kopia lustrzana https://github.com/espressif/esp-idf
394 wiersze
17 KiB
Plaintext
394 wiersze
17 KiB
Plaintext
menu "Main Flash configuration"
|
|
depends on !APP_BUILD_TYPE_PURE_RAM_APP
|
|
|
|
menu "SPI Flash behavior when brownout"
|
|
|
|
config SPI_FLASH_BROWNOUT_RESET_XMC
|
|
bool "Enable sending reset when brownout for XMC flash chips"
|
|
default y
|
|
select SPI_FLASH_BROWNOUT_RESET
|
|
help
|
|
When this option is selected, the patch will be enabled for XMC.
|
|
Follow the recommended flow by XMC for better stability.
|
|
|
|
DO NOT DISABLE UNLESS YOU KNOW WHAT YOU ARE DOING.
|
|
|
|
config SPI_FLASH_BROWNOUT_RESET
|
|
bool
|
|
default y
|
|
select ESP_SYSTEM_BROWNOUT_INTR
|
|
help
|
|
When brownout happens during flash erase/write operations,
|
|
send reset command to stop the flash operations to improve stability.
|
|
|
|
endmenu
|
|
|
|
menu "Optional and Experimental Features (READ DOCS FIRST)"
|
|
|
|
comment "Features here require specific hardware (READ DOCS FIRST!)"
|
|
|
|
config SPI_FLASH_UNDER_HIGH_FREQ
|
|
bool
|
|
default y if ESPTOOLPY_FLASHFREQ_120M
|
|
help
|
|
This is a helper config for HPM. Invisible for users.
|
|
|
|
choice SPI_FLASH_HPM
|
|
prompt "High Performance Mode (READ DOCS FIRST, > 80MHz)"
|
|
# Currently, only esp32s3 allows high performance mode.
|
|
depends on IDF_TARGET_ESP32S3 && !ESPTOOLPY_OCT_FLASH
|
|
default SPI_FLASH_HPM_AUTO
|
|
help
|
|
Whether the High Performance Mode of Flash is enabled. As an optional feature, user needs to manually
|
|
enable this option as a confirmation. To be back-compatible with earlier IDF versionn, this option is
|
|
automatically enabled with warning when Flash running > 80Mhz.
|
|
|
|
config SPI_FLASH_HPM_ENA
|
|
# Not using name of SPI_FLASH_HPM_ENABLE because it was used as an invisible option and we don't want
|
|
# to inherit the value of that one
|
|
bool "Enable"
|
|
config SPI_FLASH_HPM_AUTO
|
|
bool "Auto (Not recommended)"
|
|
config SPI_FLASH_HPM_DIS
|
|
bool "Disabled"
|
|
endchoice
|
|
|
|
config SPI_FLASH_HPM_ON
|
|
bool
|
|
# For ESP32-S3, it's enabled by default. For later chips it should be disabled by default
|
|
default y if IDF_TARGET_ESP32S3 && ((SPI_FLASH_HPM_ENA || SPI_FLASH_HPM_AUTO)) || \
|
|
(!IDF_TARGET_ESP32S3 && SPI_FLASH_HPM_ENA)
|
|
help
|
|
This option is invisible, and will be selected automatically
|
|
when ``ESPTOOLPY_FLASHFREQ_120M`` is selected.
|
|
|
|
choice SPI_FLASH_HPM_DC
|
|
prompt "Support HPM using DC (READ DOCS FIRST)"
|
|
depends on SPI_FLASH_HPM_ON
|
|
default SPI_FLASH_HPM_DC_AUTO
|
|
help
|
|
This feature needs your bootloader to be compiled DC-aware (BOOTLOADER_FLASH_DC_AWARE=y). Otherwise the
|
|
chip will not be able to boot after a reset.
|
|
|
|
config SPI_FLASH_HPM_DC_AUTO
|
|
bool "Auto (Enable when bootloader support enabled (BOOTLOADER_FLASH_DC_AWARE))"
|
|
config SPI_FLASH_HPM_DC_DISABLE
|
|
bool "Disable (READ DOCS FIRST)"
|
|
endchoice
|
|
|
|
config SPI_FLASH_HPM_DC_ON
|
|
bool
|
|
default y if SPI_FLASH_HPM_DC_AUTO && BOOTLOADER_FLASH_DC_AWARE
|
|
help
|
|
This is a helper config for HPM. Whether HPM-DC is enabled is also determined by bootloader.
|
|
Invisible for users.
|
|
|
|
config SPI_FLASH_SUSPEND_QVL_SUPPORTED
|
|
bool
|
|
default y if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32C2
|
|
default n
|
|
help
|
|
This is a helper config. Invisible for users.
