kopia lustrzana https://github.com/kk4das/SSB_Radio_Control
123 wiersze
3.3 KiB
C++
123 wiersze
3.3 KiB
C++
/* Rotary encoder handler for arduino.
|
|
*
|
|
* Revision: 2020 Dean Souleles, KK4DAS, Licensed under the GNU GPL Version 3.
|
|
* Contact: kk4das@gmail.com
|
|
* Added default pins and button handling
|
|
*
|
|
* Copyright 2011 Ben Buxton. Licenced under the GNU GPL Version 3.
|
|
* Contact: bb@cactii.net
|
|
*
|
|
*/
|
|
|
|
#include "Arduino.h"
|
|
#include "RotaryEnc.h"
|
|
|
|
/*
|
|
* The below state table has, for each state (row), the new state
|
|
* to set based on the next encoder output. From left to right in,
|
|
* the table, the encoder outputs are 00, 01, 10, 11, and the value
|
|
* in that position is the new state to set.
|
|
*/
|
|
|
|
#define R_START 0x0
|
|
|
|
#ifdef HALF_STEP
|
|
// Use the half-step state table (emits a code at 00 and 11) // nulled out to only use full step
|
|
#define R_CCW_BEGIN 0x1
|
|
#define R_CW_BEGIN 0x2
|
|
#define R_START_M 0x3
|
|
#define R_CW_BEGIN_M 0x4
|
|
#define R_CCW_BEGIN_M 0x5
|
|
const unsigned char ttable[6][4] = {
|
|
// R_START (00)
|
|
{R_START_M, R_CW_BEGIN, R_CCW_BEGIN, R_START},
|
|
// R_CCW_BEGIN
|
|
{R_START_M | DIR_CCW, R_START, R_CCW_BEGIN, R_START},
|
|
// R_CW_BEGIN
|
|
{R_START_M | DIR_CW, R_CW_BEGIN, R_START, R_START},
|
|
// R_START_M (11)
|
|
{R_START_M, R_CCW_BEGIN_M, R_CW_BEGIN_M, R_START},
|
|
// R_CW_BEGIN_M
|
|
{R_START_M, R_START_M, R_CW_BEGIN_M, R_START | DIR_CW},
|
|
// R_CCW_BEGIN_M
|
|
{R_START_M, R_CCW_BEGIN_M, R_START_M, R_START | DIR_CCW},
|
|
};
|
|
#else
|
|
// Use the full-step state table (emits a code at 00 only)
|
|
#define R_CW_FINAL 0x1
|
|
#define R_CW_BEGIN 0x2
|
|
#define R_CW_NEXT 0x3
|
|
#define R_CCW_BEGIN 0x4
|
|
#define R_CCW_FINAL 0x5
|
|
#define R_CCW_NEXT 0x6
|
|
|
|
const unsigned char ttable[7][4] = {
|
|
// R_START
|
|
{R_START, R_CW_BEGIN, R_CCW_BEGIN, R_START},
|
|
// R_CW_FINAL
|
|
{R_CW_NEXT, R_START, R_CW_FINAL, R_START | DIR_CW},
|
|
// R_CW_BEGIN
|
|
{R_CW_NEXT, R_CW_BEGIN, R_START, R_START},
|
|
// R_CW_NEXT
|
|
{R_CW_NEXT, R_CW_BEGIN, R_CW_FINAL, R_START},
|
|
// R_CCW_BEGIN
|
|
{R_CCW_NEXT, R_START, R_CCW_BEGIN, R_START},
|
|
// R_CCW_FINAL
|
|
{R_CCW_NEXT, R_CCW_FINAL, R_START, R_START | DIR_CCW},
|
|
// R_CCW_NEXT
|
|
{R_CCW_NEXT, R_CCW_FINAL, R_CCW_BEGIN, R_START},
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* Constructor Common
|
|
*/
|
|
void Rotary::Constructor_Common() {
|
|
// Set pins to input.
|
|
pinMode(pin1, INPUT);
|
|
pinMode(pin2, INPUT);
|
|
pinMode(btn, INPUT);
|
|
#ifdef ENABLE_PULLUPS
|
|
digitalWrite(pin1, HIGH);
|
|
digitalWrite(pin2, HIGH);
|
|
digitalWrite(btn, HIGH);
|
|
#endif
|
|
// Initialise state.
|
|
state = R_START;
|
|
}
|
|
|
|
/*
|
|
* Constructor. Each arg is the pin number for each encoder contact.
|
|
*/
|
|
Rotary::Rotary(char _pin1, char _pin2,char _btn) {
|
|
// Assign variables.
|
|
pin1 = _pin1;
|
|
pin2 = _pin2;
|
|
btn = _btn;
|
|
Constructor_Common();
|
|
}
|
|
|
|
|
|
Rotary::Rotary() {
|
|
// Assign variables to defaults
|
|
pin1 = ENCODER_A;
|
|
pin2 = ENCODER_B;
|
|
btn = ENCODER_BTN;
|
|
Constructor_Common();
|
|
}
|
|
|
|
|
|
unsigned char Rotary::process() {
|
|
// Grab state of input pins.
|
|
unsigned char pinstate = (digitalRead(pin2) << 1) | digitalRead(pin1);
|
|
// Determine new state from the pins and state table.
|
|
state = ttable[state & 0xf][pinstate];
|
|
// Return emit bits, ie the generated event.
|
|
return state & 0x30;
|
|
}
|
|
|
|
byte Rotary::buttonState() { // returns the state of the Encoder button LOW=pressed
|
|
// return byte(digitalRead(btn));
|
|
return digitalRead(btn);
|
|
}
|