kopia lustrzana https://github.com/micropython/micropython
Add Initial Support for STM32F4DISCOVERY Board
* Add a TARGET definition to Makefile (default PYBOARD). * Add support for discovery LEDs in led module. * Add support for discovery user switch in usersw * Add EXTI interrupt handler for discovery user switch on (PA0). * Parameterize led and usrsw modules pins and port. * Issue #83pull/86/head
mux
rodzic
12e2656472
commit
50d5420deb
|
|
@ -5,12 +5,13 @@ CC3KSRC=cc3k
|
|||
PYSRC=../py
|
||||
BUILD=build
|
||||
DFU=../tools/dfu.py
|
||||
TARGET=PYBOARD
|
||||
|
||||
AS = arm-none-eabi-as
|
||||
CC = arm-none-eabi-gcc
|
||||
LD = arm-none-eabi-ld
|
||||
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion -DSTM32F40XX -DHSE_VALUE=8000000
|
||||
CFLAGS = -I. -I$(PYSRC) -I$(FATFSSRC) -I$(STMSRC) -Wall -ansi -std=gnu99 -Os -DNDEBUG $(CFLAGS_CORTEX_M4)
|
||||
CFLAGS = -I. -I$(PYSRC) -I$(FATFSSRC) -I$(STMSRC) -Wall -ansi -std=gnu99 -Os -DNDEBUG $(CFLAGS_CORTEX_M4) -D$(TARGET)
|
||||
#CFLAGS += -I$(STMOTGSRC) -DUSE_HOST_MODE -DUSE_OTG_MODE
|
||||
LDFLAGS = --nostdlib -T stm32f405.ld
|
||||
|
||||
|
|
|
|||
156
stm/led.c
156
stm/led.c
|
|
@ -7,66 +7,144 @@
|
|||
#include "obj.h"
|
||||
#include "led.h"
|
||||
|
||||
#define PYB_LED_R_PORT (GPIOA)
|
||||
#define PYB_LED_R1_PIN (GPIO_Pin_8)
|
||||
#define PYB_LED_R2_PIN (GPIO_Pin_10)
|
||||
#define PYB_LED_G_PORT (GPIOC)
|
||||
#define PYB_LED_G1_PIN (GPIO_Pin_4)
|
||||
#define PYB_LED_G2_PIN (GPIO_Pin_5)
|
||||
/* LED numbers, used internally */
|
||||
#define PYB_LED_1 (1)
|
||||
#define PYB_LED_2 (2)
|
||||
#define PYB_LED_3 (3)
|
||||
#define PYB_LED_4 (4)
|
||||
|
||||
#if defined(PYBOARD)
|
||||
#define PYB_LED1_PORT (GPIOA)
|
||||
#define PYB_LED1_PIN (GPIO_Pin_8)
|
||||
|
||||
#define PYB_LED2_PORT (GPIOA)
|
||||
#define PYB_LED2_PIN (GPIO_Pin_10)
|
||||
|
||||
#define PYB_LED3_PORT (GPIOC)
|
||||
#define PYB_LED3_PIN (GPIO_Pin_4)
|
||||
|
||||
#define PYB_LED4_PORT (GPIOC)
|
||||
#define PYB_LED4_PIN (GPIO_Pin_5)
|
||||
|
||||
#define PYB_OTYPE (GPIO_OType_OD)
|
||||
|
||||
#define PYB_LED_ON(port, pin) (port->BSRRH = pin)
|
||||
#define PYB_LED_OFF(port, pin) (port->BSRRL = pin)
|
||||
|
||||
#elif defined(STM32F4DISC)
|
||||
#define PYB_LED1_PORT (GPIOD)
|
||||
#define PYB_LED1_PIN (GPIO_Pin_14)
|
||||
|
||||
#define PYB_LED2_PORT (GPIOD)
|
||||
#define PYB_LED2_PIN (GPIO_Pin_12)
|
||||
|
||||
#define PYB_LED3_PORT (GPIOD)
|
||||
#define PYB_LED3_PIN (GPIO_Pin_15)
|
||||
|
||||
#define PYB_LED4_PORT (GPIOD)
|
||||
#define PYB_LED4_PIN (GPIO_Pin_13)
|
||||
|
||||
#define PYB_OTYPE (GPIO_OType_PP)
|
||||
|
||||
#define PYB_LED_ON(port, pin) (port->BSRRL = pin)
|
||||
#define PYB_LED_OFF(port, pin) (port->BSRRH = pin)
|
||||
#endif
