kopia lustrzana https://github.com/espressif/esp-idf
1096 wiersze
43 KiB
C
1096 wiersze
43 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** Group: FIFO R/W registers */
|
|
/** Type of chndata register
|
|
* The read and write data register for CHANNELn by apb fifo access.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** chndata : RO; bitpos: [31:0]; default: 0;
|
|
* Read and write data for channel n via APB FIFO.
|
|
*/
|
|
uint32_t chndata: 32;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chndata_reg_t;
|
|
|
|
/** Type of chmdata register
|
|
* The read and write data register for CHANNEL$n by apb fifo access.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** chmdata : RO; bitpos: [31:0]; default: 0;
|
|
* Read and write data for channel $n via APB FIFO.
|
|
*/
|
|
uint32_t chmdata: 32;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chmdata_reg_t;
|
|
|
|
|
|
/** Group: Configuration registers */
|
|
/** Type of chnconf0 register
|
|
* Channel n configure register 0
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_start_chn : WT; bitpos: [0]; default: 0;
|
|
* Set this bit to start sending data on CHANNELn.
|
|
*/
|
|
uint32_t tx_start_chn: 1;
|
|
/** mem_rd_rst_chn : WT; bitpos: [1]; default: 0;
|
|
* Set this bit to reset read ram address for CHANNELn by accessing transmitter.
|
|
*/
|
|
uint32_t mem_rd_rst_chn: 1;
|
|
/** apb_mem_rst_chn : WT; bitpos: [2]; default: 0;
|
|
* Set this bit to reset W/R ram address for CHANNELn by accessing apb fifo.
|
|
*/
|
|
uint32_t apb_mem_rst_chn: 1;
|
|
/** tx_conti_mode_chn : R/W; bitpos: [3]; default: 0;
|
|
* Set this bit to restart transmission from the first data to the last data in
|
|
* CHANNELn.
|
|
*/
|
|
uint32_t tx_conti_mode_chn: 1;
|
|
/** mem_tx_wrap_en_chn : R/W; bitpos: [4]; default: 0;
|
|
* This is the channel n enable bit for wraparound mode: it will resume sending at the
|
|
* start when the data to be sent is more than its memory size.
|
|
*/
|
|
uint32_t mem_tx_wrap_en_chn: 1;
|
|
/** idle_out_lv_chn : R/W; bitpos: [5]; default: 0;
|
|
* This bit configures the level of output signal in CHANNELn when the latter is in
|
|
* IDLE state.
|
|
*/
|
|
uint32_t idle_out_lv_chn: 1;
|
|
/** idle_out_en_chn : R/W; bitpos: [6]; default: 0;
|
|
* This is the output enable-control bit for CHANNELn in IDLE state.
|
|
*/
|
|
uint32_t idle_out_en_chn: 1;
|
|
/** tx_stop_chn : R/W/SC; bitpos: [7]; default: 0;
|
|
* Set this bit to stop the transmitter of CHANNELn sending data out.
|
|
*/
|
|
uint32_t tx_stop_chn: 1;
|
|
/** div_cnt_chn : R/W; bitpos: [15:8]; default: 2;
|
|
* This register is used to configure the divider for clock of CHANNELn.
|
|
*/
|
|
uint32_t div_cnt_chn: 8;
|
|
/** mem_size_chn : R/W; bitpos: [19:16]; default: 1;
|
|
* This register is used to configure the maximum size of memory allocated to CHANNELn.
|
|
*/
|
|
uint32_t mem_size_chn: 4;
|
|
/** carrier_eff_en_chn : R/W; bitpos: [20]; default: 1;
|
|
* 1: Add carrier modulation on the output signal only at the send data state for
|
|
* CHANNELn. 0: Add carrier modulation on the output signal at all state for CHANNELn.
|
|
* Only valid when RMT_CARRIER_EN_CHn is 1.
|
|
*/
|
|
uint32_t carrier_eff_en_chn: 1;
|
|
/** carrier_en_chn : R/W; bitpos: [21]; default: 1;
|
|
* This is the carrier modulation enable-control bit for CHANNELn. 1: Add carrier
|
|
* modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
*/
|
|
uint32_t carrier_en_chn: 1;
|
|
/** carrier_out_lv_chn : R/W; bitpos: [22]; default: 1;
|
|
* This bit is used to configure the position of carrier wave for CHANNELn.
|
|
*
|
|
* 1'h0: add carrier wave on low level.
|
|
*
|
|
* 1'h1: add carrier wave on high level.
|
|
*/
|
|
uint32_t carrier_out_lv_chn: 1;
|
|
/** afifo_rst_chn : WT; bitpos: [23]; default: 0;
|
|
* Reserved
|
|
*/
|
|
uint32_t afifo_rst_chn: 1;
|
|
/** conf_update_chn : WT; bitpos: [24]; default: 0;
|
|
* synchronization bit for CHANNELn
|
|
*/
|
|
uint32_t conf_update_chn: 1;
|
|
/** dma_access_en_chn : WT; bitpos: [25]; default: 0;
|
|
* DMA access control bit for CHANNELn (only CHANNEL3 has this control bit)
|
|
*/
|
|
uint32_t dma_access_en_chn: 1;
|
|
uint32_t reserved_26: 6;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chnconf0_reg_t;
|
|
|
|
/** Type of chmconf0 register
|
|
* Channel m configure register 0
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** div_cnt_chm : R/W; bitpos: [7:0]; default: 2;
|
|
* This register is used to configure the divider for clock of CHANNELm.
|
|
*/
|
|
uint32_t div_cnt_chm: 8;
|
|
/** idle_thres_chm : R/W; bitpos: [22:8]; default: 32767;
|
|
* When no edge is detected on the input signal and continuous clock cycles is longer
|
|
* than this register value, received process is finished.
|
|
*/
|
|
uint32_t idle_thres_chm: 15;
|
|
/** dma_access_en_m : WT; bitpos: [23]; default: 0;
|
|
* DMA access control bit for CHANNELm (only channel7 has this control bit)
|
|
*/
|
|
uint32_t dma_access_en_chm: 1;
|
|
/** mem_size_chm : R/W; bitpos: [27:24]; default: 1;
|
|
* This register is used to configure the maximum size of memory allocated to CHANNELm.
|
|
*/
|
|
uint32_t mem_size_chm: 4;
|
|
/** carrier_en_chm : R/W; bitpos: [28]; default: 1;
|
|
* This is the carrier modulation enable-control bit for CHANNELm. 1: Add carrier
|
|
* modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
*/
|
|
uint32_t carrier_en_chm: 1;
|
|
/** carrier_out_lv_chm : R/W; bitpos: [29]; default: 1;
|
|
* This bit is used to configure the position of carrier wave for CHANNELm.
