```
+
+or to enable octal-SPIRAM support for the `ESP32_GENERIC_S3` board:
+
+```bash
+$ make BOARD=ESP32_GENERIC BOARD_VARIANT=SPIRAM_OCT
+```
+
+
 Getting a Python prompt on the device
 -------------------------------------
 
@@ -202,10 +217,10 @@ antenna = machine.Pin(16, machine.Pin.OUT, value=0)
 Defining a custom ESP32 board
 -----------------------------
 
-The default ESP-IDF configuration settings are provided by the `GENERIC`
-board definition in the directory `boards/GENERIC`. For a custom configuration
+The default ESP-IDF configuration settings are provided by the `ESP32_GENERIC`
+board definition in the directory `boards/ESP32_GENERIC`. For a custom configuration
 you can define your own board directory.  Start a new board configuration by
-copying an existing one (like `GENERIC`) and modifying it to suit your board.
+copying an existing one (like `ESP32_GENERIC`) and modifying it to suit your board.
 
 MicroPython specific configuration values are defined in the board-specific
 `mpconfigboard.h` file, which is included by `mpconfigport.h`.  Additional

ports/esp32/boards/ESP32_GENERIC/mpconfigboard.cmake

@@ -6,7 +6,7 @@ set(SDKCONFIG_DEFAULTS
 if(MICROPY_BOARD_VARIANT STREQUAL "D2WD")
     set(SDKCONFIG_DEFAULTS
         ${SDKCONFIG_DEFAULTS}
-        boards/GENERIC/sdkconfig.d2wd
+        boards/ESP32_GENERIC/sdkconfig.d2wd
     )
 
     list(APPEND MICROPY_DEF_BOARD
@@ -17,7 +17,7 @@ endif()
 if(MICROPY_BOARD_VARIANT STREQUAL "OTA")
     set(SDKCONFIG_DEFAULTS
         ${SDKCONFIG_DEFAULTS}
-        boards/GENERIC/sdkconfig.ota
+        boards/ESP32_GENERIC/sdkconfig.ota
     )
 
     list(APPEND MICROPY_DEF_BOARD
@@ -39,7 +39,7 @@ endif()
 if(MICROPY_BOARD_VARIANT STREQUAL "UNICORE")
     set(SDKCONFIG_DEFAULTS
         ${SDKCONFIG_DEFAULTS}
-        boards/GENERIC/sdkconfig.unicore
+        boards/ESP32_GENERIC/sdkconfig.unicore
     )
 
     list(APPEND MICROPY_DEF_BOARD

ports/esp32/boards/ESP32_GENERIC_C3/mpconfigboard.cmake

@@ -3,5 +3,5 @@ set(IDF_TARGET esp32c3)
 set(SDKCONFIG_DEFAULTS
     boards/sdkconfig.base
     boards/sdkconfig.ble
-    boards/GENERIC_C3/sdkconfig.c3usb
+    boards/ESP32_GENERIC_C3/sdkconfig.c3usb
 )

ports/esp32/boards/ESP32_GENERIC_S3/mpconfigboard.cmake

@@ -5,7 +5,7 @@ set(SDKCONFIG_DEFAULTS
     boards/sdkconfig.usb
     boards/sdkconfig.ble
     boards/sdkconfig.spiram_sx
-    boards/GENERIC_S3/sdkconfig.board
+    boards/ESP32_GENERIC_S3/sdkconfig.board
 )
 
 if(MICROPY_BOARD_VARIANT STREQUAL "SPIRAM_OCT")

tools/ci.sh

@@ -129,9 +129,9 @@ function ci_esp32_build {
     make ${MAKEOPTS} -C ports/esp32 \
         USER_C_MODULES=../../../examples/usercmodule/micropython.cmake \
         FROZEN_MANIFEST=$(pwd)/ports/esp32/boards/manifest_test.py
-    make ${MAKEOPTS} -C ports/esp32 BOARD=GENERIC_C3
-    make ${MAKEOPTS} -C ports/esp32 BOARD=GENERIC_S2
-    make ${MAKEOPTS} -C ports/esp32 BOARD=GENERIC_S3
+    make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_C3
+    make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_S2
+    make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_S3
 
     # Test building native .mpy with xtensawin architecture.
     ci_native_mpy_modules_build xtensawin