mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Add esp32c2 controller support.

pull/9141/head
Geng Yuchao 2022-06-03 22:00:50 +08:00
rodzic a692abd423
commit 5c3f0bfe7c
3 zmienionych plików z 1470 dodań i 0 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

1001
components/bt/controller/esp32c2/bt.c 100644
Wyświetl plik

Plik diff jest za duży Load Diff

469
components/bt/include/esp32c2/include/esp_bt.h 100644
Wyświetl plik

@ -0,0 +1,469 @@
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef __ESP_BT_H__
#define __ESP_BT_H__
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "sdkconfig.h"
#include "esp_task.h"
#include "nimble/nimble_npl.h"
#include "syscfg/syscfg.h"
#include "esp_nimble_cfg.h"
#ifdef __cplusplus
extern "C" {
#endif
#if (SOC_ESP_NIMBLE_CONTROLLER)
#define NIMBLE_LL_STACK_SIZE CONFIG_BT_LE_CONTROLLER_TASK_STACK_SIZE
#endif
/**
* @brief Bluetooth mode for controller enable/disable
*/
typedef enum {
ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */
ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */
ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */
ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */
} esp_bt_mode_t;
/**
* @brief Bluetooth controller enable/disable/initialised/de-initialised status
*/
typedef enum {
ESP_BT_CONTROLLER_STATUS_IDLE = 0, /*!< Controller is in idle state */
ESP_BT_CONTROLLER_STATUS_INITED, /*!< Controller is in initialising state */
ESP_BT_CONTROLLER_STATUS_ENABLED, /*!< Controller is in enabled state */
ESP_BT_CONTROLLER_STATUS_NUM, /*!< Controller is in disabled state */
} esp_bt_controller_status_t;
/**
* @brief BLE tx power type
* ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed.
* when disconnect, the correspond TX power is not effected.
* ESP_BLE_PWR_TYPE_ADV : for advertising/scan response.
* ESP_BLE_PWR_TYPE_SCAN : for scan.
* ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value.
* if neither in scan mode nor in adv mode, it will use this default value.
* If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9.
*/
typedef enum {
ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */
ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */
ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */
ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */
ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */
ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */
ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */
ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */
ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */
ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */
ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */
ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */
ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */
} esp_ble_power_type_t;
/**
* @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm).
*/
typedef enum {
ESP_PWR_LVL_N27 = 0, /*!< Corresponding to -27dbm */
ESP_PWR_LVL_N24 = 1, /*!< Corresponding to -24dbm */
ESP_PWR_LVL_N21 = 2, /*!< Corresponding to -21dbm */
ESP_PWR_LVL_N18 = 3, /*!< Corresponding to -18dbm */
ESP_PWR_LVL_N15 = 4, /*!< Corresponding to -15dbm */
ESP_PWR_LVL_N12 = 5, /*!< Corresponding to -12dbm */
ESP_PWR_LVL_N9 = 6, /*!< Corresponding to -9dbm */
ESP_PWR_LVL_N6 = 7, /*!< Corresponding to -6dbm */
ESP_PWR_LVL_N3 = 8, /*!< Corresponding to -3dbm */
ESP_PWR_LVL_N0 = 9, /*!< Corresponding to 0dbm */
ESP_PWR_LVL_P3 = 10, /*!< Corresponding to +3dbm */
ESP_PWR_LVL_P6 = 11, /*!< Corresponding to +6dbm */
ESP_PWR_LVL_P9 = 12, /*!< Corresponding to +9dbm */
ESP_PWR_LVL_P12 = 13, /*!< Corresponding to +12dbm */
ESP_PWR_LVL_P15 = 14, /*!< Corresponding to +15dbm */
ESP_PWR_LVL_P18 = 15, /*!< Corresponding to +18dbm */
ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */
} esp_power_level_t;
typedef struct {
uint8_t type;
uint8_t val[6];
} esp_ble_addr_t;
/**
* @brief Set BLE TX power
* Connection Tx power should only be set after connection created.