|
|
*
|
|
* 1'h0: add carrier wave on low level.
|
|
*
|
|
* 1'h1: add carrier wave on high level.
|
|
*/
|
|
uint32_t carrier_out_lv_chm: 1;
|
|
uint32_t reserved_30: 2;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chmconf0_reg_t;
|
|
|
|
/** Type of chmconf1 register
|
|
* Channel m configure register 1
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** rx_en_chm : R/W; bitpos: [0]; default: 0;
|
|
* Set this bit to enable receiver to receive data on CHANNELm.
|
|
*/
|
|
uint32_t rx_en_chm: 1;
|
|
/** mem_wr_rst_chm : WT; bitpos: [1]; default: 0;
|
|
* Set this bit to reset write ram address for CHANNELm by accessing receiver.
|
|
*/
|
|
uint32_t mem_wr_rst_chm: 1;
|
|
/** apb_mem_rst_chm : WT; bitpos: [2]; default: 0;
|
|
* Set this bit to reset W/R ram address for CHANNELm by accessing apb fifo.
|
|
*/
|
|
uint32_t apb_mem_rst_chm: 1;
|
|
/** mem_owner_chm : R/W/SC; bitpos: [3]; default: 1;
|
|
* This register marks the ownership of CHANNELm's ram block.
|
|
*
|
|
* 1'h1: Receiver is using the ram.
|
|
*
|
|
* 1'h0: APB bus is using the ram.
|
|
*/
|
|
uint32_t mem_owner_chm: 1;
|
|
/** rx_filter_en_chm : R/W; bitpos: [4]; default: 0;
|
|
* This is the receive filter's enable bit for CHANNELm.
|
|
*/
|
|
uint32_t rx_filter_en_chm: 1;
|
|
/** rx_filter_thres_chm : R/W; bitpos: [12:5]; default: 15;
|
|
* Ignores the input pulse when its width is smaller than this register value in APB
|
|
* clock periods (in receive mode).
|
|
*/
|
|
uint32_t rx_filter_thres_chm: 8;
|
|
/** mem_rx_wrap_en_chm : R/W; bitpos: [13]; default: 0;
|
|
* This is the channel m enable bit for wraparound mode: it will resume receiving at
|
|
* the start when the data to be received is more than its memory size.
|
|
*/
|
|
uint32_t mem_rx_wrap_en_chm: 1;
|
|
/** afifo_rst_chm : WT; bitpos: [14]; default: 0;
|
|
* Reserved
|
|
*/
|
|
uint32_t afifo_rst_chm: 1;
|
|
/** conf_update_chm : WT; bitpos: [15]; default: 0;
|
|
* synchronization bit for CHANNELm
|
|
*/
|
|
uint32_t conf_update_chm: 1;
|
|
uint32_t reserved_16: 16;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chmconf1_reg_t;
|
|
|
|
/** Type of chm_rx_carrier_rm register
|
|
* Channel m carrier remove register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** carrier_low_thres_chm : R/W; bitpos: [15:0]; default: 0;
|
|
* The low level period in a carrier modulation mode is
|
|
* (REG_RMT_REG_CARRIER_LOW_THRES_CHm + 1) for channel m.
|
|
*/
|
|
uint32_t carrier_low_thres_chm: 16;
|
|
/** carrier_high_thres_chm : R/W; bitpos: [31:16]; default: 0;
|
|
* The high level period in a carrier modulation mode is
|
|
* (REG_RMT_REG_CARRIER_HIGH_THRES_CHm + 1) for channel m.
|
|
*/
|
|
uint32_t carrier_high_thres_chm: 16;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chm_rx_carrier_rm_reg_t;
|
|
|
|
/** Type of sys_conf register
|
|
* RMT apb configuration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** apb_fifo_mask : R/W; bitpos: [0]; default: 0;
|
|
* 1'h1: access memory directly. 1'h0: access memory by FIFO.
|
|
*/
|
|
uint32_t apb_fifo_mask: 1;
|
|
/** mem_clk_force_on : R/W; bitpos: [1]; default: 0;
|
|
* Set this bit to enable the clock for RMT memory.
|
|
*/
|
|
uint32_t mem_clk_force_on: 1;
|
|
/** mem_force_pd : R/W; bitpos: [2]; default: 0;
|
|
* Set this bit to power down RMT memory.
|
|
*/
|
|
uint32_t mem_force_pd: 1;
|
|
/** mem_force_pu : R/W; bitpos: [3]; default: 0;
|
|
* 1: Disable RMT memory light sleep power down function. 0: Power down RMT memory
|
|
* when RMT is in light sleep mode.
|
|
*/
|
|
uint32_t mem_force_pu: 1;
|
|
/** sclk_div_num : R/W; bitpos: [11:4]; default: 1;
|
|
* the integral part of the fractional divisor
|
|
*/
|
|
uint32_t sclk_div_num: 8;
|
|
/** sclk_div_a : R/W; bitpos: [17:12]; default: 0;
|
|
* the numerator of the fractional part of the fractional divisor
|
|
*/
|
|
uint32_t sclk_div_a: 6;
|
|
/** sclk_div_b : R/W; bitpos: [23:18]; default: 0;
|
|
* the denominator of the fractional part of the fractional divisor
|
|
*/
|
|
uint32_t sclk_div_b: 6;
|
|
/** sclk_sel : R/W; bitpos: [25:24]; default: 1;
|
|
* choose the clock source of rmt_sclk. 1:CLK_80Mhz;2:CLK_8MHz; 2:XTAL
|
|
*/
|
|
uint32_t sclk_sel: 2;
|
|
/** sclk_active : R/W; bitpos: [26]; default: 1;
|
|
* rmt_sclk switch
|
|
*/
|
|
uint32_t sclk_active: 1;
|
|
uint32_t reserved_27: 4;
|
|
/** clk_en : R/W; bitpos: [31]; default: 0;
|
|
* RMT register clock gate enable signal. 1: Power up the drive clock of registers. 0:
|
|
* Power down the drive clock of registers
|
|
*/
|
|
uint32_t clk_en: 1;
|
|
};
|
|
uint32_t val;
|
|
} rmt_sys_conf_reg_t;
|
|
|
|
/** Type of ref_cnt_rst register
|
|
* RMT clock divider reset register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** ref_cnt_rst_ch0 : WT; bitpos: [0]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL0.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch0: 1;
|
|
/** ref_cnt_rst_ch1 : WT; bitpos: [1]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL1.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch1: 1;
|
|
/** ref_cnt_rst_ch2 : WT; bitpos: [2]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL2.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch2: 1;
|
|
/** ref_cnt_rst_ch3 : WT; bitpos: [3]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL3.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch3: 1;
|
|
/** ref_cnt_rst_ch4 : WT; bitpos: [4]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL4.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch4: 1;
|
|
/** ref_cnt_rst_ch5 : WT; bitpos: [5]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL5.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch5: 1;
|
|
/** ref_cnt_rst_ch6 : WT; bitpos: [6]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL6.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch6: 1;
|
|
/** ref_cnt_rst_ch7 : WT; bitpos: [7]; default: 0;
|
|
* This register is used to reset the clock divider of CHANNEL7.