|
|
|
|
config SPI_FLASH_AUTO_SUSPEND
|
|
bool "Auto suspend long erase/write operations (READ DOCS FIRST)"
|
|
default n
|
|
depends on SPI_FLASH_SUSPEND_QVL_SUPPORTED && !SPI_FLASH_ROM_IMPL
|
|
help
|
|
This option is disabled by default because it is supported only
|
|
for specific flash chips and for specific Espressif chips.
|
|
To evaluate if you can use this feature refer to
|
|
`Optional Features for Flash` > `Auto Suspend & Resume` of the `ESP-IDF Programming Guide`.
|
|
|
|
CAUTION: If you want to OTA to an app with this feature turned on, please make
|
|
sure the bootloader has the support for it. (later than IDF v4.3)
|
|
|
|
If you are using an official Espressif module, please contact Espressif Business support
|
|
to check if the module has the flash that support this feature installed.
|
|
Also refer to `Concurrency Constraints for Flash on SPI1` > `Flash Auto Suspend Feature`
|
|
before enabling this option.
|
|
|
|
config SPI_FLASH_SUSPEND_TSUS_VAL_US
|
|
int "SPI flash tSUS value (refer to chapter AC CHARACTERISTICS)"
|
|
default 50
|
|
range 20 100
|
|
help
|
|
This config is used for setting Tsus parameter. Tsus means CS# high to next command after
|
|
suspend. You can refer to the chapter of AC CHARACTERISTICS of flash datasheet.
|
|
|
|
endmenu
|
|
endmenu
|
|
|
|
menu "SPI Flash driver"
|
|
depends on !APP_BUILD_TYPE_PURE_RAM_APP
|
|
|
|
config SPI_FLASH_VERIFY_WRITE
|
|
bool "Verify SPI flash writes"
|
|
depends on !SPI_FLASH_ROM_IMPL
|
|
default n
|
|
help
|
|
If this option is enabled, any time SPI flash is written then the data will be read
|
|
back and verified. This can catch hardware problems with SPI flash, or flash which
|
|
was not erased before verification.
|
|
|
|
config SPI_FLASH_LOG_FAILED_WRITE
|
|
bool "Log errors if verification fails"
|
|
depends on SPI_FLASH_VERIFY_WRITE
|
|
default n
|
|
help
|
|
If this option is enabled, if SPI flash write verification fails then a log error line
|
|
will be written with the address, expected & actual values. This can be useful when
|
|
debugging hardware SPI flash problems.
|
|
|
|
config SPI_FLASH_WARN_SETTING_ZERO_TO_ONE
|
|
bool "Log warning if writing zero bits to ones"
|
|
depends on SPI_FLASH_VERIFY_WRITE
|
|
default n
|
|
help
|
|
If this option is enabled, any SPI flash write which tries to set zero bits in the flash to
|
|
ones will log a warning. Such writes will not result in the requested data appearing identically
|
|
in flash once written, as SPI NOR flash can only set bits to one when an entire sector is erased.
|
|
After erasing, individual bits can only be written from one to zero.
|
|
|
|
Note that some software (such as SPIFFS) which is aware of SPI NOR flash may write one bits as an
|
|
optimisation, relying on the data in flash becoming a bitwise AND of the new data and any existing data.
|
|
Such software will log spurious warnings if this option is enabled.
|
|
|
|
config SPI_FLASH_ENABLE_COUNTERS
|
|
bool "Enable operation counters"
|
|
default n
|
|
help
|
|
This option enables the following APIs:
|
|
|
|
- esp_flash_reset_counters
|
|
- esp_flash_dump_counters
|
|
- esp_flash_get_counters
|
|
|
|
These APIs may be used to collect performance data for spi_flash APIs
|
|
and to help understand behaviour of libraries which use SPI flash.
|
|
|
|
config SPI_FLASH_ROM_DRIVER_PATCH
|
|
bool "Enable SPI flash ROM driver patched functions"
|
|
default y
|
|
help
|
|
Enable this flag to use patched versions of SPI flash ROM driver functions.
|
|
This option should be enabled, if any one of the following is true: (1) need to write
|
|
to flash on ESP32-D2WD; (2) main SPI flash is connected to non-default pins; (3) main
|
|
SPI flash chip is manufactured by ISSI.
|
|
|
|
config SPI_FLASH_ROM_IMPL
|
|
bool "Use esp_flash implementation in ROM"
|
|
depends on ESP_ROM_HAS_SPI_FLASH
|
|
default n
|
|
help
|
|
Enable this flag to use new SPI flash driver functions from ROM instead of ESP-IDF.
|
|
|
|
If keeping this as "n" in your project, you will have less free IRAM.
|
|
But you can use all of our flash features.
|
|
|
|
If making this as "y" in your project, you will increase free IRAM.
|
|
But you may miss out on some flash features and support for new flash chips.
