kopia lustrzana https://github.com/espressif/esp-idf
1280 wiersze
47 KiB
ReStructuredText
1280 wiersze
47 KiB
ReStructuredText
{IDF_TARGET_NAME} ULP coprocessor instruction set
|
|
=================================================
|
|
|
|
This document provides details about the instructions used by {IDF_TARGET_NAME} ULP FSM coprocessor assembler.
|
|
|
|
ULP FSM coprocessor has 4 16-bit general purpose registers, labeled R0, R1, R2, R3. It also has an 8-bit counter register (stage_cnt) which can be used to implement loops. Stage count register is accessed using special instructions.
|
|
|
|
ULP coprocessor can access 8k bytes of RTC_SLOW_MEM memory region. Memory is addressed in 32-bit word units. It can also access peripheral registers in RTC_CNTL, RTC_IO, and SENS peripherals.
|
|
|
|
All instructions are 32-bit. Jump instructions, ALU instructions, peripheral register and memory access instructions are executed in 1 cycle. Instructions which work with peripherals (TSENS, ADC, I2C) take variable number of cycles, depending on peripheral operation.
|
|
|
|
The instruction syntax is case insensitive. Upper and lower case letters can be used and intermixed arbitrarily. This is true both for register names and instruction names.
|
|
|
|
.. _ulp-fsm-addressing:
|
|
|
|
Note about addressing
|
|
---------------------
|
|
{IDF_TARGET_NAME} ULP FSM coprocessor's ``JUMP``, ``ST``, ``LD`` family of instructions expect the address argument to be expressed in the following way depending on the type of address argument used:
|
|
|
|
- When the address argument is presented as a label then the instruction expects the address to be expressed as 32-bit words.
|
|
|
|
Consider the following example program::
|
|
|
|
entry:
|
|
NOP
|
|
NOP
|
|
NOP
|
|
NOP
|
|
loop:
|
|
MOVE R1, loop
|
|
JUMP R1
|
|
|
|
When this program is assembled and linked, address of label ``loop`` will be equal to 16 (expressed in bytes). However `JUMP` instruction expects the address stored in register ``R1`` to be expressed in 32-bit words. To account for this common use case, the assembler will convert the address of label `loop` from bytes to words, when generating the ``MOVE`` instruction. Hence, the code generated code will be equivalent to::
|
|
|
|
0000 NOP
|
|
0004 NOP
|
|
0008 NOP
|
|
000c NOP
|
|
0010 MOVE R1, 4
|
|
0014 JUMP R1
|
|
|
|
- The other case is when the argument of ``MOVE`` instruction is not a label but a constant. In this case assembler will **use the value as is**, without any conversion::
|
|
|
|
.set val, 0x10
|
|
MOVE R1, val
|
|
|
|
In this case, value loaded into ``R1`` will be ``0x10``.
|
|
|
|
However, when an immediate value is used as an offset in ``LD`` and ``ST`` instructions, the assembler considers the address argument in bytes and converts it to 32-bit words before executing the instruction::
|
|
|
|
ST R1, R2, 4 // offset = 4 bytes; Mem[R2 + 4 / 4] = R1
|
|
|
|
In this case, the value in R1 is stored at the memory location pointed by [R2 + offset / 4]
|
|
|
|
Consider the following code::
|
|
|
|
.global array
|
|
array: .long 0
|
|
.long 0
|
|
.long 0
|
|
.long 0
|
|
|
|
MOVE R1, array
|
|
MOVE R2, 0x1234
|
|
ST R2, R1, 0 // write value of R2 into the first array element,
|
|
// i.e. array[0]
|
|
|
|
ST R2, R1, 4 // write value of R2 into the second array element
|
|
// (4 byte offset), i.e. array[1]
|
|
|
|
ADD R1, R1, 2 // this increments address by 2 words (8 bytes)
|
|
ST R2, R1, 0 // write value of R2 into the third array element,
|
|
// i.e. array[2]
|
|
|
|
Note about instruction execution time
|
|
-------------------------------------
|
|
|
|
ULP coprocessor is clocked from RTC_FAST_CLK, which is normally derived from the internal 8MHz oscillator. Applications which need to know exact ULP clock frequency can calibrate it against the main XTAL clock::
|
|
|
|
#include "soc/rtc.h"
|
|
|
|
// calibrate 8M/256 clock against XTAL, get 8M/256 clock period
|
|
uint32_t rtc_8md256_period = rtc_clk_cal(RTC_CAL_8MD256, 100);
|
|
uint32_t rtc_fast_freq_hz = 1000000ULL * (1 << RTC_CLK_CAL_FRACT) * 256 / rtc_8md256_period;
|
|
|
|
ULP coprocessor needs certain number of clock cycles to fetch each instruction, plus certain number of cycles to execute it, depending on the instruction. See description of each instruction below for details on the execution time.
|
|
|
|
Instruction fetch time is:
|
|
|
|
- 2 clock cycles — for instructions following ALU and branch instructions.
|
|
- 4 clock cycles — in other cases.
|
|
|
|
Note that when accessing RTC memories and RTC registers, ULP coprocessor has lower priority than the main CPUs. This means that ULP coprocessor execution may be suspended while the main CPUs access same memory region as the ULP.
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
Difference between ESP32 ULP and {IDF_TARGET_NAME} ULP Instruction sets
|
|
-----------------------------------------------------------------------
|
|
|
|
Compared to the ESP32 ULP FSM coprocessor, the {IDF_TARGET_NAME} ULP FSM coprocessor has an extended instruction set. The {IDF_TARGET_NAME} ULP FSM is not binary compatible with ESP32 ULP FSM,
|
|
but a ESP32 ULP FSM assembled program is expected to work on the {IDF_TARGET_NAME} ULP FSM after rebuilding.
|
|
The list of the new instructions that was added to the {IDF_TARGET_NAME} ULP FSM is: ``LDL``, ``LDH``, ``STL``, ``STH``, ``ST32``, ``STO``, ``STI``, ``STI32``.
