Updated Home (markdown)

Home.md

@@ -61,7 +61,7 @@ A worked example of generating and transmitting Horus Binary telemetry on Arduin
 Currently the most common platform for Horus Binary telemetry transmission is the Vaisala RS41 radiosonde. Using [radiosonde_auto_rx](https://github.com/projecthorus/radiosonde_auto_rx) we track and recover these radiosonde and reprogram them with [open source firmware](https://github.com/mikaelnousiainen/RS41ng), which generates the Horus Binary modulation. 
 These radiosondes are launched in many places around the world, so go hunting and get your own free balloon tracker!
 
-**If you are going to fly your own payload using Horus Binary, you must get a payload ID allocated for your use. This can be done by submitting an issue or a pull request to this repository, or e-mailing me at vk5qi (at) rfhead.net - NOTE: I will no longer be assigning Horus v1 IDs. Please switch to using firmware that supports the Horus Binary v2 format, e.g. [RS41ng](https://github.com/mikaelnousiainen/RS41ng) **
+**If you are going to fly your own payload using Horus Binary, you must get a payload ID allocated for your use. This can be done by submitting an issue or a pull request to this repository, or e-mailing me at vk5qi (at) rfhead.net - NOTE: I will no longer be assigning Horus v1 IDs. Please switch to using firmware that supports the Horus Binary v2 format, e.g. [RS41ng](https://github.com/mikaelnousiainen/RS41ng)**
 
 For a payload to show up on the HabHub tracker, you will also need to set up a [Habitat Payload Document](https://github.com/projecthorus/horusdemodlib/wiki/6-Setting-up-a-Habitat-Payload-Document). Payloads will automatically appear on the [SondeHub-Amateur tracker](https://amateur.sondehub.org/) with no configuration required.