|
||||
|
||||
void led_init(void) {
|
||||
// set the output high (so LED is off)
|
||||
PYB_LED_R_PORT->BSRRL = PYB_LED_R1_PIN;
|
||||
PYB_LED_R_PORT->BSRRL = PYB_LED_R2_PIN;
|
||||
PYB_LED_G_PORT->BSRRL = PYB_LED_G1_PIN;
|
||||
PYB_LED_G_PORT->BSRRL = PYB_LED_G2_PIN;
|
||||
// make them open drain outputs
|
||||
/* GPIO structure */
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_LED_R1_PIN | PYB_LED_R2_PIN;
|
||||
|
||||
/* Configure I/O speed, mode, output type and pull */
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(PYB_LED_R_PORT, &GPIO_InitStructure);
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_LED_G1_PIN | PYB_LED_G2_PIN;
|
||||
GPIO_Init(PYB_LED_G_PORT, &GPIO_InitStructure);
|
||||
GPIO_InitStructure.GPIO_OType = PYB_OTYPE;
|
||||
|
||||
/* Turn off LEDs */
|
||||
PYB_LED_OFF(PYB_LED1_PORT, PYB_LED1_PIN);
|
||||
PYB_LED_OFF(PYB_LED2_PORT, PYB_LED2_PIN);
|
||||
PYB_LED_OFF(PYB_LED3_PORT, PYB_LED1_PIN);
|
||||
PYB_LED_OFF(PYB_LED4_PORT, PYB_LED2_PIN);
|
||||
|
||||
/* Initialize LEDs */
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_LED1_PIN;
|
||||
GPIO_Init(PYB_LED1_PORT, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_LED2_PIN;
|
||||
GPIO_Init(PYB_LED2_PORT, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_LED3_PIN;
|
||||
GPIO_Init(PYB_LED3_PORT, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_LED4_PIN;
|
||||
GPIO_Init(PYB_LED4_PORT, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
void led_state(pyb_led_t led, int state) {
|
||||
GPIO_TypeDef *port;
|
||||
uint32_t pin;
|
||||
|
||||
switch (led) {
|
||||
case PYB_LED_R1: port = PYB_LED_R_PORT; pin = PYB_LED_R1_PIN; break;
|
||||
case PYB_LED_R2: port = PYB_LED_R_PORT; pin = PYB_LED_R2_PIN; break;
|
||||
case PYB_LED_G1: port = PYB_LED_G_PORT; pin = PYB_LED_G1_PIN; break;
|
||||
case PYB_LED_G2: port = PYB_LED_G_PORT; pin = PYB_LED_G2_PIN; break;
|
||||
default: return;
|
||||
case PYB_LED_1:
|
||||
pin = PYB_LED1_PIN;
|
||||
port = PYB_LED1_PORT;
|
||||
break;
|
||||
case PYB_LED_2:
|
||||
pin = PYB_LED2_PIN;
|
||||
port = PYB_LED2_PORT;
|
||||
break;
|
||||
case PYB_LED_3:
|
||||
pin = PYB_LED3_PIN;
|
||||
port = PYB_LED3_PORT;
|
||||
break;
|
||||
case PYB_LED_4:
|
||||
pin = PYB_LED4_PIN;
|
||||
port = PYB_LED4_PORT;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
if (state == 0) {
|
||||
// turn LED off (output is high)
|
||||
port->BSRRL = pin;
|
||||
// turn LED off
|
||||
PYB_LED_OFF(port, pin);
|
||||
} else {
|
||||
// turn LED on (output is low)
|
||||
port->BSRRH = pin;
|
||||
// turn LED on
|
||||
PYB_LED_ON(port, pin);
|
||||
}
|
||||
}
|
||||
|
||||
void led_toggle(pyb_led_t led) {
|
||||
GPIO_TypeDef *port;
|
||||
uint32_t pin;
|
||||
|
||||
switch (led) {