|
|
|
|
|
|
The detailed description of all instructions is presented below:
|
|
|
|
**NOP** - no operation
|
|
----------------------
|
|
|
|
**Syntax**
|
|
**NOP**
|
|
**Operands**
|
|
None
|
|
**Cycles**
|
|
2 cycle to execute, 4 cycles to fetch next instruction
|
|
**Description**
|
|
No operation is performed. Only the PC is incremented.
|
|
|
|
**Example**::
|
|
|
|
1: NOP
|
|
|
|
|
|
**ADD** - Add to register
|
|
-------------------------
|
|
|
|
**Syntax**
|
|
**ADD** *Rdst, Rsrc1, Rsrc2*
|
|
|
|
**ADD** *Rdst, Rsrc1, imm*
|
|
|
|
|
|
**Operands**
|
|
- *Rdst* - Register R[0..3]
|
|
- *Rsrc1* - Register R[0..3]
|
|
- *Rsrc2* - Register R[0..3]
|
|
- *Imm* - 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction adds source register to another source register or to a 16-bit signed value and stores the result in the destination register.
|
|
|
|
**Examples**::
|
|
|
|
1: ADD R1, R2, R3 // R1 = R2 + R3
|
|
|
|
2: Add R1, R2, 0x1234 // R1 = R2 + 0x1234
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
Add R1, R2, value1 // R1 = R2 + value1
|
|
|
|
4: .global label // declaration of variable label
|
|
add R1, R2, label // R1 = R2 + label
|
|
...
|
|
label: nop // definition of variable label
|
|
|
|
|
|
**SUB** - Subtract from register
|
|
--------------------------------
|
|
|
|
**Syntax**
|
|
**SUB** *Rdst, Rsrc1, Rsrc2*
|
|
|
|
**SUB** *Rdst, Rsrc1, imm*
|
|
|
|
**Operands**
|
|
- *Rdst* - Register R[0..3]
|
|
- *Rsrc1* - Register R[0..3]
|
|
- *Rsrc2* - Register R[0..3]
|
|
- *Imm* - 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction subtracts the source register from another source register or subtracts a 16-bit signed value from a source register, and stores the result to the destination register.
|
|
|
|
**Examples**::
|
|
|
|
1: SUB R1, R2, R3 // R1 = R2 - R3
|
|
|
|
2: sub R1, R2, 0x1234 // R1 = R2 - 0x1234
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
SUB R1, R2, value1 // R1 = R2 - value1
|
|
4: .global label // declaration of variable label
|
|
SUB R1, R2, label // R1 = R2 - label
|
|
....
|
|
label: nop // definition of variable label
|
|
|
|
|
|
**AND** - Bitwise logical AND of two operands
|
|
---------------------------------------------
|
|
|
|
**Syntax**
|
|
**AND** *Rdst, Rsrc1, Rsrc2*
|
|
|
|
**AND** *Rdst, Rsrc1, imm*
|
|
|
|
**Operands**
|
|
- *Rdst* - Register R[0..3]
|
|
- *Rsrc1* - Register R[0..3]
|
|
- *Rsrc2* - Register R[0..3]
|
|
- *Imm* - 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction does a bitwise logical AND of a source register and another source register or a 16-bit signed value and stores the result to the destination register.
|
|
|
|
**Examples**::
|
|
|
|
1: AND R1, R2, R3 // R1 = R2 & R3
|
|
|
|
2: AND R1, R2, 0x1234 // R1 = R2 & 0x1234
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
AND R1, R2, value1 // R1 = R2 & value1
|
|
|
|
4: .global label // declaration of variable label
|
|
AND R1, R2, label // R1 = R2 & label
|
|
...
|
|
label: nop // definition of variable label
|
|
|
|
|
|
**OR** - Bitwise logical OR of two operands
|
|
-------------------------------------------
|
|
|
|
**Syntax**
|
|
**OR** *Rdst, Rsrc1, Rsrc2*
|
|
|
|
**OR** *Rdst, Rsrc1, imm*
|
|
|
|
**Operands**
|
|
- *Rdst* - Register R[0..3]
|
|
- *Rsrc1* - Register R[0..3]
|
|
- *Rsrc2* - Register R[0..3]
|
|
- *Imm* - 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction does a bitwise logical OR of a source register and another source register or a 16-bit signed value and stores the result to the destination register.
|
|
|
|
**Examples**::
|
|
|
|
1: OR R1, R2, R3 // R1 = R2 || R3
|
|
|
|
2: OR R1, R2, 0x1234 // R1 = R2 || 0x1234
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
OR R1, R2, value1 // R1 = R2 || value1
|
|
|
|
4: .global label // declaration of variable label
|
|
OR R1, R2, label // R1 = R2 || label
|
|
...
|
|
label: nop // definition of variable label
|
|
|
|
|
|
**LSH** - Logical Shift Left
|
|
----------------------------
|
|
|
|
**Syntax**
|
|
**LSH** *Rdst, Rsrc1, Rsrc2*
|
|
|
|
**LSH** *Rdst, Rsrc1, imm*
|
|
|
|
**Operands**
|
|
- *Rdst* - Register R[0..3]
|
|
- *Rsrc1* - Register R[0..3]
|
|
- *Rsrc2* - Register R[0..3]
|
|
- *Imm* - 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction does a logical shift to left of the source register by the number of bits from another source register or a 16-bit signed value and stores the result to the destination register.
|
|
|
|
.. note::
|
|
Shift operations which are greater than 15 bits will have an undefined result.
|
|
|
|
**Examples**::
|
|
|
|
1: LSH R1, R2, R3 // R1 = R2 << R3
|
|
|
|
2: LSH R1, R2, 0x03 // R1 = R2 << 0x03
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
LSH R1, R2, value1 // R1 = R2 << value1
|
|
|
|
4: .global label // declaration of variable label
|
|
LSH R1, R2, label // R1 = R2 << label
|
|
...
|
|
label: nop // definition of variable label
|
|
|
|
|
|
**RSH** - Logical Shift Right
|
|
-----------------------------
|
|
|
|
**Syntax**
|
|
**RSH** *Rdst, Rsrc1, Rsrc2*
|
|
|
|
**RSH** *Rdst, Rsrc1, imm*
|
|
|
|
**Operands**
|
|
*Rdst* - Register R[0..3]
|
|
*Rsrc1* - Register R[0..3]
|
|
*Rsrc2* - Register R[0..3]
|
|
*Imm* - 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction does a logical shift to right of a source register by the number of bits from another source register or a 16-bit signed value and stores the result to the destination register.
