esp-idf/Kconfig

353 wiersze
15 KiB
Plaintext
Czysty Zwykły widok Historia

2016-08-17 15:08:22 +00:00
#
# For a description of the syntax of this configuration file,
# see kconfig/kconfig-language.txt.
#
mainmenu "Espressif IoT Development Framework Configuration"
2016-08-17 15:08:22 +00:00
2018-12-06 14:08:18 +00:00
config IDF_CMAKE
bool
option env="IDF_CMAKE"
2019-11-28 13:08:20 +00:00
config IDF_ENV_FPGA
# This option is for internal use only
bool
2018-12-06 14:08:18 +00:00
config IDF_TARGET
# This option records the IDF target when sdkconfig is generated the first time.
# It is not updated if environment variable $IDF_TARGET changes later, and
# the build system is responsible for detecting the mismatch between
# CONFIG_IDF_TARGET and $IDF_TARGET.
string
default "$IDF_TARGET"
2018-12-06 14:08:18 +00:00
2019-04-03 09:08:02 +00:00
config IDF_TARGET_ESP32
bool
2019-04-08 10:02:05 +00:00
default "y" if IDF_TARGET="esp32"
2019-04-03 09:08:02 +00:00
2020-01-17 03:47:08 +00:00
config IDF_TARGET_ESP32S2
2019-04-03 09:08:02 +00:00
bool
2020-01-17 03:47:08 +00:00
default "y" if IDF_TARGET="esp32s2"
select FREERTOS_UNICORE
2018-12-06 14:08:18 +00:00
config IDF_FIRMWARE_CHIP_ID
hex
default 0x0000 if IDF_TARGET_ESP32
2020-01-17 03:47:08 +00:00
default 0x0002 if IDF_TARGET_ESP32S2
default 0xFFFF
2018-12-06 14:08:18 +00:00
menu "SDK tool configuration"
config SDK_TOOLPREFIX
2018-12-06 14:08:18 +00:00
string "Compiler toolchain path/prefix"
2019-04-03 11:43:37 +00:00
default "xtensa-esp32-elf-" if IDF_TARGET_ESP32
2020-01-17 03:47:08 +00:00
default "xtensa-esp32s2-elf-" if IDF_TARGET_ESP32S2
2018-12-06 14:08:18 +00:00
help
The prefix/path that is used to call the toolchain. The default setting assumes
a crosstool-ng gcc setup that is in your PATH.
config SDK_PYTHON
2018-12-06 14:08:18 +00:00
string "Python 2 interpreter"
depends on !IDF_CMAKE
default "python"
help
The executable name/path that is used to run python. On some systems Python 2.x
may need to be invoked as python2.
(Note: This option is used with the legacy GNU Make build system only.)
2018-12-06 14:08:18 +00:00
config SDK_MAKE_WARN_UNDEFINED_VARIABLES
2018-12-06 14:08:18 +00:00
bool "'make' warns on undefined variables"
depends on !IDF_CMAKE
2018-12-06 14:08:18 +00:00
default "y"
help
Adds --warn-undefined-variables to MAKEFLAGS. This causes make to
print a warning any time an undefined variable is referenced.
This option helps find places where a variable reference is misspelled
or otherwise missing, but it can be unwanted if you have Makefiles which
depend on undefined variables expanding to an empty string.
(Note: this option is used with the legacy GNU Make build system only.)
config SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS
bool "Toolchain supports time_t wide 64-bits"
default n
help
Enable this option in case you have a custom toolchain which supports time_t wide 64-bits.
This option checks time_t is 64-bits and disables ROM time functions
to use the time functions from the toolchain instead.
This option allows resolving the Y2K38 problem.
See "Setup Linux Toolchain from Scratch" to build
a custom toolchain which supports 64-bits time_t.
Note: ESP-IDF does not currently come with any pre-compiled toolchain
that supports 64-bit wide time_t.
This will change in a future major release,
but currently 64-bit time_t requires a custom built toolchain.
2018-12-06 14:08:18 +00:00
endmenu # SDK tool configuration
2019-07-22 14:04:03 +00:00
menu "Build type"
choice APP_BUILD_TYPE
prompt "Application build type"
default APP_BUILD_TYPE_APP_2NDBOOT
help
Select the way the application is built.