* @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc
* @param power_level: Power level(index) corresponding to absolute value(dbm)
* @return ESP_OK - success, other - failed
*/
esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level);
/**
* @brief Get BLE TX power
* Connection Tx power should only be get after connection created.
* @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc
* @return >= 0 - Power level, < 0 - Invalid
*/
esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type);
#define CONFIG_VERSION 0x20220105
#define CONFIG_MAGIC 0x5A5AA5A5
/**
* @brief Controller config options, depend on config mask.
* Config mask indicate which functions enabled, this means
* some options or parameters of some functions enabled by config mask.
*/
struct esp_bt_controller_config_t{
uint32_t config_version;
uint16_t ble_ll_resolv_list_size;
uint16_t ble_hci_evt_hi_buf_count;
uint16_t ble_hci_evt_lo_buf_count;
uint8_t ble_ll_sync_list_cnt;
uint8_t ble_ll_sync_cnt;
uint16_t ble_ll_rsp_dup_list_count;
uint16_t ble_ll_adv_dup_list_count;
uint8_t ble_ll_tx_pwr_dbm;
uint64_t rtc_freq;
uint16_t ble_ll_sca;
uint8_t ble_ll_scan_phy_number;
uint16_t ble_ll_conn_def_auth_pyld_tmo;
uint8_t ble_ll_jitter_usecs;
uint16_t ble_ll_sched_max_adv_pdu_usecs;
uint16_t ble_ll_sched_direct_adv_max_usecs;
uint16_t ble_ll_sched_adv_max_usecs;
uint16_t ble_scan_rsp_data_max_len;
uint8_t ble_ll_cfg_num_hci_cmd_pkts;
uint32_t ble_ll_ctrl_proc_timeout_ms;
uint16_t nimble_max_connections;
uint8_t ble_whitelist_size;
uint16_t ble_acl_buf_size;
uint16_t ble_acl_buf_count;
uint16_t ble_hci_evt_buf_size;
uint16_t ble_multi_adv_instances;
uint16_t ble_ext_adv_max_size;
uint16_t controller_task_stack_size;
uint8_t controller_task_prio;
uint8_t controller_run_cpu;
uint8_t enable_qa_test;
uint8_t enable_bqb_test;
uint8_t enable_uart_hci;
uint8_t ble_hci_uart_port;
uint32_t ble_hci_uart_baud;
uint8_t ble_hci_uart_data_bits;
uint8_t ble_hci_uart_stop_bits;
uint8_t ble_hci_uart_flow_ctrl;
uint8_t ble_hci_uart_uart_parity;
uint8_t enable_tx_cca;
uint8_t cca_rssi_thresh;
uint8_t sleep_en;
uint8_t coex_phy_coded_tx_rx_time_limit;
uint8_t dis_scan_backoff;
uint8_t esp_scan_filter_en;
uint32_t config_magic;
};
typedef struct esp_bt_controller_config_t esp_bt_controller_config_t;
#define RUN_BQB_TEST 0
#define RUN_QA_TEST 0
#define NIMBLE_DISABLE_SCAN_BACKOFF 0
#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART
#define HCI_UART_EN CONFIG_BT_LE_HCI_INTERFACE_USE_UART
#else
#define HCI_UART_EN 0 // hci ram mode
#endif
#if CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY
#define BLE_LL_SCAN_PHY_NUMBER_N (2)
#else
#define BLE_LL_SCAN_PHY_NUMBER_N (1)
#endif
#ifdef CONFIG_BT_NIMBLE_SLEEP_ENABLE
#define NIMBLE_SLEEP_ENABLE CONFIG_BT_NIMBLE_SLEEP_ENABLE
#else
#define NIMBLE_SLEEP_ENABLE 0
#endif
#if CONFIG_BT_NIMBLE_ENABLED
#define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST MYNEWT_VAL(BLE_MAX_PERIODIC_ADVERTISER_LIST)
#define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS MYNEWT_VAL(BLE_MAX_PERIODIC_SYNCS)
#define DEFAULT_BT_LE_MAX_CONNECTIONS MYNEWT_VAL(BLE_MAX_CONNECTIONS)
#define DEFAULT_BT_LE_ACL_BUF_SIZE MYNEWT_VAL(BLE_ACL_BUF_SIZE)
#define DEFAULT_BT_LE_ACL_BUF_COUNT MYNEWT_VAL(BLE_ACL_BUF_COUNT)
#define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE MYNEWT_VAL(BLE_HCI_EVT_BUF_SIZE)
#define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE MYNEWT_VAL(BLE_EXT_ADV_MAX_SIZE)