|
||||
case PYB_LED_R1: port = PYB_LED_R_PORT; pin = PYB_LED_R1_PIN; break;
|
||||
case PYB_LED_R2: port = PYB_LED_R_PORT; pin = PYB_LED_R2_PIN; break;
|
||||
case PYB_LED_G1: port = PYB_LED_G_PORT; pin = PYB_LED_G1_PIN; break;
|
||||
case PYB_LED_G2: port = PYB_LED_G_PORT; pin = PYB_LED_G2_PIN; break;
|
||||
default: return;
|
||||
case PYB_LED_1:
|
||||
pin = PYB_LED1_PIN;
|
||||
port = PYB_LED1_PORT;
|
||||
break;
|
||||
case PYB_LED_2:
|
||||
pin = PYB_LED2_PIN;
|
||||
port = PYB_LED2_PORT;
|
||||
break;
|
||||
case PYB_LED_3:
|
||||
pin = PYB_LED3_PIN;
|
||||
port = PYB_LED3_PORT;
|
||||
break;
|
||||
case PYB_LED_4:
|
||||
pin = PYB_LED4_PIN;
|
||||
port = PYB_LED4_PORT;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
if (!(port->ODR & pin)) {
|
||||
// turn LED off (output high)
|
||||
port->BSRRL = pin;
|
||||
// turn LED off
|
||||
PYB_LED_OFF(port, pin);
|
||||
} else {
|
||||
// turn LED on (output low)
|
||||
port->BSRRH = pin;
|
||||
PYB_LED_ON(port, pin);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -85,19 +163,13 @@ void led_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp
|
|||
|
||||
mp_obj_t led_obj_on(mp_obj_t self_in) {
|
||||
pyb_led_obj_t *self = self_in;
|
||||
switch (self->led_id) {
|
||||
case 1: led_state(PYB_LED_G1, 1); break;
|
||||
case 2: led_state(PYB_LED_G2, 1); break;
|
||||
}
|
||||
led_state(self->led_id, 1);
|
||||
return mp_const_none;
|
||||
}
|
||||
|
||||
mp_obj_t led_obj_off(mp_obj_t self_in) {
|
||||
pyb_led_obj_t *self = self_in;
|
||||
switch (self->led_id) {
|
||||
case 1: led_state(PYB_LED_G1, 0); break;
|
||||
case 2: led_state(PYB_LED_G2, 0); break;
|
||||
}
|
||||
led_state(self->led_id, 0);
|
||||
return mp_const_none;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -3,6 +3,11 @@ typedef enum {
|
|||
PYB_LED_R2 = 1,
|
||||
PYB_LED_G1 = 2,
|
||||
PYB_LED_G2 = 3,
|
||||
//STM32F4DISC
|
||||
PYB_LED_R = 0,
|
||||
PYB_LED_G = 1,
|
||||
PYB_LED_B = 2,
|
||||
PYB_LED_O = 3,
|
||||
} pyb_led_t;
|
||||
|
||||
void led_init(void);
|
||||
|
|
|
|||
|
|
@ -298,4 +298,10 @@ void EXTI15_10_IRQHandler(void) {
|
|||
}
|
||||
}
|
||||
|
||||
#if defined(STM32F4DISC)
|
||||
void EXTI0_IRQHandler(void) {
|
||||
// clear pending interrupt bit
|
||||
EXTI_ClearITPendingBit(EXTI_Line0);
|
||||
}
|
||||
#endif
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
|
|||
51
stm/usrsw.c
51
stm/usrsw.c
|
|
@ -9,36 +9,50 @@
|
|||
#include "obj.h"
|
||||
#include "usrsw.h"
|
||||
|
||||
#define PYB_USRSW_PORT (GPIOA)
|
||||
#define PYB_USRSW_PIN (GPIO_Pin_13)
|
||||
|
||||
#if defined (PYBOARD)
|
||||
#define USRSW_PORT (GPIOA)
|
||||
#define USRSW_PIN (GPIO_Pin_13)
|
||||
#define USRSW_EXTI_PIN (EXTI_PinSource13)
|
||||
