mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

change(pm/ext1): replace esp_sleep_set_ext1_wakeup_io by esp_sleep_enable_ext1_wakeup_io

pull/12501/merge
Lou Tianhao 2023-11-20 14:27:54 +08:00
rodzic d97f45b3a8
commit 8db9f79bd2
11 zmienionych plików z 23 dodań i 29 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

8
components/esp_hw_support/include/esp_sleep.h
Wyświetl plik

@ -269,7 +269,7 @@ esp_err_t esp_sleep_enable_ext0_wakeup(gpio_num_t gpio_num, int level);
*
* @note Call this func will reset the previous ext1 configuration.
*
* @note This function will be deprecated in release/v6.0. Please switch to use `esp_sleep_set_ext1_wakeup_io` and `esp_sleep_clear_ext1_wakeup_io`
* @note This function will be deprecated in release/v6.0. Please switch to use `esp_sleep_enable_ext1_wakeup_io` and `esp_sleep_clear_ext1_wakeup_io`
*
* @param io_mask Bit mask of GPIO numbers which will cause wakeup. Only GPIOs
* which have RTC functionality can be used in this bit map.
@ -320,8 +320,6 @@ esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t io_mask, esp_sleep_ext1_wakeup_m
* the pins during sleep. HOLD feature will be acted on the pin internally
* before the system entering sleep, and this can further reduce power consumption.
*
* @note this func allows to increase the configuration for ext1 without resetting the previous configuration.
*
* @param io_mask Bit mask of GPIO numbers which will cause wakeup. Only GPIOs
* which have RTC functionality can be used in this bit map.
* For different SoCs, the related GPIOs are:
@ -344,7 +342,7 @@ esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t io_mask, esp_sleep_ext1_wakeup_m
* - ESP_ERR_NOT_ALLOWED when wakeup level will become different between
* ext1 IOs if !SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
*/
esp_err_t esp_sleep_set_ext1_wakeup_io(uint64_t io_mask, esp_sleep_ext1_wakeup_mode_t level_mode);
esp_err_t esp_sleep_enable_ext1_wakeup_io(uint64_t io_mask, esp_sleep_ext1_wakeup_mode_t level_mode);
/**
* @brief Disable ext1 wakeup pins with IO masks. This will remove selected IOs from the wakeup IOs.
@ -403,7 +401,7 @@ esp_err_t esp_sleep_clear_ext1_wakeup_io(uint64_t io_mask);
* or mode is invalid
*/
esp_err_t esp_sleep_enable_ext1_wakeup_with_level_mask(uint64_t io_mask, uint64_t level_mask)
__attribute__((deprecated("please use 'esp_sleep_set_ext1_wakeup_io' and 'esp_sleep_clear_ext1_wakeup_io' instead")));
__attribute__((deprecated("please use 'esp_sleep_enable_ext1_wakeup_io' and 'esp_sleep_clear_ext1_wakeup_io' instead")));
#endif // SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
#endif // SOC_PM_SUPPORT_EXT1_WAKEUP

4
components/esp_hw_support/sleep_modes.c
Wyświetl plik

@ -1494,11 +1494,11 @@ esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t io_mask, esp_sleep_ext1_wakeup_m
// Reset all EXT1 configs
esp_sleep_clear_ext1_wakeup_io(0);
return esp_sleep_set_ext1_wakeup_io(io_mask, level_mode);
return esp_sleep_enable_ext1_wakeup_io(io_mask, level_mode);
}
esp_err_t esp_sleep_set_ext1_wakeup_io(uint64_t io_mask, esp_sleep_ext1_wakeup_mode_t level_mode)
esp_err_t esp_sleep_enable_ext1_wakeup_io(uint64_t io_mask, esp_sleep_ext1_wakeup_mode_t level_mode)
{
if (io_mask == 0 && level_mode > ESP_EXT1_WAKEUP_ANY_HIGH) {
return ESP_ERR_INVALID_ARG;

