kopia lustrzana https://github.com/SP8EBC/ParaTNC
504 wiersze
11 KiB
C
504 wiersze
11 KiB
C
/*
|
||
* config_data.h
|
||
*
|
||
* Created on: Jan 12, 2021
|
||
* Author: mateusz
|
||
*/
|
||
|
||
#ifndef CONFIG_DATA_H_
|
||
#define CONFIG_DATA_H_
|
||
|
||
#include <stdint.h>
|
||
|
||
/**
|
||
* This is NOT an editable configuration file where ParaTNC settings are made! Do not touch this!
|
||
* Please look at 'station_config.h' instead to set all parameters.
|
||
*/
|
||
|
||
/**
|
||
* This enum is used to configure how the ParaMETEO controller will switch to different powersave modes
|
||
*/
|
||
typedef enum config_data_powersave_mode_t {
|
||
|
||
/**
|
||
* Micro will be kept constantly in RUN mode, +5V_S, +5V_R and +4V_G will be kept on.
|
||
* This is suitable if station is powered from mains and needs to be operated as APRS
|
||
* digipeater and/or igate. Wind measurements will be very accurate as anemometer
|
||
* readings will be collected all the time
|
||
*/
|
||
PWSAVE_NONE = 0,
|
||
PWSAVE_NORMAL = 1,
|
||
PWSAVE_AGGRESV = 3
|
||
|
||
//PWSAVE_
|
||
|
||
|
||
}config_data_powersave_mode_t;
|
||
|
||
typedef struct __attribute__((aligned (4))) config_data_mode_t {
|
||
|
||
#define WX_ENABLED (1)
|
||
#define WX_INTERNAL_AS_BACKUP (1 << 1)
|
||
#define WX_INTERNAL_SPARKFUN_WIND (1 << 2)
|
||
|
||
#define WX_MODBUS_DEBUG (1 << 1)
|
||
|
||
#define WX_DUST_SDS011_PWM (1 << 1)
|
||
#define WX_DUST_SDS011_SERIAL (1 << 2)
|
||
|
||
uint8_t digi;
|
||
|
||
uint8_t wx;
|
||
|
||
uint8_t wx_umb;
|
||
|
||
uint8_t wx_modbus;
|
||
|
||
uint8_t wx_davis;
|
||
|
||
uint8_t wx_ms5611_or_bme; // set to one to choose bme, zero to ms5611
|
||
|
||
uint8_t wx_anemometer_pulses_constant; // #define _ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED 10
|
||
|
||
uint8_t wx_dust_sensor;
|
||
|
||
/**
|
||
* 0x00 or 0xFF - PT sensor disabled
|
||
* bit0 - enabled / disabled
|
||
* bit1 - PT100 (1) or PT1000 (0)
|
||
* bit2 through bit7 - resistor value from lookup table
|
||
* */
|
||
uint8_t wx_pt_sensor;
|
||
|
||
uint8_t victron;
|
||
|
||
uint8_t digi_viscous;
|
||
|
||
uint8_t digi_only_ssids;
|
||
|
||
uint8_t digi_viscous_delay_sec;
|
||
|
||
uint8_t digi_delay_100msec; // in 100msec increments
|
||
|
||
// only for ParaMETEO
|
||
config_data_powersave_mode_t powersave;
|
||
|
||
// only for ParaMETEO - keeps GSM modem always on if GSM is configured to be used
|
||
uint8_t powersave_keep_gsm_always_enabled;
|
||
|
||
// only for ParaMETEO
|
||
uint8_t gsm;
|
||
|
||
// only for ParaMETEO
|
||
uint8_t nvm_logger;
|
||
|
||
} config_data_mode_t;
|
||
|
||
typedef struct __attribute__((aligned (4))) config_data_basic_t {
|
||
|
||
#define ENGINEERING1 (1)
|
||
#define ENGINEERING1_INH_WX_PWR_HNDL (1 << 1)
|
||
#define ENGINEERING1_EARLY_TX_ASSERT (1 << 2)
|
||
#define ENGINEERING1_PWRCYCLE_GSM_ON_NOCOMM (1 << 2)
|
||
|
||
#define ENGINEERING2 (1)
|
||
#define ENGINEERING2_REBOOT_AFTER_24 (1 << 1)
|
||
#define ENGINEERING2_POWER_CYCLE_R (1 << 2)
|
||
|
||
char callsign[7];
|
||
|
||
uint8_t ssid;
|
||
|
||
float latitude;
|
||
|
||
// N or S
|
||
char n_or_s;
|
||
|
||
float longitude;
|
||
|
||
// E or W
|
||
char e_or_w;
|
||
|
||
char comment[128];
|
||
|
||
// 0 - _SYMBOL_DIGI // uncomment if you want digi symbol(green star with D inside)
|
||