|
|
|
|
.. note::
|
|
Shift operations which are greater than 15 bits will have an undefined result.
|
|
|
|
**Examples**::
|
|
|
|
1: RSH R1, R2, R3 // R1 = R2 >> R3
|
|
|
|
2: RSH R1, R2, 0x03 // R1 = R2 >> 0x03
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
RSH R1, R2, value1 // R1 = R2 >> value1
|
|
|
|
4: .global label // declaration of variable label
|
|
RSH R1, R2, label // R1 = R2 >> label
|
|
label: nop // definition of variable label
|
|
|
|
|
|
**MOVE** – Move to register
|
|
---------------------------
|
|
|
|
**Syntax**
|
|
**MOVE** *Rdst, Rsrc*
|
|
|
|
**MOVE** *Rdst, imm*
|
|
|
|
**Operands**
|
|
- *Rdst* – Register R[0..3]
|
|
- *Rsrc* – Register R[0..3]
|
|
- *Imm* – 16-bit signed value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction moves the value from the source register or a 16-bit signed value to the destination register.
|
|
|
|
.. note::
|
|
Note that when a label is used as an immediate, the address of the label will be converted from bytes to words. This is because LD, ST, and JUMP instructions expect the address register value to be expressed in words rather than bytes. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
|
|
**Examples**::
|
|
|
|
1: MOVE R1, R2 // R1 = R2
|
|
|
|
2: MOVE R1, 0x03 // R1 = 0x03
|
|
|
|
3: .set value1, 0x03 // constant value1=0x03
|
|
MOVE R1, value1 // R1 = value1
|
|
|
|
4: .global label // declaration of label
|
|
MOVE R1, label // R1 = address_of(label) / 4
|
|
...
|
|
label: nop // definition of label
|
|
|
|
|
|
**ST** – Store data to the memory
|
|
---------------------------------
|
|
|
|
**Syntax**
|
|
**ST** *Rsrc, Rdst, offset*
|
|
|
|
**Operands**
|
|
- *Rsrc* – Register R[0..3], holds the 16-bit value to store
|
|
- *Rdst* – Register R[0..3], address of the destination, in 32-bit words
|
|
- *Offset* – 13-bit signed value, offset in bytes
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction stores the 16-bit value of Rsrc to the lower half-word of memory with address Rdst+offset. The upper half-word is written with the current program counter (PC) (expressed in words, shifted left by 5 bits) OR'd with Rdst (0..3)::
|
|
|
|
Mem[Rdst + offset / 4]{31:0} = {PC[10:0], 3'b0, Rdst, Rsrc[15:0]}
|
|
|
|
The application can use the higher 16 bits to determine which instruction in the ULP program has written any particular word into memory.
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: ST R1, R2, 0x12 // MEM[R2 + 0x12 / 4] = R1
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1
|
|
ST R1, R2, offs // MEM[R2 + 0 / 4] = R1
|
|
// MEM[Addr1 + 0] will be 32'h600001
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
**STL** – Store data to the lower 16 bits of 32-bit memory
|
|
----------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**STL** *Rsrc, Rdst, offset, Label*
|
|
|
|
**Operands**
|
|
- *Rsrc* – Register R[0..3], holds the 16-bit value to store
|
|
- *Rdst* – Register R[0..3], address of the destination, in 32-bit words
|
|
- *Offset* – 11-bit signed value, offset in bytes
|
|
- *Label* – 2-bit user defined unsigned value
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction stores the 16-bit value of Rsrc to the lower half-word of the memory with address [Rdst + offset / 4]::
|
|
|
|
Mem[Rdst + offset / 4]{15:0} = {Rsrc[15:0]}
|
|
Mem[Rdst + offset / 4]{15:0} = {Label[1:0],Rsrc[13:0]}
|
|
|
|
The ``ST`` and the ``STL`` commands can be used interchangeably and have been provided to maintain backward compatibility with previous versions of the ULP core.
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: STL R1, R2, 0x12 // MEM[R2 + 0x12 / 4] = R1
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1
|
|
STL R1, R2, offs // MEM[R2 + 0 / 4] = R1
|
|
// MEM[Addr1 + 0] will be 32'hxxxx0001
|
|
3:
|
|
MOVE R1, 1 // R1 = 1
|
|
STL R1, R2, 0x12, 1 // MEM[R2 + 0x12 / 4] = 0xxxxx4001
|
|
|
|
|
|
**STH** – Store data to the higher 16 bits of 32-bit memory
|
|
------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**STH** *Rsrc, Rdst, offset, Label*
|
|
|
|
**Operands**
|
|
- *Rsrc* – Register R[0..3], holds the 16-bit value to store
|
|
- *Rdst* – Register R[0..3], address of the destination, in 32-bit words
|
|
- *Offset* – 11-bit signed value, offset in bytes
|
|
- *Label* – 2-bit user defined unsigned value
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction stores the 16-bit value of Rsrc to the upper half-word of memory with address [Rdst + offset / 4]::
|
|
|
|
Mem[Rdst + offset / 4]{31:16} = {Rsrc[15:0]}
|
|
Mem[Rdst + offset / 4]{31:16} = {Label[1:0],Rsrc[13:0]}
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: STH R1, R2, 0x12 // MEM[R2 + 0x12 / 4][31:16] = R1
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1
|
|
STH R1, R2, offs // MEM[R2 + 0 / 4] = R1
|
|
// MEM[Addr1 + 0] will be 32'h0001xxxx
|
|
3:
|
|
MOVE R1, 1 // R1 = 1
|
|
STH R1, R2, 0x12, 1 // MEM[R2 + 0x12 / 4] 0x4001xxxx
|
|
|
|
|
|
**ST32** – Store 32-bits data to the 32-bits memory
|
|
---------------------------------------------------
|
|
|
|
**Syntax**
|
|
**ST32** *Rsrc, Rdst, offset, Label*
|
|
|
|
**Operands**
|
|
- *Rsrc* – Register R[0..3], holds the 16-bit value to store
|
|
- *Rdst* – Register R[0..3], address of the destination, in 32-bit words
|
