kopia lustrzana https://github.com/SP8EBC/ParaTNC
updated readme and openocd configuration
Mateusz Lubecki
rodzic
4650a52af7
commit
32355827fd
|
|
@ -0,0 +1,2 @@
|
|||
eclipse.preferences.version=1
|
||||
executable.name=/usr/bin/openocd
|
||||
|
|
@ -91,6 +91,5 @@ clean:
|
|||
secondary-outputs: $(SECONDARY_FLASH) $(SECONDARY_SIZE)
|
||||
|
||||
.PHONY: all clean dependents
|
||||
.SECONDARY:
|
||||
|
||||
-include ../makefile.targets
|
||||
|
|
|
|||
42
README
42
README
|
|
@ -157,7 +157,7 @@ The KISS modem runs on default speed of 9600 bps. Telemetry is enabled by defaul
|
|||
trasmit channels values each 10 minutes and full channel descriptions each 70 minutes.
|
||||
|
||||
|
||||
9. TOOLCHAIN AND COMPILATION
|
||||
9. TOOLCHAIN
|
||||
To build the ParaTNC software 'GNU ARM Embedded Toolchain' is required. This set contains gcc-arm-none-eabi compiler,
|
||||
gdb debugger, linker, HEX generator and set of libraries. ParaTNC is developed in Xubuntu 16.04LTS and 20.04LTS
|
||||
using toolchain in version 2018q-2. Please take note that You have to use 64-bit version of the operation system
|
||||
|
|
@ -171,17 +171,33 @@ Alternatively You can use this link: http://pogoda.cc/d/gcc-arm-none-eabi-7-2018
|
|||
After download the content of this archive has to be uncompressed into: /usr/local/bin/gcc-arm-none-eabi-7-2018-q2-update/
|
||||
so the structure should looks like this
|
||||
|
||||
mateusz@mateusz-ThinkCentre-M720q:/usr/local/bin/gcc-arm-none-eabi-7-2018-q2-update$ ls -la
|
||||
total 24
|
||||
drwxrwxr-x 6 mateusz mateusz 4096 paź 10 08:35 .
|
||||
drwxr-xr-x 7 root root 4096 paź 10 18:06 ..
|
||||
drwxr-xr-x 6 mateusz mateusz 4096 cze 22 2018 arm-none-eabi
|
||||
drwxr-xr-x 2 mateusz mateusz 4096 cze 22 2018 bin
|
||||
drwxr-xr-x 3 mateusz mateusz 4096 cze 22 2018 lib
|
||||
drwxr-xr-x 4 mateusz mateusz 4096 cze 22 2018 share
|
||||
mateusz@mateusz-ThinkCentre-M720q:/usr/local/bin/gcc-arm-none-eabi-7-2018-q2-update$
|
||||
mateusz@mateusz-ThinkCentre-M720q:/usr/local/bin/gcc-arm-none-eabi-7-2018-q2-update$ ls -la
|
||||
total 24
|
||||
drwxrwxr-x 6 mateusz mateusz 4096 paź 10 08:35 .
|
||||
drwxr-xr-x 7 root root 4096 paź 10 18:06 ..
|
||||
drwxr-xr-x 6 mateusz mateusz 4096 cze 22 2018 arm-none-eabi
|
||||
drwxr-xr-x 2 mateusz mateusz 4096 cze 22 2018 bin
|
||||
drwxr-xr-x 3 mateusz mateusz 4096 cze 22 2018 lib
|
||||
drwxr-xr-x 4 mateusz mateusz 4096 cze 22 2018 share
|
||||
mateusz@mateusz-ThinkCentre-M720q:/usr/local/bin/gcc-arm-none-eabi-7-2018-q2-update$
|
||||
|
||||
Both a makefile and an Eclipse project are configured to look for toolchain in this directory.
|
||||
Both a makefile and an Eclipse project are configured to look for toolchain in this directory. In some cases to perform
|
||||
a debugging in Elipse You will have to install libncurses5 library which is required to start GDB. To check if
|
||||
this is a case try to start the debugger manually by issuing such command in the prompt
|
||||
|
||||
'/usr/local/bin/gcc-arm-none-eabi-7-2018-q2-update/bin/arm-none-eabi-gdb --version'
|
||||
|
||||
If such result will be printed in the console, libncurses5 must be installed, prefferably using system package
|
||||
manager like aptitude in Debian/Ubuntu
|
||||
|
||||
'libraries: libncurses.so.5: cannot open shared object file: No such file or directory'
|
||||
|
||||
To start debugging session in Eclipse you must create new 'GDB OpenOCD Debugging' configuration and set paths
|
||||
to OpenOCD and GDB in 'Debugger' tab. OpenOCD usually sits in '/usr/bin/openocd', the path to GDB is shown in
|
||||
the paragraph before. Remember to set 'Config Options:' to tell the OpenOCD what JTAG adapter/debugger is used
|
||||
in Your setup. If You're using ST-Link/V2 paste '-f interface/stlink-v2.cfg -f target/stm32f1x_stlink.cfg'
|
||||
|
||||
10. DOWNLOADING THE SOURCE CODE AND COMPILING IT
|
||||
|
||||
When everything is installed the reporistory can be cloned to local harddrive by using a command
|
||||
'git clone https://github.com/sp8ebc/ParaTNC'
|
||||
|
|
@ -207,7 +223,7 @@ application which doesn't works exactly as it should because of optimalization c
|
|||
|
||||
22:29:38 Build Finished (took 13s.231ms)
|
||||
|
||||
10. LOADING THE HEX FILE USING SERIAL BOOTLOADER
|
||||
11. LOADING THE HEX FILE USING THE SERIAL BOOTLOADER
|
||||
If You don't have a JTAG programmer/debugger or You just not want to or can't use it for any reason, You can choose
|
||||
Internal Serial Bootloader provided by STMicroelectronics. It's code is stored in mask ROM within microcontroler
|
||||
and can be used anytime, and in scope of ParaTNC it practically cannot be disabled or locked. Please remember that
|
||||
|
|
@ -225,7 +241,7 @@ relay clicking and LEDs blinking for a short while. After the power supply is co
|
|||
you can disconnect the jumper and start the FlashLoader software to download the HEX file to micro. After process is done
|
||||
you should do a cold reset without jumper shorter.
|
||||
|
||||
11. LOADING THE HEX FILE INTO STM32VLDISCOVERY BOARD
|
||||
12. LOADING THE HEX FILE INTO STM32VLDISCOVERY BOARD
|
||||
The STM32VLDISCOVERY board has an ST-Link/V1 programmer-debugger on board which can be used to load a HEX file.
|
||||
This ST-Link appears normally as a mass storage device which makes in unusable to be used by HEX loadin software
|
||||
in Linux (as the device will be 'blocked' by the mass-storage driver). To workaround this problem, a configuration
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue