ha7ilm-csdr/Makefile

114 wiersze
6.6 KiB
Makefile

# This software is part of libcsdr, a set of simple DSP routines for
# Software Defined Radio.
#
# Copyright (c) 2014, Andras Retzler <randras@sdr.hu>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of the copyright holder nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL ANDRAS RETZLER BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
LIBSOURCES = fft_fftw.c libcsdr_wrapper.c
#SOURCES = csdr.c $(LIBSOURCES)
cpufeature = $(if $(findstring $(1),$(shell cat /proc/cpuinfo)),$(2))
PARAMS_SSE = $(call cpufeature,sse,-msse) $(call cpufeature,sse2,-msse2) $(call cpufeature,sse3,-msse3) $(call cpufeature,sse4a,-msse4a) $(call cpufeature,sse4_1,-msse4.1) $(call cpufeature,sse4_2,-msse4.2 -msse4) -mfpmath=sse
PARAMS_NEON = -mfloat-abi=hard -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mvectorize-with-neon-quad -funsafe-math-optimizations -Wformat=0 -DNEON_OPTS
#tnx Jan Szumiec for the Raspberry Pi support
PARAMS_RASPI = -mfloat-abi=hard -mcpu=arm1176jzf-s -mfpu=vfp -funsafe-math-optimizations -Wformat=0
PARAMS_ARM = $(if $(call cpufeature,BCM2708,dummy-text),$(PARAMS_RASPI),$(PARAMS_NEON))
PARAMS_SIMD = $(if $(call cpufeature,sse,dummy-text),$(PARAMS_SSE),$(PARAMS_ARM))
PARAMS_LOOPVECT = -O3 -ffast-math -fdump-tree-vect-details -dumpbase dumpvect
PARAMS_LIBS = -g -lm -lrt -lfftw3f -DUSE_FFTW -DLIBCSDR_GPL -DUSE_IMA_ADPCM
PARAMS_SO = -fpic
PARAMS_MISC = -Wno-unused-result
#DEBUG_ON = 0 #debug is always on by now (anyway it could be compiled with `make DEBUG_ON=1`)
#PARAMS_DEBUG = $(if $(DEBUG_ON),-g,)
FFTW_PACKAGE = fftw-3.3.3
PREFIX ?= /usr
SOVERSION = 0.15
PARSEVECT ?= yes
.PHONY: clean-vect clean codequality checkdocs v
all: codequality csdr nmux
libcsdr.so: fft_fftw.c fft_rpi.c libcsdr_wrapper.c libcsdr.c libcsdr_gpl.c fastddc.c fastddc.h fft_fftw.h fft_rpi.h ima_adpcm.h libcsdr_gpl.h libcsdr.h predefined.h
@echo NOTE: you may have to manually edit Makefile to optimize for your CPU \(especially if you compile on ARM, please edit PARAMS_NEON\).
@echo Auto-detected optimization parameters: $(PARAMS_SIMD)
@echo
rm -f dumpvect*.vect
gcc -std=gnu99 $(PARAMS_LOOPVECT) $(PARAMS_SIMD) $(LIBSOURCES) $(PARAMS_LIBS) $(PARAMS_MISC) -fpic -shared -Wl,-soname,libcsdr.so.$(SOVERSION) -o libcsdr.so.$(SOVERSION)
@ln -fs libcsdr.so.$(SOVERSION) libcsdr.so
ifeq ($(PARSEVECT),yes)
-./parsevect dumpvect*.vect
endif
csdr: csdr.c libcsdr.so
gcc -std=gnu99 $(PARAMS_LOOPVECT) $(PARAMS_SIMD) csdr.c $(PARAMS_LIBS) -L. -lcsdr $(PARAMS_MISC) -o csdr
ddcd: ddcd.cpp libcsdr.so ddcd.h
g++ $(PARAMS_LOOPVECT) $(PARAMS_SIMD) ddcd.cpp $(PARAMS_LIBS) -L. -lcsdr -lpthread $(PARAMS_MISC) -o ddcd
nmux: nmux.cpp libcsdr.so nmux.h tsmpool.cpp tsmpool.h