|
|
*/
|
|
uint32_t ref_cnt_rst_ch7: 1;
|
|
uint32_t reserved_8: 24;
|
|
};
|
|
uint32_t val;
|
|
} rmt_ref_cnt_rst_reg_t;
|
|
|
|
|
|
/** Group: Status registers */
|
|
/** Type of chnstatus register
|
|
* Channel n status register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** mem_raddr_ex_chn : RO; bitpos: [9:0]; default: 0;
|
|
* This register records the memory address offset when transmitter of CHANNELn is
|
|
* using the RAM.
|
|
*/
|
|
uint32_t mem_raddr_ex_chn: 10;
|
|
uint32_t reserved_10: 1;
|
|
/** apb_mem_waddr_chn : RO; bitpos: [20:11]; default: 0;
|
|
* This register records the memory address offset when writes RAM over APB bus.
|
|
*/
|
|
uint32_t apb_mem_waddr_chn: 10;
|
|
uint32_t reserved_21: 1;
|
|
/** state_chn : RO; bitpos: [24:22]; default: 0;
|
|
* This register records the FSM status of CHANNELn.
|
|
*/
|
|
uint32_t state_chn: 3;
|
|
/** mem_empty_chn : RO; bitpos: [25]; default: 0;
|
|
* This status bit will be set when the data to be set is more than memory size and
|
|
* the wraparound mode is disabled.
|
|
*/
|
|
uint32_t mem_empty_chn: 1;
|
|
/** apb_mem_wr_err_chn : RO; bitpos: [26]; default: 0;
|
|
* This status bit will be set if the offset address out of memory size when writes
|
|
* via APB bus.
|
|
*/
|
|
uint32_t apb_mem_wr_err_chn: 1;
|
|
uint32_t reserved_27: 5;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chnstatus_reg_t;
|
|
|
|
/** Type of chmstatus register
|
|
* Channel m status register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** mem_waddr_ex_chm : RO; bitpos: [9:0]; default: 192;
|
|
* This register records the memory address offset when receiver of CHANNELm is using
|
|
* the RAM.
|
|
*/
|
|
uint32_t mem_waddr_ex_chm: 10;
|
|
uint32_t reserved_10: 1;
|
|
/** apb_mem_raddr_chm : RO; bitpos: [20:11]; default: 192;
|
|
* This register records the memory address offset when reads RAM over APB bus.
|
|
*/
|
|
uint32_t apb_mem_raddr_chm: 10;
|
|
uint32_t reserved_21: 1;
|
|
/** state_chm : RO; bitpos: [24:22]; default: 0;
|
|
* This register records the FSM status of CHANNELm.
|
|
*/
|
|
uint32_t state_chm: 3;
|
|
/** mem_owner_err_chm : RO; bitpos: [25]; default: 0;
|
|
* This status bit will be set when the ownership of memory block is wrong.
|
|
*/
|
|
uint32_t mem_owner_err_chm: 1;
|
|
/** mem_full_chm : RO; bitpos: [26]; default: 0;
|
|
* This status bit will be set if the receiver receives more data than the memory size.
|
|
*/
|
|
uint32_t mem_full_chm: 1;
|
|
/** apb_mem_rd_err_chm : RO; bitpos: [27]; default: 0;
|
|
* This status bit will be set if the offset address out of memory size when reads via
|
|
* APB bus.
|
|
*/
|
|
uint32_t apb_mem_rd_err_chm: 1;
|
|
uint32_t reserved_28: 4;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chmstatus_reg_t;
|
|
|
|
|
|
/** Group: Interrupt registers */
|
|
/** Type of int_raw register
|
|
* Raw interrupt status
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** ch0_tx_end_int_raw : R/WTC/SS; bitpos: [0]; default: 0;
|
|
* The interrupt raw bit for CHANNEL0. Triggered when transmission done.
|
|
*/
|
|
uint32_t ch0_tx_end_int_raw: 1;
|
|
/** ch1_tx_end_int_raw : R/WTC/SS; bitpos: [1]; default: 0;
|
|
* The interrupt raw bit for CHANNEL1. Triggered when transmission done.
|
|
*/
|
|
uint32_t ch1_tx_end_int_raw: 1;
|
|
/** ch2_tx_end_int_raw : R/WTC/SS; bitpos: [2]; default: 0;
|
|
* The interrupt raw bit for CHANNEL2. Triggered when transmission done.
|
|
*/
|
|
uint32_t ch2_tx_end_int_raw: 1;
|
|
/** ch3_tx_end_int_raw : R/WTC/SS; bitpos: [3]; default: 0;
|
|
* The interrupt raw bit for CHANNEL3. Triggered when transmission done.
|
|
*/
|
|
uint32_t ch3_tx_end_int_raw: 1;
|
|
/** ch0_err_int_raw : R/WTC/SS; bitpos: [4]; default: 0;
|
|
* The interrupt raw bit for CHANNEL0. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch0_err_int_raw: 1;
|
|
/** ch1_err_int_raw : R/WTC/SS; bitpos: [5]; default: 0;
|
|
* The interrupt raw bit for CHANNEL1. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch1_err_int_raw: 1;
|
|
/** ch2_err_int_raw : R/WTC/SS; bitpos: [6]; default: 0;
|
|
* The interrupt raw bit for CHANNEL2. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch2_err_int_raw: 1;
|
|
/** ch3_err_int_raw : R/WTC/SS; bitpos: [7]; default: 0;
|
|
* The interrupt raw bit for CHANNEL3. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch3_err_int_raw: 1;
|
|
/** ch0_tx_thr_event_int_raw : R/WTC/SS; bitpos: [8]; default: 0;
|
|
* The interrupt raw bit for CHANNEL0. Triggered when transmitter sent more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch0_tx_thr_event_int_raw: 1;
|
|
/** ch1_tx_thr_event_int_raw : R/WTC/SS; bitpos: [9]; default: 0;
|
|
* The interrupt raw bit for CHANNEL1. Triggered when transmitter sent more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch1_tx_thr_event_int_raw: 1;
|
|
/** ch2_tx_thr_event_int_raw : R/WTC/SS; bitpos: [10]; default: 0;
|
|
* The interrupt raw bit for CHANNEL2. Triggered when transmitter sent more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch2_tx_thr_event_int_raw: 1;
|
|
/** ch3_tx_thr_event_int_raw : R/WTC/SS; bitpos: [11]; default: 0;
|
|
* The interrupt raw bit for CHANNEL3. Triggered when transmitter sent more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch3_tx_thr_event_int_raw: 1;
|
|
/** ch0_tx_loop_int_raw : R/WTC/SS; bitpos: [12]; default: 0;
|
|
* The interrupt raw bit for CHANNEL0. Triggered when the loop count reaches the
|
|
* configured threshold value.