|
- *Offset* – 11-bit signed value, offset in bytes
|
|
- *Label* – 2-bit user defined unsigned value
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction stores 11 bits of the PC value, label value and the 16-bit value of Rsrc to the 32-bit memory with address [Rdst + offset / 4]::
|
|
|
|
Mem[Rdst + offset / 4]{31:0} = {PC[10:0],0[2:0],Label[1:0],Rsrc[15:0]}
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: ST32 R1, R2, 0x12, 0 // MEM[R2 + 0x12 / 4][31:0] = {PC[10:0],0[2:0],Label[1:0],Rsrc[15:0]}
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1
|
|
ST32 R1, R2, offs, 1 // MEM[R2 + 0] = {PC[10:0],0[2:0],Label[1:0],Rsrc[15:0]}
|
|
// MEM[Addr1 + 0] will be 32'h00010001
|
|
|
|
|
|
**STO** – Set offset value for auto increment operation
|
|
-------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**STO** *offset*
|
|
|
|
**Operands**
|
|
- *Offset* – 11-bit signed value, offset in bytes
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction sets the 16-bit value to the offset register::
|
|
|
|
offset = value / 4
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: STO 0x12 // Offset = 0x12 / 4
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
STO offs // Offset = 0x00
|
|
|
|
|
|
**STI** – Store data to the 32-bits memory with auto increment of predefined offset address
|
|
-------------------------------------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**STI** *Rsrc, Rdst, Label*
|
|
|
|
**Operands**
|
|
- *Rsrc* – Register R[0..3], holds the 16-bit value to store
|
|
- *Rdst* – Register R[0..3], address of the destination, in 32-bit words
|
|
- *Label* – 2-bit user defined unsigned value
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction stores the 16-bit value of Rsrc to the lower and upper half-word of memory with address [Rdst + offset / 4].
|
|
The offset value is auto incremented when the STI instruction is called twice. Make sure to execute the ``STO`` instruction
|
|
to set the offset value before executing the STI instruction::
|
|
|
|
Mem[Rdst + offset / 4]{15:0/31:16} = {Rsrc[15:0]}
|
|
Mem[Rdst + offset / 4]{15:0/31:16} = {Label[1:0],Rsrc[13:0]}
|
|
|
|
**Examples**::
|
|
|
|
1: STO 4 // Set offset to 4
|
|
STI R1, R2 // MEM[R2 + 4 / 4][15:0] = R1
|
|
STI R1, R2 // MEM[R2 + 4 / 4][31:16] = R1
|
|
// offset += (1 * 4) //offset is incremented by 1 word
|
|
STI R1, R2 // MEM[R2 + 8 / 4][15:0] = R1
|
|
STI R1, R2 // MEM[R2 + 8 / 4][31:16] = R1
|
|
|
|
|
|
**STI32** – Store 32-bits data to the 32-bits memory with auto increment of adress offset
|
|
-----------------------------------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**STI32** *Rsrc, Rdst, Label*
|
|
|
|
**Operands**
|
|
- *Rsrc* – Register R[0..3], holds the 16-bit value to store
|
|
- *Rdst* – Register R[0..3], address of the destination, in 32-bit words
|
|
- *Label* – 2-bit user defined unsigned value
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction stores 11 bits of the PC value, label value and the 16-bit value of Rsrc to the 32-bit memory with address [Rdst + offset / 4].
|
|
The offset value is auto incremented each time the STI32 instruction is called. Make sure to execute the ``STO`` instruction
|
|
to set the offset value before executing the STI32 instruction::
|
|
|
|
Mem[Rdst + offset / 4]{31:0} = {PC[10:0],0[2:0],Label[1:0],Rsrc[15:0]}
|
|
|
|
**Examples**::
|
|
|
|
1: STO 0x12
|
|
STI32 R1, R2, 0 // MEM[R2 + 0x12 / 4][31:0] = {PC[10:0],0[2:0],Label[1:0],Rsrc[15:0]}
|
|
// offset += (1 * 4) //offset is incremented by 1 word
|
|
STI32 R1, R2, 0 // MEM[R2 + 0x16 / 4][31:0] = {PC[10:0],0[2:0],Label[1:0],Rsrc[15:0]}
|
|
|
|
|
|
**LD** – Load data from the memory
|
|
----------------------------------
|
|
|
|
**Syntax**
|
|
**LD** *Rdst, Rsrc, offset*
|
|
|
|
**Operands**
|
|
- *Rdst* – Register R[0..3], destination
|
|
- *Rsrc* – Register R[0..3], holds address of destination, in 32-bit words
|
|
- *Offset* – 13-bit signed value, offset in bytes
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction loads the lower 16-bit half-word from memory with address [Rsrc + offset / 4] into the destination register Rdst::
|
|
|
|
Rdst[15:0] = Mem[Rsrc + offset / 4][15:0]
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: LD R1, R2, 0x12 // R1 = MEM[R2 + 0x12 / 4]
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1 / 4 (address of label is converted into words)
|
|
LD R1, R2, offs // R1 = MEM[R2 + 0]
|
|
// R1 will be 123
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
**LDL** – Load data from the lower half-word of the 32-bit memory
|
|
------------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**LDL** *Rdst, Rsrc, offset*
|
|
|
|
**Operands**
|
|
- *Rdst* – Register R[0..3], destination
|
|
- *Rsrc* – Register R[0..3], holds address of destination, in 32-bit words
|
|
- *Offset* – 13-bit signed value, offset in bytes
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction loads the lower 16-bit half-word from memory with address [Rsrc + offset / 4] into the destination register Rdst::
|
|
|
|
Rdst[15:0] = Mem[Rsrc + offset / 4][15:0]
|
|
|
|
The ``LD`` and the ``LDL`` commands can be used interchangeably and have been provided to maintain backward compatibility with previous versions of the ULP core.
