kopia lustrzana https://github.com/jgromes/RadioLib
69 wiersze
2.1 KiB
C++
69 wiersze
2.1 KiB
C++
/*
|
|
RadioLib LoRaWAN Starter Example
|
|
|
|
This example joins a LoRaWAN network and will send
|
|
uplink packets. Before you start, you will have to
|
|
register your device at https://www.thethingsnetwork.org/
|
|
After your device is registered, you can run this example.
|
|
The device will join the network and start uploading data.
|
|
|
|
Running this examples REQUIRES you to check "Resets DevNonces"
|
|
on your LoRaWAN dashboard. Refer to the network's
|
|
documentation on how to do this.
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
|
|
For LoRaWAN details, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/LoRaWAN
|
|
|
|
*/
|
|
|
|
#include "config.h"
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
while (!Serial);
|
|
delay(5000); // Give time to switch to the serial monitor
|
|
Serial.println(F("\nSetup ... "));
|
|
|
|
Serial.println(F("Initalise the radio"));
|
|
int state = radio.begin();
|
|
debug(state != RADIOLIB_ERR_NONE, F("Initalise radio failed"), state, true);
|
|
|
|
Serial.println(F("Join ('login') to the LoRaWAN Network"));
|
|
state = node.beginOTAA(joinEUI, devEUI, nwkKey, appKey, true);
|
|
debug(state < RADIOLIB_ERR_NONE, F("Join failed"), state, true);
|
|
|
|
Serial.println(F("Ready!\n"));
|
|
}
|
|
|
|
|
|
void loop() {
|
|
Serial.println(F("Sending uplink"));
|
|
|
|
// Read some inputs
|
|
uint8_t Digital1 = digitalRead(2);
|
|
uint16_t Analog1 = analogRead(3);
|
|
|
|
// Build payload byte array
|
|
uint8_t uplinkPayload[3];
|
|
uplinkPayload[0] = Digital1;
|
|
uplinkPayload[1] = highByte(Analog1); // See notes for high/lowByte functions
|
|
uplinkPayload[2] = lowByte(Analog1);
|
|
|
|
// Perform an uplink
|
|
int state = node.sendReceive(uplinkPayload, sizeof(uplinkPayload));
|
|
debug((state != RADIOLIB_LORAWAN_NO_DOWNLINK) && (state != RADIOLIB_ERR_NONE), F("Error in sendReceive"), state, false);
|
|
|
|
Serial.print(F("Uplink complete, next in "));
|
|
Serial.print(uplinkIntervalSeconds);
|
|
Serial.println(F(" seconds"));
|
|
|
|
// Wait until next uplink - observing legal & TTN FUP constraints
|
|
delay(uplinkIntervalSeconds * 1000UL); // delay needs milli-seconds
|
|
}
|