mimxrt: Remove SDCARD Makefile config option.

This is option is no longer needed as a Makefile option as the USDHC driver is enabled for all supported series. Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-09-05 15:19:46 +02:00 · 2023-09-05 15:19:46 +02:00 · 552b0bbe12
commit 552b0bbe12
--- a/ports/mimxrt/Makefile
+++ b/ports/mimxrt/Makefile
@ -331,7 +331,6 @@ endif
 # Set default values for optional variables
 MICROPY_HW_SDRAM_AVAIL ?= 0
 MICROPY_HW_SDRAM_SIZE ?= 0
-MICROPY_PY_MACHINE_SDCARD ?= 0

 # Configure default compiler flags
 CFLAGS += \
@ -351,7 +350,6 @@ CFLAGS += \
 	-DMICROPY_HW_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE) \
 	-DMICROPY_HW_SDRAM_AVAIL=$(MICROPY_HW_SDRAM_AVAIL) \
 	-DMICROPY_HW_SDRAM_SIZE=$(MICROPY_HW_SDRAM_SIZE) \
-	-DMICROPY_PY_MACHINE_SDCARD=$(MICROPY_PY_MACHINE_SDCARD) \
 	-DSPI_RETRY_TIMES=1000000 \
 	-DUART_RETRY_TIMES=1000000 \
 	-DXIP_BOOT_HEADER_ENABLE=1 \
--- a/ports/mimxrt/boards/ADAFRUIT_METRO_M7/mpconfigboard.h
+++ b/ports/mimxrt/boards/ADAFRUIT_METRO_M7/mpconfigboard.h
@ -7,6 +7,7 @@
 #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))

 #define MICROPY_HW_NUM_PIN_IRQS (2 * 32)
+#define MICROPY_HW_ENABLE_SDCARD    (0)

 // Define mapping logical UART # to hardware UART #
 // LPUART1 on USB_DBG  -> 0
--- a/ports/mimxrt/boards/ADAFRUIT_METRO_M7/mpconfigboard.mk
+++ b/ports/mimxrt/boards/ADAFRUIT_METRO_M7/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1011
 MCU_VARIANT = MIMXRT1011DAE5A

 MICROPY_FLOAT_IMPL = single
-MICROPY_PY_MACHINE_SDCARD = 0
 MICROPY_HW_FLASH_TYPE ?= qspi_nor_flash
 MICROPY_HW_FLASH_SIZE ?= 0x800000  # 8MB

--- a/ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.h
+++ b/ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.h
@ -7,6 +7,7 @@
 #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))

 #define MICROPY_HW_NUM_PIN_IRQS (2 * 32)
+#define MICROPY_HW_ENABLE_SDCARD    (0)

 // Define mapping logical UART # to hardware UART #
 // LPUART1 on USB_DBG  -> 0
--- a/ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1011
 MCU_VARIANT = MIMXRT1011DAE5A

 MICROPY_FLOAT_IMPL = single
-MICROPY_PY_MACHINE_SDCARD = 0
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x1000000  # 16MB

--- a/ports/mimxrt/boards/MIMXRT1015_EVK/mpconfigboard.h
+++ b/ports/mimxrt/boards/MIMXRT1015_EVK/mpconfigboard.h
@ -10,6 +10,7 @@
 #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))

 #define MICROPY_HW_NUM_PIN_IRQS (3 * 32)
+#define MICROPY_PY_MACHINE_SDCARD    (0)

 // Define mapping logical UART # to hardware UART #
 // RX/TX      HW-UART    Logical UART
--- a/ports/mimxrt/boards/MIMXRT1015_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1015_EVK/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1015
 MCU_VARIANT = MIMXRT1015DAF5A

 MICROPY_FLOAT_IMPL = single
-MICROPY_PY_MACHINE_SDCARD = 0
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x1000000  # 16MB

--- a/ports/mimxrt/boards/MIMXRT1020_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1020_EVK/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1021
 MCU_VARIANT = MIMXRT1021DAG5A

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x800000  # 8MB

--- a/ports/mimxrt/boards/MIMXRT1050_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1050_EVK/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1052
 MCU_VARIANT = MIMXRT1052DVL6B

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = qspi_hyper_flash
 MICROPY_HW_FLASH_SIZE = 0x4000000  # 64MB

--- a/ports/mimxrt/boards/MIMXRT1060_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1060_EVK/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1062
 MCU_VARIANT = MIMXRT1062DVJ6A

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x800000  # 8MB

--- a/ports/mimxrt/boards/MIMXRT1064_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1064_EVK/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1064
 MCU_VARIANT = MIMXRT1064DVL6A

