diff --git a/esp8266/esp_mphal.c b/esp8266/esp_mphal.c
index 45f7f5c0fd..9f090a0973 100644
--- a/esp8266/esp_mphal.c
+++ b/esp8266/esp_mphal.c
@@ -216,7 +216,7 @@ void mp_hal_signal_dupterm_input(void) {
     system_os_post(DUPTERM_TASK_ID, 0, 0);
 }
 
-void mp_hal_pin_config_od(mp_hal_pin_obj_t pin_id) {
+void mp_hal_pin_open_drain(mp_hal_pin_obj_t pin_id) {
     const pyb_pin_obj_t *pin = &pyb_pin_obj[pin_id];
 
     if (pin->phys_port == 16) {
diff --git a/esp8266/esp_mphal.h b/esp8266/esp_mphal.h
index 0de494300a..866a5a94bd 100644
--- a/esp8266/esp_mphal.h
+++ b/esp8266/esp_mphal.h
@@ -70,8 +70,8 @@ void ets_event_poll(void);
 #define mp_hal_get_pin_obj(o) mp_obj_get_pin(o)
 void mp_hal_pin_input(mp_hal_pin_obj_t pin);
 void mp_hal_pin_output(mp_hal_pin_obj_t pin);
-void mp_hal_pin_config_od(mp_hal_pin_obj_t pin);
-#define mp_hal_pin_low(p) do { \
+void mp_hal_pin_open_drain(mp_hal_pin_obj_t pin);
+#define mp_hal_pin_od_low(p) do { \
         if ((p) == 16) { WRITE_PERI_REG(RTC_GPIO_ENABLE, (READ_PERI_REG(RTC_GPIO_ENABLE) & ~1) | 1); } \
         else { gpio_output_set(0, 1 << (p), 1 << (p), 0); } \
     } while (0)
diff --git a/extmod/machine_i2c.c b/extmod/machine_i2c.c
index e3bdb36925..ceddf0730e 100644
--- a/extmod/machine_i2c.c
+++ b/extmod/machine_i2c.c
@@ -48,7 +48,7 @@ STATIC void mp_hal_i2c_delay(machine_i2c_obj_t *self) {
 }
 
 STATIC void mp_hal_i2c_scl_low(machine_i2c_obj_t *self) {
-    mp_hal_pin_low(self->scl);
+    mp_hal_pin_od_low(self->scl);
 }
 
 STATIC void mp_hal_i2c_scl_release(machine_i2c_obj_t *self) {
@@ -56,7 +56,7 @@ STATIC void mp_hal_i2c_scl_release(machine_i2c_obj_t *self) {
 }
 
 STATIC void mp_hal_i2c_sda_low(machine_i2c_obj_t *self) {
-    mp_hal_pin_low(self->sda);
+    mp_hal_pin_od_low(self->sda);
 }
 
 STATIC void mp_hal_i2c_sda_release(machine_i2c_obj_t *self) {
@@ -91,8 +91,8 @@ STATIC void mp_hal_i2c_init(machine_i2c_obj_t *self, uint32_t freq) {
     if (self->us_delay == 0) {
         self->us_delay = 1;
     }
-    mp_hal_pin_config_od(self->scl);
-    mp_hal_pin_config_od(self->sda);
+    mp_hal_pin_open_drain(self->scl);
+    mp_hal_pin_open_drain(self->sda);
     mp_hal_i2c_stop(self);
 }
 
diff --git a/stmhal/mphalport.h b/stmhal/mphalport.h
index 7b29f9c9c0..b155d9616e 100644
--- a/stmhal/mphalport.h
+++ b/stmhal/mphalport.h
@@ -45,7 +45,7 @@ void mp_hal_set_interrupt_char(int c); // -1 to disable
 #include "stmhal/pin.h"
 #define mp_hal_pin_obj_t pin_obj_t*
 #define mp_hal_get_pin_obj(o) (pin_obj_t*)pin_find(o)
-#define mp_hal_pin_config_od(p) mp_hal_gpio_config((p)->gpio, (p)->pin, 5, 0, 0)
-#define mp_hal_pin_low(p) GPIO_clear_pin((p)->gpio, (p)->pin_mask)
+#define mp_hal_pin_open_drain(p) mp_hal_gpio_config((p)->gpio, (p)->pin, 5, 0, 0)
+#define mp_hal_pin_od_low(p) GPIO_clear_pin((p)->gpio, (p)->pin_mask)
 #define mp_hal_pin_od_high(p) GPIO_set_pin((p)->gpio, (p)->pin_mask)
 #define mp_hal_pin_read(p) GPIO_read_pin((p)->gpio, (p)->pin)