kopia lustrzana https://github.com/jamescoxon/dl-fldigi
6fcf11ddde
* New configuration panel 'IO'
* Add power density zones.
* Query and Set Kiss hardware commands
* Support bcast rsid over kiss socket
* limit selectable modem options to 8 bit versions only (kiss i/o mode)
* Employs simple HDLC encapsulation frame for transmit/receive CRC data
verification.
* Uses histogram based threshold detection.
* Include manual squelch button for KISS op's.
* User configurable inhibit transmit on busy frequencies for nn seconds
* Impose transmit wait on valid frame reception
* Uses dual UDP ports for concurrent operation of programs using the
same IP address.
* Clears the transmit buffer when data is available for more then 10
mins and has not been transmitted.
* Provides ax25 decoding. Code hijacked from the FLDIGI packet modem co
- redirect character data display on the RX panel
* Add non standard KISS frame to handle ARQ data.
- interface can handle both ARQ data and HDLC ax25 frames on
the same port.
* Squelch related command and control functions to the KISS hardware
interface.
* User configuration item to disable CSMA from config panel and kiss
hardware frame.
* Additional KISS command to adjust KPSQL detection gain (for testing).
* Removed unused function in sockets.cxx not compatible with LINUX OS.
(from John, G8BPQ)
* New command 'BUSY:<T|F>'
* Custom bindUDP() for UDP support.
* Waterfall display gain adjusted based on sample rate changes.
* Expanded conditions that indicate BUSY:T on command request.
* Log loopback condition to event log.
* Restore KPQSL set level position on start up.
* Conditionally log of the KISS data path strings
* Added debug filter 'KISS control' to event log.
* KPSQL threshold button indicator remains ON during transmit inhibit.
indication of active 'Busy Channel'.
* Added DEBUG Logging command LOG_HEX(const char *buf, int len);
D:,... ReadFromHostSocket: ..BUSY:. C0 06 42 55 53 59 3A C0
* Added thread locks to waterfall.cxx:
- powerDensity()
- peakFreq(),
- powerDensityMaximum()
These are being accessed by more then one thread.
* Swapped hash.m4 swapped test case to std::tr1::hash from std::hash
- Updated pskrep.cxx to handle the change in hash.m4
* 8PSK2000 removed.
* Coordination merge with branch kiss21.
* Code clean up
* Updated Documentation. Remove unused png's.
* Request from Jim, W2XO: Add log.set_rst_in and log.set_rst_out xmlrpc
commands.
* Compiler warning pacification (global in scope).
* New XMLRPC commands to query and set active IO port.
* Documentation update for XMLRPC commands
* WSAStartup and WSACleanup one for one issue.
* Update Docs for 3.22 release. New png's added.
|
||
|---|---|---|
| .. | ||
| blank.cxx | ||
| blank.h | ||