|
|
*/
|
|
uint32_t ch0_tx_loop_int_raw: 1;
|
|
/** ch1_tx_loop_int_raw : R/WTC/SS; bitpos: [13]; default: 0;
|
|
* The interrupt raw bit for CHANNEL1. Triggered when the loop count reaches the
|
|
* configured threshold value.
|
|
*/
|
|
uint32_t ch1_tx_loop_int_raw: 1;
|
|
/** ch2_tx_loop_int_raw : R/WTC/SS; bitpos: [14]; default: 0;
|
|
* The interrupt raw bit for CHANNEL2. Triggered when the loop count reaches the
|
|
* configured threshold value.
|
|
*/
|
|
uint32_t ch2_tx_loop_int_raw: 1;
|
|
/** ch3_tx_loop_int_raw : R/WTC/SS; bitpos: [15]; default: 0;
|
|
* The interrupt raw bit for CHANNEL3. Triggered when the loop count reaches the
|
|
* configured threshold value.
|
|
*/
|
|
uint32_t ch3_tx_loop_int_raw: 1;
|
|
/** ch4_rx_end_int_raw : R/WTC/SS; bitpos: [16]; default: 0;
|
|
* The interrupt raw bit for CHANNEL4. Triggered when reception done.
|
|
*/
|
|
uint32_t ch4_rx_end_int_raw: 1;
|
|
/** ch5_rx_end_int_raw : R/WTC/SS; bitpos: [17]; default: 0;
|
|
* The interrupt raw bit for CHANNEL5. Triggered when reception done.
|
|
*/
|
|
uint32_t ch5_rx_end_int_raw: 1;
|
|
/** ch6_rx_end_int_raw : R/WTC/SS; bitpos: [18]; default: 0;
|
|
* The interrupt raw bit for CHANNEL6. Triggered when reception done.
|
|
*/
|
|
uint32_t ch6_rx_end_int_raw: 1;
|
|
/** ch7_rx_end_int_raw : R/WTC/SS; bitpos: [19]; default: 0;
|
|
* The interrupt raw bit for CHANNEL7. Triggered when reception done.
|
|
*/
|
|
uint32_t ch7_rx_end_int_raw: 1;
|
|
/** ch4_err_int_raw : R/WTC/SS; bitpos: [20]; default: 0;
|
|
* The interrupt raw bit for CHANNEL4. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch4_err_int_raw: 1;
|
|
/** ch5_err_int_raw : R/WTC/SS; bitpos: [21]; default: 0;
|
|
* The interrupt raw bit for CHANNEL5. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch5_err_int_raw: 1;
|
|
/** ch6_err_int_raw : R/WTC/SS; bitpos: [22]; default: 0;
|
|
* The interrupt raw bit for CHANNEL6. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch6_err_int_raw: 1;
|
|
/** ch7_err_int_raw : R/WTC/SS; bitpos: [23]; default: 0;
|
|
* The interrupt raw bit for CHANNEL7. Triggered when error occurs.
|
|
*/
|
|
uint32_t ch7_err_int_raw: 1;
|
|
/** ch4_rx_thr_event_int_raw : R/WTC/SS; bitpos: [24]; default: 0;
|
|
* The interrupt raw bit for CHANNEL4. Triggered when receiver receive more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch4_rx_thr_event_int_raw: 1;
|
|
/** ch5_rx_thr_event_int_raw : R/WTC/SS; bitpos: [25]; default: 0;
|
|
* The interrupt raw bit for CHANNEL5. Triggered when receiver receive more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch5_rx_thr_event_int_raw: 1;
|
|
/** ch6_rx_thr_event_int_raw : R/WTC/SS; bitpos: [26]; default: 0;
|
|
* The interrupt raw bit for CHANNEL6. Triggered when receiver receive more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch6_rx_thr_event_int_raw: 1;
|
|
/** ch7_rx_thr_event_int_raw : R/WTC/SS; bitpos: [27]; default: 0;
|
|
* The interrupt raw bit for CHANNEL7. Triggered when receiver receive more data than
|
|
* configured value.
|
|
*/
|
|
uint32_t ch7_rx_thr_event_int_raw: 1;
|
|
/** ch3_dma_access_fail_int_raw : R/WTC/SS; bitpos: [28]; default: 0;
|
|
* The interrupt raw bit for CHANNEL3. Triggered when dma accessing CHANNEL3 fails.
|
|
*/
|
|
uint32_t ch3_dma_access_fail_int_raw: 1;
|
|
/** ch7_dma_access_fail_int_raw : R/WTC/SS; bitpos: [29]; default: 0;
|
|
* The interrupt raw bit for CHANNEL7. Triggered when dma accessing CHANNEL7 fails.
|
|
*/
|
|
uint32_t ch7_dma_access_fail_int_raw: 1;
|
|
uint32_t reserved_30: 2;
|
|
};
|
|
uint32_t val;
|
|
} rmt_int_raw_reg_t;
|
|
|
|
/** Type of int_st register
|
|
* Masked interrupt status
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** ch0_tx_end_int_st : RO; bitpos: [0]; default: 0;
|
|
* The masked interrupt status bit for CH0_TX_END_INT.
|
|
*/
|
|
uint32_t ch0_tx_end_int_st: 1;
|
|
/** ch1_tx_end_int_st : RO; bitpos: [1]; default: 0;
|
|
* The masked interrupt status bit for CH1_TX_END_INT.
|
|
*/
|
|
uint32_t ch1_tx_end_int_st: 1;
|
|
/** ch2_tx_end_int_st : RO; bitpos: [2]; default: 0;
|
|
* The masked interrupt status bit for CH2_TX_END_INT.
|
|
*/
|
|
uint32_t ch2_tx_end_int_st: 1;
|
|
/** ch3_tx_end_int_st : RO; bitpos: [3]; default: 0;
|
|
* The masked interrupt status bit for CH3_TX_END_INT.