// 1 - _SYMBOL_WIDE1_DIGI // uncomment if you want 'little' digi symbol (green star with digit 1 overlaid)
|
||
// 2 - _SYMBOL_HOUSE // uncomment if you want house symbol
|
||
// 3 - _SYMBOL_RXIGATE // uncomment if you want rxigate symbol (black diamond with R)
|
||
// 4 - _SYMBOL_IGATE // uncomment if you want igate symol (black diamond with I)
|
||
// 5 - _SYMBOL_SAILBOAT
|
||
uint8_t symbol;
|
||
|
||
// 0 - no path
|
||
// 1 - WIDE1-1 path
|
||
// 2 - WIDE2-1 path
|
||
uint8_t path_type;
|
||
|
||
uint8_t beacon_at_bootup;
|
||
|
||
uint8_t wx_transmit_period;
|
||
|
||
uint8_t beacon_transmit_period;
|
||
|
||
uint8_t wx_double_transmit;
|
||
|
||
/**
|
||
* bit0 - must be set to ZERO to enable this engineering
|
||
* bit1 - inhibit 'wx_pwr_switch_periodic_handle'
|
||
* bit2 - early_tx_assert
|
||
* bit3 -
|
||
* bit4 -
|
||
* bit5 -
|
||
* bit6 -
|
||
* bit7 -
|
||
*/
|
||
uint8_t engineering1;
|
||
|
||
/**
|
||
* Ugly and nasty workarounds of (mostly hardware) problems, which should
|
||
* be fixed, not inhibited by stupid workaround. Use only
|
||
* where there is no hope left.
|
||
*
|
||
* bit0 - must be set to ZERO to enable this engineering
|
||
* bit1 - reboot after 99 telemetry frames
|
||
* bit2 - power cycle vbat_r two minutes before weather frame
|
||
*/
|
||
uint8_t engineering2;
|
||
|
||
uint16_t battery_scalling_a;
|
||
|
||
uint16_t battery_scalling_b;
|
||
|
||
/**
|
||
* BUTTON_SEND_WX = 1,
|
||
BUTTON_SEND_WX_INTERNET = 2,
|
||
BUTTON_SEND_BEACON = 3,
|
||
BUTTON_FORCE_UART_KISS = 4,
|
||
BUTTON_FORCE_UART_LOG = 5,
|
||
BUTTON_RESET_GSM_GPRS = 6,
|
||
BUTTON_RECONNECT_APRSIS = 7,
|
||
*/
|
||
#define BUTTON_FUNCTION_SEND_WX 1U
|
||
#define BUTTON_FUNCTION_SEND_WX_INET 2U
|
||
#define BUTTON_FUNCTION_SEND_BEACON 3U
|
||
#define BUTTON_FUNCTION_UART_KISS 4U
|
||
#define BUTTON_FUNCTION_UART_LOG 5U
|
||
#define BUTTON_FUNCION_RESET_GSM_GPRS 6U
|
||
#define BUTTON_FUNCTION_RECONNECT_APRSIS 7U
|
||
|
||
|
||
uint8_t button_one_left;
|
||
|
||
uint8_t button_two_right;
|
||
|
||
#define CONFIGURATION_SEC_ROUTINE_READ_OFFSET 1U
|
||
#define CONFIGURATION_SEC_ROUTINE_ELSE_OFFSET 3U
|
||
#define CONFIGURATION_SEC_MEDIUM_APRSIS 1U
|
||
#define CONFIGURATION_SEC_MEDIUM_RADIO 2U
|
||
#define CONFIGURATION_SEC_MEDIUM_KISS 4U
|
||
/**
|
||
* Configuration of how UDS diagnostics are secured access different
|
||
* mediums. GET_VERSION_AND_ID and SECURITY_ACCESS are never locked
|
||
*
|
||
* READ_DID and READ_MEMORY
|
||
* bit 1 - APRSIS
|
||
* bit 2 - RF network communication
|
||
* bit 3 - KISS serial port communication
|
||
*
|
||
* everything else
|
||
* bit 4 - APRSIS
|
||
* bit 5 - RF network communication
|
||
* bit 6 - KISS serial port communication
|
||
*/
|
||
uint8_t uds_diagnostics_security_access;
|
||
|
||
} config_data_basic_t;
|
||
|
||
typedef enum config_data_wx_sources_enum_t {
|
||
/**
|
||
* Internal sensors are:
|
||
* - Dallas DS18B20 for temperature
|
||
* - MS5611 or BME280 for pressure/humidity
|
||
* - analog/mechanical anemometer for wind
|
||
*/
|
||
WX_SOURCE_INTERNAL = 1,
|
||
WX_SOURCE_INTERNAL_PT100 = 6,
|
||
|
||
/**
|
||
* Lufft UMB devices
|
||
*/
|
||
WX_SOURCE_UMB = 2,
|
||
|
||
/**
|
||
* RTU can be used for any measuremd parameter, but by default
|
||
* it is used for wind in the same way as the mechanic anemometer is.