|
|
|
|
Currently the ROM cannot support the following features:
|
|
|
|
- SPI_FLASH_AUTO_SUSPEND (C3, S3)
|
|
|
|
choice SPI_FLASH_DANGEROUS_WRITE
|
|
bool "Writing to dangerous flash regions"
|
|
default SPI_FLASH_DANGEROUS_WRITE_ALLOWED if APP_BUILD_TYPE_RAM
|
|
default SPI_FLASH_DANGEROUS_WRITE_ABORTS
|
|
help
|
|
SPI flash APIs can optionally abort or return a failure code
|
|
if erasing or writing addresses that fall at the beginning
|
|
of flash (covering the bootloader and partition table) or that
|
|
overlap the app partition that contains the running app.
|
|
|
|
It is not recommended to ever write to these regions from an IDF app,
|
|
and this check prevents logic errors or corrupted firmware memory from
|
|
damaging these regions.
|
|
|
|
Note that this feature *does not* check calls to the esp_rom_xxx SPI flash
|
|
ROM functions. These functions should not be called directly from IDF
|
|
applications.
|
|
|
|
config SPI_FLASH_DANGEROUS_WRITE_ABORTS
|
|
bool "Aborts"
|
|
config SPI_FLASH_DANGEROUS_WRITE_FAILS
|
|
bool "Fails"
|
|
config SPI_FLASH_DANGEROUS_WRITE_ALLOWED
|
|
bool "Allowed"
|
|
endchoice
|
|
|
|
config SPI_FLASH_SHARE_SPI1_BUS
|
|
bool "Support other devices attached to SPI1 bus"
|
|
default n
|
|
depends on IDF_TARGET_ESP32
|
|
select SPI_MASTER_ISR_IN_IRAM
|
|
help
|
|
Each SPI bus needs a lock for arbitration among devices. This allows multiple
|
|
devices on a same bus, but may reduce the speed of esp_flash driver access to the
|
|
main flash chip.
|
|
|
|
If you only need to use esp_flash driver to access the main flash chip, disable
|
|
this option, and the lock will be bypassed on SPI1 bus. Otherwise if extra devices
|
|
are needed to attach to SPI1 bus, enable this option.
|
|
|
|
config SPI_FLASH_BYPASS_BLOCK_ERASE
|
|
bool "Bypass a block erase and always do sector erase"
|
|
default n
|
|
help
|
|
Some flash chips can have very high "max" erase times, especially for block erase (32KB or 64KB).
|
|
This option allows to bypass "block erase" and always do sector erase commands.
|
|
This will be much slower overall in most cases, but improves latency for other code to run.
|
|
|
|
config SPI_FLASH_YIELD_DURING_ERASE
|
|
bool "Enables yield operation during flash erase"
|
|
default y
|
|
help
|
|
This allows to yield the CPUs between erase commands.
|
|
Prevents starvation of other tasks.
|
|
Please use this configuration together with ``SPI_FLASH_ERASE_YIELD_DURATION_MS`` and
|
|
``SPI_FLASH_ERASE_YIELD_TICKS`` after carefully checking flash datasheet to avoid a
|
|
watchdog timeout.
|
|
For more information, please check `SPI Flash API` reference documenation
|
|
under section `OS Function`.
|
|
|
|
config SPI_FLASH_ERASE_YIELD_DURATION_MS
|
|
int "Duration of erasing to yield CPUs (ms)"
|
|
depends on SPI_FLASH_YIELD_DURING_ERASE
|
|
default 20
|
|
help
|
|
If a duration of one erase command is large
|
|
then it will yield CPUs after finishing a current command.
|
|
|
|
config SPI_FLASH_ERASE_YIELD_TICKS
|
|
int "CPU release time (tick) for an erase operation"
|
|
depends on SPI_FLASH_YIELD_DURING_ERASE
|
|
default 1
|
|
help
|
|
Defines how many ticks will be before returning to continue a erasing.
|
|
|
|
config SPI_FLASH_WRITE_CHUNK_SIZE
|
|
int "Flash write chunk size"
|
|
default 8192
|
|
range 256 8192
|
|
help
|
|
Flash write is broken down in terms of multiple (smaller) write operations.
|
|
This configuration options helps to set individual write chunk size, smaller
|
|
value here ensures that cache (and non-IRAM resident interrupts) remains
|
|
disabled for shorter duration.
|
|
|
|
config SPI_FLASH_SIZE_OVERRIDE
|
|
bool "Override flash size in bootloader header by ESPTOOLPY_FLASHSIZE"
|
|
default n
|
|
help
|
|
SPI Flash driver uses the flash size configured in bootloader header by default.
|
|
Enable this option to override flash size with latest ESPTOOLPY_FLASHSIZE value from
|
|
the app header if the size in the bootloader header is incorrect.
