""" MicroPython Waveshare 7.5" Black/White GDEW075T8 e-paper display driver https://github.com/mcauser/micropython-waveshare-epaper MIT License Copyright (c) 2017 Waveshare Copyright (c) 2018 Mike Causer Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. """ from micropython import const from time import sleep_ms import ustruct # Display resolution EPD_WIDTH = const(640) EPD_HEIGHT = const(384) # Display commands PANEL_SETTING = const(0x00) POWER_SETTING = const(0x01) POWER_OFF = const(0x02) #POWER_OFF_SEQUENCE_SETTING = const(0x03) POWER_ON = const(0x04) #POWER_ON_MEASURE = const(0x05) BOOSTER_SOFT_START = const(0x06) DEEP_SLEEP = const(0x07) DATA_START_TRANSMISSION_1 = const(0x10) #DATA_STOP = const(0x11) DISPLAY_REFRESH = const(0x12) #IMAGE_PROCESS = const(0x13) #LUT_FOR_VCOM = const(0x20) #LUT_BLUE = const(0x21) #LUT_WHITE = const(0x22) #LUT_GRAY_1 = const(0x23) #LUT_GRAY_2 = const(0x24) #LUT_RED_0 = const(0x25) #LUT_RED_1 = const(0x26) #LUT_RED_2 = const(0x27) #LUT_RED_3 = const(0x28) #LUT_XON = const(0x29) PLL_CONTROL = const(0x30) #TEMPERATURE_SENSOR_COMMAND = const(0x40) TEMPERATURE_CALIBRATION = const(0x41) #TEMPERATURE_SENSOR_WRITE = const(0x42) #TEMPERATURE_SENSOR_READ = const(0x43) VCOM_AND_DATA_INTERVAL_SETTING = const(0x50) #LOW_POWER_DETECTION = const(0x51) TCON_SETTING = const(0x60) TCON_RESOLUTION = const(0x61) #SPI_FLASH_CONTROL = const(0x65) #REVISION = const(0x70) #GET_STATUS = const(0x71) #AUTO_MEASUREMENT_VCOM = const(0x80) #READ_VCOM_VALUE = const(0x81) VCM_DC_SETTING = const(0x82) FLASH_MODE = const(0xE5) BUSY = const(0) # 0=busy, 1=idle class EPD: def __init__(self, spi, cs, dc, rst, busy): self.spi = spi self.cs = cs self.dc = dc self.rst = rst self.busy = busy self.cs.init(self.cs.OUT, value=1) self.dc.init(self.dc.OUT, value=0) self.rst.init(self.rst.OUT, value=0) self.busy.init(self.busy.IN) self.width = EPD_WIDTH self.height = EPD_HEIGHT def _command(self, command, data=None): self.dc(0) self.cs(0) self.spi.write(bytearray([command])) self.cs(1) if data is not None: self._data(data) def _data(self, data): self.dc(1) self.cs(0) self.spi.write(data) self.cs(1) def init(self): self.reset() self._command(POWER_SETTING, b'\x37\x00') self._command(PANEL_SETTING, b'\xCF\x08') self._command(BOOSTER_SOFT_START, b'\xC7\xCC\x28') self._command(POWER_ON) self.wait_until_idle() self._command(PLL_CONTROL, b'\x3C') self._command(TEMPERATURE_CALIBRATION, b'\x00') self._command(VCOM_AND_DATA_INTERVAL_SETTING, b'\x77') self._command(TCON_SETTING, b'\x22') self._command(TCON_RESOLUTION, ustruct.pack(">HH", EPD_WIDTH, EPD_HEIGHT)) self._command(VCM_DC_SETTING, b'\x1E') # decide by LUT file self._command(FLASH_MODE, b'\x03') def wait_until_idle(self): while self.busy.value() == BUSY: sleep_ms(100) def reset(self): self.rst(0) sleep_ms(200) self.rst(1) sleep_ms(200) # draw the current frame memory def display_frame(self, frame_buffer): self._command(DATA_START_TRANSMISSION_1) for i in range(0, self.width * self.height // 8): temp1 = frame_buffer[i] j = 0 while (j < 8): if (temp1 & 0x80): temp2 = 0x03 else: temp2 = 0x00 temp2 = (temp2 << 4) & 0xFF temp1 = (temp1 << 1) & 0xFF j += 1 if (temp1 & 0x80): temp2 |= 0x03 else: temp2 |= 0x00 temp1 = (temp1 << 1) & 0xFF self._data(bytearray([temp2])) j += 1 self._command(DISPLAY_REFRESH) sleep_ms(100) self.wait_until_idle() # to wake call reset() or init() def sleep(self): self._command(POWER_OFF) self.wait_until_idle() self._command(DEEP_SLEEP, b'\xA5')