kopia lustrzana https://github.com/espressif/esp-idf
744 wiersze
28 KiB
C
744 wiersze
28 KiB
C
/*
|
||
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
|
||
*
|
||
* SPDX-License-Identifier: Apache-2.0
|
||
*/
|
||
#pragma once
|
||
|
||
#include <stdbool.h>
|
||
#include <stddef.h>
|
||
#include <stdint.h>
|
||
#include "soc/soc.h"
|
||
#include "soc/clk_tree_defs.h"
|
||
|
||
#ifdef __cplusplus
|
||
extern "C" {
|
||
#endif
|
||
|
||
/************************************************************************************/
|
||
/***************** THIS FILE IS CONSIDERED AS A PRIVATE HEADER FILE *****************/
|
||
/*** IT IS NOT RECOMMENDED TO USE THE APIS IN THIS FILE DIRECTLY IN APPLICATIONS ****/
|
||
/************************************************************************************/
|
||
|
||
/**
|
||
* @file rtc.h
|
||
* @brief Low-level RTC power, clock, and sleep functions.
|
||
*
|
||
* Functions in this file facilitate configuration of ESP32C2's RTC_CNTL peripheral.
|
||
* RTC_CNTL peripheral handles many functions:
|
||
* - enables/disables clocks and power to various parts of the chip; this is
|
||
* done using direct register access (forcing power up or power down) or by
|
||
* allowing state machines to control power and clocks automatically
|
||
* - handles sleep and wakeup functions
|
||
* - maintains a 48-bit counter which can be used for timekeeping
|
||
*
|
||
* These functions are not thread safe, and should not be viewed as high level
|
||
* APIs. For example, while this file provides a function which can switch
|
||
* CPU frequency, this function is on its own is not sufficient to implement
|
||
* frequency switching in ESP-IDF context: some coordination with RTOS,
|
||
* peripheral drivers, and WiFi/BT stacks is also required.
|
||
*
|
||
* These functions will normally not be used in applications directly.
|
||
* ESP-IDF provides, or will provide, drivers and other facilities to use
|
||
* RTC subsystem functionality.
|
||
*
|
||
* The functions are loosely split into the following groups:
|
||
* - rtc_clk: clock switching, calibration
|
||
* - rtc_time: reading RTC counter, conversion between counter values and time
|
||
* - rtc_sleep: entry into sleep modes
|
||
* - rtc_init: initialization
|
||
*/
|
||
|
||
#define MHZ (1000000)
|
||
|
||
#define RTC_SLOW_CLK_X32K_CAL_TIMEOUT_THRES(cycles) (cycles << 12)
|
||
#define RTC_SLOW_CLK_8MD256_CAL_TIMEOUT_THRES(cycles) (cycles << 12)
|
||
#define RTC_SLOW_CLK_150K_CAL_TIMEOUT_THRES(cycles) (cycles << 10)
|
||
|
||
#define OTHER_BLOCKS_POWERUP 1
|
||
#define OTHER_BLOCKS_WAIT 1
|
||
|
||
/* Approximate mapping of voltages to RTC_CNTL_DBIAS_WAK, RTC_CNTL_DBIAS_SLP,
|
||
* RTC_CNTL_DIG_DBIAS_WAK, RTC_CNTL_DIG_DBIAS_SLP values.
|
||
*/
|
||
#define RTC_CNTL_DBIAS_SLP 5 //sleep dig_dbias & rtc_dbias
|
||
#define RTC_CNTL_DBIAS_0V90 13 //digital voltage
|
||
#define RTC_CNTL_DBIAS_0V95 16
|
||
#define RTC_CNTL_DBIAS_1V00 18
|
||
#define RTC_CNTL_DBIAS_1V05 20
|
||
#define RTC_CNTL_DBIAS_1V10 23
|
||
#define RTC_CNTL_DBIAS_1V15 25
|
||
#define RTC_CNTL_DBIAS_1V20 28
|
||
#define RTC_CNTL_DBIAS_1V25 30
|
||
#define RTC_CNTL_DBIAS_1V30 31 //voltage is about 1.34v in fact
|
||
|
||
/* Delays for various clock sources to be enabled/switched.
|
||
* All values are in microseconds.