2
components/esp_pm/test_apps/esp_pm/main/test_pm.c
Wyświetl plik

@ -182,7 +182,7 @@ TEST_CASE("Can wake up from automatic light sleep by GPIO", "[pm][ignore]")
rtc_gpio_set_level(ext1_wakeup_gpio, 0);
/* Enable wakeup */
TEST_ESP_OK(esp_sleep_set_ext1_wakeup_io(1ULL << ext1_wakeup_gpio, ESP_EXT1_WAKEUP_ANY_HIGH));
TEST_ESP_OK(esp_sleep_enable_ext1_wakeup_io(1ULL << ext1_wakeup_gpio, ESP_EXT1_WAKEUP_ANY_HIGH));
/* To simplify test environment, we'll use a ULP program to set GPIO high */
ulp_insn_t ulp_code[] = {

12
components/esp_system/test_apps/esp_system_unity_tests/main/test_sleep.c
Wyświetl plik

@ -416,7 +416,7 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is off (13 high)", "[deepsleep][ig
{
// This test needs external pulldown
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_HIGH));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_HIGH));
esp_deep_sleep_start();
}
@ -425,9 +425,9 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is off (13 low)", "[deepsleep][ign
// This test needs external pullup
ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
#if CONFIG_IDF_TARGET_ESP32
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
#else
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_LOW));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_LOW));
#endif
esp_deep_sleep_start();
}
@ -438,7 +438,7 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is on (13 high)", "[deepsleep][ign
ESP_ERROR_CHECK(gpio_pullup_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(gpio_pulldown_en(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON));
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_HIGH));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_HIGH));
esp_deep_sleep_start();
}
@ -449,9 +449,9 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is on (13 low)", "[deepsleep][igno
ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON));
#if CONFIG_IDF_TARGET_ESP32
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
#else
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_LOW));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ANY_LOW));
#endif
esp_deep_sleep_start();
}

6
docs/en/api-reference/system/sleep_modes.rst
Wyświetl plik

@ -248,15 +248,13 @@ RTC peripherals or RTC memories do not need to be powered on during sleep in thi
gpio_pullup_dis(gpio_num);
gpio_pulldown_en(gpio_num);
:cpp:func:`esp_sleep_set_ext1_wakeup_io` function can be used to append ext1 wakeup IO and set corresponding wakeup level.
:cpp:func:`esp_sleep_enable_ext1_wakeup_io` function can be used to append ext1 wakeup IO and set corresponding wakeup level.
:cpp:func:`esp_sleep_clear_ext1_wakeup_io` function can be used to remove ext1 wakeup IO.
:cpp:func:`esp_sleep_enable_ext1_wakeup` function can be used to reset all previous ext1 wakeup configurations and enable new ext1 wakeup IO and set corresponding wakeup level.
.. only:: SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
The RTC controller also supports triggering wakeup, allowing configurable IO to use different wakeup levels simultaneously. This can be configured with :cpp:func`esp_sleep_set_ext1_wakeup_io`.
The RTC controller also supports triggering wakeup, allowing configurable IO to use different wakeup levels simultaneously. This can be configured with :cpp:func`esp_sleep_enable_ext1_wakeup_io`.
.. warning::

2
docs/en/migration-guides/release-5.x/5.3/system.rst
Wyświetl plik

@ -6,4 +6,4 @@ System
Power Management
-----------------------
* ``esp_sleep_enable_ext1_wakeup_with_level_mask`` is deprecated, use ``esp_sleep_set_ext1_wakeup_io`` and ``esp_sleep_clear_ext1_wakeup_io`` instead.
* ``esp_sleep_enable_ext1_wakeup_with_level_mask`` is deprecated, use ``esp_sleep_enable_ext1_wakeup_io`` and ``esp_sleep_clear_ext1_wakeup_io`` instead.

6
docs/zh_CN/api-reference/system/sleep_modes.rst
Wyświetl plik

@ -248,15 +248,13 @@ RTC 控制器中内嵌定时器，可用于在预定义的时间到达后唤醒
gpio_pullup_dis(gpio_num);
gpio_pulldown_en(gpio_num);
可调用 :cpp:func:`esp_sleep_set_ext1_wakeup_io` 函数可用于增加 ext1 唤醒 IO 并设置相应的唤醒电平。
可调用 :cpp:func:`esp_sleep_enable_ext1_wakeup_io` 函数可用于增加 ext1 唤醒 IO 并设置相应的唤醒电平。
可调用 :cpp:func:`esp_sleep_clear_ext1_wakeup_io` 函数可用于移除 ext1 唤醒 IO。
可调用 :cpp:func:`esp_sleep_enable_ext1_wakeup` 函数可用于重置所有先前的 ext1 唤醒配置，并启用新的 ext1 唤醒 IO 并设置相应的唤醒电平。
.. only:: SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
当前的 RTC 控制器也包含更强大的逻辑，允许配置的 IO 同时使用不同的唤醒电平。这可以通过:cpp:func:`esp_sleep_set_ext1_wakeup_io` 函数来进行配置。
当前的 RTC 控制器也包含更强大的逻辑，允许配置的 IO 同时使用不同的唤醒电平。这可以通过:cpp:func:`esp_sleep_enable_ext1_wakeup_io` 函数来进行配置。
.. warning::

2
examples/bluetooth/nimble/throughput_app/blecent_throughput/components/cmd_system/cmd_system.c
Wyświetl plik

@ -217,7 +217,7 @@ static int deep_sleep(int argc, char **argv)
io_num, level ? "HIGH" : "LOW");
#if SOC_PM_SUPPORT_EXT1_WAKEUP
ESP_ERROR_CHECK( esp_sleep_set_ext1_wakeup_io(1ULL << io_num, level) );
ESP_ERROR_CHECK( esp_sleep_enable_ext1_wakeup_io(1ULL << io_num, level) );
#endif
}

2
examples/openthread/ot_sleepy_device/deep_sleep/main/esp_ot_sleepy_device.c
Wyświetl plik

@ -151,7 +151,7 @@ static void ot_deep_sleep_init(void)
// The configuration mode depends on your hardware design.
// Since the BOOT button is connected to a pull-up resistor, the wake-up mode is configured as LOW.
const uint64_t ext_wakeup_mode = 0;
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(gpio_wakeup_pin_mask, ext_wakeup_mode));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(gpio_wakeup_pin_mask, ext_wakeup_mode));
// Also these two GPIO configurations are also depended on the hardware design.
// The BOOT button is connected to the pull-up resistor, so enable the pull-up mode and disable the pull-down mode.

2
examples/system/console/advanced/components/cmd_system/cmd_system_sleep.c
Wyświetl plik

@ -82,7 +82,7 @@ static int deep_sleep(int argc, char **argv)
ESP_LOGI(TAG, "Enabling wakeup on GPIO%d, wakeup on %s level",
io_num, level ? "HIGH" : "LOW");
ESP_ERROR_CHECK( esp_sleep_set_ext1_wakeup_io(1ULL << io_num, level) );
ESP_ERROR_CHECK( esp_sleep_enable_ext1_wakeup_io(1ULL << io_num, level) );
ESP_LOGE(TAG, "GPIO wakeup from deep sleep currently unsupported on ESP32-C3");
}
#endif // SOC_PM_SUPPORT_EXT1_WAKEUP

6
examples/system/deep_sleep/main/ext_wakeup.c
Wyświetl plik

@ -40,10 +40,10 @@ void example_deep_sleep_register_ext1_wakeup(void)
printf("Enabling EXT1 wakeup on pins GPIO%d, GPIO%d\n", ext_wakeup_pin_1, ext_wakeup_pin_2);
#if SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(ext_wakeup_pin_1_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_1));
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(ext_wakeup_pin_2_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_2));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(ext_wakeup_pin_1_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_1));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(ext_wakeup_pin_2_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_2));
#else
ESP_ERROR_CHECK(esp_sleep_set_ext1_wakeup_io(ext_wakeup_pin_1_mask | ext_wakeup_pin_2_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(ext_wakeup_pin_1_mask | ext_wakeup_pin_2_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE));
#endif
/* If there are no external pull-up/downs, tie wakeup pins to inactive level with internal pull-up/downs via RTC IO