kopia lustrzana https://github.com/Xinyuan-LilyGO/TTGO-T-Display
197 wiersze
9.2 KiB
C
197 wiersze
9.2 KiB
C
// This header file contains a list of user setup files and defines which one the
|
|
// compiler uses when the IDE performs a Verify/Compile or Upload.
|
|
//
|
|
// Users can create configurations for different Espressif boards and TFT displays.
|
|
// This makes selecting between hardware setups easy by "uncommenting" one line.
|
|
|
|
// The advantage of this hardware configuration method is that the examples provided
|
|
// with the library should work with different setups immediately without any other
|
|
// changes being needed. It also improves the portability of users sketches to other
|
|
// hardware configurations and compatible libraries.
|
|
//
|
|
// Create a shortcut to this file on your desktop to permit quick access for editing.
|
|
// Re-compile and upload after making and saving any changes to this file.
|
|
|
|
// Customised User_Setup files are stored in the "User_Setups" folder.
|
|
|
|
#ifndef USER_SETUP_LOADED // Lets PlatformIO users define settings in
|
|
// platformio.ini, see notes in "Tools" folder.
|
|
|
|
// Only ONE line below should be uncommented. Add extra lines and files as needed.
|
|
|
|
// #include <User_Setup.h> // Default setup is root library folder
|
|
|
|
//#include <User_Setups/Setup1_ILI9341.h> // Setup file configured for my ILI9341
|
|
//#include <User_Setups/Setup2_ST7735.h> // Setup file configured for my ST7735
|
|
//#include <User_Setups/Setup3_ILI9163.h> // Setup file configured for my ILI9163
|
|
//#include <User_Setups/Setup4_S6D02A1.h> // Setup file configured for my S6D02A1
|
|
//#include <User_Setups/Setup5_RPi_ILI9486.h> // Setup file configured for my stock RPi TFT
|
|
//#include <User_Setups/Setup6_RPi_Wr_ILI9486.h> // Setup file configured for my modified RPi TFT
|
|
//#include <User_Setups/Setup7_ST7735_128x128.h> // Setup file configured for my ST7735 128x128 display
|
|
//#include <User_Setups/Setup8_ILI9163_128x128.h> // Setup file configured for my ILI9163 128x128 display
|
|
//#include <User_Setups/Setup9_ST7735_Overlap.h> // Setup file configured for my ST7735
|
|
//#include <User_Setups/Setup10_RPi_touch_ILI9486.h> // Setup file configured for ESP8266 and RPi TFT with touch
|
|
|
|
//#include <User_Setups/Setup11_RPi_touch_ILI9486.h> // Setup file configured for ESP32 and RPi TFT with touch
|
|
//#include <User_Setups/Setup12_M5Stack.h> // Setup file for the ESP32 based M5Stack
|
|
//#include <User_Setups/Setup13_ILI9481_Parallel.h> // Setup file for the ESP32 with parallel bus TFT
|
|
//#include <User_Setups/Setup14_ILI9341_Parallel.h> // Setup file for the ESP32 with parallel bus TFT
|
|
//#include <User_Setups/Setup15_HX8357D.h> // Setup file configured for HX8357D (untested)
|
|
//#include <User_Setups/Setup16_ILI9488_Parallel.h> // Setup file for the ESP32 with parallel bus TFT
|
|
//#include <User_Setups/Setup17_ePaper.h> // Setup file for any Waveshare ePaper display
|
|
//#include <User_Setups/Setup18_ST7789.h> // Setup file configured for ST7789
|
|
|
|
//#include <User_Setups/Setup19_RM68140_Parallel.h> // Setup file configured for RM68140 with parallel bus
|
|
|
|
//#include <User_Setups/Setup20_ILI9488.h> // Setup file for ESP8266 and ILI9488 SPI bus TFT
|
|
//#include <User_Setups/Setup21_ILI9488.h> // Setup file for ESP32 and ILI9488 SPI bus TFT