|
|
*/
|
|
uint32_t ch3_tx_end_int_st: 1;
|
|
/** ch0_err_int_st : RO; bitpos: [4]; default: 0;
|
|
* The masked interrupt status bit for CH0_ERR_INT.
|
|
*/
|
|
uint32_t ch0_err_int_st: 1;
|
|
/** ch1_err_int_st : RO; bitpos: [5]; default: 0;
|
|
* The masked interrupt status bit for CH1_ERR_INT.
|
|
*/
|
|
uint32_t ch1_err_int_st: 1;
|
|
/** ch2_err_int_st : RO; bitpos: [6]; default: 0;
|
|
* The masked interrupt status bit for CH2_ERR_INT.
|
|
*/
|
|
uint32_t ch2_err_int_st: 1;
|
|
/** ch3_err_int_st : RO; bitpos: [7]; default: 0;
|
|
* The masked interrupt status bit for CH3_ERR_INT.
|
|
*/
|
|
uint32_t ch3_err_int_st: 1;
|
|
/** ch0_tx_thr_event_int_st : RO; bitpos: [8]; default: 0;
|
|
* The masked interrupt status bit for CH0_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch0_tx_thr_event_int_st: 1;
|
|
/** ch1_tx_thr_event_int_st : RO; bitpos: [9]; default: 0;
|
|
* The masked interrupt status bit for CH1_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch1_tx_thr_event_int_st: 1;
|
|
/** ch2_tx_thr_event_int_st : RO; bitpos: [10]; default: 0;
|
|
* The masked interrupt status bit for CH2_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch2_tx_thr_event_int_st: 1;
|
|
/** ch3_tx_thr_event_int_st : RO; bitpos: [11]; default: 0;
|
|
* The masked interrupt status bit for CH3_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch3_tx_thr_event_int_st: 1;
|
|
/** ch0_tx_loop_int_st : RO; bitpos: [12]; default: 0;
|
|
* The masked interrupt status bit for CH0_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch0_tx_loop_int_st: 1;
|
|
/** ch1_tx_loop_int_st : RO; bitpos: [13]; default: 0;
|
|
* The masked interrupt status bit for CH1_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch1_tx_loop_int_st: 1;
|
|
/** ch2_tx_loop_int_st : RO; bitpos: [14]; default: 0;
|
|
* The masked interrupt status bit for CH2_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch2_tx_loop_int_st: 1;
|
|
/** ch3_tx_loop_int_st : RO; bitpos: [15]; default: 0;
|
|
* The masked interrupt status bit for CH3_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch3_tx_loop_int_st: 1;
|
|
/** ch4_rx_end_int_st : RO; bitpos: [16]; default: 0;
|
|
* The masked interrupt status bit for CH4_RX_END_INT.
|
|
*/
|
|
uint32_t ch4_rx_end_int_st: 1;
|
|
/** ch5_rx_end_int_st : RO; bitpos: [17]; default: 0;
|
|
* The masked interrupt status bit for CH5_RX_END_INT.
|
|
*/
|
|
uint32_t ch5_rx_end_int_st: 1;
|
|
/** ch6_rx_end_int_st : RO; bitpos: [18]; default: 0;
|
|
* The masked interrupt status bit for CH6_RX_END_INT.
|
|
*/
|
|
uint32_t ch6_rx_end_int_st: 1;
|
|
/** ch7_rx_end_int_st : RO; bitpos: [19]; default: 0;
|
|
* The masked interrupt status bit for CH7_RX_END_INT.
|
|
*/
|
|
uint32_t ch7_rx_end_int_st: 1;
|
|
/** ch4_err_int_st : RO; bitpos: [20]; default: 0;
|
|
* The masked interrupt status bit for CH4_ERR_INT.
|
|
*/
|
|
uint32_t ch4_err_int_st: 1;
|
|
/** ch5_err_int_st : RO; bitpos: [21]; default: 0;
|
|
* The masked interrupt status bit for CH5_ERR_INT.
|
|
*/
|
|
uint32_t ch5_err_int_st: 1;
|
|
/** ch6_err_int_st : RO; bitpos: [22]; default: 0;
|
|
* The masked interrupt status bit for CH6_ERR_INT.
|
|
*/
|
|
uint32_t ch6_err_int_st: 1;
|
|
/** ch7_err_int_st : RO; bitpos: [23]; default: 0;
|
|
* The masked interrupt status bit for CH7_ERR_INT.
|
|
*/
|
|
uint32_t ch7_err_int_st: 1;
|
|
/** ch4_rx_thr_event_int_st : RO; bitpos: [24]; default: 0;
|
|
* The masked interrupt status bit for CH4_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch4_rx_thr_event_int_st: 1;
|
|
/** ch5_rx_thr_event_int_st : RO; bitpos: [25]; default: 0;
|
|
* The masked interrupt status bit for CH5_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch5_rx_thr_event_int_st: 1;
|
|
/** ch6_rx_thr_event_int_st : RO; bitpos: [26]; default: 0;
|
|
* The masked interrupt status bit for CH6_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch6_rx_thr_event_int_st: 1;
|
|
/** ch7_rx_thr_event_int_st : RO; bitpos: [27]; default: 0;
|
|
* The masked interrupt status bit for CH7_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch7_rx_thr_event_int_st: 1;
|
|
/** ch3_dma_access_fail_int_st : RO; bitpos: [28]; default: 0;
|
|
* The masked interrupt status bit for CH3_DMA_ACCESS_FAIL_INT.
|
|
*/
|
|
uint32_t ch3_dma_access_fail_int_st: 1;
|
|
/** ch7_dma_access_fail_int_st : RO; bitpos: [29]; default: 0;
|
|
* The masked interrupt status bit for CH7_DMA_ACCESS_FAIL_INT.
|
|
*/
|
|
uint32_t ch7_dma_access_fail_int_st: 1;
|
|
uint32_t reserved_30: 2;
|
|
};
|
|
uint32_t val;
|
|
} rmt_int_st_reg_t;
|
|
|
|
/** Type of int_ena register
|
|
* Interrupt enable bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** ch0_tx_end_int_ena : R/W; bitpos: [0]; default: 0;
|
|
* The interrupt enable bit for CH0_TX_END_INT.
|
|
*/
|
|
uint32_t ch0_tx_end_int_ena: 1;
|
|
/** ch1_tx_end_int_ena : R/W; bitpos: [1]; default: 0;
|
|
* The interrupt enable bit for CH1_TX_END_INT.