#define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES MYNEWT_VAL(BLE_MULTI_ADV_INSTANCES)
#define DEFAULT_BT_NIMBLE_WHITELIST_SIZE MYNEWT_VAL(BLE_LL_WHITELIST_SIZE)
#define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT MYNEWT_VAL(BLE_HCI_EVT_HI_BUF_COUNT)
#define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT MYNEWT_VAL(BLE_HCI_EVT_LO_BUF_COUNT)
#define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_EFF
#else
# if defined(CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST)
#define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST)
#else
#define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (0)
#endif
#if defined(CONFIG_BT_LE_MAX_PERIODIC_SYNCS)
#define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (CONFIG_BT_LE_MAX_PERIODIC_SYNCS)
#else
#define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (0)
#endif
#if defined(CONFIG_BT_LE_MAX_CONNECTIONS)
#define DEFAULT_BT_LE_MAX_CONNECTIONS (CONFIG_BT_LE_MAX_CONNECTIONS)
#else
#define DEFAULT_BT_LE_MAX_CONNECTIONS (0)
#endif
#if defined(CONFIG_BT_LE_ACL_BUF_SIZE)
#define DEFAULT_BT_LE_ACL_BUF_SIZE (CONFIG_BT_LE_ACL_BUF_SIZE)
#else
#define DEFAULT_BT_LE_ACL_BUF_SIZE (0)
#endif
#if defined(CONFIG_BT_LE_ACL_BUF_COUNT)
#define DEFAULT_BT_LE_ACL_BUF_COUNT (CONFIG_BT_LE_ACL_BUF_COUNT)
#else
#define DEFAULT_BT_LE_ACL_BUF_COUNT (0)
#endif
#if defined(CONFIG_BT_LE_HCI_EVT_BUF_SIZE)
#define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (CONFIG_BT_LE_HCI_EVT_BUF_SIZE)
#else
#define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (0)
#endif
#if defined(CONFIG_BT_LE_EXT_ADV_MAX_SIZE)
#define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (CONFIG_BT_LE_EXT_ADV_MAX_SIZE)
#else
#define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (0)
#endif
#if defined(CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES)
#define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES)
#else
#define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (0)
#endif
#if defined(CONFIG_BT_LE_WHITELIST_SIZE)
#define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (CONFIG_BT_LE_WHITELIST_SIZE)
#else
#define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (0)
#endif
#if defined(CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT)
#define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT)
#else
#define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (0)
#endif
#if defined(CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT)
#define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT)
#else
#define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (0)
#endif
#define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF
#endif
#ifdef BT_LE_HCI_INTERFACE_USE_UART
#define DEFAULT_BT_LE_HCI_UART_TX_PIN (CONFIG_BT_LE_HCI_UART_TX_PIN)
#define DEFAULT_BT_LE_HCI_UART_RX_PIN (CONFIG_BT_LE_HCI_UART_RX_PIN)
#define DEFAULT_BT_LE_HCI_UART_PORT (CONFIG_BT_LE_HCI_UART_PORT)
#define DEFAULT_BT_LE_HCI_UART_BAUD (CONFIG_BT_LE_HCI_UART_BAUD)
#define DEFAULT_BT_LE_HCI_UART_DATA_BITS (CONFIG_BT_LE_HCI_UART_DATA_BITS)
#define DEFAULT_BT_LE_HCI_UART_STOP_BITS (CONFIG_BT_LE_HCI_UART_STOP_BITS)
#define DEFAULT_BT_LE_HCI_UART_PARITY (CONFIG_BT_LE_HCI_UART_BAUD)
#define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (CONFIG_BT_LE_HCI_UART_TASK_STACK_SIZE)
#define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (CONFIG_BT_LE_HCI_UART_FLOW_CTRL)
#else
#define DEFAULT_BT_LE_HCI_UART_TX_PIN (0)