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: LDL R1, R2, 0x12 // R1 = MEM[R2 + 0x12 / 4]
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 123 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1 / 4 (address of label is converted into words)
|
|
LDL R1, R2, offs // R1 = MEM[R2 + 0]
|
|
// R1 will be 123
|
|
|
|
|
|
**LDH** – Load data from upper half-word of the 32-bit memory
|
|
--------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**LDH** *Rdst, Rsrc, offset*
|
|
|
|
**Operands**
|
|
- *Rdst* – Register R[0..3], destination
|
|
- *Rsrc* – Register R[0..3], holds address of destination, in 32-bit words
|
|
- *Offset* – 13-bit signed value, offset in bytes
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction loads the upper 16-bit half-word from memory with address [Rsrc + offset / 4] into the destination register Rdst::
|
|
|
|
Rdst[15:0] = Mem[Rsrc + offset / 4][15:0]
|
|
|
|
.. note::
|
|
Note that the offset specified in bytes is converted to a 32-bit word offset before execution. See the section :ref:`ulp-fsm-addressing` for more details.
|
|
|
|
**Examples**::
|
|
|
|
1: LDH R1, R2, 0x12 // R1 = MEM[R2 + 0x12 / 4]
|
|
|
|
2: .data // Data section definition
|
|
Addr1: .word 0x12345678 // Define label Addr1 16 bit
|
|
.set offs, 0x00 // Define constant offs
|
|
.text // Text section definition
|
|
MOVE R1, 1 // R1 = 1
|
|
MOVE R2, Addr1 // R2 = Addr1 / 4 (address of label is converted into words)
|
|
LDH R1, R2, offs // R1 = MEM[R2 + 0]
|
|
// R1 will be 0x1234
|
|
|
|
|
|
**JUMP** – Jump to an absolute address
|
|
--------------------------------------
|
|
|
|
**Syntax**
|
|
**JUMP** *Rdst*
|
|
|
|
**JUMP** *ImmAddr*
|
|
|
|
**JUMP** *Rdst, Condition*
|
|
|
|
**JUMP** *ImmAddr, Condition*
|
|
|
|
|
|
**Operands**
|
|
- *Rdst* – Register R[0..3] containing address to jump to (expressed in 32-bit words)
|
|
- *ImmAddr* – 13 bits address (expressed in bytes), aligned to 4 bytes
|
|
- *Condition*:
|
|
- EQ – jump if last ALU operation result was zero
|
|
- OV – jump if last ALU has set overflow flag
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 2 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction makes jump to the specified address. Jump can be either unconditional or based on an ALU flag.
|
|
|
|
**Examples**::
|
|
|
|
1: JUMP R1 // Jump to address in R1 (address in R1 is in 32-bit words)
|
|
|
|
2: JUMP 0x120, EQ // Jump to address 0x120 (in bytes) if ALU result is zero
|
|
|
|
3: JUMP label // Jump to label
|
|
...
|
|
label: nop // Definition of label
|
|
|
|
4: .global label // Declaration of global label
|
|
|
|
MOVE R1, label // R1 = label (value loaded into R1 is in words)
|
|
JUMP R1 // Jump to label
|
|
...
|
|
label: nop // Definition of label
|
|
|
|
|
|
**JUMPR** – Jump to a relative offset (condition based on R0)
|
|
-------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**JUMPR** *Step, Threshold, Condition*
|
|
|
|
**Operands**
|
|
- *Step* – relative shift from current position, in bytes
|
|
- *Threshold* – threshold value for branch condition
|
|
- *Condition*:
|
|
- *EQ* (equal) – jump if value in R0 == threshold
|
|
- *LT* (less than) – jump if value in R0 < threshold
|
|
- *LE* (less or equal) – jump if value in R0 <= threshold
|
|
- *GT* (greater than) – jump if value in R0 > threshold
|
|
- *GE* (greater or equal) – jump if value in R0 >= threshold
|
|
|
|
**Cycles**
|
|
Conditions *EQ*, *GT* and *LT*: 2 cycles to execute, 2 cycles to fetch next instruction
|
|
Conditions *LE* and *GE* are implemented in the assembler using two **JUMPR** instructions::
|
|
|
|
// JUMPR target, threshold, LE is implemented as:
|
|
|
|
JUMPR target, threshold, EQ
|
|
JUMPR target, threshold, LT
|
|
|
|
// JUMPR target, threshold, GE is implemented as:
|
|
|
|
JUMPR target, threshold, EQ
|
|
JUMPR target, threshold, GT
|
|
|
|
Therefore the execution time will depend on the branches taken: either 2 cycles to execute + 2 cycles to fetch, or 4 cycles to execute + 4 cycles to fetch.
|
|
|
|
**Description**
|
|
The instruction makes a jump to a relative address if condition is true. Condition is the result of comparison of R0 register value and the threshold value.
|
|
|
|
**Examples**::
|
|
|
|
1:pos: JUMPR 16, 20, GE // Jump to address (position + 16 bytes) if value in R0 >= 20
|
|
|
|
2: // Down counting loop using R0 register
|
|
MOVE R0, 16 // load 16 into R0
|
|
label: SUB R0, R0, 1 // R0--
|
|
NOP // do something
|
|
JUMPR label, 1, GE // jump to label if R0 >= 1
|
|
|
|
|
|
**JUMPS** – Jump to a relative address (condition based on stage count)
|
|
-----------------------------------------------------------------------
|
|
|
|
**Syntax**
|
|
**JUMPS** *Step, Threshold, Condition*
|
|
|
|
**Operands**
|
|
- *Step* – relative shift from current position, in bytes
|
|
- *Threshold* – threshold value for branch condition
|
|
- *Condition*:
|
|
- *EQ* (equal) – jump if value in stage_cnt == threshold
|
|
- *LT* (less than) – jump if value in stage_cnt < threshold
|
|
- *LE* (less or equal) - jump if value in stage_cnt <= threshold
|
|
- *GT* (greater than) – jump if value in stage_cnt > threshold
|
|
- *GE* (greater or equal) — jump if value in stage_cnt >= threshold
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 2 cycles to fetch next instruction::
|
|
|
|
// JUMPS target, threshold, EQ is implemented as:
|
|
|
|
JUMPS next, threshold, LT
|
|
JUMPS target, threshold, LE
|
|
next:
|
|
|
|
// JUMPS target, threshold, GT is implemented as:
|
|
|
|
JUMPS next, threshold, LE
|
|
JUMPS target, threshold, GE
|
|
next:
|
|
|
|
Therefore the execution time will depend on the branches taken: either 2 cycles to execute + 2 cycles to fetch, or 4 cycles to execute + 4 cycles to fetch.