|
||
*/
|
||
#define SOC_DELAY_RTC_FAST_CLK_SWITCH 3
|
||
#define SOC_DELAY_RTC_SLOW_CLK_SWITCH 300
|
||
#define SOC_DELAY_RC_FAST_ENABLE 50
|
||
#define SOC_DELAY_RC_FAST_DIGI_SWITCH 5
|
||
|
||
/* Core voltage (to be supported) */
|
||
#define DIG_DBIAS_80M RTC_CNTL_DBIAS_1V20
|
||
#define DIG_DBIAS_120M RTC_CNTL_DBIAS_1V20
|
||
#define DIG_DBIAS_XTAL RTC_CNTL_DBIAS_1V10
|
||
#define DIG_DBIAS_2M RTC_CNTL_DBIAS_1V00
|
||
|
||
#define RTC_CNTL_PLL_BUF_WAIT_DEFAULT 20
|
||
#define RTC_CNTL_XTL_BUF_WAIT_DEFAULT 100
|
||
#define RTC_CNTL_CK8M_WAIT_DEFAULT 20 // Equivalent macro as `CLK_LL_RC_FAST_WAIT_DEFAULT`
|
||
#define RTC_CK8M_ENABLE_WAIT_DEFAULT 5 // Equivalent macro as `CLK_LL_RC_FAST_ENABLE_WAIT_DEFAULT`
|
||
|
||
#define RTC_CNTL_CK8M_DFREQ_DEFAULT 100
|
||
#define RTC_CNTL_SCK_DCAP_DEFAULT 255
|
||
|
||
/* Various delays to be programmed into power control state machines */
|
||
#define RTC_CNTL_XTL_BUF_WAIT_SLP_US (1000)
|
||
#define RTC_CNTL_PLL_BUF_WAIT_SLP_CYCLES (1)
|
||
#define RTC_CNTL_CK8M_WAIT_SLP_CYCLES (4)
|
||
#define RTC_CNTL_WAKEUP_DELAY_CYCLES (5)
|
||
#define RTC_CNTL_OTHER_BLOCKS_POWERUP_CYCLES (1)
|
||
#define RTC_CNTL_OTHER_BLOCKS_WAIT_CYCLES (1)
|
||
#define RTC_CNTL_MIN_SLP_VAL_MIN (2)
|
||
|
||
/*
|
||
set sleep_init default param
|
||
*/
|
||
#define RTC_CNTL_DBG_ATTEN_LIGHTSLEEP_DEFAULT 5
|
||
#define RTC_CNTL_DBG_ATTEN_LIGHTSLEEP_NODROP 0
|
||
#define RTC_CNTL_DBG_ATTEN_DEEPSLEEP_DEFAULT 15
|
||
#define RTC_CNTL_DBG_ATTEN_DEEPSLEEP_NODROP 0
|
||
#define RTC_CNTL_BIASSLP_SLEEP_DEFAULT 1
|
||
#define RTC_CNTL_BIASSLP_SLEEP_ON 0
|
||
#define RTC_CNTL_PD_CUR_SLEEP_DEFAULT 1
|
||
#define RTC_CNTL_PD_CUR_SLEEP_ON 0
|
||
#define RTC_CNTL_DG_VDD_DRV_B_SLP_DEFAULT 254
|
||
|
||
#define RTC_CNTL_DBG_ATTEN_MONITOR_DEFAULT 0
|
||
#define RTC_CNTL_BIASSLP_MONITOR_DEFAULT 0
|
||
#define RTC_CNTL_PD_CUR_MONITOR_DEFAULT 0
|
||
|
||
/*
|
||
use together with RTC_CNTL_DBG_ATTEN_DEEPSLEEP_DEFAULT
|
||
*/
|
||
#define RTC_CNTL_RTC_DBIAS_DEEPSLEEP_0V7 30
|
||
|
||
/*
|
||
use together with RTC_CNTL_DBG_ATTEN_LIGHTSLEEP_DEFAULT
|
||
*/
|
||
#define RTC_CNTL_RTC_DBIAS_LIGHTSLEEP_0V6 5
|
||
#define RTC_CNTL_DIG_DBIAS_LIGHTSLEEP_0V6 5
|
||
|
||
/*
|
||
The follow value is used to get a reasonable rtc voltage dbias value according to digital dbias & some other value
|
||
storing in efuse (based on ATE 5k ECO3 chips)
|
||
*/
|
||
#define K_RTC_MID_MUL10000 215
|
||
#define K_DIG_MID_MUL10000 213
|
||
#define V_RTC_MID_MUL10000 10800
|
||
#define V_DIG_MID_MUL10000 10860
|
||
|
||
/**
|
||
* @brief CPU clock configuration structure
|
||
*/
|
||
typedef struct rtc_cpu_freq_config_s {
|
||
soc_cpu_clk_src_t source; //!< The clock from which CPU clock is derived
|
||
uint32_t source_freq_mhz; //!< Source clock frequency
|
||
uint32_t div; //!< Divider, freq_mhz = source_freq_mhz / div
|
||
uint32_t freq_mhz; //!< CPU clock frequency
|
||
} rtc_cpu_freq_config_t;
|
||
|
||
#define RTC_CLK_CAL_FRACT 19 //!< Number of fractional bits in values returned by rtc_clk_cal
|
||
|
||
#define RTC_VDDSDIO_TIEH_1_8V 0 //!< TIEH field value for 1.8V VDDSDIO
|
||
#define RTC_VDDSDIO_TIEH_3_3V 1 //!< TIEH field value for 3.3V VDDSDIO
|
||
|
||
/**
|
||
* @brief Clock source to be calibrated using rtc_clk_cal function
|
||
*/
|
||
typedef enum {
|
||
RTC_CAL_RTC_MUX = 0, //!< Currently selected RTC SLOW_CLK
|
||
RTC_CAL_8MD256 = 1, //!< Internal 8 MHz RC oscillator, divided by 256
|
||
RTC_CAL_32K_OSC_SLOW = 2, //!< External 32.768 KHz CLK
|
||
|
||
// deprecated name
|
||
RTC_CAL_EXT_32K __attribute__((deprecated)) = RTC_CAL_32K_OSC_SLOW,
|
||
} rtc_cal_sel_t;
|
||
|
||
/**
|
||
* Initialization parameters for rtc_clk_init
|
||
*/
|
||
