Add missing simulation yamls

coil_mag_materials.yml

@@ -0,0 +1,68 @@
+air:
+  Density: 1.1885  # 20°C
+  Electric Conductivity: 0.0 
+  Heat Capacity: 1006.4  # 20°C
+  Heat Conductivity: 0.025873  # 20°C
+  Relative Permeability: 1
+  Relative Permittivity: 1
+ro4003c:
+  Density: 1790  # 23°C
+  Relative Permeability: 1
+  Relative Permittivity: 3.55  
+ideal:
+  Relative Permittivity: 1 
+copper:
+  Density: 8960.0  # 0°C
+  Electric Conductivity: 32300000  # 200°C
+  Emissivity: 0.012  # 327°C
+  Heat Capacity: 415.0  # 200°C
+  Heat Conductivity: 401.0  # 0°C
+  Relative Permeability: 1
+  Relative Permittivity: 1
+graphite_CZ3-R6300:  # crucible
+  Density: 1730.0
+  Electric Conductivity: 58800
+  Emissivity: 0.81  # 205°C
+  Heat Capacity: 1237.0
+  Heat Conductivity: 65  # 20°C
+  Relative Permeability: 1
+  Relative Permittivity: 1
+graphite_FU8957:  # heater
+  Density: 1750.0
+  Emissivity: 0.81  # 250°C
+  Heat Capacity: 1237.0
+  Heat Conductivity: 105  # averaged over different given values
+  Relative Permeability: 1
+  Relative Permittivity: 1
+steel_1.4541:
+  Density: 7900.0  # 20°C
+  Electric Conductivity: 1370
+  Emissivity: 0.111  # 200°C
+  Heat Capacity:  470.0 # 20°C
+  Heat Conductivity: 15.0 # 20°C
+  Relative Permeability: 1
+  Relative Permittivity: 1
+tin_liquid:
+  Density: 6980.0
+  Electric Conductivity: 2080000
+  Emissivity: 0.064  # set equal to solid
+  Heat Capacity: 252.7
+  Heat Conductivity: 29.0
+  Relative Permeability: 1
+  Relative Permittivity: 1
+  Liquid: 'Logical True'
+tin_solid:
+  Density: 7179.0
+  Electric Conductivity: 4380000
+  Emissivity: 0.064
+  Heat Capacity: 244.0
+  Heat Conductivity: 60.0
+  Relative Permeability: 1
+  Relative Permittivity: 1
+  Solid: 'Logical True'
+  Melting Point: 505
+  Latent Heat: 59600
+water:
+  Density: 1000.0
+  Heat Capacity: 4182.0
+  Heat Conductivity: 0.6

coil_mag_sim.yml

@@ -0,0 +1,14 @@
+3D_steady:
+  Mesh Levels: 1
+  Max Output Level: 7
+  Coordinate System: Cartesian
+  Coordinate Mapping(3): 1 2 3
+  Simulation Type: Steady state
+  Steady State Max Iterations: 1
+  Output Intervals: 1
+  Timestepping Method: BDF
+  Simulation Timing: True
+  BDF Order: 1
+  Solver Input File: case.sif
+  Post File: case.vtu
+  Output File: case.result

coil_mag_solvers.yml

@@ -0,0 +1,50 @@
+Static_Current_Conduction:
+  Equation: Static Current Conduction
+  Variable: Potential
+  Procedure: '"StatCurrentSolve" "StatCurrentSolver"'
+  Calculate Volume Current: True
+  Calculate Joule Heating: False
+  Optimize Bandwidth: True
+  Nonlinear System Max Iterations: 1
+  Linear System Solver: Iterative
+  Linear System Iterative Method: BiCGStabl
+  Linear System Max Iterations: 5000
+  Linear System Convergence Tolerance: 1.0e-10
+  Linear System Preconditioning: ILU0
+  Linear System ILUT Tolerance: 1.0e-3
+  Linear System Abort Not Converged: False
+  Linear System Residual Output: 20
+  Linear System Precondition Recompute: 1
+
+Magneto_Dynamics:
+  Equation: MGDynamics
+  Procedure: '"MagnetoDynamics" "WhitneyAVSolver"'
+  Newton-Raphson Iteration: True
+  Nonlinear System Max Iterations: 1
+  Linear System Solver: Iterative
+  Linear System Preconditioning: none
+  Linear System Convergence Tolerance: 1e-8
+  Linear System Residual Output: 20
+  Linear System Max Iterations: 5000
+  Linear System Iterative Method: BiCGStabl
+  BiCGStabL Polynomial Degree: 4
+  Idrs Parameter: 6
+  Solver Timing: True 
+
+Magneto_Dynamics_Calculations:
+  Equation: MGDynamicsCalc
+  Procedure: '"MagnetoDynamics" "MagnetoDynamicsCalcFields"'
+  Linear System Symmetric: True
+  Calculate Magnetic Field Strength: True
+  Calculate JxB: False
+  Calculate Current Density: True
+  Calculate Electric Field: False
+  Calculate Nodal Fields: False
+  Calculate Elemental Fields: True
+  Linear System Solver: Iterative
+  Linear System Preconditioning: ILU0
+  Linear System Residual Output: 0
+  Linear System Max Iterations: 5000
+  Linear System Iterative Method: CG
+  Linear System Convergence Tolerance: 1.0e-8
+

gerbonara/cad/kicad/base_types.py

@@ -239,7 +239,7 @@ class AtPos(XYCoord):
     x: float = 0 # in millimeter
     y: float = 0 # in millimeter
     rotation: int = 0  # in degrees, can only be 0, 90, 180 or 270.
-    unlocked: Flag() = False
+    unlocked: Flag() = True
 
     def __before_sexp__(self):
         self.rotation = int(round(self.rotation % 360))

gerbonara/cad/kicad/footprints.py

@@ -627,7 +627,7 @@ class Footprint:
     zone_connect: Named(int) = None
     thermal_width: Named(float) = None
     thermal_gap: Named(float) = None
-    attributes: List(Attribute) = field(default_factory=list)
+    attributes: Attribute = field(default_factory=list)
     private_layers: Named(str) = None
     net_tie_pad_groups: Named(Array(str)) = None
     texts: List(Text) = field(default_factory=list)
@@ -672,11 +672,27 @@ class Footprint:
             effects = TextEffect()
 
         self.properties.append(DrawnProperty(key, value, 
-                                             at=AtPos(x, y, rotation),
+                                             at=AtPos(x, y, rotation, unlocked=True),
                                              layer=layer,
                                              hide=hide,
                                              effects=effects))
 
+    def make_standard_properties(self):
+        if not self.property_value('Reference', None):
+            self.set_property('Reference', 'REF**', 0, 0, 0, 'F.SilkS')
+
+        if not self.property_value('Value', None):
+            self.set_property('Value', self.name or 'VAL**', 0, 0, 0, hide=False)
+
+        if not self.property_value('Footprint', None):
+            self.set_property('Footprint', '', 0, 0, 0)
+
+        if not self.property_value('Datasheet', None):
+            self.set_property('Datasheet', '', 0, 0, 0)
+
+        if not self.property_value('Description', None):
+            self.set_property('Description', self.descr or '', 0, 0, 0)
+
     @property
     def pads_by_number(self):
         return {(int(pad.number) if pad.number.isnumeric() else pad.number): pad for pad in self.pads if pad.number}