|
|
*/
|
|
uint32_t ch1_tx_end_int_ena: 1;
|
|
/** ch2_tx_end_int_ena : R/W; bitpos: [2]; default: 0;
|
|
* The interrupt enable bit for CH2_TX_END_INT.
|
|
*/
|
|
uint32_t ch2_tx_end_int_ena: 1;
|
|
/** ch3_tx_end_int_ena : R/W; bitpos: [3]; default: 0;
|
|
* The interrupt enable bit for CH3_TX_END_INT.
|
|
*/
|
|
uint32_t ch3_tx_end_int_ena: 1;
|
|
/** ch0_err_int_ena : R/W; bitpos: [4]; default: 0;
|
|
* The interrupt enable bit for CH0_ERR_INT.
|
|
*/
|
|
uint32_t ch0_err_int_ena: 1;
|
|
/** ch1_err_int_ena : R/W; bitpos: [5]; default: 0;
|
|
* The interrupt enable bit for CH1_ERR_INT.
|
|
*/
|
|
uint32_t ch1_err_int_ena: 1;
|
|
/** ch2_err_int_ena : R/W; bitpos: [6]; default: 0;
|
|
* The interrupt enable bit for CH2_ERR_INT.
|
|
*/
|
|
uint32_t ch2_err_int_ena: 1;
|
|
/** ch3_err_int_ena : R/W; bitpos: [7]; default: 0;
|
|
* The interrupt enable bit for CH3_ERR_INT.
|
|
*/
|
|
uint32_t ch3_err_int_ena: 1;
|
|
/** ch0_tx_thr_event_int_ena : R/W; bitpos: [8]; default: 0;
|
|
* The interrupt enable bit for CH0_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch0_tx_thr_event_int_ena: 1;
|
|
/** ch1_tx_thr_event_int_ena : R/W; bitpos: [9]; default: 0;
|
|
* The interrupt enable bit for CH1_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch1_tx_thr_event_int_ena: 1;
|
|
/** ch2_tx_thr_event_int_ena : R/W; bitpos: [10]; default: 0;
|
|
* The interrupt enable bit for CH2_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch2_tx_thr_event_int_ena: 1;
|
|
/** ch3_tx_thr_event_int_ena : R/W; bitpos: [11]; default: 0;
|
|
* The interrupt enable bit for CH3_TX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch3_tx_thr_event_int_ena: 1;
|
|
/** ch0_tx_loop_int_ena : R/W; bitpos: [12]; default: 0;
|
|
* The interrupt enable bit for CH0_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch0_tx_loop_int_ena: 1;
|
|
/** ch1_tx_loop_int_ena : R/W; bitpos: [13]; default: 0;
|
|
* The interrupt enable bit for CH1_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch1_tx_loop_int_ena: 1;
|
|
/** ch2_tx_loop_int_ena : R/W; bitpos: [14]; default: 0;
|
|
* The interrupt enable bit for CH2_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch2_tx_loop_int_ena: 1;
|
|
/** ch3_tx_loop_int_ena : R/W; bitpos: [15]; default: 0;
|
|
* The interrupt enable bit for CH3_TX_LOOP_INT.
|
|
*/
|
|
uint32_t ch3_tx_loop_int_ena: 1;
|
|
/** ch4_rx_end_int_ena : R/W; bitpos: [16]; default: 0;
|
|
* The interrupt enable bit for CH4_RX_END_INT.
|
|
*/
|
|
uint32_t ch4_rx_end_int_ena: 1;
|
|
/** ch5_rx_end_int_ena : R/W; bitpos: [17]; default: 0;
|
|
* The interrupt enable bit for CH5_RX_END_INT.
|
|
*/
|
|
uint32_t ch5_rx_end_int_ena: 1;
|
|
/** ch6_rx_end_int_ena : R/W; bitpos: [18]; default: 0;
|
|
* The interrupt enable bit for CH6_RX_END_INT.
|
|
*/
|
|
uint32_t ch6_rx_end_int_ena: 1;
|
|
/** ch7_rx_end_int_ena : R/W; bitpos: [19]; default: 0;
|
|
* The interrupt enable bit for CH7_RX_END_INT.
|
|
*/
|
|
uint32_t ch7_rx_end_int_ena: 1;
|
|
/** ch4_err_int_ena : R/W; bitpos: [20]; default: 0;
|
|
* The interrupt enable bit for CH4_ERR_INT.
|
|
*/
|
|
uint32_t ch4_err_int_ena: 1;
|
|
/** ch5_err_int_ena : R/W; bitpos: [21]; default: 0;
|
|
* The interrupt enable bit for CH5_ERR_INT.
|
|
*/
|
|
uint32_t ch5_err_int_ena: 1;
|
|
/** ch6_err_int_ena : R/W; bitpos: [22]; default: 0;
|
|
* The interrupt enable bit for CH6_ERR_INT.
|
|
*/
|
|
uint32_t ch6_err_int_ena: 1;
|
|
/** ch7_err_int_ena : R/W; bitpos: [23]; default: 0;
|
|
* The interrupt enable bit for CH7_ERR_INT.
|
|
*/
|
|
uint32_t ch7_err_int_ena: 1;
|
|
/** ch4_rx_thr_event_int_ena : R/W; bitpos: [24]; default: 0;
|
|
* The interrupt enable bit for CH4_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch4_rx_thr_event_int_ena: 1;
|
|
/** ch5_rx_thr_event_int_ena : R/W; bitpos: [25]; default: 0;
|
|
* The interrupt enable bit for CH5_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch5_rx_thr_event_int_ena: 1;
|
|
/** ch6_rx_thr_event_int_ena : R/W; bitpos: [26]; default: 0;
|
|
* The interrupt enable bit for CH6_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch6_rx_thr_event_int_ena: 1;
|
|
/** ch7_rx_thr_event_int_ena : R/W; bitpos: [27]; default: 0;
|
|
* The interrupt enable bit for CH7_RX_THR_EVENT_INT.
|
|
*/
|
|
uint32_t ch7_rx_thr_event_int_ena: 1;
|
|
/** ch3_dma_access_fail_int_ena : R/W; bitpos: [28]; default: 0;
|
|
* The interrupt enable bit for CH3_DMA_ACCESS_FAIL_INT.
|
|
*/
|
|
uint32_t ch3_dma_access_fail_int_ena: 1;
|
|
/** ch7_dma_access_fail_int_ena : R/W; bitpos: [29]; default: 0;
|
|
* The interrupt enable bit for CH7_DMA_ACCESS_FAIL_INT.