|
|
|
|
config SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
|
|
bool "Flash timeout checkout disabled"
|
|
default n
|
|
help
|
|
This option is helpful if you are using a flash chip whose timeout is quite large or unpredictable.
|
|
|
|
config SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST
|
|
bool "Override default chip driver list"
|
|
default n
|
|
help
|
|
This option allows the chip driver list to be customized, instead of using the default list provided by
|
|
ESP-IDF.
|
|
|
|
When this option is enabled, the default list is no longer compiled or linked. Instead, the
|
|
`default_registered_chips` structure must be provided by the user.
|
|
|
|
See example: custom_chip_driver under examples/storage for more details.
|
|
|
|
menu "Auto-detect flash chips"
|
|
visible if !SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST
|
|
|
|
orsource "./$IDF_TARGET/Kconfig.soc_caps.in"
|
|
|
|
config SPI_FLASH_SUPPORT_ISSI_CHIP
|
|
bool "ISSI"
|
|
default y if SPI_FLASH_VENDOR_ISSI_SUPPORTED
|
|
default n
|
|
help
|
|
Enable this to support auto detection of ISSI chips if chip vendor not directly
|
|
given by ``chip_drv`` member of the chip struct. This adds support for variant
|
|
chips, however will extend detecting time.
|
|
|
|
config SPI_FLASH_SUPPORT_MXIC_CHIP
|
|
bool "MXIC"
|
|
default y if SPI_FLASH_VENDOR_MXIC_SUPPORTED
|
|
default n
|
|
help
|
|
Enable this to support auto detection of MXIC chips if chip vendor not directly
|
|
given by ``chip_drv`` member of the chip struct. This adds support for variant
|
|
chips, however will extend detecting time.
|
|
|
|
config SPI_FLASH_SUPPORT_GD_CHIP
|
|
bool "GigaDevice"
|
|
default y if SPI_FLASH_VENDOR_GD_SUPPORTED
|
|
default n
|
|
help
|
|
Enable this to support auto detection of GD (GigaDevice) chips if chip vendor not
|
|
directly given by ``chip_drv`` member of the chip struct. If you are using Wrover
|
|
modules, please don't disable this, otherwise your flash may not work in 4-bit
|
|
mode.
|
|
|
|
This adds support for variant chips, however will extend detecting time and image
|
|
size. Note that the default chip driver supports the GD chips with product ID
|
|
60H.
|
|
|
|
config SPI_FLASH_SUPPORT_WINBOND_CHIP
|
|
bool "Winbond"
|
|
default y if SPI_FLASH_VENDOR_WINBOND_SUPPORTED
|
|
default n
|
|
help
|
|
Enable this to support auto detection of Winbond chips if chip vendor not directly
|
|
given by ``chip_drv`` member of the chip struct. This adds support for variant
|
|
chips, however will extend detecting time.
|
|
|
|
config SPI_FLASH_SUPPORT_BOYA_CHIP
|
|
bool "BOYA"
|
|
# ESP32 doens't usually use this chip, default n to save iram.
|
|
default y if SPI_FLASH_VENDOR_BOYA_SUPPORTED
|
|
default n
|
|
help
|
|
Enable this to support auto detection of BOYA chips if chip vendor not directly
|
|
given by ``chip_drv`` member of the chip struct. This adds support for variant
|
|
chips, however will extend detecting time.
|
|
|
|
config SPI_FLASH_SUPPORT_TH_CHIP
|
|
bool "TH"
|
|
# ESP32 doens't usually use this chip, default n to save iram.
|
|
default y if SPI_FLASH_VENDOR_TH_SUPPORTED
|
|
default n
|
|
help
|
|
Enable this to support auto detection of TH chips if chip vendor not directly
|
|
given by ``chip_drv`` member of the chip struct. This adds support for variant
|
|
chips, however will extend detecting time.
|
|
|
|
config SPI_FLASH_SUPPORT_MXIC_OPI_CHIP
|
|
bool "mxic (opi)"
|
|
depends on IDF_TARGET_ESP32S3
|
|
default y
|
|
help
|
|
Enable this to support auto detection of Octal MXIC chips if chip vendor not directly
|
|
given by ``chip_drv`` member of the chip struct. This adds support for variant
|
|
chips, however will extend detecting time.
|
|
|
|
endmenu #auto detect flash chips
|
|
|
|
config SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE
|
|
bool "Enable encrypted partition read/write operations"
|
|
default y
|
|
help
|
|
This option enables flash read/write operations to encrypted partition/s. This option
|
|
is kept enabled irrespective of state of flash encryption feature. However, in case
|
|
application is not using flash encryption feature and is in need of some additional
|
|
memory from IRAM region (~1KB) then this config can be disabled.
|
|
|
|
endmenu
|