By default, the application is built as a binary file in a format compatible with
the ESP32 bootloader. In addition to this application, 2nd stage bootloader is
also built. Application and bootloader binaries can be written into flash and
loaded/executed from there.
Another option, useful for only very small and limited applications, is to only link
the .elf file of the application, such that it can be loaded directly into RAM over
JTAG. Note that since IRAM and DRAM sizes are very limited, it is not possible to
build any complex application this way. However for kinds of testing and debugging,
this option may provide faster iterations, since the application does not need to be
written into flash.
Note that at the moment, ESP-IDF does not contain all the startup code required to
initialize the CPUs and ROM memory (data/bss). Therefore it is necessary to execute
a bit of ROM code prior to executing the application. A gdbinit file may look as follows:
# Connect to a running instance of OpenOCD
target remote :3333
# Reset and halt the target
mon reset halt
# Run to a specific point in ROM code,
# where most of initialization is complete.
thb *0x40007901
c
# Load the application into RAM
load
# Run till app_main
tb app_main
c
Execute this gdbinit file as follows:
xtensa-esp32-elf-gdb build/app-name.elf -x gdbinit
Recommended sdkconfig.defaults for building loadable ELF files is as follows.
CONFIG_APP_BUILD_TYPE_ELF_RAM is required, other options help reduce application
memory footprint.
CONFIG_APP_BUILD_TYPE_ELF_RAM=y
CONFIG_VFS_SUPPORT_TERMIOS=
CONFIG_NEWLIB_NANO_FORMAT=y
CONFIG_ESP32_PANIC_PRINT_HALT=y
CONFIG_ESP32_DEBUG_STUBS_ENABLE=
CONFIG_ESP_ERR_TO_NAME_LOOKUP=
config APP_BUILD_TYPE_APP_2NDBOOT
bool
prompt "Default (binary application + 2nd stage bootloader)"
select APP_BUILD_GENERATE_BINARIES
select APP_BUILD_BOOTLOADER
select APP_BUILD_USE_FLASH_SECTIONS
config APP_BUILD_TYPE_ELF_RAM
bool
prompt "ELF file, loadable into RAM (EXPERIMENTAL))"
endchoice # APP_BUILD_TYPE
# Hidden options, set according to the choice above
config APP_BUILD_GENERATE_BINARIES
bool # Whether to generate .bin files or not
config APP_BUILD_BOOTLOADER
bool # Whether to build the bootloader
config APP_BUILD_USE_FLASH_SECTIONS
bool # Whether to place code/data into memory-mapped flash sections
endmenu # Build type
source "$COMPONENT_KCONFIGS_PROJBUILD_SOURCE_FILE"
2018-12-06 14:08:18 +00:00
menu "Compiler options"
2019-04-24 13:02:25 +00:00
choice COMPILER_OPTIMIZATION
2018-12-06 14:08:18 +00:00
prompt "Optimization Level"
default COMPILER_OPTIMIZATION_DEFAULT
2018-12-06 14:08:18 +00:00
help
This option sets compiler optimization level (gcc -O argument).
- The "Default" setting will add the -0g flag to CFLAGS.
- The "Size" setting will add the -0s flag to CFLAGS.
- The "Performance" setting will add the -O2 flag to CFLAGS.
- The "None" setting will add the -O0 flag to CFLAGS.
2018-12-06 14:08:18 +00:00
The "Size" setting cause the compiled code to be smaller and faster, but
may lead to difficulties of correlating code addresses to source file
lines when debugging.
2018-12-06 14:08:18 +00:00
The "Performance" setting causes the compiled code to be larger and faster,
but will be easier to correlated code addresses to source file lines.
2018-12-06 14:08:18 +00:00
"None" with -O0 produces compiled code without optimization.
2018-12-06 14:08:18 +00:00
Note that custom optimization levels may be unsupported.
config COMPILER_OPTIMIZATION_DEFAULT
2018-12-06 14:08:18 +00:00
bool "Debug (-Og)"
config COMPILER_OPTIMIZATION_SIZE
bool "Optimize for size (-Os)"
config COMPILER_OPTIMIZATION_PERF
bool "Optimize for performance (-O2)"
config COMPILER_OPTIMIZATION_NONE
bool "Debug without optimization (-O0)"
2018-12-06 14:08:18 +00:00
endchoice
2019-04-24 13:02:25 +00:00
choice COMPILER_OPTIMIZATION_ASSERTION_LEVEL
2018-12-06 14:08:18 +00:00
prompt "Assertion level"
2019-04-24 13:02:25 +00:00
default COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE
2018-12-06 14:08:18 +00:00
help
Assertions can be:
- Enabled. Failure will print verbose assertion details. This is the default.
- Set to "silent" to save code size (failed assertions will abort() but user
needs to use the aborting address to find the line number with the failed assertion.)
- Disabled entirely (not recommended for most configurations.) -DNDEBUG is added
to CPPFLAGS in this case.
2019-04-24 13:02:25 +00:00
config COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE
2018-12-06 14:08:18 +00:00
prompt "Enabled"
bool
help
Enable assertions. Assertion content and line number will be printed on failure.
2019-04-24 13:02:25 +00:00
config COMPILER_OPTIMIZATION_ASSERTIONS_SILENT
2018-12-06 14:08:18 +00:00
prompt "Silent (saves code size)"
bool
help
Enable silent assertions. Failed assertions will abort(), user needs to
use the aborting address to find the line number with the failed assertion.
2019-04-24 13:02:25 +00:00
config COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE
2018-12-06 14:08:18 +00:00
prompt "Disabled (sets -DNDEBUG)"
bool
help
If assertions are disabled, -DNDEBUG is added to CPPFLAGS.
endchoice # assertions
2019-04-24 13:02:25 +00:00
menuconfig COMPILER_CXX_EXCEPTIONS
2018-12-06 14:08:18 +00:00
bool "Enable C++ exceptions"
default n
help
Enabling this option compiles all IDF C++ files with exception support enabled.
Disabling this option disables C++ exception support in all compiled files, and any libstdc++ code
which throws an exception will abort instead.
Enabling this option currently adds an additional ~500 bytes of heap overhead
when an exception is thrown in user code for the first time.
2019-04-24 13:02:25 +00:00
config COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE
2018-12-06 14:08:18 +00:00
int "Emergency Pool Size"
default 0
2019-04-24 13:02:25 +00:00
depends on COMPILER_CXX_EXCEPTIONS
2018-12-06 14:08:18 +00:00
help
Size (in bytes) of the emergency memory pool for C++ exceptions. This pool will be used to allocate
memory for thrown exceptions when there is not enough memory on the heap.
config COMPILER_CXX_RTTI
bool "Enable C++ run-time type info (RTTI)"
default n
help
Enabling this option compiles all C++ files with RTTI support enabled.
This increases binary size (typically by tens of kB) but allows using
dynamic_cast conversion and typeid operator.
2019-04-24 13:02:25 +00:00
choice COMPILER_STACK_CHECK_MODE
2018-12-06 14:08:18 +00:00
prompt "Stack smashing protection mode"
2019-04-24 13:02:25 +00:00
default COMPILER_STACK_CHECK_MODE_NONE
2018-12-06 14:08:18 +00:00
help
Stack smashing protection mode. Emit extra code to check for buffer overflows, such as stack
smashing attacks. This is done by adding a guard variable to functions with vulnerable objects.
The guards are initialized when a function is entered and then checked when the function exits.
If a guard check fails, program is halted. Protection has the following modes:
- In NORMAL mode (GCC flag: -fstack-protector) only functions that call alloca, and functions with
buffers larger than 8 bytes are protected.
- STRONG mode (GCC flag: -fstack-protector-strong) is like NORMAL, but includes additional functions
to be protected -- those that have local array definitions, or have references to local frame
addresses.
- In OVERALL mode (GCC flag: -fstack-protector-all) all functions are protected.
