esp-idf/components/esp_system/ld/esp32c6/memory.ld.in

124 wiersze
4.8 KiB
Plaintext

/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* ESP32-C6 Linker Script Memory Layout
* This file describes the memory layout (memory blocks) by virtual memory addresses.
* This linker script is passed through the C preprocessor to include configuration options.
* Please use preprocessor features sparingly!
* Restrict to simple macros with numeric values, and/or #if/#endif blocks.
*/
#include "sdkconfig.h"
#include "ld.common"
#define SRAM_SEG_START 0x40800000
#define SRAM_SEG_END 0x4086E610 /* 2nd stage bootloader iram_loader_seg start address */
#define SRAM_SEG_SIZE SRAM_SEG_END - SRAM_SEG_START
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/*
* IDRAM0_2_SEG_SIZE_DEFAULT is used when page size is 64KB
*/
#define IDRAM0_2_SEG_SIZE (CONFIG_MMU_PAGE_SIZE << 8)
#endif
MEMORY
{
/**
* All these values assume the flash cache is on, and have the blocks this uses subtracted from the length
* of the various regions. The 'data access port' dram/drom regions map to the same iram/irom regions but
* are connected to the data port of the CPU and eg allow byte-wise access.
*/
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/* Flash mapped instruction data */
irom_seg (RX) : org = 0x42000020, len = IDRAM0_2_SEG_SIZE - 0x20
/**
* (0x20 offset above is a convenience for the app binary image generation.
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
* header. Setting this offset makes it simple to meet the flash cache MMU's
* constraint that (paddr % 64KB == vaddr % 64KB).)
*/
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* Shared data RAM, excluding memory reserved for ROM bss/data/stack.
* Enabling Bluetooth & Trace Memory features in menuconfig will decrease the amount of RAM available.
*/
sram_seg (RWX) : org = SRAM_SEG_START, len = SRAM_SEG_SIZE
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/* Flash mapped constant data */
drom_seg (R) : org = 0x42000020, len = IDRAM0_2_SEG_SIZE - 0x20
/* (See irom_seg for meaning of 0x20 offset in the above.) */
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* lp ram memory (RWX). Persists over deep sleep. // TODO: IDF-5667
*/
#if CONFIG_ULP_COPROC_ENABLED
lp_ram_seg(RW) : org = 0x50000000 + CONFIG_ULP_COPROC_RESERVE_MEM,
len = 0x4000 - CONFIG_ULP_COPROC_RESERVE_MEM - RESERVE_RTC_MEM
#else
lp_ram_seg(RW) : org = 0x50000000, len = 0x4000 - RESERVE_RTC_MEM
#endif // CONFIG_ULP_COPROC_ENABLED
/* We reduced the size of lp_ram_seg by RESERVE_RTC_MEM value.
It reserves the amount of LP memory that we use for this memory segment.
This segment is intended for keeping:
- (lower addr) rtc timer data (s_rtc_timer_retain_mem, see esp_clk.c files).
- (higher addr) bootloader rtc data (s_bootloader_retain_mem, when a Kconfig option is on).
The aim of this is to keep data that will not be moved around and have a fixed address.
*/
lp_reserved_seg(RW) : org = 0x50000000 + 0x4000 - RESERVE_RTC_MEM, len = RESERVE_RTC_MEM
}
/* Heap ends at top of sram_seg */
_heap_end = 0x40000000;
_data_seg_org = ORIGIN(rtc_data_seg);
/**
* The lines below define location alias for .rtc.data section
* C6 has no distinguished LP(RTC) fast and slow memory sections, instead, there is a unified LP_RAM section
* Thus, the following region segments are not configurable like on other targets
*/
REGION_ALIAS("rtc_iram_seg", lp_ram_seg );
REGION_ALIAS("rtc_data_seg", rtc_iram_seg );
REGION_ALIAS("rtc_slow_seg", rtc_iram_seg );
REGION_ALIAS("rtc_data_location", rtc_iram_seg );
REGION_ALIAS("rtc_reserved_seg", lp_reserved_seg );
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_code_seg", irom_seg);
#else
REGION_ALIAS("default_code_seg", sram_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_rodata_seg", drom_seg);
#else
REGION_ALIAS("default_rodata_seg", sram_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* If rodata default segment is placed in `drom_seg`, then flash's first rodata section must
* also be first in the segment.
*/
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
ASSERT(_flash_rodata_dummy_start == ORIGIN(default_rodata_seg),
".flash_rodata_dummy section must be placed at the beginning of the rodata segment.")
#endif
#if CONFIG_ESP_SYSTEM_USE_EH_FRAME
ASSERT ((__eh_frame_end > __eh_frame), "Error: eh_frame size is null!");
ASSERT ((__eh_frame_hdr_end > __eh_frame_hdr), "Error: eh_frame_hdr size is null!");
#endif