diff --git a/.gitignore b/.gitignore
index 31dc307..fc432f4 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,2 +1,4 @@
 *.d
 *.o
+station_config.h
+Debug/
diff --git a/include/station_config_example.h b/include/station_config_example.h
new file mode 100644
index 0000000..f749397
--- /dev/null
+++ b/include/station_config_example.h
@@ -0,0 +1,112 @@
+/*
+ * config.h
+ *
+ *  Created on: 03.07.2017
+ *      Author: mateusz
+ */
+
+#ifndef STATION_CONFIG_H_
+#define STATION_CONFIG_H_
+
+// Only for debugging
+//#define _DBG_TRACE
+
+// Uncomment to enable all meteo functionality. TX20 anemometer, dallas termometer, MS5611 pressure sens
+//#define _METEO
+#define _DIGI		// Comment this do disable WIDE1-1 digipeating
+
+//#define _MUTE_RF	// TODO: Not yet implemented - This will make station RXonly and disable all data transmission
+//#define _MUTE_OWN	// TODO: Not yet implemented - This will disable all self-generated packets (wx, telemetry, beacon)
+					// and switch device to "pure" kiss TNC operation. Packets from PC will be transmitted normally.
+
+// Coordines should be in APRS decimal format DDDMM.SS for Longitude and DDMM.SS for latitude
+#define _CALL "NOCALL"
+#define _SSID 0
+#define _LAT		4900.00
+#define _LATNS		'N'
+#define _LON		01900.00
+#define _LONWE		'E'
+#define _COMMENT	"Modify this file to fit Your needs and rename it to station_config.h"
+
+// You can use only one of these below defines to choose symbol. Meteo data are are always transmitted with blue WX symbol
+//#define _SYMBOL_DIGI			// uncomment if you want digi symbol(green star with D inside)
+#define _SYMBOL_WIDE1_DIGI	// uncomment if you want 'little' digi symbol (green star with digit 1 overlaid)
+//#define _SYMBOL_HOUSE			// uncomment if you want house symbol
+//#define _SYMBOL_RXIGATE		// uncomment if you want rxigate symbol (black diamond with R)
+//#define _SYMBOL_IGATE			// uncomment if you want igate symol (black diamond with I)
+
+// Or you can keep commented all symbol defines and choose custom one based on data from APRS symbols table
+//#define _SYMBOL_F	'/'
+//#define _SYMBOL_S	'#'
+
+// Uncomment one of these two defines to choose what path You want. If you uncommend both of them or
+// if you keep both commended path will be completely disabled. CALL-S>AKLPRZ:data
+//#define _WIDE1_PATH		// CALL-S>AKLPRZ,WIDE1-1:data
+//#define _WIDE21_PATH	// CALL-S>AKLPRZ,WIDE2-1:data
+
+// Comment this to disable beacon auto sending during startup (this can be risky if RF feedback occur)
+//#define _BCN_ON_STARTUP
+
+#define _WX_INTERVAL 4		// WX packet interval in minutes
+#define _BCN_INTERVAL 15	// Own beacon interval in minutes
+
+#define _PTT_PUSHPULL // Uncomment this if you want PTT line to work as Push-pull instead of Open Drain
+#define _SERIAL_BAUDRATE 9600
+
+// Transmitting delay
+#define _DELAY_BASE 20	// * 50ms. For example setting 10 gives 500msec delay. Maximum value is 20
+//#define _RANDOM_DELAY	// adds random delay TO fixed time set by _DELAY_BASE. This additional time can be
+						// from 100ms up to 1 sec in 100ms steps. Values are drawn from samples going from ADC
+						// so it is better to use Unsquelched output in radio to provide much more randomness
+//After waiting time declared above ParaTNC will check DCD (Data Carrier Detect) flag, which works as some
+//kind of semaphore. If radio channel is not occupied by any other transmission TX will be keyed up immediately,
+//otherwise software will wait for clear conditions.
+
+// Few IMPORTANT hints about setting transmit delay properly.
+//
+// Transmit delay is key parameter to maintain RF network free from packet losses and collisions. If your station will be
+// installed on tall object, without any other digi's close to it, you can set _DELAY_BASE to very low value and disable
+// _RANDOM_DELAY. If you wanna rather auxiliary station, witch should only fill gap in RF coverage in small area, then
+// _DELAY_BASE parameter should be not less than 12 (600msec), the smallest range the higher _DELAY_BASE should be.
+// Additionally for gapfillers (auxiliary stations) _RANDOM_DELAY schould be enabled.
+//
+// This delay will ensure that while other station will be transmitting repeated packets from mobile, Yours will keep
+// always quiet and won't jam RF network. This greatly improve DCD based access to channel. Various controllers uses
+// various lenght of preamble, some of them produce signal which might be impossible to decode by ParaTNC, so DCD
+// is only one part of effective multiaccess to medium.
+
+
+// Do not touch this
+#if defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
+	!defined (_SYMBOL_IGATE)
+#define _SYMBOL_F	'/'
+#define _SYMBOL_S	'#'
+#elif !defined (_SYMBOL_DIGI) && defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
+	!defined (_SYMBOL_IGATE)
+#define _SYMBOL_F	'1'
+#define _SYMBOL_S	'#'
+#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
+	!defined (_SYMBOL_IGATE)
+#define _SYMBOL_F	'/'
+#define _SYMBOL_S	'-'
+#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && defined (_SYMOL_RXIGATE) &&\
+	!defined (_SYMBOL_IGATE)
+#define _SYMBOL_F	'I'
+#define _SYMBOL_S	'&'
+#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
+	defined (_SYMBOL_IGATE)
+#define _SYMBOL_F	'R'
+#define _SYMBOL_S	'&'
+#elif !defined (_SYMBOL_F) && !defined (_SYMBOL_S)
+#error "Missing symbol configuration in station_config.h"
+#elif defined (_SYMBOL_F) && defined (_SYMBOL_S)
+#else
+#error "Wrong symbol configuration in station_config.h"
+#endif
+#if defined (_METEO) && !defined (_DIGI)
+#define _DIGI
+#endif
+
+
+
+#endif /* STATION_CONFIG_H_ */