diff --git a/TTGO-T-Display.h.ino b/TTGO-T-Display.h.ino
deleted file mode 100644
index 6197f07..0000000
--- a/TTGO-T-Display.h.ino
+++ /dev/null
@@ -1,156 +0,0 @@
-#include <TFT_eSPI.h>
-#include <SPI.h>
-#include "WiFi.h"
-#include <Wire.h>
-#include <Button2.h>
-#include "esp_adc_cal.h"
-#include <Ticker.h>
-
-#define TFT_MOSI            19
-#define TFT_SCLK            18
-#define TFT_CS              5
-#define TFT_DC              16
-#define TFT_RST             23
-
-#define TFT_BL       14  // Dispaly backlight control pin
-#define ADC_PIN      34
-#define BUTTON_1     35
-#define BUTTON_2     0
-#define BUTTONS_MAP {BUTTON_1,BUTTON_2}
-
-TFT_eSPI tft = TFT_eSPI(135, 240); // Invoke custom library
-
-Button2 *pBtns = nullptr;
-uint8_t g_btns[] =  BUTTONS_MAP;
-char buff[512];
-int vref = 1100;
-int btnCick = false;
-Ticker tick;
-
-void showVoltage()
-{
-    static uint64_t timeStamp = 0;
-    if (millis() - timeStamp > 1000) {
-        timeStamp = millis();
-        uint16_t v = analogRead(ADC_PIN);
-        float battery_voltage = ((float)v / 4095.0) * 2.0 * 3.3 * (vref / 1000.0);
-        String voltage = "Voltage :" + String(battery_voltage) + "V";
-        tft.fillScreen(TFT_BLACK);
-        tft.setTextDatum(MC_DATUM);
-        tft.drawString(voltage,  tft.width() / 2, tft.height() / 2 );
-    }
-}
-
-void button_init()
-{
-    uint8_t args = sizeof(g_btns) / sizeof(g_btns[0]);
-    pBtns = new Button2 [args];
-    pBtns[0] = Button2(g_btns[0]);
-    pBtns[1] = Button2(g_btns[1]);
-    pBtns[0].setLongClickHandler([](Button2 & b) {
-        btnCick = false;
-        int r = digitalRead(TFT_BL);
-        tft.fillScreen(TFT_BLACK);
-        tft.setTextColor(TFT_GREEN, TFT_BLACK);
-        tft.setTextDatum(MC_DATUM);
-        tft.drawString("Press again to wake up",  tft.width() / 2, tft.height() / 2 );
-        delay(6000);
-        digitalWrite(TFT_BL, !r);
-        esp_sleep_enable_ext1_wakeup(GPIO_SEL_35, ESP_EXT1_WAKEUP_ALL_LOW);
-        esp_deep_sleep_start();
-    });
-    pBtns[0].setPressedHandler([](Button2 & b) {
-        Serial.println("Detect Voltage..");
-        btnCick = true;
-    });
-
-    pBtns[1].setPressedHandler([](Button2 & b) {
-        btnCick = false;
-        Serial.println("btn press wifi scan");
-        wifi_scan();
-    });
-}
-
-void button_loop()
-{
-    for (int i = 0; i < sizeof(g_btns) / sizeof(g_btns[0]); ++i) {
-        pBtns[i].loop();
-    }
-}
-
-void wifi_scan()
-{
-    tft.setTextColor(TFT_GREEN, TFT_BLACK);
-    tft.fillScreen(TFT_BLACK);
-    tft.setTextDatum(MC_DATUM);
-    tft.setTextSize(1);
-
-    tft.drawString("Scan Network", tft.width() / 2, tft.height() / 2);
-
-    WiFi.mode(WIFI_STA);
-    WiFi.disconnect();
-    delay(100);
-
-    int16_t n = WiFi.scanNetworks();
-    tft.fillScreen(TFT_BLACK);
-    if (n == 0) {
-        tft.drawString("no networks found", tft.width() / 2, tft.height() / 2);
-    } else {
-        tft.setTextDatum(TL_DATUM);
-        tft.setCursor(0, 0);
-        Serial.printf("Fount %d net\n", n);
-        for (int i = 0; i < n; ++i) {
-            sprintf(buff,
-                    "[%d]:%s(%d)",
-                    i + 1,
-                    WiFi.SSID(i).c_str(),
-                    WiFi.RSSI(i));
-            tft.println(buff);
-        }
-    }
-}
-
-void setup()
-{
-    Serial.begin(115200);
-    delay(1000);
-
-    tft.init();
-    tft.setRotation(0);
-    tft.fillScreen(TFT_BLACK);
-    tft.setTextSize(2);
-    tft.setTextColor(TFT_WHITE);
-    tft.setCursor(0, 0);
-    tft.setTextDatum(MC_DATUM);
-    tft.drawString("TTGO",  tft.width() / 2, tft.height() / 2 );
-    tft.setTextSize(1);
-
-    if (TFT_BL > 0) {
-        pinMode(TFT_BL, OUTPUT);
-        digitalWrite(TFT_BL, HIGH);
-    }
-
-    button_init();
-
-    esp_adc_cal_characteristics_t adc_chars;
-    esp_adc_cal_value_t val_type = esp_adc_cal_characterize((adc_unit_t)ADC_UNIT_1, (adc_atten_t)ADC1_CHANNEL_6, (adc_bits_width_t)ADC_WIDTH_BIT_12, 1100, &adc_chars);
-    //Check type of calibration value used to characterize ADC
-    if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
-        Serial.printf("eFuse Vref:%u mV", adc_chars.vref);
-        vref = adc_chars.vref;
-    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
-        Serial.printf("Two Point --> coeff_a:%umV coeff_b:%umV\n", adc_chars.coeff_a, adc_chars.coeff_b);
-    } else {
-        Serial.println("Default Vref: 1100mV");
-    }
-}
-
-
-
-void loop()
-{
-    if (btnCick) {
-        showVoltage();
-    }
-    button_loop();
-}
\ No newline at end of file