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOA)
|
||||
#define USRSW_EXTI_LINE (EXTI_Line13)
|
||||
#define USRSW_EXTI_IRQN (EXTI15_10_IRQn)
|
||||
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
|
||||
#elif defined (STM32F4DISC)
|
||||
#define USRSW_PORT (GPIOA)
|
||||
#define USRSW_PIN (GPIO_Pin_0)
|
||||
#define USRSW_EXTI_PIN (EXTI_PinSource0)
|
||||
#define USRSW_EXTI_PORT (EXTI_PortSourceGPIOA)
|
||||
#define USRSW_EXTI_LINE (EXTI_Line0)
|
||||
#define USRSW_EXTI_IRQN (EXTI0_IRQn)
|
||||
#define USRSW_EXTI_EDGE (EXTI_Trigger_Falling)
|
||||
#endif
|
||||
void switch_init(void) {
|
||||
// make it an input with pull-up
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
GPIO_InitStructure.GPIO_Pin = PYB_USRSW_PIN;
|
||||
GPIO_InitStructure.GPIO_Pin = USRSW_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
||||
GPIO_Init(PYB_USRSW_PORT, &GPIO_InitStructure);
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; /* allow external pull up/down */
|
||||
GPIO_Init(USRSW_PORT, &GPIO_InitStructure);
|
||||
|
||||
// the rest does the EXTI interrupt
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
|
||||
|
||||
/* Connect EXTI Line13 to PA13 pin */
|
||||
SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOA, EXTI_PinSource13);
|
||||
/* Connect EXTI Line to GPIO pin */
|
||||
SYSCFG_EXTILineConfig(USRSW_EXTI_PORT, USRSW_EXTI_PIN);
|
||||
|
||||
/* Configure EXTI Line13, rising edge */
|
||||
/* Configure EXTI Line */
|
||||
EXTI_InitTypeDef EXTI_InitStructure;
|
||||
EXTI_InitStructure.EXTI_Line = EXTI_Line13;
|
||||
EXTI_InitStructure.EXTI_Line = USRSW_EXTI_LINE;
|
||||
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
|
||||
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
|
||||
EXTI_InitStructure.EXTI_Trigger = USRSW_EXTI_EDGE;
|
||||
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
|
||||
EXTI_Init(&EXTI_InitStructure);
|
||||
|
||||
/* Enable and set EXTI15_10 Interrupt to the lowest priority */
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USRSW_EXTI_IRQN;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
|
|
@ -46,13 +60,24 @@ void switch_init(void) {
|
|||
}
|
||||
|
||||
int switch_get(void) {
|
||||
if (PYB_USRSW_PORT->IDR & PYB_USRSW_PIN) {
|
||||
#if defined (PYBOARD)
|
||||
if (USRSW_PORT->IDR & USRSW_PIN) {
|
||||
// pulled high, so switch is not pressed
|
||||
return 0;
|
||||
} else {
|
||||
// pulled low, so switch is pressed
|
||||
return 1;
|
||||
}
|
||||
#elif defined (STM32F4DISC)
|
||||
/* switch pulled down */
|
||||
if (USRSW_PORT->IDR & USRSW_PIN) {
|
||||
// pulled high, so switch is pressed
|
||||
return 1;
|
||||
} else {
|
||||
// pulled low, so switch is not pressed
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue