micropython/ports/stm32/sdram.c

/*
 * This file is part of the OpenMV project.
 * Copyright (c) 2013/2014 Ibrahim Abdelkader <i.abdalkader@gmail.com>
 * This work is licensed under the MIT license, see the file LICENSE for details.
 *
 * SDRAM Driver.
 *
 */
#include <stdio.h>
#include <stdbool.h>
#include <string.h>
#include "py/runtime.h"
#include "py/mphal.h"
#include "pin.h"
#include "pin_static_af.h"
#include "systick.h"
#include "sdram.h"

#define SDRAM_TIMEOUT                            ((uint32_t)0xFFFF)
#define SDRAM_MODEREG_BURST_LENGTH_1             ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_LENGTH_2             ((uint16_t)0x0001)
#define SDRAM_MODEREG_BURST_LENGTH_4             ((uint16_t)0x0002)
#define SDRAM_MODEREG_BURST_LENGTH_8             ((uint16_t)0x0004)
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL      ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED     ((uint16_t)0x0008)
#define SDRAM_MODEREG_CAS_LATENCY_2              ((uint16_t)0x0020)
#define SDRAM_MODEREG_CAS_LATENCY_3              ((uint16_t)0x0030)
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD    ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE     ((uint16_t)0x0200)

#if defined(MICROPY_HW_FMC_SDCKE0) && defined(MICROPY_HW_FMC_SDNE0)
#define FMC_SDRAM_BANK FMC_SDRAM_BANK1
#define FMC_SDRAM_CMD_TARGET_BANK FMC_SDRAM_CMD_TARGET_BANK1
#define SDRAM_START_ADDRESS 0xC0000000
#elif defined(MICROPY_HW_FMC_SDCKE1) && defined(MICROPY_HW_FMC_SDNE1)
#define FMC_SDRAM_BANK FMC_SDRAM_BANK2
#define FMC_SDRAM_CMD_TARGET_BANK FMC_SDRAM_CMD_TARGET_BANK2
#define SDRAM_START_ADDRESS 0xD0000000
#endif

#ifdef FMC_SDRAM_BANK

static void sdram_init_seq(SDRAM_HandleTypeDef
        *hsdram, FMC_SDRAM_CommandTypeDef *command);
extern void __fatal_error(const char *msg);

bool sdram_init(void) {
    SDRAM_HandleTypeDef hsdram;
    FMC_SDRAM_TimingTypeDef SDRAM_Timing;
    FMC_SDRAM_CommandTypeDef command;

    __HAL_RCC_FMC_CLK_ENABLE();

    #if defined(MICROPY_HW_FMC_SDCKE0)
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDCKE0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDCKE0);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDNE0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDNE0);

    #elif defined(MICROPY_HW_FMC_SDCKE1)
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDCKE1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDCKE1);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDNE1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDNE1);
    #endif

    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDCLK, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDCLK);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDNCAS, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDNCAS);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDNRAS, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDNRAS);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_SDNWE, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_SDNWE);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_BA0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_BA0);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_BA1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_BA1);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_NBL0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_NBL0);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_NBL1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_NBL1);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A0);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A1);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A2, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A2);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A3, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A3);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A4, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A4);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A5, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A5);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A6, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A6);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A7, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A7);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A8, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A8);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A9, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A9);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A10, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A10);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A11, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A11);
    #ifdef MICROPY_HW_FMC_A12
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_A12, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_A12);
    #endif
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D0);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D1);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D2, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D2);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D3, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D3);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D4, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D4);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D5, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D5);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D6, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D6);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D7, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D7);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D8, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D8);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D9, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D9);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D10, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D10);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D11, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D11);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D12, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D12);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D13, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D13);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D14, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D14);
    mp_hal_pin_config_alt_static(MICROPY_HW_FMC_D15, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_NONE, STATIC_AF_FMC_D15);

    /* SDRAM device configuration */
    hsdram.Instance = FMC_SDRAM_DEVICE;
    /* Timing configuration for 90 Mhz of SD clock frequency (180Mhz/2) */
    /* TMRD: 2 Clock cycles */
    SDRAM_Timing.LoadToActiveDelay    = MICROPY_HW_SDRAM_TIMING_TMRD;
    /* TXSR: min=70ns (6x11.90ns) */
    SDRAM_Timing.ExitSelfRefreshDelay = MICROPY_HW_SDRAM_TIMING_TXSR;
    /* TRAS */
    SDRAM_Timing.SelfRefreshTime      = MICROPY_HW_SDRAM_TIMING_TRAS;
    /* TRC */
    SDRAM_Timing.RowCycleDelay        = MICROPY_HW_SDRAM_TIMING_TRC;
    /* TWR */
    SDRAM_Timing.WriteRecoveryTime    = MICROPY_HW_SDRAM_TIMING_TWR;
    /* TRP */
    SDRAM_Timing.RPDelay              = MICROPY_HW_SDRAM_TIMING_TRP;
    /* TRCD */
    SDRAM_Timing.RCDDelay             = MICROPY_HW_SDRAM_TIMING_TRCD;

    #define _FMC_INIT(x, n) x ## _ ## n
    #define FMC_INIT(x, n) _FMC_INIT(x,  n)

    hsdram.Init.SDBank             = FMC_SDRAM_BANK;
    hsdram.Init.ColumnBitsNumber   = FMC_INIT(FMC_SDRAM_COLUMN_BITS_NUM, MICROPY_HW_SDRAM_COLUMN_BITS_NUM);
    hsdram.Init.RowBitsNumber      = FMC_INIT(FMC_SDRAM_ROW_BITS_NUM, MICROPY_HW_SDRAM_ROW_BITS_NUM);
    hsdram.Init.MemoryDataWidth    = FMC_INIT(FMC_SDRAM_MEM_BUS_WIDTH, MICROPY_HW_SDRAM_MEM_BUS_WIDTH);
    hsdram.Init.InternalBankNumber = FMC_INIT(FMC_SDRAM_INTERN_BANKS_NUM, MICROPY_HW_SDRAM_INTERN_BANKS_NUM);
    hsdram.Init.CASLatency         = FMC_INIT(FMC_SDRAM_CAS_LATENCY, MICROPY_HW_SDRAM_CAS_LATENCY);
    hsdram.Init.SDClockPeriod      = FMC_INIT(FMC_SDRAM_CLOCK_PERIOD, MICROPY_HW_SDRAM_CLOCK_PERIOD);
    hsdram.Init.ReadPipeDelay      = FMC_INIT(FMC_SDRAM_RPIPE_DELAY, MICROPY_HW_SDRAM_RPIPE_DELAY);
    hsdram.Init.ReadBurst          = (MICROPY_HW_SDRAM_RBURST) ? FMC_SDRAM_RBURST_ENABLE : FMC_SDRAM_RBURST_DISABLE;
    hsdram.Init.WriteProtection    = (MICROPY_HW_SDRAM_WRITE_PROTECTION) ? FMC_SDRAM_WRITE_PROTECTION_ENABLE : FMC_SDRAM_WRITE_PROTECTION_DISABLE;

    /* Initialize the SDRAM controller */
    if(HAL_SDRAM_Init(&hsdram, &SDRAM_Timing) != HAL_OK) {
        return false;
    }

    sdram_init_seq(&hsdram, &command);
    return true;
}

void *sdram_start(void) {
    return (void*)SDRAM_START_ADDRESS;
}

void *sdram_end(void) {
    return (void*)(SDRAM_START_ADDRESS + MICROPY_HW_SDRAM_SIZE);
}

static void sdram_init_seq(SDRAM_HandleTypeDef
        *hsdram, FMC_SDRAM_CommandTypeDef *command)
{
    /* Program the SDRAM external device */
    __IO uint32_t tmpmrd =0;

    /* Step 3:  Configure a clock configuration enable command */
    command->CommandMode           = FMC_SDRAM_CMD_CLK_ENABLE;
    command->CommandTarget         = FMC_SDRAM_CMD_TARGET_BANK;
    command->AutoRefreshNumber     = 1;
    command->ModeRegisterDefinition = 0;

    /* Send the command */
    HAL_SDRAM_SendCommand(hsdram, command, 0x1000);

    /* Step 4: Insert 100 ms delay */
    HAL_Delay(100);

    /* Step 5: Configure a PALL (precharge all) command */
    command->CommandMode           = FMC_SDRAM_CMD_PALL;
    command->CommandTarget         = FMC_SDRAM_CMD_TARGET_BANK;
    command->AutoRefreshNumber     = 1;
    command->ModeRegisterDefinition = 0;

    /* Send the command */
    HAL_SDRAM_SendCommand(hsdram, command, 0x1000);

    /* Step 6 : Configure a Auto-Refresh command */
    command->CommandMode           = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
    command->CommandTarget         = FMC_SDRAM_CMD_TARGET_BANK;
    command->AutoRefreshNumber     = 4;
    command->ModeRegisterDefinition = 0;

    /* Send the command */
    HAL_SDRAM_SendCommand(hsdram, command, 0x1000);

    /* Step 7: Program the external memory mode register */
    tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2   |
        SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL   |
        FMC_INIT(SDRAM_MODEREG_CAS_LATENCY, MICROPY_HW_SDRAM_CAS_LATENCY) |
        SDRAM_MODEREG_OPERATING_MODE_STANDARD |
        SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;

    command->CommandMode           = FMC_SDRAM_CMD_LOAD_MODE;
    command->CommandTarget         = FMC_SDRAM_CMD_TARGET_BANK;
    command->AutoRefreshNumber     = 1;
    command->ModeRegisterDefinition = tmpmrd;

    /* Send the command */
    HAL_SDRAM_SendCommand(hsdram, command, 0x1000);

    /* Step 8: Set the refresh rate counter
       RefreshRate = 64 ms / 8192 cyc = 7.8125 us/cyc

       RefreshCycles = 7.8125 us * 90 MHz = 703
       According to the formula on p.1665 of the reference manual,
       we also need to subtract 20 from the value, so the target
       refresh rate is 703 - 20 = 683.
     */
    #define REFRESH_COUNT (MICROPY_HW_SDRAM_REFRESH_RATE * 90000 / 8192 - 20)
    HAL_SDRAM_ProgramRefreshRate(hsdram, REFRESH_COUNT);

    #if defined(STM32F7)
    /* Enable MPU for the SDRAM Memory Region to allow non-aligned
       accesses (hard-fault otherwise)
    */

    MPU_Region_InitTypeDef MPU_InitStruct;

    /* Disable the MPU */
    HAL_MPU_Disable();

    /* Configure the MPU attributes for SDRAM */
    MPU_InitStruct.Enable = MPU_REGION_ENABLE;
    MPU_InitStruct.BaseAddress = SDRAM_START_ADDRESS;
    MPU_InitStruct.Size = MPU_REGION_SIZE_4MB;
    MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
    MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
    MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
    MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
    MPU_InitStruct.Number = MPU_REGION_NUMBER0;
    MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL1;
    MPU_InitStruct.SubRegionDisable = 0x00;
    MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_DISABLE;

    HAL_MPU_ConfigRegion(&MPU_InitStruct);

    /* Enable the MPU */
    HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
    #endif
}

bool __attribute__((optimize("O0"))) sdram_test(bool fast) {
    uint8_t const pattern = 0xaa;
    uint8_t const antipattern = 0x55;
    uint8_t *const mem_base = (uint8_t*)sdram_start();

    /* test data bus */
    for (uint8_t i = 1; i; i <<= 1) {
        *mem_base = i;
        if (*mem_base != i) {
            printf("data bus lines test failed! data (%d)\n", i);
            __asm__ volatile ("BKPT");
        }
    }

    /* test address bus */
    /* Check individual address lines */
    for (uint32_t i = 1; i < MICROPY_HW_SDRAM_SIZE; i <<= 1) {
        mem_base[i] = pattern;
        if (mem_base[i] != pattern) {
            printf("address bus lines test failed! address (%p)\n", &mem_base[i]);
            __asm__ volatile ("BKPT");
        }
    }

    /* Check for aliasing (overlaping addresses) */
    mem_base[0] = antipattern;
    for (uint32_t i = 1; i < MICROPY_HW_SDRAM_SIZE; i <<= 1) {
        if (mem_base[i] != pattern) {
            printf("address bus overlap %p\n", &mem_base[i]);
            __asm__ volatile ("BKPT");
        }
    }

    /* test all ram cells */
    if (!fast) {
        for (uint32_t i = 0; i < MICROPY_HW_SDRAM_SIZE; ++i) {
            mem_base[i] = pattern;
            if (mem_base[i] != pattern) {
                printf("address bus test failed! address (%p)\n", &mem_base[i]);
                __asm__ volatile ("BKPT");
            }
        }
    } else {
        memset(mem_base, pattern, MICROPY_HW_SDRAM_SIZE);
    }

    return true;
}

#endif // FMC_SDRAM_BANK