|
||
* The controller asks for the windspeed and treat it as momentary value,
|
||
* which then is put into the circular buffer to calculate average and
|
||
* max from.
|
||
*/
|
||
WX_SOURCE_RTU = 3,
|
||
|
||
/**
|
||
* This option makes a difference only for wind measurements. With all
|
||
* other parameters it works exactly the same as WX_SOURCE_RTU. In this mode
|
||
* the controller queries for average and maximum wind speed.
|
||
*/
|
||
WX_SOURCE_FULL_RTU = 4,
|
||
WX_SOURCE_DAVIS_SERIAL = 5
|
||
} config_data_wx_sources_enum_t;
|
||
|
||
typedef struct __attribute__((aligned (4))) config_data_wx_sources_t {
|
||
|
||
config_data_wx_sources_enum_t temperature;
|
||
config_data_wx_sources_enum_t pressure;
|
||
config_data_wx_sources_enum_t humidity;
|
||
config_data_wx_sources_enum_t wind;
|
||
|
||
config_data_wx_sources_enum_t temperature_telemetry;
|
||
|
||
|
||
} config_data_wx_sources_t;
|
||
|
||
typedef struct __attribute__((aligned (4))) config_data_umb_t {
|
||
|
||
uint16_t slave_class;
|
||
|
||
uint16_t slave_id;
|
||
|
||
uint16_t channel_windspeed;
|
||
|
||
uint16_t channel_wingsusts;
|
||
|
||
uint16_t channel_winddirection;
|
||
|
||
uint16_t channel_temperature;
|
||
|
||
uint16_t channel_qnh;
|
||
|
||
uint16_t serial_speed;
|
||
/**
|
||
* #define _UMB_CHANNEL_WINDSPEED 460
|
||
#define _UMB_CHANNEL_WINDGUSTS 440
|
||
#define _UMB_CHANNEL_WINDDIRECTION 580
|
||
#define _UMB_CHANNEL_TEMPERATURE 100
|
||
#define _UMB_CHANNEL_QFE
|
||
*/
|
||
} config_data_umb_t;
|
||
|
||
typedef struct __attribute__((aligned (4))) config_data_rtu_t {
|
||
uint16_t slave_speed;
|
||
|
||
uint8_t slave_parity;
|
||
|
||
uint8_t slave_stop_bits;
|
||
|
||
uint8_t use_full_wind_data;
|
||
|
||
// sources
|
||
uint8_t temperature_source;
|
||
|
||
uint8_t humidity_source;
|
||
|
||
uint8_t pressure_source;
|
||
|
||
uint8_t wind_direction_source;
|
||
|
||
uint8_t wind_speed_source;
|
||
|
||
uint8_t wind_gusts_source;
|
||
|
||
// channel 1
|
||
uint8_t slave_1_bus_address;
|
||
|
||
uint8_t slave_1_function;
|
||
|
||
uint16_t slave_1_register_address;
|
||
|
||
uint16_t slave_1_lenght;
|
||
|
||
uint8_t slave_1_scaling_a;
|
||
|
||
uint8_t slave_1_scaling_b;
|
||
|
||
uint8_t slave_1_scaling_c;
|
||
|
||
uint8_t slave_1_scaling_d;
|
||
|
||
uint8_t slave_1_unsigned_signed;
|
||
|
||
// channel 2
|
||
uint8_t slave_2_bus_address;
|
||
|
||
uint8_t slave_2_function;
|
||
|
||
uint16_t slave_2_register_address;
|
||
|
||
uint16_t slave_2_lenght;
|
||
|
||
uint8_t slave_2_scaling_a;
|
||
|
||
uint8_t slave_2_scaling_b;
|
||
|
||
uint8_t slave_2_scaling_c;
|
||
|
||
uint8_t slave_2_scaling_d;
|
||
|
||
uint8_t slave_2_unsigned_signed;
|
||
|
||
// channel 3
|
||
uint8_t slave_3_bus_address;
|
||
|
||
uint8_t slave_3_function;
|
||
|
||
uint16_t slave_3_register_address;
|
||
|
||
uint16_t slave_3_lenght;
|
||
|
||
uint8_t slave_3_scaling_a;
|
||
|
||
uint8_t slave_3_scaling_b;
|
||
|
||
uint8_t slave_3_scaling_c;
|
||
|
||
uint8_t slave_3_scaling_d;
|
||
|
||
uint8_t slave_3_unsigned_signed;
|
||
|
||
// channel 4
|
||
uint8_t slave_4_bus_address;
|
||
|
||
uint8_t slave_4_function;
|
||
|
||
uint16_t slave_4_register_address;
|
||
|
||
uint16_t slave_4_lenght;
|
||
|
||
uint8_t slave_4_scaling_a;
|
||
|
||
uint8_t slave_4_scaling_b;
|
||
|
||
uint8_t slave_4_scaling_c;