typedef struct {
|
||
soc_xtal_freq_t xtal_freq : 8; //!< Main XTAL frequency
|
||
uint32_t cpu_freq_mhz : 10; //!< CPU frequency to set, in MHz
|
||
soc_rtc_fast_clk_src_t fast_clk_src : 2; //!< RTC_FAST_CLK clock source to choose
|
||
soc_rtc_slow_clk_src_t slow_clk_src : 2; //!< RTC_SLOW_CLK clock source to choose
|
||
uint32_t clk_rtc_clk_div : 8;
|
||
uint32_t clk_8m_clk_div : 3; //!< RTC 8M clock divider (division is by clk_8m_div+1, i.e. 0 means 8MHz frequency)
|
||
uint32_t slow_clk_dcap : 8; //!< RTC 150k clock adjustment parameter (higher value leads to lower frequency)
|
||
uint32_t clk_8m_dfreq : 8; //!< RTC 8m clock adjustment parameter (higher value leads to higher frequency)
|
||
} rtc_clk_config_t;
|
||
|
||
/**
|
||
* Default initializer for rtc_clk_config_t
|
||
*/
|
||
#define RTC_CLK_CONFIG_DEFAULT() { \
|
||
.xtal_freq = CONFIG_XTAL_FREQ, \
|
||
.cpu_freq_mhz = 80, \
|
||
.fast_clk_src = SOC_RTC_FAST_CLK_SRC_RC_FAST, \
|
||
.slow_clk_src = SOC_RTC_SLOW_CLK_SRC_RC_SLOW, \
|
||
.clk_rtc_clk_div = 0, \
|
||
.clk_8m_clk_div = 1, \
|
||
.slow_clk_dcap = RTC_CNTL_SCK_DCAP_DEFAULT, \
|
||
.clk_8m_dfreq = RTC_CNTL_CK8M_DFREQ_DEFAULT, \
|
||
}
|
||
|
||
typedef struct {
|
||
uint16_t wifi_powerup_cycles : 7;
|
||
uint16_t wifi_wait_cycles : 9;
|
||
uint16_t bt_powerup_cycles : 7;
|
||
uint16_t bt_wait_cycles : 9;
|
||
uint16_t cpu_top_powerup_cycles : 7;
|
||
uint16_t cpu_top_wait_cycles : 9;
|
||
uint16_t dg_wrap_powerup_cycles : 7;
|
||
uint16_t dg_wrap_wait_cycles : 9;
|
||
uint16_t dg_peri_powerup_cycles : 7;
|
||
uint16_t dg_peri_wait_cycles : 9;
|
||
} rtc_init_config_t;
|
||
|
||
#define RTC_INIT_CONFIG_DEFAULT() { \
|
||
.wifi_powerup_cycles = OTHER_BLOCKS_POWERUP, \
|
||
.wifi_wait_cycles = OTHER_BLOCKS_WAIT, \
|
||
.bt_powerup_cycles = OTHER_BLOCKS_POWERUP, \
|
||
.bt_wait_cycles = OTHER_BLOCKS_WAIT, \
|
||
.cpu_top_powerup_cycles = OTHER_BLOCKS_POWERUP, \
|
||
.cpu_top_wait_cycles = OTHER_BLOCKS_WAIT, \
|
||
.dg_wrap_powerup_cycles = OTHER_BLOCKS_POWERUP, \
|
||
.dg_wrap_wait_cycles = OTHER_BLOCKS_WAIT, \
|
||
.dg_peri_powerup_cycles = OTHER_BLOCKS_POWERUP, \
|
||
.dg_peri_wait_cycles = OTHER_BLOCKS_WAIT, \
|
||
}
|
||
|
||
void rtc_clk_divider_set(uint32_t div);
|
||
|
||
void rtc_clk_8m_divider_set(uint32_t div);
|
||
|
||
/**
|
||
* Initialize clocks and set CPU frequency
|
||
*
|
||
* @param cfg clock configuration as rtc_clk_config_t
|
||
*/
|
||
void rtc_clk_init(rtc_clk_config_t cfg);
|
||
|
||
/**
|
||
* @brief Get main XTAL frequency
|
||
*
|
||
* This is the value stored in RTC register RTC_XTAL_FREQ_REG by the bootloader. As passed to
|
||
* rtc_clk_init function
|
||
*
|
||
* @return XTAL frequency, one of soc_xtal_freq_t
|
||
*/
|
||
soc_xtal_freq_t rtc_clk_xtal_freq_get(void);
|
||
|
||
/**
|
||
* @brief Update XTAL frequency
|
||
*
|
||
* Updates the XTAL value stored in RTC_XTAL_FREQ_REG. Usually this value is ignored
|
||
* after startup.
|
||
*
|
||
* @param xtal_freq New frequency value
|
||
*/
|
||
void rtc_clk_xtal_freq_update(soc_xtal_freq_t xtal_freq);
|
||
|
||
/**
|
||
* @brief Enable 32KHz external oscillator
|
||
*/
|
||
void rtc_clk_32k_enable_external(void);
|
||
|
||
/**
|
||
* @brief Enable or disable 8 MHz internal oscillator
|
||
*
|
||
* Output from 8 MHz internal oscillator is passed into a configurable
|
||
* divider, which by default divides the input clock frequency by 256.
|
||
* Output of the divider may be used as RTC_SLOW_CLK source.
|
||
* Output of the divider is referred to in register descriptions and code as
|
||
* 8md256 or simply d256. Divider values other than 256 may be configured, but
|
||
* this facility is not currently needed, so is not exposed in the code.
