esp-idf/components/efuse/esp32c61/include/esp_efuse_rtc_calib.h

77 wiersze
2.7 KiB
C

/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <esp_types.h>
#include <esp_err.h>
#ifdef __cplusplus
extern "C" {
#endif
// TODO: [ESP32C61] IDF-9303, file inherit from verify code, pls check
//This is the ADC calibration value version burnt in efuse
#define ESP_EFUSE_ADC_CALIB_VER1 1
#define ESP_EFUSE_ADC_CALIB_VER2 2
#define ESP_EFUSE_ADC_CALIB_VER_MIN ESP_EFUSE_ADC_CALIB_VER1
#define ESP_EFUSE_ADC_CALIB_VER_MAX ESP_EFUSE_ADC_CALIB_VER2
#define VER2IDX(ver) ((ver) - 1) // Version number to index number of the array
/**
* @brief Get the RTC calibration efuse version
*
* @return Version of the stored efuse
*/
int esp_efuse_rtc_calib_get_ver(void);
/**
* @brief Get the init code in the efuse, for the corresponding attenuation.
*
* @param version Version of the stored efuse
* @param adc_unit ADC unit. Not used, for compatibility. On esp32c61, for calibration v1, both ADC units use the same init code (calibrated by ADC1)
* @param atten Attenuation of the init code
* @return The init code stored in efuse
*/
uint32_t esp_efuse_rtc_calib_get_init_code(int version, uint32_t adc_unit, int atten);
/**
* @brief Get the channel specific calibration compensation
*
* @param version Version of the stored efuse
* @param adc_unit ADC unit. Not used, for compatibility. On esp32c61, for calibration v1, both ADC units use the same init code (calibrated by ADC1)
* @param adc_channel ADC channel number
* @param atten Attenuation of the init code
* @return The channel calibration compensation value
*/
int esp_efuse_rtc_calib_get_chan_compens(int version, uint32_t adc_unit, uint32_t adc_channel, int atten);
/**
* @brief Get the calibration digits stored in the efuse, and the corresponding voltage.
*
* @param version Version of the stored efuse
* @param adc_unit ADC unit (not used on ESP32C61, for compatibility)
* @param atten Attenuation to use
* @param out_digi Output buffer of the digits
* @param out_vol_mv Output of the voltage, in mV
* @return
* - ESP_ERR_INVALID_ARG: If efuse version or attenuation is invalid
* - ESP_OK: if success
*/
esp_err_t esp_efuse_rtc_calib_get_cal_voltage(int version, uint32_t adc_unit, int atten, uint32_t* out_digi, uint32_t* out_vol_mv);
/**
* @brief Get the temperature sensor calibration number delta_T stored in the efuse.
*
* @param tsens_cal Pointer of the specification of temperature sensor calibration number in efuse.
*
* @return ESP_OK if get the calibration value successfully.
* ESP_ERR_INVALID_ARG if can't get the calibration value.
*/
esp_err_t esp_efuse_rtc_calib_get_tsens_val(float* tsens_cal);
#ifdef __cplusplus
}
#endif