mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/protocols/https_x509_bundle
Historia
Mahavir Jain 6a89ca77e1 fix(examples): update root certificate for howsmyssl endpoint 
This fixes CI failure seen because of cert migration of howsmyssl
endpoint from previous "DST Root CA X3" (cross-signed) to "ISRG Root X1".
 		2024-04-12 11:12:06 +08:00
..
certs fix(examples): update root certificate for howsmyssl endpoint 2024-04-12 11:12:06 +08:00
main protocols: Updated examples to use correct API 2022-04-20 12:18:26 +05:30
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
README.md protocols/examples: Disable Wifi connection if not supported 2023-07-12 06:19:20 +00:00
pytest_https_x509_bundle.py CI: enable more wifi cases 2023-01-06 06:03:52 +00:00
sdkconfig.ci ci: fix https_x509 example 2022-11-02 14:57:14 +05:30
sdkconfig.ci.ssldyn ci: fix https_x509 example 2022-11-02 14:57:14 +05:30
sdkconfig.defaults Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00

README.md

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-S2 ESP32-S3

HTTPS x509 Bundle Example

This example shows how to use the ESP certificate bundle utility to embed a bundle of x509 certificates and use them to establish a simple HTTPS connection over a secure connection. The path of the certificates are specified using menuconfig.

See the README.md file in the upper level 'examples' directory for more information about examples.

Example workflow

  • ESP TLS is initialized with the certificate bundle option enabled.
  • The application loops through the given URLs, establishing a secure TLS connection to all of them, verifying the server certificate included.

Configure the project

  • Open the project configuration menu (idf.py menuconfig)
  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
  • If using a different folder than certs for storing certificates then update Custom Certificate Bundle Path under Component config - mbedTLS - Certificate Bundle

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (0) cpu_start: Starting scheduler on APP CPU.
I (491) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (4051) example_connect: Ethernet Link Up
I (5971) esp_netif_handlers: eth ip: 192.168.2.137, mask: 255.255.255.0, gw: 192.168.2.2
I (5971) example_connect: Connected to Ethernet
I (5971) example_connect: IPv4 address: 192.168.2.137
I (5971) example_connect: IPv6 address: fe80:0000:0000:0000:bedd:c2ff:fed4:a92b
I (5981) example: Connecting to 2 URLs
I (7100) esp-x509-crt-bundle: Certificate validated
I (8371) example: Connection established to https://www.howsmyssl.com/a/check
I (11730) esp-x509-crt-bundle: Certificate validated
I (11821) example: Connection established to https://espressif.com
I (12821) example: Completed 2 connections
I (12821) example: Starting over again...