|
||
*
|
||
* When 8MHz/256 divided output is not needed, the divider should be disabled
|
||
* to reduce power consumption.
|
||
*
|
||
* @param clk_8m_en true to enable 8MHz generator
|
||
* @param d256_en true to enable /256 divider
|
||
*/
|
||
void rtc_clk_8m_enable(bool clk_8m_en, bool d256_en);
|
||
|
||
/**
|
||
* @brief Get the state of 8 MHz internal oscillator
|
||
* @return true if the oscillator is enabled
|
||
*/
|
||
bool rtc_clk_8m_enabled(void);
|
||
|
||
/**
|
||
* @brief Get the state of /256 divider which is applied to 8MHz clock
|
||
* @return true if the divided output is enabled
|
||
*/
|
||
bool rtc_clk_8md256_enabled(void);
|
||
|
||
/**
|
||
* @brief Select source for RTC_SLOW_CLK
|
||
* @param clk_src clock source (one of soc_rtc_slow_clk_src_t values)
|
||
*/
|
||
void rtc_clk_slow_src_set(soc_rtc_slow_clk_src_t clk_src);
|
||
|
||
/**
|
||
* @brief Get the RTC_SLOW_CLK source
|
||
* @return currently selected clock source (one of soc_rtc_slow_clk_src_t values)
|
||
*/
|
||
soc_rtc_slow_clk_src_t rtc_clk_slow_src_get(void);
|
||
|
||
/**
|
||
* @brief Get the approximate frequency of RTC_SLOW_CLK, in Hz
|
||
*
|
||
* - if SOC_RTC_SLOW_CLK_SRC_RC_SLOW is selected, returns ~150000
|
||
* - if SOC_RTC_SLOW_CLK_SRC_OSC_SLOW is selected, returns 32768
|
||
* - if SOC_RTC_SLOW_CLK_SRC_RC_FAST_D256 is selected, returns ~68000
|
||
*
|
||
* rtc_clk_cal function can be used to get more precise value by comparing
|
||
* RTC_SLOW_CLK frequency to the frequency of main XTAL.
|
||
*
|
||
* @return RTC_SLOW_CLK frequency, in Hz
|
||
*/
|
||
uint32_t rtc_clk_slow_freq_get_hz(void);
|
||
|
||
/**
|
||
* @brief Select source for RTC_FAST_CLK
|
||
* @param clk_src clock source (one of soc_rtc_fast_clk_src_t values)
|
||
*/
|
||
void rtc_clk_fast_src_set(soc_rtc_fast_clk_src_t clk_src);
|
||
|
||
/**
|
||
* @brief Get the RTC_FAST_CLK source
|
||
* @return currently selected clock source (one of soc_rtc_fast_clk_src_t values)
|
||
*/
|
||
soc_rtc_fast_clk_src_t rtc_clk_fast_src_get(void);
|
||
|
||
/**
|
||
* @brief Get CPU frequency config for a given frequency
|
||
* @param freq_mhz Frequency in MHz
|
||
* @param[out] out_config Output, CPU frequency configuration structure
|
||
* @return true if frequency can be obtained, false otherwise
|
||
*/
|
||
bool rtc_clk_cpu_freq_mhz_to_config(uint32_t freq_mhz, rtc_cpu_freq_config_t *out_config);
|
||
|
||
/**
|
||
* @brief Switch CPU frequency
|
||
*
|
||
* This function sets CPU frequency according to the given configuration
|
||
* structure. It enables PLLs, if necessary.
|
||
*
|
||
* @note This function in not intended to be called by applications in FreeRTOS
|
||
* environment. This is because it does not adjust various timers based on the
|
||
* new CPU frequency.
|
||
*
|
||
* @param config CPU frequency configuration structure
|
||
*/
|
||
void rtc_clk_cpu_freq_set_config(const rtc_cpu_freq_config_t *config);
|
||
|
||
/**
|
||
* @brief Switch CPU frequency (optimized for speed)
|
||
*
|
||
* This function is a faster equivalent of rtc_clk_cpu_freq_set_config.
|
||
* It works faster because it does not disable PLLs when switching from PLL to
|
||
* XTAL and does not enabled them when switching back. If PLL is not already
|
||
* enabled when this function is called to switch from XTAL to PLL frequency,
|
||
* or the PLL which is enabled is the wrong one, this function will fall back
|
||
* to calling rtc_clk_cpu_freq_set_config.
|
||
*
|
||
* Unlike rtc_clk_cpu_freq_set_config, this function relies on static data,
|
||
* so it is less safe to use it e.g. from a panic handler (when memory might
|
||
* be corrupted).
|
||
*
|
||
* @note This function in not intended to be called by applications in FreeRTOS
|
||
* environment. This is because it does not adjust various timers based on the
|
||
* new CPU frequency.
|
||
*
|
||
* @param config CPU frequency configuration structure
|
||
*/
|
||
void rtc_clk_cpu_freq_set_config_fast(const rtc_cpu_freq_config_t *config);
|
||
|
||
/**
|
||
* @brief Get the currently used CPU frequency configuration
|
||
* @param[out] out_config Output, CPU frequency configuration structure
|
||
*/
|
||
void rtc_clk_cpu_freq_get_config(rtc_cpu_freq_config_t *out_config);
|
||
|
||
/**
|
||
* @brief Switch CPU clock source to XTAL
|
||
*
|
||
* Short form for filling in rtc_cpu_freq_config_t structure and calling
|
||
* rtc_clk_cpu_freq_set_config when a switch to XTAL is needed.