|
|
|
|
**Description**
|
|
The instruction makes a jump to a relative address if condition is true. Condition is the result of comparison of count register value and threshold value.
|
|
|
|
**Examples**::
|
|
|
|
1:pos: JUMPS 16, 20, EQ // Jump to (position + 16 bytes) if stage_cnt == 20
|
|
|
|
2: // Up counting loop using stage count register
|
|
STAGE_RST // set stage_cnt to 0
|
|
label: STAGE_INC 1 // stage_cnt++
|
|
NOP // do something
|
|
JUMPS label, 16, LT // jump to label if stage_cnt < 16
|
|
|
|
|
|
**STAGE_RST** – Reset stage count register
|
|
------------------------------------------
|
|
**Syntax**
|
|
**STAGE_RST**
|
|
|
|
**Operands**
|
|
No operands
|
|
|
|
**Description**
|
|
The instruction sets the stage count register to 0
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Examples**::
|
|
|
|
1: STAGE_RST // Reset stage count register
|
|
|
|
|
|
**STAGE_INC** – Increment stage count register
|
|
----------------------------------------------
|
|
|
|
**Syntax**
|
|
**STAGE_INC** *Value*
|
|
|
|
**Operands**
|
|
- *Value* – 8 bits value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction increments the stage count register by the given value.
|
|
|
|
**Examples**::
|
|
|
|
1: STAGE_INC 10 // stage_cnt += 10
|
|
|
|
2: // Up counting loop example:
|
|
STAGE_RST // set stage_cnt to 0
|
|
label: STAGE_INC 1 // stage_cnt++
|
|
NOP // do something
|
|
JUMPS label, 16, LT // jump to label if stage_cnt < 16
|
|
|
|
|
|
**STAGE_DEC** – Decrement stage count register
|
|
----------------------------------------------
|
|
|
|
**Syntax**
|
|
**STAGE_DEC** *Value*
|
|
|
|
**Operands**
|
|
- *Value* – 8 bits value
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction decrements the stage count register by the given value.
|
|
|
|
**Examples**::
|
|
|
|
1: STAGE_DEC 10 // stage_cnt -= 10;
|
|
|
|
2: // Down counting loop example
|
|
STAGE_RST // set stage_cnt to 0
|
|
STAGE_INC 16 // increment stage_cnt to 16
|
|
label: STAGE_DEC 1 // stage_cnt--;
|
|
NOP // do something
|
|
JUMPS label, 0, GT // jump to label if stage_cnt > 0
|
|
|
|
|
|
**HALT** – End the program
|
|
--------------------------
|
|
|
|
**Syntax**
|
|
**HALT**
|
|
|
|
**Operands**
|
|
No operands
|
|
|
|
**Cycles**
|
|
2 cycles to execute
|
|
|
|
**Description**
|
|
The instruction halts the ULP coprocessor and restarts the ULP wakeup timer, if it is enabled.
|
|
|
|
**Examples**::
|
|
|
|
1: HALT // Halt the coprocessor
|
|
|
|
|
|
**WAKE** – Wake up the chip
|
|
---------------------------
|
|
|
|
**Syntax**
|
|
**WAKE**
|
|
|
|
**Operands**
|
|
No operands
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction sends an interrupt from the ULP coprocessor to the RTC controller.
|
|
|
|
- If the SoC is in deep sleep mode, and ULP wakeup is enabled, this causes the SoC to wake up.
|
|
|
|
- If the SoC is not in deep sleep mode, and ULP interrupt bit (RTC_CNTL_ULP_CP_INT_ENA) is set in RTC_CNTL_INT_ENA_REG register, RTC interrupt will be triggered.
|
|
|
|
.. note::
|
|
Note that before using WAKE instruction, ULP program may need to wait until RTC controller is ready to wake up the main CPU. This is indicated using RTC_CNTL_RDY_FOR_WAKEUP bit of RTC_CNTL_LOW_POWER_ST_REG register. If WAKE instruction is executed while RTC_CNTL_RDY_FOR_WAKEUP is zero, it has no effect (wake up does not occur). If the WAKE instruction is intended to be used while the main CPU is not in sleep mode then the RTC_CNTL_MAIN_STATE_IN_IDLE (bit 27) of RTC_CNTL_LOW_POWER_ST_REG can be used to check whether main CPU is in normal mode or sleep mode.
|
|
|
|
**Examples**::
|
|
|
|
1: is_rdy_for_wakeup: // Read RTC_CNTL_RDY_FOR_WAKEUP bit
|
|
READ_RTC_FIELD(RTC_CNTL_LOW_POWER_ST_REG, RTC_CNTL_RDY_FOR_WAKEUP)
|
|
AND r0, r0, 1
|
|
JUMP is_rdy_for_wakeup, eq // Retry until the bit is set
|
|
WAKE // Trigger wake up
|
|
REG_WR 0x006, 24, 24, 0 // Stop ULP timer (clear RTC_CNTL_ULP_CP_SLP_TIMER_EN)
|
|
HALT // Stop the ULP program
|
|
// After these instructions, SoC will wake up,
|
|
// and ULP will not run again until started by the main program.
|
|
|
|
1: check_wakeup: // Read RTC_CNTL_RDY_FOR_WAKEUP and RTC_CNTL_MAIN_STATE_IN_IDLE bit
|
|
READ_RTC_REG(RTC_CNTL_LOW_POWER_ST_REG, 27, 0)
|
|
MOVE r1, r0 // Copy result in to r1
|
|
READ_RTC_FIELD(RTC_CNTL_LOW_POWER_ST_REG, RTC_CNTL_RDY_FOR_WAKEUP)
|
|
OR r0, r0, r1
|
|
JUMP check_wakeup, eq // Retry until either of the bit are set
|
|
WAKE // Trigger wake up
|
|
HALT // Stop the ULP program
|
|
|
|
|
|
.. only:: esp32
|
|
|
|
**SLEEP** – set ULP wakeup timer period
|
|
---------------------------------------
|
|
|
|
**Syntax**
|
|
**SLEEP** *sleep_reg*
|
|
|
|
**Operands**
|
|
- *sleep_reg* – 0..4, selects one of ``SENS_ULP_CP_SLEEP_CYCx_REG`` registers.
