cc3200: Fix I2C and SPI module references.

cc3200/mods/pybi2c.c

@@ -56,10 +56,10 @@
 ///
 ///     from pyb import I2C
 ///
-///     i2c = I2C(1)                            # create
-///     i2c = I2C(1, 50000)                     # create and init with a 50KHz baudrate
-///     i2c.init(100000)                        # init with a 100KHz baudrate
-///     i2c.deinit()                            # turn off the peripheral
+///     i2c = I2C(1)                               # create
+///     i2c = I2C(1, I2C.MASTER, baudrate=50000)   # create and init with a 50KHz baudrate
+///     i2c.init(I2C.MASTER, baudrate=100000)      # init with a 100KHz baudrate
+///     i2c.deinit()                               # turn off the peripheral
 ///
 /// Printing the i2c object gives you information about its configuration.
 ///
@@ -76,7 +76,6 @@
 ///
 /// A master must specify the recipient's address:
 ///
-///     i2c.init(1, 100000)
 ///     i2c.send('123', 0x42)        # send 3 bytes to slave with address 0x42
 ///     i2c.send(b'456', addr=0x42)  # keyword for address
 ///

cc3200/mods/pybspi.c

@@ -54,7 +54,7 @@
 /// parameters to init the SPI bus:
 ///
 ///     from pyb import SPI
-///     spi = SPI(2000000, bits=8, polarity=0, phase=0, nss=SPI.ACTIVE_LOW)
+///     spi = SPI(1, SPI.MASTER, baudrate=2000000, bits=8, polarity=0, phase=0, nss=SPI.ACTIVE_LOW)
 ///
 /// Only required parameter is the baudrate, in Hz. polarity and phase may be 0 or 1.
 /// Bit accepts 8, 16, 32. Chip select values are ACTIVE_LOW and ACTIVE_HIGH