kopia lustrzana https://github.com/meshtastic/firmware
nano-g2-ultra (#2660)
* 'nano-g2-ultra' * revert overcommit * nano-g2-ultra-fmt * revert overcommit * revert overcommit --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>pull/2667/head
Neil Hao
GitHub
rodzic
ffcc1a0275
commit
b9c9f0f865
|
|
@ -0,0 +1,51 @@
|
|||
{
|
||||
"build": {
|
||||
"arduino": {
|
||||
"ldscript": "nrf52840_s140_v6.ld"
|
||||
},
|
||||
"core": "nRF5",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
|
||||
"f_cpu": "64000000L",
|
||||
"hwids": [
|
||||
["0x239A", "0x8029"],
|
||||
["0x239A", "0x0029"],
|
||||
["0x239A", "0x002A"],
|
||||
["0x239A", "0x802A"]
|
||||
],
|
||||
"usb_product": "BQ nRF52840",
|
||||
"mcu": "nrf52840",
|
||||
"variant": "nano-g2-ultra",
|
||||
"bsp": {
|
||||
"name": "adafruit"
|
||||
},
|
||||
"softdevice": {
|
||||
"sd_flags": "-DS140",
|
||||
"sd_name": "s140",
|
||||
"sd_version": "6.1.1",
|
||||
"sd_fwid": "0x00B6"
|
||||
},
|
||||
"bootloader": {
|
||||
"settings_addr": "0xFF000"
|
||||
}
|
||||
},
|
||||
"connectivity": ["bluetooth"],
|
||||
"debug": {
|
||||
"jlink_device": "nRF52840_xxAA",
|
||||
"svd_path": "nrf52840.svd"
|
||||
},
|
||||
"frameworks": ["arduino"],
|
||||
"name": "BQ nRF52840",
|
||||
"upload": {
|
||||
"maximum_ram_size": 248832,
|
||||
"maximum_size": 815104,
|
||||
"speed": 115200,
|
||||
"protocol": "nrfutil",
|
||||
"protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
|
||||
"use_1200bps_touch": true,
|
||||
"require_upload_port": true,
|
||||
"wait_for_upload_port": true
|
||||
},
|
||||
"url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
|
||||
"vendor": "BQ Consulting"
|
||||
}
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
; First prototype eink/nrf52840/sx1262 device
|
||||
[env:nano-g2-ultra]
|
||||
extends = nrf52840_base
|
||||
board = nano-g2-ultra
|
||||
debug_tool = jlink
|
||||
|
||||
# add our variants files to the include and src paths
|
||||
# define build flags for the TFT_eSPI library - NOTE: WE NOT LONGER USE TFT_eSPI, it was for an earlier version of the TTGO eink screens
|
||||
# -DBUSY_PIN=3 -DRST_PIN=2 -DDC_PIN=28 -DCS_PIN=30
|
||||
# add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
|
||||
build_flags = ${nrf52840_base.build_flags} -Ivariants/nano-g2-ultra -D NANO_G2_ULTRA
|
||||
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard"
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nano-g2-ultra>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
adafruit/Adafruit BusIO@^1.13.2
|
||||
lewisxhe/PCF8563_Library@^1.0.1
|
||||
;upload_protocol = fs
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
|
||||
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// Nothing need to be inited for now
|
||||
}
|
||||
|
|
@ -0,0 +1,197 @@
|
|||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_Nano_G2_
|
||||
#define _VARIANT_Nano_G2_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
//#define USE_LFRC // Board uses 32khz RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (1)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (-1)
|
||||
#define PIN_LED2 (-1)
|
||||
#define PIN_LED3 (-1)
|
||||
|
||||
#define LED_RED PIN_LED3
|
||||
#define LED_BLUE PIN_LED1
|
||||
#define LED_GREEN PIN_LED2
|
||||
|
||||
#define LED_BUILTIN LED_BLUE
|
||||
#define LED_CONN PIN_GREEN
|
||||
|
||||
#define LED_STATE_ON 0 // State when LED is lit
|
||||
//#define LED_INVERTED 1
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
#define PIN_BUTTON1 (32 + 6)
|
||||
|
||||
#define EXT_NOTIFY_OUT (0 + 4) // Default pin to use for Ext Notify Module.