|
|
|
|
**Cycles**
|
|
2 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction selects which of the ``SENS_ULP_CP_SLEEP_CYCx_REG`` (x = 0..4) register values is to be used by the ULP wakeup timer as wakeup period. By default, the value from ``SENS_ULP_CP_SLEEP_CYC0_REG`` is used.
|
|
|
|
**Examples**::
|
|
|
|
1: SLEEP 1 // Use period set in SENS_ULP_CP_SLEEP_CYC1_REG
|
|
|
|
2: .set sleep_reg, 4 // Set constant
|
|
SLEEP sleep_reg // Use period set in SENS_ULP_CP_SLEEP_CYC4_REG
|
|
|
|
|
|
**WAIT** – wait some number of cycles
|
|
-------------------------------------
|
|
|
|
**Syntax**
|
|
**WAIT** *Cycles*
|
|
|
|
**Operands**
|
|
- *Cycles* – number of cycles for wait
|
|
|
|
**Cycles**
|
|
2 + *Cycles* cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction delays for given number of cycles.
|
|
|
|
**Examples**::
|
|
|
|
1: WAIT 10 // Do nothing for 10 cycles
|
|
|
|
2: .set wait_cnt, 10 // Set a constant
|
|
WAIT wait_cnt // wait for 10 cycles
|
|
|
|
.. only:: not esp32
|
|
|
|
**TSENS** – do measurement with temperature sensor
|
|
--------------------------------------------------
|
|
|
|
**Syntax**
|
|
- **TSENS** *Rdst, Wait_Delay*
|
|
|
|
**Operands**
|
|
- *Rdst* – Destination Register R[0..3], result will be stored to this register
|
|
- *Wait_Delay* – number of cycles used to perform the measurement
|
|
|
|
**Cycles**
|
|
2 + *Wait_Delay* + 3 * TSENS_CLK to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction performs measurement using TSENS and stores the result into a general purpose register.
|
|
|
|
**Examples**::
|
|
|
|
1: TSENS R1, 1000 // Measure temperature sensor for 1000 cycles,
|
|
// and store result to R1
|
|
|
|
|
|
**ADC** – do measurement with ADC
|
|
---------------------------------
|
|
|
|
**Syntax**
|
|
- **ADC** *Rdst, Sar_sel, Mux*
|
|
|
|
- **ADC** *Rdst, Sar_sel, Mux, 0* — deprecated form
|
|
|
|
**Operands**
|
|
- *Rdst* – Destination Register R[0..3], result will be stored to this register
|
|
- *Sar_sel* – Select ADC: 0 = SARADC1, 1 = SARADC2
|
|
|
|
.. only:: esp32
|
|
|
|
- *Mux* - Enable ADC channel. Channel number is [Mux-1]. If the user passes Mux value 1, then ADC channel 0 gets used.
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
- *Mux* - selected PAD, SARADC Pad[Mux-1] is enabled. If the user passes Mux value 1, then ADC pad 0 gets used.
|
|
|
|
**Cycles**
|
|
``23 + max(1, SAR_AMP_WAIT1) + max(1, SAR_AMP_WAIT2) + max(1, SAR_AMP_WAIT3) + SARx_SAMPLE_CYCLE + SARx_SAMPLE_BIT`` cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction makes measurements from ADC.
|
|
|
|
**Examples**::
|
|
|
|
.. only:: esp32
|
|
|
|
1: ADC R1, 0, 1 // Measure value using ADC1 channel 0 and store result into R1
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
1: ADC R1, 0, 1 // Measure value using ADC1 pad 2 and store result into R1
|
|
|
|
.. only:: esp32
|
|
|
|
**I2C_RD** - read single byte from I2C slave
|
|
----------------------------------------------
|
|
|
|
**Syntax**
|
|
- **I2C_RD** *Sub_addr, High, Low, Slave_sel*
|
|
|
|
**Operands**
|
|
- *Sub_addr* – Address within the I2C slave to read.
|
|
- *High*, *Low* — Define range of bits to read. Bits outside of [High, Low] range are masked.
|
|
- *Slave_sel* - Index of I2C slave address to use.
|
|
|
|
**Cycles**
|
|
Execution time mostly depends on I2C communication time. 4 cycles to fetch next instruction.
|
|
|
|
**Description**
|
|
``I2C_RD`` instruction reads one byte from I2C slave with index ``Slave_sel``. Slave address (in 7-bit format) has to be set in advance into `SENS_I2C_SLAVE_ADDRx` register field, where ``x == Slave_sel``.
|
|
8 bits of read result is stored into `R0` register.
|
|
|
|
**Examples**::
|
|
|
|
1: I2C_RD 0x10, 7, 0, 0 // Read byte from sub-address 0x10 of slave with address set in SENS_I2C_SLAVE_ADDR0
|
|
|
|
|
|
**I2C_WR** - write single byte to I2C slave
|
|
----------------------------------------------
|
|
|
|
**Syntax**
|
|
- **I2C_WR** *Sub_addr, Value, High, Low, Slave_sel*
|
|
|
|
**Operands**
|
|
- *Sub_addr* – Address within the I2C slave to write.
|
|
- *Value* – 8-bit value to be written.
|
|
- *High*, *Low* — Define range of bits to write. Bits outside of [High, Low] range are masked.
|
|
- *Slave_sel* - Index of I2C slave address to use.
|
|
|
|
**Cycles**
|
|
Execution time mostly depends on I2C communication time. 4 cycles to fetch next instruction.
|
|
|
|
**Description**
|
|
``I2C_WR`` instruction writes one byte to I2C slave with index ``Slave_sel``. Slave address (in 7-bit format) has to be set in advance into `SENS_I2C_SLAVE_ADDRx` register field, where ``x == Slave_sel``.
|
|
|
|
**Examples**::
|
|
|
|
1: I2C_WR 0x20, 0x33, 7, 0, 1 // Write byte 0x33 to sub-address 0x20 of slave with address set in SENS_I2C_SLAVE_ADDR1.
|
|
|
|
|
|
**REG_RD** – read from peripheral register
|
|
------------------------------------------
|
|
|
|
**Syntax**
|
|
**REG_RD** *Addr, High, Low*
|
|
|
|
**Operands**
|
|
- *Addr* – Register address, in 32-bit words
|
|
- *High* – Register end bit number
|
|
- *Low* – Register start bit number
|
|
|
|
**Cycles**
|
|
4 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction reads up to 16 bits from a peripheral register into a general purpose register: ``R0 = REG[Addr][High:Low]``.
|
|
|
|
.. only:: esp32
|
|
|
|
This instruction can access registers in RTC_CNTL, RTC_IO, SENS, and RTC_I2C peripherals. Address of the register, as seen from the ULP, can be calculated from the address of the same register on the DPORT bus as follows::
|
|
|
|
addr_ulp = (addr_dport - DR_REG_RTCCNTL_BASE) / 4
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
This instruction can access registers in RTC_CNTL, RTC_IO, SENS, and RTC_I2C peripherals. Address of the register, as seen from the ULP, can be calculated from the address of the same register on the PeriBUS1 as follows::
|
|
|
|
addr_ulp = (addr_peribus1 - DR_REG_RTCCNTL_BASE) / 4
|
|
|
|
**Examples**::
|
|
|
|
1: REG_RD 0x120, 7, 4 // load 4 bits: R0 = {12'b0, REG[0x120][7:4]}
|
|
|
|
|
|
**REG_WR** – write to peripheral register
|
|
-----------------------------------------
|
|
|
|
**Syntax**
|
|
**REG_WR** *Addr, High, Low, Data*
|
|
|
|
**Operands**
|
|
- *Addr* – Register address, in 32-bit words.
|
|
- *High* – Register end bit number
|
|
- *Low* – Register start bit number
|
|
- *Data* – Value to write, 8 bits
|
|
|
|
**Cycles**
|
|
8 cycles to execute, 4 cycles to fetch next instruction
|
|
|
|
**Description**
|
|
The instruction writes up to 8 bits from an immediate data value into a peripheral register: ``REG[Addr][High:Low] = data``.
|
|
|
|
.. only:: esp32
|
|
|
|
This instruction can access registers in RTC_CNTL, RTC_IO, SENS, and RTC_I2C peripherals. Address of the register, as seen from the ULP, can be calculated from the address of the same register on the DPORT bus as follows::
|
|
|
|
addr_ulp = (addr_dport - DR_REG_RTCCNTL_BASE) / 4
|
|
|
|
.. only:: esp32s2 or esp32s3
|
|
|
|
This instruction can access registers in RTC_CNTL, RTC_IO, SENS, and RTC_I2C peripherals. Address of the the register, as seen from the ULP, can be calculated from the address of the same register on the PeriBUS1 as follows::
|
|
|
|
addr_ulp = (addr_peribus1 - DR_REG_RTCCNTL_BASE) / 4
|
|
|
|
**Examples**::
|
|
|
|
1: REG_WR 0x120, 7, 0, 0x10 // set 8 bits: REG[0x120][7:0] = 0x10
|
|
|
|
|
|
Convenience macros for peripheral registers access
|
|
--------------------------------------------------
|
|
|
|
ULP source files are passed through C preprocessor before the assembler. This allows certain macros to be used to facilitate access to peripheral registers.
|
|
|
|
Some existing macros are defined in ``soc/soc_ulp.h`` header file. These macros allow access to the fields of peripheral registers by their names.
|
|
Peripheral registers names which can be used with these macros are the ones defined in ``soc/rtc_cntl_reg.h``, ``soc/rtc_io_reg.h``, ``soc/sens_reg.h``, and ``soc/rtc_i2c_reg.h``.
|
|
|
|
READ_RTC_REG(rtc_reg, low_bit, bit_width)
|
|
Read up to 16 bits from rtc_reg[low_bit + bit_width - 1 : low_bit] into R0. For example::
|
|
|
|
#include "soc/soc_ulp.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
|
|
/* Read 16 lower bits of RTC_CNTL_TIME0_REG into R0 */
|
|
READ_RTC_REG(RTC_CNTL_TIME0_REG, 0, 16)
|
|
|
|
READ_RTC_FIELD(rtc_reg, field)
|
|
Read from a field in rtc_reg into R0, up to 16 bits. For example::
|
|
|
|
#include "soc/soc_ulp.h"
|
|
#include "soc/sens_reg.h"
|
|
|
|
/* Read 8-bit SENS_TSENS_OUT field of SENS_SAR_SLAVE_ADDR3_REG into R0 */
|
|
READ_RTC_FIELD(SENS_SAR_SLAVE_ADDR3_REG, SENS_TSENS_OUT)
|
|
|
|
WRITE_RTC_REG(rtc_reg, low_bit, bit_width, value)
|
|
Write immediate value into rtc_reg[low_bit + bit_width - 1 : low_bit], bit_width <= 8. For example::
|
|
|
|
#include "soc/soc_ulp.h"
|
|
#include "soc/rtc_io_reg.h"
|
|
|
|
/* Set BIT(2) of RTC_GPIO_OUT_DATA_W1TS field in RTC_GPIO_OUT_W1TS_REG */
|
|
WRITE_RTC_REG(RTC_GPIO_OUT_W1TS_REG, RTC_GPIO_OUT_DATA_W1TS_S + 2, 1, 1)
|
|
|
|
WRITE_RTC_FIELD(rtc_reg, field, value)
|
|
Write immediate value into a field in rtc_reg, up to 8 bits. For example::
|
|
|
|
#include "soc/soc_ulp.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
|
|
/* Set RTC_CNTL_ULP_CP_SLP_TIMER_EN field of RTC_CNTL_STATE0_REG to 0 */
|
|
WRITE_RTC_FIELD(RTC_CNTL_STATE0_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN, 0)
|