|
|
*/
|
|
uint32_t ch7_dma_access_fail_int_ena: 1;
|
|
uint32_t reserved_30: 2;
|
|
};
|
|
uint32_t val;
|
|
} rmt_int_ena_reg_t;
|
|
|
|
/** Type of int_clr register
|
|
* Interrupt clear bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** ch0_tx_end_int_clr : WT; bitpos: [0]; default: 0;
|
|
* Set this bit to clear theCH0_TX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch0_tx_end_int_clr: 1;
|
|
/** ch1_tx_end_int_clr : WT; bitpos: [1]; default: 0;
|
|
* Set this bit to clear theCH1_TX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch1_tx_end_int_clr: 1;
|
|
/** ch2_tx_end_int_clr : WT; bitpos: [2]; default: 0;
|
|
* Set this bit to clear theCH2_TX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch2_tx_end_int_clr: 1;
|
|
/** ch3_tx_end_int_clr : WT; bitpos: [3]; default: 0;
|
|
* Set this bit to clear theCH3_TX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch3_tx_end_int_clr: 1;
|
|
/** ch0_err_int_clr : WT; bitpos: [4]; default: 0;
|
|
* Set this bit to clear theCH0_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch0_err_int_clr: 1;
|
|
/** ch1_err_int_clr : WT; bitpos: [5]; default: 0;
|
|
* Set this bit to clear theCH1_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch1_err_int_clr: 1;
|
|
/** ch2_err_int_clr : WT; bitpos: [6]; default: 0;
|
|
* Set this bit to clear theCH2_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch2_err_int_clr: 1;
|
|
/** ch3_err_int_clr : WT; bitpos: [7]; default: 0;
|
|
* Set this bit to clear theCH3_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch3_err_int_clr: 1;
|
|
/** ch0_tx_thr_event_int_clr : WT; bitpos: [8]; default: 0;
|
|
* Set this bit to clear theCH0_TX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch0_tx_thr_event_int_clr: 1;
|
|
/** ch1_tx_thr_event_int_clr : WT; bitpos: [9]; default: 0;
|
|
* Set this bit to clear theCH1_TX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch1_tx_thr_event_int_clr: 1;
|
|
/** ch2_tx_thr_event_int_clr : WT; bitpos: [10]; default: 0;
|
|
* Set this bit to clear theCH2_TX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch2_tx_thr_event_int_clr: 1;
|
|
/** ch3_tx_thr_event_int_clr : WT; bitpos: [11]; default: 0;
|
|
* Set this bit to clear theCH3_TX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch3_tx_thr_event_int_clr: 1;
|
|
/** ch0_tx_loop_int_clr : WT; bitpos: [12]; default: 0;
|
|
* Set this bit to clear theCH0_TX_LOOP_INT interrupt.
|
|
*/
|
|
uint32_t ch0_tx_loop_int_clr: 1;
|
|
/** ch1_tx_loop_int_clr : WT; bitpos: [13]; default: 0;
|
|
* Set this bit to clear theCH1_TX_LOOP_INT interrupt.
|
|
*/
|
|
uint32_t ch1_tx_loop_int_clr: 1;
|
|
/** ch2_tx_loop_int_clr : WT; bitpos: [14]; default: 0;
|
|
* Set this bit to clear theCH2_TX_LOOP_INT interrupt.
|
|
*/
|
|
uint32_t ch2_tx_loop_int_clr: 1;
|
|
/** ch3_tx_loop_int_clr : WT; bitpos: [15]; default: 0;
|
|
* Set this bit to clear theCH3_TX_LOOP_INT interrupt.
|
|
*/
|
|
uint32_t ch3_tx_loop_int_clr: 1;
|
|
/** ch4_rx_end_int_clr : WT; bitpos: [16]; default: 0;
|
|
* Set this bit to clear theCH4_RX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch4_rx_end_int_clr: 1;
|
|
/** ch5_rx_end_int_clr : WT; bitpos: [17]; default: 0;
|
|
* Set this bit to clear theCH5_RX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch5_rx_end_int_clr: 1;
|
|
/** ch6_rx_end_int_clr : WT; bitpos: [18]; default: 0;
|
|
* Set this bit to clear theCH6_RX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch6_rx_end_int_clr: 1;
|
|
/** ch7_rx_end_int_clr : WT; bitpos: [19]; default: 0;
|
|
* Set this bit to clear theCH7_RX_END_INT interrupt.
|
|
*/
|
|
uint32_t ch7_rx_end_int_clr: 1;
|
|
/** ch4_err_int_clr : WT; bitpos: [20]; default: 0;
|
|
* Set this bit to clear theCH4_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch4_err_int_clr: 1;
|
|
/** ch5_err_int_clr : WT; bitpos: [21]; default: 0;
|
|
* Set this bit to clear theCH5_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch5_err_int_clr: 1;
|
|
/** ch6_err_int_clr : WT; bitpos: [22]; default: 0;
|
|
* Set this bit to clear theCH6_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch6_err_int_clr: 1;
|
|
/** ch7_err_int_clr : WT; bitpos: [23]; default: 0;
|
|
* Set this bit to clear theCH7_ERR_INT interrupt.
|
|
*/
|
|
uint32_t ch7_err_int_clr: 1;
|
|
/** ch4_rx_thr_event_int_clr : WT; bitpos: [24]; default: 0;
|
|
* Set this bit to clear theCH4_RX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch4_rx_thr_event_int_clr: 1;
|
|
/** ch5_rx_thr_event_int_clr : WT; bitpos: [25]; default: 0;
|
|
* Set this bit to clear theCH5_RX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch5_rx_thr_event_int_clr: 1;
|
|
/** ch6_rx_thr_event_int_clr : WT; bitpos: [26]; default: 0;
|
|
* Set this bit to clear theCH6_RX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch6_rx_thr_event_int_clr: 1;
|
|
/** ch7_rx_thr_event_int_clr : WT; bitpos: [27]; default: 0;
|
|
* Set this bit to clear theCH7_RX_THR_EVENT_INT interrupt.
|
|
*/
|
|
uint32_t ch7_rx_thr_event_int_clr: 1;
|
|
/** ch3_dma_access_fail_int_clr : WT; bitpos: [28]; default: 0;
|
|
* Set this bit to clear the CH3_DMA_ACCESS_FAIL_INT interrupt.
|
|
*/
|
|
uint32_t ch3_dma_access_fail_int_clr: 1;
|
|
/** ch7_dma_access_fail_int_clr : WT; bitpos: [29]; default: 0;
|
|
* Set this bit to clear the CH7_DMA_ACCESS_FAIL_INT interrupt.
|
|
*/
|
|
uint32_t ch7_dma_access_fail_int_clr: 1;
|
|
uint32_t reserved_30: 2;
|
|
};
|
|
uint32_t val;
|
|
} rmt_int_clr_reg_t;
|
|
|
|
|
|
/** Group: Carrier wave duty cycle registers */
|
|
/** Type of chncarrier_duty register
|
|
* Channel n duty cycle configuration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** carrier_low_chn : R/W; bitpos: [15:0]; default: 64;
|
|
* This register is used to configure carrier wave 's low level clock period for
|
|
* CHANNELn.
|
|
*/
|
|
uint32_t carrier_low_chn: 16;
|
|
/** carrier_high_chn : R/W; bitpos: [31:16]; default: 64;
|
|
* This register is used to configure carrier wave 's high level clock period for
|
|
* CHANNELn.
|
|
*/
|
|
uint32_t carrier_high_chn: 16;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chncarrier_duty_reg_t;
|
|
|
|
|
|
/** Group: Tx event configuration registers */
|
|
/** Type of chn_tx_lim register
|
|
* Channel n Tx event configuration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_lim_chn : R/W; bitpos: [8:0]; default: 128;
|
|
* This register is used to configure the maximum entries that CHANNELn can send out.
|
|
*/
|
|
uint32_t tx_lim_chn: 9;
|
|
/** tx_loop_num_chn : R/W; bitpos: [18:9]; default: 0;
|
|
* This register is used to configure the maximum loop count when tx_conti_mode is
|
|
* valid.
|
|
*/
|
|
uint32_t tx_loop_num_chn: 10;
|
|
/** tx_loop_cnt_en_chn : R/W; bitpos: [19]; default: 0;
|
|
* This register is the enabled bit for loop count.
|
|
*/
|
|
uint32_t tx_loop_cnt_en_chn: 1;
|
|
/** loop_count_reset_chn : WT; bitpos: [20]; default: 0;
|
|
* This register is used to reset the loop count when tx_conti_mode is valid.
|
|
*/
|
|
uint32_t loop_count_reset_chn: 1;
|
|
/** loop_stop_en_chn : R/W; bitpos: [21]; default: 0;
|
|
* This bit is used to enable the loop send stop function after the loop counter
|
|
* counts to loop number for CHANNELn.
|
|
*/
|
|
uint32_t loop_stop_en_chn: 1;
|
|
uint32_t reserved_22: 10;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chn_tx_lim_reg_t;
|
|
|
|
/** Type of tx_sim register
|
|
* RMT TX synchronous register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_sim_ch0 : R/W; bitpos: [0]; default: 0;
|
|
* Set this bit to enable CHANNEL0 to start sending data synchronously with other
|
|
* enabled channels.
|
|
*/
|
|
uint32_t tx_sim_ch0: 1;
|
|
/** tx_sim_ch1 : R/W; bitpos: [1]; default: 0;
|
|
* Set this bit to enable CHANNEL1 to start sending data synchronously with other
|
|
* enabled channels.
|
|
*/
|
|
uint32_t tx_sim_ch1: 1;
|
|
/** tx_sim_ch2 : R/W; bitpos: [2]; default: 0;
|
|
* Set this bit to enable CHANNEL2 to start sending data synchronously with other
|
|
* enabled channels.
|
|
*/
|
|
uint32_t tx_sim_ch2: 1;
|
|
/** tx_sim_ch3 : R/W; bitpos: [3]; default: 0;
|
|
* Set this bit to enable CHANNEL3 to start sending data synchronously with other
|
|
* enabled channels.
|
|
*/
|
|
uint32_t tx_sim_ch3: 1;
|
|
/** tx_sim_en : R/W; bitpos: [4]; default: 0;
|
|
* This register is used to enable multiple of channels to start sending data
|
|
* synchronously.
|
|
*/
|
|
uint32_t tx_sim_en: 1;
|
|
uint32_t reserved_5: 27;
|
|
};
|
|
uint32_t val;
|
|
} rmt_tx_sim_reg_t;
|
|
|
|
|
|
/** Group: Rx event configuration registers */
|
|
/** Type of chm_rx_lim register
|
|
* Channel m Rx event configuration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** rx_lim_chm : R/W; bitpos: [8:0]; default: 128;
|
|
* This register is used to configure the maximum entries that CHANNELm can receive.
|
|
*/
|
|
uint32_t rx_lim_chm: 9;
|
|
uint32_t reserved_9: 23;
|
|
};
|
|
uint32_t val;
|
|
} rmt_chm_rx_lim_reg_t;
|
|
|
|
|
|
/** Group: Version register */
|
|
/** Type of date register
|
|
* RMT version register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** date : R/W; bitpos: [27:0]; default: 34607489;
|
|
* This is the version register.
|
|
*/
|
|
uint32_t date: 28;
|
|
uint32_t reserved_28: 4;
|
|
};
|
|
uint32_t val;
|
|
} rmt_date_reg_t;
|
|
|
|
|
|
typedef struct rmt_dev_t {
|
|
volatile rmt_chndata_reg_t chndata[4];
|
|
volatile rmt_chmdata_reg_t chmdata[4];
|
|
volatile rmt_chnconf0_reg_t chnconf0[4];
|
|
volatile struct {
|
|
rmt_chmconf0_reg_t conf0;
|
|
rmt_chmconf1_reg_t conf1;
|
|
} chmconf[4];
|
|
volatile rmt_chnstatus_reg_t chnstatus[4];
|
|
volatile rmt_chmstatus_reg_t chmstatus[4];
|
|
volatile rmt_int_raw_reg_t int_raw;
|
|
volatile rmt_int_st_reg_t int_st;
|
|
volatile rmt_int_ena_reg_t int_ena;
|
|
volatile rmt_int_clr_reg_t int_clr;
|
|
volatile rmt_chncarrier_duty_reg_t chncarrier_duty[4];
|
|
volatile rmt_chm_rx_carrier_rm_reg_t chm_rx_carrier_rm[4];
|
|
volatile rmt_chn_tx_lim_reg_t chn_tx_lim[4];
|
|
volatile rmt_chm_rx_lim_reg_t chm_rx_lim[4];
|
|
volatile rmt_sys_conf_reg_t sys_conf;
|
|
volatile rmt_tx_sim_reg_t tx_sim;
|
|
volatile rmt_ref_cnt_rst_reg_t ref_cnt_rst;
|
|
volatile rmt_date_reg_t date;
|
|
} rmt_dev_t;
|
|
|
|
#ifndef __cplusplus
|
|
_Static_assert(sizeof(rmt_dev_t) == 0xd0, "Invalid size of rmt_dev_t structure");
|
|
#endif
|
|
|
|
extern rmt_dev_t RMT;
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|