|
||
* Assumes that XTAL frequency has been determined — don't call in startup code.
|
||
*/
|
||
void rtc_clk_cpu_freq_set_xtal(void);
|
||
|
||
/**
|
||
* @brief Store new APB frequency value into RTC_APB_FREQ_REG
|
||
*
|
||
* This function doesn't change any hardware clocks.
|
||
*
|
||
* Functions which perform frequency switching and change APB frequency call
|
||
* this function to update the value of APB frequency stored in RTC_APB_FREQ_REG
|
||
* (one of RTC general purpose retention registers). This should not normally
|
||
* be called from application code.
|
||
*
|
||
* @param apb_freq new APB frequency, in Hz
|
||
*/
|
||
void rtc_clk_apb_freq_update(uint32_t apb_freq);
|
||
|
||
/**
|
||
* @brief Get the current stored APB frequency.
|
||
* @return The APB frequency value as last set via rtc_clk_apb_freq_update(), in Hz.
|
||
*/
|
||
uint32_t rtc_clk_apb_freq_get(void);
|
||
|
||
uint32_t rtc_clk_cal_internal(rtc_cal_sel_t cal_clk, uint32_t slowclk_cycles);
|
||
|
||
/**
|
||
* @brief Measure RTC slow clock's period, based on main XTAL frequency
|
||
*
|
||
* This function will time out and return 0 if the time for the given number
|
||
* of cycles to be counted exceeds the expected time twice. This may happen if
|
||
* 32k XTAL is being calibrated, but the oscillator has not started up (due to
|
||
* incorrect loading capacitance, board design issue, or lack of 32 XTAL on board).
|
||
*
|
||
* @note When 32k CLK is being calibrated, this function will check the accuracy
|
||
* of the clock. Since the xtal 32k or ext osc 32k is generally very stable, if
|
||
* the check fails, then consider this an invalid 32k clock and return 0. This
|
||
* check can filter some jamming signal.
|
||
*
|
||
* @param cal_clk clock to be measured
|
||
* @param slow_clk_cycles number of slow clock cycles to average
|
||
* @return average slow clock period in microseconds, Q13.19 fixed point format,
|
||
* or 0 if calibration has timed out
|
||
*/
|
||
uint32_t rtc_clk_cal(rtc_cal_sel_t cal_clk, uint32_t slow_clk_cycles);
|
||
|
||
/**
|
||
* @brief Measure ratio between XTAL frequency and RTC slow clock frequency
|
||
* @param cal_clk slow clock to be measured
|
||
* @param slow_clk_cycles number of slow clock cycles to average
|
||
* @return average ratio between XTAL frequency and slow clock frequency,
|
||
* Q13.19 fixed point format, or 0 if calibration has timed out.
|
||
*/
|
||
uint32_t rtc_clk_cal_ratio(rtc_cal_sel_t cal_clk, uint32_t slow_clk_cycles);
|
||
|
||
/**
|
||
* @brief Convert time interval from microseconds to RTC_SLOW_CLK cycles
|
||
* @param time_in_us Time interval in microseconds
|
||
* @param slow_clk_period Period of slow clock in microseconds, Q13.19
|
||
* fixed point format (as returned by rtc_slowck_cali).
|
||
* @return number of slow clock cycles
|
||
*/
|
||
uint64_t rtc_time_us_to_slowclk(uint64_t time_in_us, uint32_t period);
|
||
|
||
/**
|
||
* @brief Convert time interval from RTC_SLOW_CLK to microseconds
|
||
* @param time_in_us Time interval in RTC_SLOW_CLK cycles
|
||
* @param slow_clk_period Period of slow clock in microseconds, Q13.19
|
||
* fixed point format (as returned by rtc_slowck_cali).
|
||
* @return time interval in microseconds
|
||
*/
|
||
uint64_t rtc_time_slowclk_to_us(uint64_t rtc_cycles, uint32_t period);
|
||
|
||
/**
|
||
* @brief Get current value of RTC counter
|
||
*
|
||
* RTC has a 48-bit counter which is incremented by 2 every 2 RTC_SLOW_CLK
|
||
* cycles. Counter value is not writable by software. The value is not adjusted
|
||
* when switching to a different RTC_SLOW_CLK source.
|
||
*
|
||
* Note: this function may take up to 1 RTC_SLOW_CLK cycle to execute
|
||
*
|
||
* @return current value of RTC counter
|
||
*/
|
||
uint64_t rtc_time_get(void);
|
||
|
||
/**
|
||
* @brief Busy loop until next RTC_SLOW_CLK cycle
|
||
*
|
||
* This function returns not earlier than the next RTC_SLOW_CLK clock cycle.
|
||
* In some cases (e.g. when RTC_SLOW_CLK cycle is very close), it may return
|
||
* one RTC_SLOW_CLK cycle later.
|
||
*/
|
||
void rtc_clk_wait_for_slow_cycle(void);
|
||
|
||
/**
|
||
* @brief Enable the rtc digital 8M clock
|
||
*
|
||
* This function is used to enable the digital rtc 8M clock to support peripherals.
|
||
* For enabling the analog 8M clock, using `rtc_clk_8M_enable` function above.