Modes have the following impact on code performance and coverage:
- performance: NORMAL > STRONG > OVERALL
- coverage: NORMAL < STRONG < OVERALL
2019-04-24 13:02:25 +00:00
config COMPILER_STACK_CHECK_MODE_NONE
2018-12-06 14:08:18 +00:00
bool "None"
2019-04-24 13:02:25 +00:00
config COMPILER_STACK_CHECK_MODE_NORM
2018-12-06 14:08:18 +00:00
bool "Normal"
2019-04-24 13:02:25 +00:00
config COMPILER_STACK_CHECK_MODE_STRONG
2018-12-06 14:08:18 +00:00
bool "Strong"
2019-04-24 13:02:25 +00:00
config COMPILER_STACK_CHECK_MODE_ALL
2018-12-06 14:08:18 +00:00
bool "Overall"
endchoice
2019-04-24 13:02:25 +00:00
config COMPILER_STACK_CHECK
2018-12-06 14:08:18 +00:00
bool
2019-04-24 13:02:25 +00:00
default !COMPILER_STACK_CHECK_MODE_NONE
2018-12-06 14:08:18 +00:00
help
Stack smashing protection.
2019-04-24 13:02:25 +00:00
config COMPILER_WARN_WRITE_STRINGS
2018-12-06 14:08:18 +00:00
bool "Enable -Wwrite-strings warning flag"
default "n"
help
Adds -Wwrite-strings flag for the C/C++ compilers.
For C, this gives string constants the type ``const char[]`` so that
copying the address of one into a non-const ``char *`` pointer
produces a warning. This warning helps to find at compile time code
that tries to write into a string constant.
For C++, this warns about the deprecated conversion from string
literals to ``char *``.
2019-04-24 13:02:25 +00:00
config COMPILER_DISABLE_GCC8_WARNINGS
2018-12-06 14:08:18 +00:00
bool "Disable new warnings introduced in GCC 6 - 8"
default "n"
help
Enable this option if using GCC 6 or newer, and wanting to disable warnings which don't appear with
GCC 5.
endmenu # Compiler Options
menu "Component config"
source "$COMPONENT_KCONFIGS_SOURCE_FILE"
2018-12-06 14:08:18 +00:00
endmenu
global: move the soc component out of the common list This MR removes the common dependency from every IDF components to the SOC component. Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components. But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components. In CMAKE, we have two kinds of header visibilities (set by include path visibility): (Assume component A --(depends on)--> B, B is the current component) 1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B) 2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only) and we have two kinds of depending ways: (Assume component A --(depends on)--> B --(depends on)--> C, B is the current component) 1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B) 2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B) 1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default. 2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it. 3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers 4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link) This is a breaking change. Previous code may depends on the long include chain. You may need to include the following headers for some files after this commit: - soc/soc.h - soc/soc_memory_layout.h - driver/gpio.h - esp_sleep.h The major broken include chain includes: 1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h. 2. ets_sys.h no longer includes soc/soc.h 3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h BREAKING CHANGE
2019-04-03 05:17:38 +00:00
menu "Compatibility options"
config LEGACY_INCLUDE_COMMON_HEADERS
2019-11-28 13:08:20 +00:00
bool "Include headers across components as before IDF v4.0"
global: move the soc component out of the common list This MR removes the common dependency from every IDF components to the SOC component. Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components. But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components. In CMAKE, we have two kinds of header visibilities (set by include path visibility): (Assume component A --(depends on)--> B, B is the current component) 1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B) 2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only) and we have two kinds of depending ways: (Assume component A --(depends on)--> B --(depends on)--> C, B is the current component) 1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B) 2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B) 1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default. 2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it. 3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers 4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link) This is a breaking change. Previous code may depends on the long include chain. You may need to include the following headers for some files after this commit: - soc/soc.h - soc/soc_memory_layout.h - driver/gpio.h - esp_sleep.h The major broken include chain includes: 1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h. 2. ets_sys.h no longer includes soc/soc.h 3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h BREAKING CHANGE
2019-04-03 05:17:38 +00:00
default n
help
Soc, esp32, and driver components, the most common
components. Some header of these components are included
implicitly by headers of other components before IDF v4.0.
It's not required for high-level components, but still
included through long header chain everywhere.
This is harmful to the modularity. So it's changed in IDF
v4.0.
You can still include these headers in a legacy way until it
is totally deprecated by enable this option.
2019-04-24 13:02:25 +00:00
endmenu #Compatibility options