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A4 (0 + 2) // Battery ADC
|
||||
|
||||
#define BATTERY_PIN PIN_A4
|
||||
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL2_RX (0 + 22)
|
||||
#define PIN_SERIAL2_TX (0 + 20)
|
||||
|
||||
/**
|
||||
Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (0 + 17)
|
||||
#define PIN_WIRE_SCL (0 + 15)
|
||||
|
||||
#define PIN_RTC_INT (0 + 14) // Interrupt from the PCF8563 RTC
|
||||
|
||||
/*
|
||||
External serial flash W25Q16JV_IQ
|
||||
*/
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK (0 + 8)
|
||||
#define PIN_QSPI_CS (32 + 7)
|
||||
#define PIN_QSPI_IO0 (0 + 6) // MOSI if using two bit interface
|
||||
#define PIN_QSPI_IO1 (0 + 26) // MISO if using two bit interface
|
||||
#define PIN_QSPI_IO2 (32 + 4) // WP if using two bit interface (i.e. not used)
|
||||
#define PIN_QSPI_IO3 (32 + 2) // HOLD if using two bit interface (i.e. not used)
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES W25Q16JV_IQ
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
/*
|
||||
* Lora radio
|
||||
*/
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (32 + 13) // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 (32 + 10)
|
||||
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
|
||||
//#define SX1262_DIO3 \
|
||||
(0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main
|
||||
// CPU?
|
||||
#define SX126X_BUSY (32 + 11)
|
||||
#define SX126X_RESET (32 + 15)
|
||||
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
|
||||
|
||||
// #define LORA_DISABLE_SENDING // Define this to disable transmission for testing (power testing etc...)
|
||||
|
||||
// #undef SX126X_CS
|
||||
|
||||
/*
|
||||
* GPS pins
|
||||
*/
|
||||
|
||||
#define GPS_L76K
|
||||
|
||||
#define PIN_GPS_WAKE (0 + 13) // An output to wake GPS, low means allow sleep, high means force wake
|
||||
#define PIN_GPS_TX (0 + 9) // This is for bits going TOWARDS the CPU
|
||||
#define PIN_GPS_RX (0 + 10) // This is for bits going TOWARDS the GPS
|
||||
|
||||
//#define GPS_THREAD_INTERVAL 50
|
||||
|
||||
#define PIN_SERIAL1_RX PIN_GPS_TX
|
||||
#define PIN_SERIAL1_TX PIN_GPS_RX
|
||||
|
||||
// PCF8563 RTC Module
|
||||
#define PCF8563_RTC 0x51
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
// For LORA, spi 0
|
||||
#define PIN_SPI_MISO (32 + 9)
|
||||
#define PIN_SPI_MOSI (0 + 11)
|
||||
#define PIN_SPI_SCK (0 + 12)
|
||||
|
||||
//#define PIN_PWR_EN (0 + 6)
|
||||
|
||||
// To debug via the segger JLINK console rather than the CDC-ACM serial device
|
||||
// #define USE_SEGGER
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (2)
|
||||
// it is defined in the anlaolgue pin section of this file
|
||||
// and has 12 bit resolution
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
|
||||
#define VBAT_MV_PER_LSB (0.73242188F)
|
||||
// Voltage divider value => 100K + 100K voltage divider on VBAT = (100K / (100K + 100K))
|
||||
#define VBAT_DIVIDER (0.5F)
|
||||
// Compensation factor for the VBAT divider
|
||||
#define VBAT_DIVIDER_COMP (2.0)
|
||||
// Fixed calculation of milliVolt from compensation value
|
||||
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP
|
||||
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
|
||||
|
||||
#define HAS_RTC 1
|
||||
|
||||
/**
|
||||
OLED Screen Model
|
||||
*/
|
||||
#define ARDUINO_ARCH_AVR
|
||||
#define USE_SH1107_128_64
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
Ładowanie…
Reference in New Issue