diff --git a/README.md b/README.md
index 1fd24e1..809cf1d 100644
--- a/README.md
+++ b/README.md
@@ -4,9 +4,8 @@
# Analog-to-Digital Converter (ADC) - Temperature Measurement Using AVR128DA48 Microcontroller
-## Objective
-
In this application, the ADC will be used to measure the temperature using the on-board specific sensor, and the results will be transmitted through Universal Synchronous/Asynchronous Receiver/Transmitter (USART). The software's example code diagram is presented in the figure below.
+
## Related Documentation
@@ -35,8 +34,7 @@ To program the Curiosity Nano board with this MPLAB X project, follow the steps
## Setup
The AVR128DA48 Curiosity Nano Development Board is used as the test platform. The internal temperature sensor is used for measurements as input of the ADC.
-
-
The following configurations must be made:
+
The following pin configuration must be made for this project:
|Pin | Configuration |
| :----------: | :----------------: |
@@ -48,7 +46,7 @@ After alternatively cooling and warming up the microcontroller, the converted se
-**Note:** The plotted variable called ```ADC_value``` must be configured as ```int16``` type.
+**Note:** The plotted variable called ```ADC_result``` on Data Visualiser plugin must be configured as ```int16``` type.
## Summary
diff --git a/images/soft_diagram.jpg b/images/soft_diagram.jpg
deleted file mode 100644
index ae1b528..0000000
Binary files a/images/soft_diagram.jpg and /dev/null differ
diff --git a/images/soft_diagram.png b/images/soft_diagram.png
new file mode 100644
index 0000000..6f16357
Binary files /dev/null and b/images/soft_diagram.png differ