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = internal
 MICROPY_HW_FLASH_SIZE = 0x400000  # 4MB

--- a/ports/mimxrt/boards/MIMXRT1170_EVK/mpconfigboard.mk
+++ b/ports/mimxrt/boards/MIMXRT1170_EVK/mpconfigboard.mk
@ -3,7 +3,6 @@ MCU_VARIANT = MIMXRT1176DVMAA
 MCU_CORE = _cm7

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE ?= qspi_nor_flash
 MICROPY_HW_FLASH_SIZE ?= 0x1000000  # 16MB
 MICROPY_HW_FLASH_RESERVED ?= 0x100000  # 1MB CM4 Code address space
--- a/ports/mimxrt/boards/OLIMEX_RT1010/mpconfigboard.h
+++ b/ports/mimxrt/boards/OLIMEX_RT1010/mpconfigboard.h
@ -11,6 +11,7 @@
 #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))

 #define MICROPY_HW_NUM_PIN_IRQS (2 * 32)
+#define MICROPY_PY_MACHINE_SDCARD    (0)

 // Define mapping logical UART # to hardware UART #
 // LPUART1 on RX/TX    -> 1
--- a/ports/mimxrt/boards/OLIMEX_RT1010/mpconfigboard.mk
+++ b/ports/mimxrt/boards/OLIMEX_RT1010/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1011
 MCU_VARIANT = MIMXRT1011DAE5A

 MICROPY_FLOAT_IMPL = single
-MICROPY_PY_MACHINE_SDCARD ?= 0
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x200000  # 2MB
 MICROPY_HW_FLASH_RESERVED ?= 0x1000  # 4KB
--- a/ports/mimxrt/boards/SEEED_ARCH_MIX/mpconfigboard.mk
+++ b/ports/mimxrt/boards/SEEED_ARCH_MIX/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1052
 MCU_VARIANT = MIMXRT1052DVL6B

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x800000  # 8MB
 	
--- a/ports/mimxrt/boards/TEENSY40/mpconfigboard.mk
+++ b/ports/mimxrt/boards/TEENSY40/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1062
 MCU_VARIANT = MIMXRT1062DVJ6A

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x200000  # 2MB
 MICROPY_HW_FLASH_RESERVED ?= 0x1000  # 4KB
--- a/ports/mimxrt/boards/TEENSY41/mpconfigboard.mk
+++ b/ports/mimxrt/boards/TEENSY41/mpconfigboard.mk
@ -2,7 +2,6 @@ MCU_SERIES = MIMXRT1062
 MCU_VARIANT = MIMXRT1062DVJ6A

 MICROPY_FLOAT_IMPL = double
-MICROPY_PY_MACHINE_SDCARD = 1
 MICROPY_HW_FLASH_TYPE = qspi_nor_flash
 MICROPY_HW_FLASH_SIZE = 0x800000  # 8MB
 MICROPY_HW_FLASH_RESERVED ?= 0x1000  # 4KB
--- a/ports/mimxrt/machine_sdcard.c
+++ b/ports/mimxrt/machine_sdcard.c
@ -24,11 +24,12 @@
 * THE SOFTWARE.
 */

-#if MICROPY_PY_MACHINE_SDCARD
-
 #include "py/runtime.h"
 #include "py/mperrno.h"
 #include "extmod/vfs.h"
+
+#if MICROPY_PY_MACHINE_SDCARD
+
 #include "ticks.h"

 #if defined(MIMXRT1170x_SERIES)
--- a/ports/mimxrt/mpconfigport.h
+++ b/ports/mimxrt/mpconfigport.h
@ -87,6 +87,9 @@ uint32_t trng_random_u32(void);
 #ifndef MICROPY_PY_MACHINE_I2S
 #define MICROPY_PY_MACHINE_I2S              (0)
 #endif
+#ifndef MICROPY_PY_MACHINE_SDCARD
+#define MICROPY_PY_MACHINE_SDCARD           (1)
+#endif
 #define MICROPY_PY_MACHINE_SOFTI2C          (1)
 #define MICROPY_PY_MACHINE_SPI              (1)
 #define MICROPY_PY_MACHINE_SOFTSPI          (1)
--- a/ports/mimxrt/sdcard.c
+++ b/ports/mimxrt/sdcard.c
@ -24,6 +24,8 @@
 * THE SOFTWARE.
 */

+#include "py/mphal.h"
+
 #if MICROPY_PY_MACHINE_SDCARD

 #include "sdcard.h"