|
||
|
||
uint8_t slave_4_scaling_d;
|
||
|
||
uint8_t slave_4_unsigned_signed;
|
||
|
||
// channel 5
|
||
uint8_t slave_5_bus_address;
|
||
|
||
uint8_t slave_5_function;
|
||
|
||
uint16_t slave_5_register_address;
|
||
|
||
uint16_t slave_5_lenght;
|
||
|
||
uint8_t slave_5_scaling_a;
|
||
|
||
uint8_t slave_5_scaling_b;
|
||
|
||
uint8_t slave_5_scaling_c;
|
||
|
||
uint8_t slave_5_scaling_d;
|
||
|
||
uint8_t slave_5_unsigned_signed;
|
||
|
||
// channel 6
|
||
uint8_t slave_6_bus_address;
|
||
|
||
uint8_t slave_6_function;
|
||
|
||
uint16_t slave_6_register_address;
|
||
|
||
uint16_t slave_6_lenght;
|
||
|
||
uint8_t slave_6_scaling_a;
|
||
|
||
uint8_t slave_6_scaling_b;
|
||
|
||
uint8_t slave_6_scaling_c;
|
||
|
||
uint8_t slave_6_scaling_d;
|
||
|
||
uint8_t slave_6_unsigned_signed;
|
||
|
||
|
||
} config_data_rtu_t;
|
||
|
||
typedef struct __attribute__((aligned (4))) config_data_gsm_t {
|
||
|
||
char pin[5];
|
||
|
||
char apn[24];
|
||
|
||
// username for APN connection
|
||
char username[24];
|
||
|
||
// password for APN connection
|
||
char password[24];
|
||
|
||
uint8_t api_enable;
|
||
|
||
// http://pogoda.cc:8080/meteo_backend
|
||
char api_base_url[64];
|
||
|
||
char api_station_name[32];
|
||
|
||
uint8_t aprsis_enable;
|
||
|
||
char aprsis_server_address[64];
|
||
|
||
uint16_t aprsis_server_port;
|
||
|
||
uint32_t aprsis_passcode;
|
||
|
||
uint8_t sms_wx_info;
|
||
|
||
char sms_wx_inf_first[12];
|
||
|
||
char sms_wx_inf_second[12];
|
||
|
||
} config_data_gsm_t;
|
||
|
||
/**
|
||
* This structure holds compatibility numbers, which are used to check if
|
||
* configuration data stored in the NVM is compatible with running software.
|
||
* It is useful after firmware upgrade, which doesn't alter the configuration
|
||
* data. Each config block has a separate entry here (like basic, mode, RTU).
|
||
* During startup, if CRC verification is passed the software reads uint32_t
|
||
* word for each config block, and compare with internally hardcoded value
|
||
* If value in NVM is bigger than what application has, the app AND that
|
||
* with a bitmask (also hardcoded) to check if it can safely ignore that.
|
||
*
|
||
* If it cannot ignore, the configuration is too new and supposedly
|
||
* not compatible. The application should then either restore default values,
|
||
* or switch to different interpretation of that data - at least do something.
|
||
*
|
||
* If the value from NVM is less than value from application (but not equal!!!)
|
||
* it is additionally ORed with another hardcoded bitmask. If a result of
|
||
* this OR is bigger than application
|
||
*
|
||
*
|
||
*/
|
||
typedef struct __attribute__((aligned (4))) config_data_compatibility_version_t {
|
||
|
||
uint64_t mode_block_compatiblity_number; // 8 bytes
|
||
|
||
uint64_t basic_block_compatiblity_number; // 8 bytes
|
||
|
||
uint64_t sources_block_compatiblity_number; // 8 bytes
|
||
|
||
uint64_t umb_block_compatiblity_number; // 8 bytes
|
||
|
||
uint64_t rtu_block_compatiblity_number; // 8 bytes
|
||
|
||
uint64_t gsm_block_compatiblity_number; // 8 bytes
|
||
|
||
uint64_t seventh_block_compatibility_number;
|
||
|
||
uint64_t eight_block_compatibility_number;
|
||
|
||
|
||
}config_data_compatibility_version_t;
|
||
|
||
#endif /* CONFIG_DATA_H_ */
|