|
||
*/
|
||
void rtc_dig_clk8m_enable(void);
|
||
|
||
/**
|
||
* @brief Disable the rtc digital 8M clock
|
||
*
|
||
* This function is used to disable the digital rtc 8M clock, which is only used to support peripherals.
|
||
*/
|
||
void rtc_dig_clk8m_disable(void);
|
||
|
||
/**
|
||
* @brief Get whether the rtc digital 8M clock is enabled
|
||
*/
|
||
bool rtc_dig_8m_enabled(void);
|
||
|
||
/**
|
||
* @brief Calculate the real clock value after the clock calibration
|
||
*
|
||
* @param cal_val Average slow clock period in microseconds, fixed point value as returned from `rtc_clk_cal`
|
||
* @return Frequency of the clock in Hz
|
||
*/
|
||
uint32_t rtc_clk_freq_cal(uint32_t cal_val);
|
||
|
||
/**
|
||
* @brief Power down flags for rtc_sleep_pd function
|
||
*/
|
||
typedef struct {
|
||
uint32_t dig_fpu : 1; //!< Set to 1 to power UP digital part in sleep
|
||
uint32_t rtc_fpu : 1; //!< Set to 1 to power UP RTC memories in sleep
|
||
uint32_t cpu_fpu : 1; //!< Set to 1 to power UP digital memories and CPU in sleep
|
||
uint32_t bb_fpu : 1; //!< Set to 1 to power UP WiFi in sleep
|
||
uint32_t nrx_fpu : 1; //!< Set to 1 to power UP WiFi in sleep
|
||
uint32_t fe_fpu : 1; //!< Set to 1 to power UP WiFi in sleep
|
||
uint32_t sram_fpu : 1; //!< Set to 1 to power UP SRAM in sleep
|
||
uint32_t rom_ram_fpu : 1; //!< Set to 1 to power UP ROM/IRAM0_DRAM0 in sleep
|
||
} rtc_sleep_pu_config_t;
|
||
|
||
/**
|
||
* Initializer for rtc_sleep_pu_config_t which sets all flags to the same value
|
||
*/
|
||
#define RTC_SLEEP_PU_CONFIG_ALL(val) {\
|
||
.dig_fpu = (val), \
|
||
.rtc_fpu = (val), \
|
||
.cpu_fpu = (val), \
|
||
.bb_fpu = (val), \
|
||
.nrx_fpu = (val), \
|
||
.fe_fpu = (val), \
|
||
.sram_fpu = (val), \
|
||
.rom_ram_fpu = (val), \
|
||
}
|
||
|
||
void rtc_sleep_pu(rtc_sleep_pu_config_t cfg);
|
||
|
||
/**
|
||
* @brief sleep configuration for rtc_sleep_init function
|
||
*/
|
||
typedef struct {
|
||
uint32_t lslp_mem_inf_fpu : 1; //!< force normal voltage in sleep mode (digital domain memory)
|
||
uint32_t int_8m_pd_en : 1; //!< Power down Internal 8M oscillator
|
||
uint32_t deep_slp : 1; //!< power down digital domain
|
||
uint32_t wdt_flashboot_mod_en : 1; //!< enable WDT flashboot mode
|
||
uint32_t dig_dbias_slp : 5; //!< set bias for digital domain, in sleep mode
|
||
uint32_t rtc_dbias_slp : 5; //!< set bias for RTC domain, in sleep mode
|
||
uint32_t dbg_atten_slp : 4; //!< voltage parameter, in sleep mode
|
||
uint32_t bias_sleep_slp : 1; //!< circuit control parameter, in sleep mode
|
||
uint32_t pd_cur_slp : 1; //!< circuit control parameter, in sleep mode
|
||
uint32_t vddsdio_pd_en : 1; //!< power down VDDSDIO regulator
|
||
uint32_t xtal_fpu : 1; //!< keep main XTAL powered up in sleep
|
||
uint32_t rtc_regulator_fpu : 1; //!< keep rtc regulator powered up in sleep
|
||
uint32_t deep_slp_reject : 1; //!< enable deep sleep reject
|
||
uint32_t light_slp_reject : 1; //!< enable light sleep reject
|
||
} rtc_sleep_config_t;
|
||
|
||
#define RTC_SLEEP_PD_DIG BIT(0) //!< Deep sleep (power down digital domain)
|
||
#define RTC_SLEEP_PD_VDDSDIO BIT(5) //!< Power down VDDSDIO regulator
|
||
#define RTC_SLEEP_PD_INT_8M BIT(10) //!< Power down Internal 8M oscillator
|
||
#define RTC_SLEEP_PD_XTAL BIT(11) //!< Power down main XTAL
|
||
|
||
//These flags are not power domains, but will affect some sleep parameters
|
||
#define RTC_SLEEP_DIG_USE_8M BIT(16)
|
||
#define RTC_SLEEP_USE_ADC_TESEN_MONITOR BIT(17)
|
||
#define RTC_SLEEP_NO_ULTRA_LOW BIT(18) //!< Avoid using ultra low power in deep sleep, in which RTCIO cannot be used as input, and RTCMEM can't work under high temperature
|
||
|
||
/**
|
||
* Default initializer for rtc_sleep_config_t
|
||
*
|
||
* This initializer sets all fields to "reasonable" values (e.g. suggested for
|
||
* production use) based on a combination of RTC_SLEEP_PD_x flags.
|
||
*
|
||
* @param RTC_SLEEP_PD_x flags combined using bitwise OR
|
||
*/
|
||
void rtc_sleep_get_default_config(uint32_t sleep_flags, rtc_sleep_config_t *out_config);
|
||
|
||
/**
|
||
* @brief Prepare the chip to enter sleep mode
|
||
*
|
||
* This function configures various power control state machines to handle
|
||
* entry into light sleep or deep sleep mode, switches APB and CPU clock source
|
||
* (usually to XTAL), and sets bias voltages for digital and RTC power domains.
|
||
*
|
||
* This function does not actually enter sleep mode; this is done using
|
||
* rtc_sleep_start function. Software may do some other actions between
|
||
* rtc_sleep_init and rtc_sleep_start, such as set wakeup timer and configure
|
||
* wakeup sources.
|
||
* @param cfg sleep mode configuration
|
||
*/
|
||
void rtc_sleep_init(rtc_sleep_config_t cfg);
|
||
|
||
/**
|
||
* @brief Low level initialize for rtc state machine waiting cycles after waking up
|
||
*
|
||
* This function configures the cycles chip need to wait for internal 8MHz
|
||
* oscillator and external 40MHz crystal. As we configure fixed time for waiting
|
||
* crystal, we need to pass period to calculate cycles. Now this function only
|
||
* used in lightsleep mode.
|
||
*
|
||
* @param slowclk_period re-calibrated slow clock period
|
||
*/
|
||
void rtc_sleep_low_init(uint32_t slowclk_period);
|
||
|
||
#define RTC_GPIO_TRIG_EN BIT(2) //!< GPIO wakeup
|
||
#define RTC_TIMER_TRIG_EN BIT(3) //!< Timer wakeup
|
||
#define RTC_WIFI_TRIG_EN BIT(5) //!< WIFI wakeup (light sleep only)
|
||
#define RTC_UART0_TRIG_EN BIT(6) //!< UART0 wakeup (light sleep only)
|
||
#define RTC_UART1_TRIG_EN BIT(7) //!< UART1 wakeup (light sleep only)
|
||
#define RTC_BT_TRIG_EN BIT(10) //!< BT wakeup (light sleep only)
|
||
#define RTC_XTAL32K_DEAD_TRIG_EN BIT(12)
|
||
#define RTC_USB_TRIG_EN BIT(14)
|
||
#define RTC_BROWNOUT_DET_TRIG_EN BIT(16)
|
||
|
||
/**
|
||
* RTC_SLEEP_REJECT_MASK records sleep reject sources supported by chip
|
||
*/
|
||
#define RTC_SLEEP_REJECT_MASK (RTC_GPIO_TRIG_EN | \
|
||
RTC_TIMER_TRIG_EN | \
|
||
RTC_WIFI_TRIG_EN | \
|
||
RTC_UART0_TRIG_EN | \
|
||
RTC_UART1_TRIG_EN | \
|
||
RTC_BT_TRIG_EN | \
|
||
RTC_XTAL32K_DEAD_TRIG_EN | \
|
||
RTC_USB_TRIG_EN | \
|
||
RTC_BROWNOUT_DET_TRIG_EN)
|
||
|
||
/**
|
||
* @brief Enter deep or light sleep mode
|
||
*
|
||
* This function enters the sleep mode previously configured using rtc_sleep_init
|
||
* function. Before entering sleep, software should configure wake up sources
|
||
* appropriately (set up GPIO wakeup registers, timer wakeup registers,
|
||
* and so on).
|
||
*
|
||
* If deep sleep mode was configured using rtc_sleep_init, and sleep is not
|
||
* rejected by hardware (based on reject_opt flags), this function never returns.
|
||
* When the chip wakes up from deep sleep, CPU is reset and execution starts
|
||
* from ROM bootloader.
|
||
*
|
||
* If light sleep mode was configured using rtc_sleep_init, this function
|
||
* returns on wakeup, or if sleep is rejected by hardware.
|
||
*
|
||
* @param wakeup_opt bit mask wake up reasons to enable (RTC_xxx_TRIG_EN flags
|
||
* combined with OR)
|
||
* @param reject_opt bit mask of sleep reject reasons:
|
||
* - RTC_CNTL_GPIO_REJECT_EN
|
||
* - RTC_CNTL_SDIO_REJECT_EN
|
||
* These flags are used to prevent entering sleep when e.g.
|
||
* an external host is communicating via SDIO slave
|
||
* @return non-zero if sleep was rejected by hardware
|
||
*/
|
||
uint32_t rtc_sleep_start(uint32_t wakeup_opt, uint32_t reject_opt, uint32_t lslp_mem_inf_fpu);
|
||
|
||
/**
|
||
* RTC power and clock control initialization settings
|
||
*/
|
||
typedef struct {
|
||
uint32_t ck8m_wait : 8; //!< Number of rtc_fast_clk cycles to wait for 8M clock to be ready
|
||
uint32_t xtal_wait : 8; //!< Number of rtc_fast_clk cycles to wait for XTAL clock to be ready
|
||
uint32_t pll_wait : 8; //!< Number of rtc_fast_clk cycles to wait for PLL to be ready
|
||
uint32_t clkctl_init : 1; //!< Perform clock control related initialization
|
||
uint32_t pwrctl_init : 1; //!< Perform power control related initialization
|
||
uint32_t rtc_dboost_fpd : 1; //!< Force power down RTC_DBOOST
|
||
uint32_t xtal_fpu : 1;
|
||
uint32_t bbpll_fpu : 1;
|
||
uint32_t cpu_waiti_clk_gate : 1;
|
||
uint32_t cali_ocode : 1; //!< Calibrate Ocode to make bangap voltage more precise.
