mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

drivers: fix issue reported by coverity

pull/11655/head
morris 2023-06-02 10:30:38 +08:00
rodzic d1934d8c45
commit 630b1b079e
5 zmienionych plików z 11 dodań i 186 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

4
components/esp_hw_support/dma/gdma.c
Wyświetl plik

@ -726,7 +726,7 @@ static void IRAM_ATTR gdma_default_rx_isr(void *args)
gdma_ll_rx_clear_interrupt_status(group->hal.dev, pair->pair_id, intr_status);
if (intr_status & GDMA_LL_EVENT_RX_SUC_EOF) {
if (rx_chan && rx_chan->on_recv_eof) {
if (rx_chan->on_recv_eof) {
uint32_t eof_addr = gdma_ll_rx_get_success_eof_desc_addr(group->hal.dev, pair->pair_id);
gdma_event_data_t edata = {
.rx_eof_desc_addr = eof_addr
@ -737,7 +737,7 @@ static void IRAM_ATTR gdma_default_rx_isr(void *args)
}
}
if (intr_status & GDMA_LL_EVENT_RX_DESC_ERROR) {
if (rx_chan && rx_chan->on_descr_err) {
if (rx_chan->on_descr_err) {
if (rx_chan->on_descr_err(&rx_chan->base, NULL, rx_chan->user_data)) {
need_yield = true;
}

5
components/hal/esp32s3/include/hal/i2c_ll.h
Wyświetl plik

@ -300,10 +300,7 @@ static inline void i2c_ll_set_slave_addr(i2c_dev_t *hw, uint16_t slave_addr, boo
__attribute__((always_inline))
static inline void i2c_ll_write_cmd_reg(i2c_dev_t *hw, i2c_ll_hw_cmd_t cmd, int cmd_idx)
{
ESP_STATIC_ASSERT(sizeof(i2c_comd0_reg_t) == sizeof(i2c_ll_hw_cmd_t),
"i2c_comdX_reg_t structure size must be equal to i2c_ll_hw_cmd_t structure size");
volatile i2c_ll_hw_cmd_t* commands = (volatile i2c_ll_hw_cmd_t*) &hw->comd0;
commands[cmd_idx].val = cmd.val;
hw->comd[cmd_idx].val = cmd.val;
}
/**

