kopia lustrzana https://github.com/pjalocha/esp32-ogn-tracker
Update README.md
rodzic
5e4badfdbe
commit
2683f2beae
14
README.md
14
README.md
|
@ -32,10 +32,10 @@ To get the OGN-Tracker source code from this github repository:
|
|||
```
|
||||
cd
|
||||
git clone https://github.com/pjalocha/esp32-ogn-tracker.git
|
||||
cd ogn32-ogn-tracker
|
||||
cd esp32-ogn-tracker
|
||||
```
|
||||
|
||||
If you want to use the OLED display with the U8g2 library you need to install it from the project directory:
|
||||
If you want to use the OLED display with the U8g2 library you need to install it in *components* in the project directory:
|
||||
|
||||
```
|
||||
mkdir components
|
||||
|
@ -55,6 +55,16 @@ make
|
|||
make flash
|
||||
```
|
||||
|
||||
To see the console output and thus to check if the ESP32 is alive
|
||||
```
|
||||
minicom
|
||||
```
|
||||
For minicom setup use 115200bps /dev/ttyUSB0 serial port and turn hardware and software handshake OFF. It is important, otherwise if you type something it won't be sent to the ESP32.
|
||||
Press *Ctrl-C* to list the internal state and parameters. To change parameters, use $POGNS like this:
|
||||
```
|
||||
$POGNS,AcftType=1,Pilot=YourName
|
||||
```
|
||||
|
||||
## Wiring the GPS
|
||||
|
||||
For the original HELTEC board you need to wire the UART GPS follow the pins defined in the hal.cpp
|
||||
|
|
Ładowanie…
Reference in New Issue