#define DEFAULT_BT_LE_HCI_UART_RX_PIN (0)
#define DEFAULT_BT_LE_HCI_UART_PORT (0)
#define DEFAULT_BT_LE_HCI_UART_BAUD (0)
#define DEFAULT_BT_LE_HCI_UART_DATA_BITS (8)
#define DEFAULT_BT_LE_HCI_UART_STOP_BITS (1)
#define DEFAULT_BT_LE_HCI_UART_PARITY (0)
#define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (0)
#define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0)
#endif
#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \
.config_version = CONFIG_VERSION, \
.ble_ll_resolv_list_size = CONFIG_BT_LE_LL_RESOLV_LIST_SIZE, \
.ble_hci_evt_hi_buf_count = DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT, \
.ble_hci_evt_lo_buf_count = DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT, \
.ble_ll_sync_list_cnt = DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST, \
.ble_ll_sync_cnt = DEFAULT_BT_LE_MAX_PERIODIC_SYNCS, \
.ble_ll_rsp_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \
.ble_ll_adv_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \
.ble_ll_tx_pwr_dbm = BLE_LL_TX_PWR_DBM_N, \
.rtc_freq = RTC_FREQ_N, \
.ble_ll_sca = CONFIG_BT_LE_LL_SCA, \
.ble_ll_scan_phy_number = BLE_LL_SCAN_PHY_NUMBER_N, \
.ble_ll_conn_def_auth_pyld_tmo = BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N, \
.ble_ll_jitter_usecs = BLE_LL_JITTER_USECS_N, \
.ble_ll_sched_max_adv_pdu_usecs = BLE_LL_SCHED_MAX_ADV_PDU_USECS_N, \
.ble_ll_sched_direct_adv_max_usecs = BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N, \
.ble_ll_sched_adv_max_usecs = BLE_LL_SCHED_ADV_MAX_USECS_N, \
.ble_scan_rsp_data_max_len = BLE_SCAN_RSP_DATA_MAX_LEN_N, \
.ble_ll_cfg_num_hci_cmd_pkts = BLE_LL_CFG_NUM_HCI_CMD_PKTS_N, \
.ble_ll_ctrl_proc_timeout_ms = BLE_LL_CTRL_PROC_TIMEOUT_MS_N, \
.nimble_max_connections = DEFAULT_BT_LE_MAX_CONNECTIONS, \
.ble_whitelist_size = DEFAULT_BT_NIMBLE_WHITELIST_SIZE, \
.ble_acl_buf_size = DEFAULT_BT_LE_ACL_BUF_SIZE, \
.ble_acl_buf_count = DEFAULT_BT_LE_ACL_BUF_COUNT, \
.ble_hci_evt_buf_size = DEFAULT_BT_LE_HCI_EVT_BUF_SIZE, \
.ble_multi_adv_instances = DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES, \
.ble_ext_adv_max_size = DEFAULT_BT_LE_EXT_ADV_MAX_SIZE, \
.controller_task_stack_size = NIMBLE_LL_STACK_SIZE, \
.controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \
.controller_run_cpu = 0, \
.enable_qa_test = RUN_QA_TEST, \
.enable_bqb_test = RUN_BQB_TEST, \
.enable_uart_hci = HCI_UART_EN, \
.ble_hci_uart_port = DEFAULT_BT_LE_HCI_UART_PORT, \
.ble_hci_uart_baud = DEFAULT_BT_LE_HCI_UART_BAUD, \
.ble_hci_uart_data_bits = DEFAULT_BT_LE_HCI_UART_DATA_BITS, \
.ble_hci_uart_stop_bits = DEFAULT_BT_LE_HCI_UART_STOP_BITS, \
.ble_hci_uart_flow_ctrl = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL, \
.ble_hci_uart_uart_parity = DEFAULT_BT_LE_HCI_UART_PARITY, \
.enable_tx_cca = MYNEWT_VAL(BLE_TX_CCA_ENABLED), \
.cca_rssi_thresh = 256 - MYNEWT_VAL(BLE_CCA_RSSI_THRESH), \
.sleep_en = NIMBLE_SLEEP_ENABLE, \
.coex_phy_coded_tx_rx_time_limit = DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF, \
.dis_scan_backoff = NIMBLE_DISABLE_SCAN_BACKOFF, \
.esp_scan_filter_en = 0, \
.config_magic = CONFIG_MAGIC, \
};
esp_err_t esp_bt_controller_init(struct esp_bt_controller_config_t *cfg);
/**
* @brief Get BT controller is initialised/de-initialised/enabled/disabled
* @return status value
*/
esp_bt_controller_status_t esp_bt_controller_get_status(void);
esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type);
esp_err_t esp_bt_controller_deinit(void);
esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode);
esp_err_t esp_bt_controller_disable(void);
typedef struct esp_vhci_host_callback {
void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */
int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/
} esp_vhci_host_callback_t;
/** @brief esp_vhci_host_check_send_available
* used for check actively if the host can send packet to controller or not.
* @return true for ready to send, false means cannot send packet
*/
bool esp_vhci_host_check_send_available(void);
/** @brief esp_vhci_host_send_packet
* host send packet to controller
*
* Should not call this function from within a critical section
* or when the scheduler is suspended.
*
* @param data the packet point
* @param len the packet length
*/
void esp_vhci_host_send_packet(uint8_t *data, uint16_t len);
/** @brief esp_vhci_host_register_callback
* register the vhci reference callback
* struct defined by vhci_host_callback structure.
* @param callback esp_vhci_host_callback type variable
* @return ESP_OK - success, ESP_FAIL - failed
*/
esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback);
/** @brief esp_bt_controller_mem_release
* release the controller memory as per the mode
*
* This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes.
*
* esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init()
* or after esp_bt_controller_deinit().
*
* Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth
* mode which you have released by this function.
*
* If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled)
* then do not call this function.
*
* If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call
* esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory.
*
* If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead,
* which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data
* consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of
* esp_bt_mem_release() function
*
* @param mode : the mode want to release memory
* @return ESP_OK - success, other - failed
*/
esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode);
/** @brief esp_bt_mem_release
* release controller memory and BSS and data section of the BT/BLE host stack as per the mode
*
* This function first releases controller memory by internally calling esp_bt_controller_mem_release().
* Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap
*
* Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth
* mode which you have released by this function.
*
* If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled)
* then do not call this function.
*
* If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM)
* before esp_bt_controller_init or after esp_bt_controller_deinit.
*
* For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation".
* In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory.
* Below is the sequence of APIs to be called for such scenarios:
*
* esp_bluedroid_disable();
* esp_bluedroid_deinit();
* esp_bt_controller_disable();
* esp_bt_controller_deinit();
* esp_bt_mem_release(ESP_BT_MODE_BTDM);
*
* @param mode : the mode whose memory is to be released
* @return ESP_OK - success, other - failed
*/
esp_err_t esp_bt_mem_release(esp_bt_mode_t mode);
/* Returns random static address or -1 if not present */
extern int esp_ble_hw_get_static_addr(esp_ble_addr_t *addr);
#ifdef __cplusplus
}
#endif
#endif /* __ESP_BT_H__ */

0
components/bt/sdkconfig.rename.esp32c2 100644
Wyświetl plik