|
||
} rtc_config_t;
|
||
|
||
/**
|
||
* Default initializer of rtc_config_t.
|
||
*
|
||
* This initializer sets all fields to "reasonable" values (e.g. suggested for
|
||
* production use).
|
||
*/
|
||
#define RTC_CONFIG_DEFAULT() {\
|
||
.ck8m_wait = RTC_CNTL_CK8M_WAIT_DEFAULT, \
|
||
.xtal_wait = RTC_CNTL_XTL_BUF_WAIT_DEFAULT, \
|
||
.pll_wait = RTC_CNTL_PLL_BUF_WAIT_DEFAULT, \
|
||
.clkctl_init = 1, \
|
||
.pwrctl_init = 1, \
|
||
.rtc_dboost_fpd = 1, \
|
||
.xtal_fpu = 0, \
|
||
.bbpll_fpu = 0, \
|
||
.cpu_waiti_clk_gate = 1, \
|
||
.cali_ocode = 0\
|
||
}
|
||
|
||
/**
|
||
* Initialize RTC clock and power control related functions
|
||
* @param cfg configuration options as rtc_config_t
|
||
*/
|
||
void rtc_init(rtc_config_t cfg);
|
||
|
||
// -------------------------- CLOCK TREE DEFS ALIAS ----------------------------
|
||
// **WARNING**: The following are only for backwards compatibility.
|
||
// Please use the declarations in soc/clk_tree_defs.h instead.
|
||
/**
|
||
* @brief CPU clock source
|
||
*/
|
||
typedef soc_cpu_clk_src_t rtc_cpu_freq_src_t;
|
||
#define RTC_CPU_FREQ_SRC_XTAL SOC_CPU_CLK_SRC_XTAL //!< XTAL
|
||
#define RTC_CPU_FREQ_SRC_PLL SOC_CPU_CLK_SRC_PLL //!< PLL (480M)
|
||
#define RTC_CPU_FREQ_SRC_8M SOC_CPU_CLK_SRC_RC_FAST //!< Internal 17.5M RTC oscillator
|
||
|
||
/**
|
||
* @brief RTC SLOW_CLK frequency values
|
||
*/
|
||
typedef soc_rtc_slow_clk_src_t rtc_slow_freq_t;
|
||
#define RTC_SLOW_FREQ_RTC SOC_RTC_SLOW_CLK_SRC_RC_SLOW //!< Internal 150 kHz RC oscillator
|
||
#define RTC_SLOW_FREQ_EXT_CLK SOC_RTC_SLOW_CLK_SRC_OSC_SLOW //!< External clock input by pin0 with frequency no more than 150k
|
||
#define RTC_SLOW_FREQ_8MD256 SOC_RTC_SLOW_CLK_SRC_RC_FAST_D256 //!< Internal 17.5 MHz RC oscillator, divided by 256
|
||
|
||
/**
|
||
* @brief RTC FAST_CLK frequency values
|
||
*/
|
||
typedef soc_rtc_fast_clk_src_t rtc_fast_freq_t;
|
||
#define RTC_FAST_FREQ_XTALD4 SOC_RTC_FAST_CLK_SRC_XTAL_DIV //!< Main XTAL, divided by 2
|
||
#define RTC_FAST_FREQ_8M SOC_RTC_FAST_CLK_SRC_RC_FAST //!< Internal 17.5 MHz RC oscillator
|
||
|
||
/**
|
||
* @brief Possible main XTAL frequency values.
|
||
*/
|
||
typedef soc_xtal_freq_t rtc_xtal_freq_t;
|
||
#define RTC_XTAL_FREQ_40M SOC_XTAL_FREQ_40M //!< 40 MHz XTAL
|
||
#define RTC_XTAL_FREQ_32M SOC_XTAL_FREQ_32M //!< 32 MHz XTAL
|
||
#define RTC_XTAL_FREQ_26M SOC_XTAL_FREQ_26M //!< 26 MHz XTAL
|
||
|
||
/* Alias of frequency related macros */
|
||
#define RTC_FAST_CLK_FREQ_APPROX SOC_CLK_RC_FAST_FREQ_APPROX
|
||
#define RTC_FAST_CLK_FREQ_8M SOC_CLK_RC_FAST_FREQ_APPROX
|
||
#define RTC_SLOW_CLK_FREQ_150K SOC_CLK_RC_SLOW_FREQ_APPROX
|
||
#define RTC_SLOW_CLK_FREQ_8MD256 SOC_CLK_RC_FAST_D256_FREQ_APPROX
|
||
#define RTC_SLOW_CLK_FREQ_EXT SOC_CLK_OSC_SLOW_FREQ_APPROX
|
||
|
||
/* Alias of deprecated function names */
|
||
#define rtc_clk_slow_freq_set(slow_freq) rtc_clk_slow_src_set(slow_freq)
|
||
#define rtc_clk_slow_freq_get() rtc_clk_slow_src_get()
|
||
#define rtc_clk_fast_freq_set(fast_freq) rtc_clk_fast_src_set(fast_freq)
|
||
#define rtc_clk_fast_freq_get() rtc_clk_fast_src_get()
|
||
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|