|
|
|
|
//#include <User_Setups/Setup22_TTGO_T4.h> // Setup file for ESP32 and TTGO T4 version 1.2
|
|
//#include <User_Setups/Setup22_TTGO_T4_v1.3.h> // Setup file for ESP32 and TTGO T4 version 1.3
|
|
//#include <User_Setups/Setup23_TTGO_TM.h> // Setup file for ESP32 and TTGO TM ST7789 SPI bus TFT
|
|
//#include <User_Setups/Setup24_ST7789.h> // Setup file configured for ST7789 240 x 240
|
|
#include <User_Setups/Setup25_TTGO_T_Display.h> // Setup file for ESP32 and TTGO T-Display ST7789V SPI bus TFT
|
|
//#include <User_Setups/Setup26_TTGO_T_Wristband.h> // Setup file for ESP32 and TTGO T-Wristband ST7735 SPI bus TFT
|
|
|
|
//#include <User_Setups/Setup27_RPi_ST7796_ESP32.h> // ESP32 RPi MHS-4.0 inch Display-B
|
|
//#include <User_Setups/Setup28_RPi_ST7796_ESP8266.h> // ESP8266 RPi MHS-4.0 inch Display-B
|
|
|
|
//#include <User_Setups/Setup29_ILI9341_STM32.h> // Setup for Nucleo board
|
|
//#include <User_Setups/Setup30_ILI9341_Parallel_STM32.h> // Setup for Nucleo board and parallel display
|
|
//#include <User_Setups/Setup31_ST7796_Parallel_STM32.h> // Setup for Nucleo board and parallel display
|
|
//#include <User_Setups/Setup32_ILI9341_STM32F103.h> // Setup for "Blue/Black Pill"
|
|
|
|
//#include <User_Setups/Setup33_RPi_ILI9486_STM32.h> // Setup for Nucleo board
|
|
|
|
//#include <User_Setups/Setup34_ILI9481_Parallel_STM32.h> // Setup for Nucleo board and parallel display
|
|
//#include <User_Setups/Setup35_ILI9341_STM32_Port_Bus.h> // Setup for STM32 port A parallel display
|
|
|
|
//#include <User_Setups/Setup36_RPi_touch_ILI9341.h> // Setup file configured for ESP32 and RPi TFT with touch
|
|
|
|
//#include <User_Setups/Setup43_ST7735.h> // Setup file configured for my ST7735S 80x160
|
|
//#include <User_Setups/Setup44_TTGO_CameraPlus.h> // Setup file for ESP32 and TTGO T-CameraPlus ST7789 SPI bus TFT 240x240
|
|
//#include <User_Setups/Setup45_TTGO_T_Watch.h> // Setup file for ESP32 and TTGO T-Watch ST7789 SPI bus TFT 240x240
|
|
|
|
//#include <User_Setups/Setup135_ST7789.h> // Setup file for ESP8266 and ST7789 135 x 240 TFT
|
|
|
|
//#include <User_Setups/SetupX_Template.h>
|
|
|
|
|
|
#endif // USER_SETUP_LOADED
|
|
|
|
|
|
|
|
/////////////////////////////////////////////////////////////////////////////////////
|
|
// //
|
|
// DON'T TINKER WITH ANY OF THE FOLLOWING LINES, THESE ADD THE TFT DRIVERS //
|
|
// AND ESP8266 PIN DEFINITONS, THEY ARE HERE FOR BODMER'S CONVENIENCE! //
|
|
// //
|
|
/////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
// Identical looking TFT displays may have a different colour ordering in the 16 bit colour
|
|
#define TFT_BGR 0 // Colour order Blue-Green-Red
|
|
#define TFT_RGB 1 // Colour order Red-Green-Blue
|
|
|
|
// Legacy setup support, RPI_DISPLAY_TYPE replaces RPI_DRIVER
|
|
#if defined (RPI_DRIVER)
|
|
#if !defined (RPI_DISPLAY_TYPE)
|
|
#define RPI_DISPLAY_TYPE
|
|
#endif
|
|
#endif
|
|
|
|
// Legacy setup support, RPI_ILI9486_DRIVER form is deprecated
|
|
// Instead define RPI_DISPLAY_TYPE and also define driver (e.g. ILI9486_DRIVER)
|
|
#if defined (RPI_ILI9486_DRIVER)
|
|
#if !defined (ILI9486_DRIVER)
|
|
#define ILI9486_DRIVER
|
|
#endif
|
|
#if !defined (RPI_DISPLAY_TYPE)
|
|
#define RPI_DISPLAY_TYPE
|
|
#endif
|
|
#endif
|
|
|
|
// Load the right driver definition - do not tinker here !
