esp-idf/examples/mesh/internal_communication/README.md

24 wiersze
978 B
Markdown
Czysty Zwykły widok Historia

# Mesh Internal Communication Example
2018-02-27 10:22:20 +00:00
This example demonstrates how to use the mesh APIs to set up a mesh network, send and receive messages over the mesh network and etc.
Features Demonstrated
- mesh initialization
- mesh configuration
- mesh start
- mesh event handler
- root send and receive
- other nodes receive
Open project configuration menu (`idf.py menuconfig`) to configure the mesh network channel, router SSID, router password and mesh softAP settings.
2018-02-27 10:22:20 +00:00
When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are.
The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5.
Root continuously sends an On / Off control message to all devices in its routing table. Devices including root itself receive this message and do the On / Off.