184
components/soc/esp32s3/include/soc/i2c_struct.h
Wyświetl plik

@ -902,8 +902,8 @@ typedef union {
/** Group: Command registers */
/** Type of comd0 register
* I2C command register 0
/** Type of command register
* I2C command register
*/
typedef union {
struct {
@ -915,181 +915,16 @@ typedef union {
* structure for more
* Information.
*/
uint32_t command0:14;
uint32_t command:14;
uint32_t reserved_14:17;
/** command0_done : R/W/SS; bitpos: [31]; default: 0;
* When command 0 is done in I2C Master mode, this bit changes to high
* level.
*/
uint32_t command0_done:1;
uint32_t command_done:1;
};
uint32_t val;
} i2c_comd0_reg_t;
/** Type of comd1 register
* I2C command register 1
*/
typedef union {
struct {
/** command1 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 1. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command1:14;
uint32_t reserved_14:17;
/** command1_done : R/W/SS; bitpos: [31]; default: 0;
* When command 1 is done in I2C Master mode, this bit changes to high
* level.
*/
uint32_t command1_done:1;
};
uint32_t val;
} i2c_comd1_reg_t;
/** Type of comd2 register
* I2C command register 2
*/
typedef union {
struct {
/** command2 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 2. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command2:14;
uint32_t reserved_14:17;
/** command2_done : R/W/SS; bitpos: [31]; default: 0;
* When command 2 is done in I2C Master mode, this bit changes to high
* Level.
*/
uint32_t command2_done:1;
};
uint32_t val;
} i2c_comd2_reg_t;
/** Type of comd3 register
* I2C command register 3
*/
typedef union {
struct {
/** command3 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 3. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command3:14;
uint32_t reserved_14:17;
/** command3_done : R/W/SS; bitpos: [31]; default: 0;
* When command 3 is done in I2C Master mode, this bit changes to high
* level.
*/
uint32_t command3_done:1;
};
uint32_t val;
} i2c_comd3_reg_t;
/** Type of comd4 register
* I2C command register 4
*/
typedef union {
struct {
/** command4 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 4. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command4:14;
uint32_t reserved_14:17;
/** command4_done : R/W/SS; bitpos: [31]; default: 0;
* When command 4 is done in I2C Master mode, this bit changes to high
* level.
*/
uint32_t command4_done:1;
};
uint32_t val;
} i2c_comd4_reg_t;
/** Type of comd5 register
* I2C command register 5
*/
typedef union {
struct {
/** command5 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 5. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command5:14;
uint32_t reserved_14:17;
/** command5_done : R/W/SS; bitpos: [31]; default: 0;
* When command 5 is done in I2C Master mode, this bit changes to high level.
*/
uint32_t command5_done:1;
};
uint32_t val;
} i2c_comd5_reg_t;
/** Type of comd6 register
* I2C command register 6
*/
typedef union {
struct {
/** command6 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 6. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command6:14;
uint32_t reserved_14:17;
/** command6_done : R/W/SS; bitpos: [31]; default: 0;
* When command 6 is done in I2C Master mode, this bit changes to high level.
*/
uint32_t command6_done:1;
};
uint32_t val;
} i2c_comd6_reg_t;
/** Type of comd7 register
* I2C command register 7
*/
typedef union {
struct {
/** command7 : R/W; bitpos: [13:0]; default: 0;
* This is the content of command 7. It consists of three parts:
* op_code is the command, 0: RSTART; 1: WRITE; 2: READ; 3: STOP; 4: END.
* Byte_num represents the number of bytes that need to be sent or received.
* ack_check_en, ack_exp and ack are used to control the ACK bit. See I2C cmd
* structure for more
* Information.
*/
uint32_t command7:14;
uint32_t reserved_14:17;
/** command7_done : R/W/SS; bitpos: [31]; default: 0;
* When command 7 is done in I2C Master mode, this bit changes to high level.
*/
uint32_t command7_done:1;
};
uint32_t val;
} i2c_comd7_reg_t;
} i2c_comd_reg_t;
/** Group: Version register */
@ -1158,14 +993,7 @@ typedef struct {
volatile i2c_scl_stop_setup_reg_t scl_stop_setup;
volatile i2c_filter_cfg_reg_t filter_cfg;
volatile i2c_clk_conf_reg_t clk_conf;
volatile i2c_comd0_reg_t comd0;
volatile i2c_comd1_reg_t comd1;
volatile i2c_comd2_reg_t comd2;
volatile i2c_comd3_reg_t comd3;
volatile i2c_comd4_reg_t comd4;
volatile i2c_comd5_reg_t comd5;
volatile i2c_comd6_reg_t comd6;
volatile i2c_comd7_reg_t comd7;
volatile i2c_comd_reg_t comd[8];
volatile i2c_scl_st_time_out_reg_t scl_st_time_out;
volatile i2c_scl_main_st_time_out_reg_t scl_main_st_time_out;
volatile i2c_scl_sp_conf_reg_t scl_sp_conf;

2
components/touch_element/touch_element.c
Wyświetl plik

@ -361,7 +361,7 @@ static void te_intr_cb(void *arg)
static int scan_done_cnt = 0;
static uint32_t touch_pre_trig_status = 0;
int task_awoken = pdFALSE;
te_intr_msg_t te_intr_msg;
te_intr_msg_t te_intr_msg = {};
/*< Figure out which touch sensor channel is triggered and the trigger type */
uint32_t intr_mask = touch_pad_read_intr_status_mask();
if (intr_mask == 0x0) { //For dummy interrupt

2
docs/en/api-reference/peripherals/twai.rst
Wyświetl plik

@ -50,7 +50,7 @@ TWAI Messages are split into Data Frames and Remote Frames. Data Frames are used
Error States and Counters
^^^^^^^^^^^^^^^^^^^^^^^^^
The TWAI protocol implements a feature known as "fault confinement" where a persistently erroneous node will eventually eliminate itself form the bus. This is implemented by requiring every node to maintain two internal error counters known as the **Transmit Error Counter (TEC)** and the **Receive Error Counter (REC)**. The two error counters are incremented and decremented according to a set of rules (where the counters increase on an error, and decrease on a successful message transmission/reception). The values of the counters are used to determine a node's **error state**, namely **Error Active**, **Error Passive**, and **Bus-Off**.
The TWAI protocol implements a feature known as "fault confinement" where a persistently erroneous node will eventually eliminate itself from the bus. This is implemented by requiring every node to maintain two internal error counters known as the **Transmit Error Counter (TEC)** and the **Receive Error Counter (REC)**. The two error counters are incremented and decremented according to a set of rules (where the counters increase on an error, and decrease on a successful message transmission/reception). The values of the counters are used to determine a node's **error state**, namely **Error Active**, **Error Passive**, and **Bus-Off**.
**Error Active:** A node is Error Active when **both TEC and REC are less than 128** and indicates that the node is operating normally. Error Active nodes are allowed to participate in bus communications, and will actively signal the detection of any errors by automatically transmitting an **Active Error Flag** over the bus.