# Receive *centre* frequency, in Hz
# Note: The SDR will be tuned to RXBANDWIDTH/2 below this frequency.
RXFREQ=434200000

# Receiver Gain. Set this to 0 to use automatic gain control, otherwise if running a
# preamplifier, you may want to experiment with different gain settings to optimize
# your receiver setup.
# You can find what gain range is valid for your RTLSDR by running: rtl_test
GAIN=0

# Bias Tee Enable (1) or Disable (0)
BIAS=0

# Receiver PPM offset
PPM=0

# Frequency estimator bandwidth. The wider the bandwidth, the more drift and frequency error the modem can tolerate,
# but the higher the chance that the modem will lock on to a strong spurious signal.
# Note: The SDR will be tuned to RXFREQ-RXBANDWIDTH/2, and the estimator set to look at 0-RXBANDWIDTH Hz.
RXBANDWIDTH=10000

# Enable (1) or disable (0) modem statistics output.
# If enabled, modem statistics are written to stats.txt, and can be observed
# during decoding by running: tail -f stats.txt | python fskstats.py
STATS_OUTPUT=0