|
|
#if defined (ILI9341_DRIVER)
|
|
#include <TFT_Drivers/ILI9341_Defines.h>
|
|
#define TFT_DRIVER 0x9341
|
|
#elif defined (ST7735_DRIVER)
|
|
#include <TFT_Drivers/ST7735_Defines.h>
|
|
#define TFT_DRIVER 0x7735
|
|
#elif defined (ILI9163_DRIVER)
|
|
#include <TFT_Drivers/ILI9163_Defines.h>
|
|
#define TFT_DRIVER 0x9163
|
|
#elif defined (S6D02A1_DRIVER)
|
|
#include <TFT_Drivers/S6D02A1_Defines.h>
|
|
#define TFT_DRIVER 0x6D02
|
|
#elif defined (ST7796_DRIVER)
|
|
#include "TFT_Drivers/ST7796_Defines.h"
|
|
#define TFT_DRIVER 0x7796
|
|
#elif defined (ILI9486_DRIVER)
|
|
#include <TFT_Drivers/ILI9486_Defines.h>
|
|
#define TFT_DRIVER 0x9486
|
|
#elif defined (ILI9481_DRIVER)
|
|
#include <TFT_Drivers/ILI9481_Defines.h>
|
|
#define TFT_DRIVER 0x9481
|
|
#elif defined (ILI9488_DRIVER)
|
|
#include <TFT_Drivers/ILI9488_Defines.h>
|
|
#define TFT_DRIVER 0x9488
|
|
#elif defined (HX8357D_DRIVER)
|
|
#include "TFT_Drivers/HX8357D_Defines.h"
|
|
#define TFT_DRIVER 0x8357
|
|
#elif defined (EPD_DRIVER)
|
|
#include "TFT_Drivers/EPD_Defines.h"
|
|
#define TFT_DRIVER 0xE9D
|
|
#elif defined (ST7789_DRIVER)
|
|
#include "TFT_Drivers/ST7789_Defines.h"
|
|
#define TFT_DRIVER 0x7789
|
|
#elif defined (R61581_DRIVER)
|
|
#include "TFT_Drivers/R61581_Defines.h"
|
|
#define TFT_DRIVER 0x6158
|
|
#elif defined (ST7789_2_DRIVER)
|
|
#include "TFT_Drivers/ST7789_2_Defines.h"
|
|
#define TFT_DRIVER 0x778B
|
|
#elif defined (RM68140_DRIVER)
|
|
#include "TFT_Drivers/RM68140_Defines.h"
|
|
#define TFT_DRIVER 0x6814
|
|
#elif defined (SSD1963_480_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
#elif defined (SSD1963_800_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
#elif defined (SSD1963_800ALT_DRIVER)
|
|
#include "TFT_Drivers/SSD1963_Defines.h"
|
|
#define TFT_DRIVER 0x1963
|
|
// <<<<<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVER HERE
|
|
// XYZZY_init.h and XYZZY_rotation.h must also be added in TFT_eSPI.cpp
|
|
#elif defined (XYZZY_DRIVER)
|
|
#include "TFT_Drivers/XYZZY_Defines.h"
|
|
#define TFT_DRIVER 0x0000
|
|
#else
|
|
#define TFT_DRIVER 0x0000
|
|
#endif
|
|
|
|
|
|
// These are the pins for ESP8266 boards
|
|
// Name GPIO NodeMCU Function
|
|
#define PIN_D0 16 // GPIO16 WAKE
|
|
#define PIN_D1 5 // GPIO5 User purpose
|
|
#define PIN_D2 4 // GPIO4 User purpose
|
|
#define PIN_D3 0 // GPIO0 Low on boot means enter FLASH mode
|
|
#define PIN_D4 2 // GPIO2 TXD1 (must be high on boot to go to UART0 FLASH mode)
|
|
#define PIN_D5 14 // GPIO14 HSCLK
|
|
#define PIN_D6 12 // GPIO12 HMISO
|
|
#define PIN_D7 13 // GPIO13 HMOSI RXD2
|
|
#define PIN_D8 15 // GPIO15 HCS TXD0 (must be low on boot to enter UART0 FLASH mode)
|
|
#define PIN_D9 3 // RXD0
|
|
#define PIN_D10 1 // TXD0
|
|
|
|
#define PIN_MOSI 8 // SD1 FLASH and overlap mode
|
|
#define PIN_MISO 7 // SD0
|
|
#define PIN_SCLK 6 // CLK
|
|
#define PIN_HWCS 0 // D3
|
|
|
|
#define PIN_D11 9 // SD2
|
|
#define PIN_D12 10 // SD4
|