esp-idf/components/hal/include/hal/i2c_types.h

117 wiersze
3.4 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "soc/soc_caps.h"
#include "soc/clk_tree_defs.h"
#include "hal/hal_utils.h"
/**
* @brief I2C port number, can be I2C_NUM_0 ~ (I2C_NUM_MAX-1).
*/
typedef enum {
I2C_NUM_0 = 0, /*!< I2C port 0 */
#if SOC_I2C_NUM >= 2
I2C_NUM_1, /*!< I2C port 1 */
#endif /* SOC_I2C_NUM >= 2 */
#if SOC_LP_I2C_NUM >= 1
LP_I2C_NUM_0, /*< LP_I2C port 0 */
#endif /* SOC_LP_I2C_NUM >= 1 */
I2C_NUM_MAX, /*!< I2C port max */
} i2c_port_t;
/**
* @brief Enumeration for I2C device address bit length
*/
typedef enum {
I2C_ADDR_BIT_LEN_7 = 0, /*!< i2c address bit length 7 */
#if SOC_I2C_SUPPORT_10BIT_ADDR
I2C_ADDR_BIT_LEN_10 = 1, /*!< i2c address bit length 10 */
#endif
} i2c_addr_bit_len_t;
/**
* @brief Data structure for calculating I2C bus timing.
*/
typedef struct {
uint16_t clkm_div; /*!< I2C core clock devider */
uint16_t scl_low; /*!< I2C scl low period */
uint16_t scl_high; /*!< I2C scl hight period */
uint16_t scl_wait_high; /*!< I2C scl wait_high period */
uint16_t sda_hold; /*!< I2C scl low period */
uint16_t sda_sample; /*!< I2C sda sample time */
uint16_t setup; /*!< I2C start and stop condition setup period */
uint16_t hold; /*!< I2C start and stop condition hold period */
uint16_t tout; /*!< I2C bus timeout period */
} i2c_hal_clk_config_t;
typedef enum{
#if SOC_I2C_SUPPORT_SLAVE
I2C_MODE_SLAVE = 0, /*!< I2C slave mode */
#endif
I2C_MODE_MASTER, /*!< I2C master mode */
I2C_MODE_MAX,
} i2c_mode_t;
typedef enum {
I2C_MASTER_WRITE = 0, /*!< I2C write data */
I2C_MASTER_READ, /*!< I2C read data */
} i2c_rw_t;
typedef enum {
I2C_DATA_MODE_MSB_FIRST = 0, /*!< I2C data msb first */
I2C_DATA_MODE_LSB_FIRST = 1, /*!< I2C data lsb first */
I2C_DATA_MODE_MAX
} i2c_trans_mode_t;
__attribute__((deprecated("please use 'i2c_addr_bit_len_t' instead")))
typedef enum {
I2C_ADDR_BIT_7 = 0, /*!< I2C 7bit address for slave mode */
I2C_ADDR_BIT_10, /*!< I2C 10bit address for slave mode */
I2C_ADDR_BIT_MAX,
} i2c_addr_mode_t;
typedef enum {
I2C_MASTER_ACK = 0x0, /*!< I2C ack for each byte read */
I2C_MASTER_NACK = 0x1, /*!< I2C nack for each byte read */
I2C_MASTER_LAST_NACK = 0x2, /*!< I2C nack for the last byte*/
I2C_MASTER_ACK_MAX,
} i2c_ack_type_t;
/**
* @brief Enum for I2C slave stretch causes
*/
typedef enum {
I2C_SLAVE_STRETCH_CAUSE_ADDRESS_MATCH = 0, /*!< Stretching SCL low when the slave is read by the master and the address just matched */
I2C_SLAVE_STRETCH_CAUSE_TX_EMPTY = 1, /*!< Stretching SCL low when TX FIFO is empty in slave mode */
I2C_SLAVE_STRETCH_CAUSE_RX_FULL = 2, /*!< Stretching SCL low when RX FIFO is full in slave mode */
I2C_SLAVE_STRETCH_CAUSE_SENDING_ACK = 3, /*!< Stretching SCL low when slave sending ACK */
} i2c_slave_stretch_cause_t;
#if SOC_I2C_SUPPORTED
/**
* @brief I2C group clock source
*/
typedef soc_periph_i2c_clk_src_t i2c_clock_source_t;
#else
/**
* @brief Default type
*/
typedef int i2c_clock_source_t;
#endif
#ifdef __cplusplus
}
#endif