g++ $(PARAMS_LOOPVECT) $(PARAMS_SIMD) nmux.cpp tsmpool.cpp $(PARAMS_LIBS) -L. -lcsdr -lpthread $(PARAMS_MISC) -o nmux
arm-cross: clean-vect
#note: this doesn't work since having added FFTW
arm-linux-gnueabihf-gcc -std=gnu99 -O3 -fshort-double -ffast-math -dumpbase dumpvect-arm -fdump-tree-vect-details -mfloat-abi=softfp -march=armv7-a -mtune=cortex-a9 -mfpu=neon -mvectorize-with-neon-quad -Wno-unused-result -Wformat=0 $(SOURCES) -lm -o ./csdr
clean-vect:
rm -f dumpvect*.vect
clean: clean-vect
rm -f libcsdr.so.$(SOVERSION) csdr ddcd nmux *.o *.so
install: all
install -m 0755 libcsdr.so.$(SOVERSION) $(PREFIX)/lib
install -m 0755 csdr $(PREFIX)/bin
install -m 0755 csdr-fm $(PREFIX)/bin
install -m 0755 nmux $(PREFIX)/bin
#-install -m 0755 ddcd $(PREFIX)/bin
@ldconfig || echo please run ldconfig
uninstall:
rm $(PREFIX)/lib/libcsdr.so.$(SOVERSION) $(PREFIX)/bin/csdr $(PREFIX)/bin/csdr-fm
ldconfig
disasm:
objdump -S libcsdr.so.$(SOVERSION) > libcsdr.disasm
emcc-clean:
-rm sdr.js/sdr.js
-rm sdr.js/sdrjs-compiled.js
-rm -rf sdr.js/$(FFTW_PACKAGE)
emcc-get-deps:
echo "getting and compiling fftw3 with emscripten..."
cd sdr.js; \
wget http://fftw.org/$(FFTW_PACKAGE).tar.gz; \
tar -xvf $(FFTW_PACKAGE).tar.gz; \
rm $(FFTW_PACKAGE).tar.gz; \
cd $(FFTW_PACKAGE); \
emconfigure ./configure --enable-float --disable-fortran --prefix=`pwd`/emscripten-install --libdir=`pwd`/emscripten-lib; \
emmake make; \
emmake make install
emcc:
emcc -O3 -Isdr.js/$(FFTW_PACKAGE)/api -Lsdr.js/$(FFTW_PACKAGE)/emscripten-lib -o sdr.js/sdrjs-compiled.js fft_fftw.c libcsdr_wrapper.c -s TOTAL_MEMORY=67108864 -DLIBCSDR_GPL -DUSE_IMA_ADPCM -DUSE_FFTW -lfftw3f -s EXPORTED_FUNCTIONS="`python sdr.js/exported_functions.py`"
cat sdr.js/sdrjs-header.js sdr.js/sdrjs-compiled.js sdr.js/sdrjs-footer.js > sdr.js/sdr.js
emcc-beautify:
bash -c 'type js-beautify >/dev/null 2>&1; if [ $$? -eq 0 ]; then js-beautify sdr.js/sdr.js >sdr.js/sdr.js.beautiful; mv sdr.js/sdr.js.beautiful sdr.js/sdr.js; fi'
codequality:
@bash -c 'if [ `cat csdr.c | grep badsyntax | grep -v return | wc -l` -ne 1 ]; then echo "error at code quality check: badsyntax() used in csdr.c without return."; exit 1; else exit 0; fi'
checkdocs:
@cat csdr.c | grep strcmp | egrep 'argv\[1\]' | awk -F'"' '$$0=$$2' > /tmp/csdr-list-of-functions
@cat /tmp/csdr-list-of-functions | xargs -I{} bash -c 'if ! cat csdr.c | grep \"\ \ \ \ {} >/dev/null ; then echo "warning: \"{}\" is in csdr.c code, but not in usage string"; fi'
@cat /tmp/csdr-list-of-functions | xargs -I{} bash -c 'if ! cat README.md | grep {} >/dev/null ; then echo "warning: \"{}\" is in csdr.c code, but not in README.md"; fi'
@rm /tmp/csdr-list-of-functions
v:
vim csdr.c libcsdr.c