kopia lustrzana https://github.com/espressif/esp-idf
docs: update wear levelling cn trans
intern
rodzic
c04803e88b
commit
89bec6cd27
|
|
@ -5,6 +5,7 @@ Wear Levelling API
|
|||
|
||||
Overview
|
||||
--------
|
||||
|
||||
Most of flash memory and especially SPI flash that is used in {IDF_TARGET_NAME} has a sector-based organization and also has a limited number of erase/modification cycles per memory sector. The wear levelling component helps to distribute wear and tear among sectors more evenly without requiring any attention from the user.
|
||||
|
||||
The wear levelling component provides API functions related to reading, writing, erasing, and memory mapping of data in external SPI flash through the partition component. The component also has higher-level API functions which work with the FAT filesystem defined in :doc:`FAT filesystem </api-reference/storage/fatfs>`.
|
||||
|
|
@ -17,12 +18,12 @@ To save internal memory, the component has two additional modes which both use s
|
|||
- **Safety mode.** The data is first saved to flash memory, and after the sector is erased, the data is saved back. If a device is powered off, the data can be recovered as soon as the device boots up.
|
||||
|
||||
The default settings are as follows:
|
||||
|
||||
- Sector size is 512 bytes
|
||||
- Performance mode
|
||||
|
||||
You can change the settings through the configuration menu.
|
||||
|
||||
|
||||
The wear levelling component does not cache data in RAM. The write and erase functions modify flash directly, and flash contents are consistent when the function returns.
|
||||
|
||||
|
||||
|
|
@ -46,4 +47,3 @@ Memory Size
|
|||
-----------
|
||||
|
||||
The memory size is calculated in the wear levelling module based on partition parameters. The module uses some sectors of flash for internal data.
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
概述
|
||||
--------
|
||||
|
||||
ESP32 所使用的 flash，特别是 SPI flash 多数具备扇区结构，且每个扇区仅允许有限次数的擦除/修改操作。为了避免过度使用某一扇区，乐鑫提供了磨损均衡组件，无需用户介入即可帮助用户均衡各个扇区之间的磨损。
|
||||
{IDF_TARGET_NAME} 所使用的 flash，特别是 SPI flash，多数具备扇区结构，且每个扇区仅允许有限次数的擦除/修改操作。为了避免过度使用某一扇区，乐鑫提供了磨损均衡组件，无需用户介入即可帮助用户均衡各个扇区之间的磨损。
|
||||
|
||||
磨损均衡组件包含了通过分区组件对外部 SPI flash 进行数据读取、写入、擦除和存储器映射相关的 API 函数。磨损均衡组件还具有软件上更高级别的 API 函数，与 :doc:`FAT 文件系统 </api-reference/storage/fatfs>` 协同工作。
|
||||
|
||||
|
|
@ -26,6 +26,7 @@ ESP32 所使用的 flash，特别是 SPI flash 多数具备扇区结构，且每
|
|||
|
||||
磨损均衡组件不会将数据缓存在 RAM 中。写入和擦除函数直接修改 flash，函数返回后，flash 即完成修改。
|
||||
|
||||
|
||||
磨损均衡访问 API
|
||||
-----------------------------------
|
||||
|
||||
|
|
@ -41,6 +42,7 @@ ESP32 所使用的 flash，特别是 SPI flash 多数具备扇区结构，且每
|
|||
|
||||
请尽量避免直接使用原始磨损均衡函数，建议您使用文件系统特定的函数。
|
||||
|
||||
|
||||
内存大小
|
||||
-----------
|
||||
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue